Tag Archives: bite marks

Reconditioning a Stunning Rungsted Mariner Freehand by Preben Holm

What a Tired and Worn Pair of Cased 1919 Charles Mass Pipes – Part 2: An Exhausted Billiard

Blog by Steve Laug

This restoration is Part 2 of one that started with an email from a reader of the blog name Tim. He had written the following email to me with a request. I have included that email below.

Hello Steve, I have a cased set of 1919 Charles Maas pipes that have been smoked hard and put away wet. Can I send them to you to have them restored? I’m a huge fan of your work and use your site often as inspiration, but these are outside my ability. – Tim

I finished the restoration of the Bulldog first and have written about the work on the blog already. Here is the link (https://rebornpipes.com/2021/05/30/what-a-tired-and-worn-pair-of-cased-1919-charles-mass-pipes-part-1-a-weary-bulldog/).

I am including the photos that Tim Sent me so you can see them if you have not read Part 1 of the blog on the Bulldog. Tim’s package arrived on Thursday and when I got home from work I opened it to have a look at the pipes first hand. I took the case out of the well packed box and this is what I saw. The case was suede with a fine leather edge around the sides. There was a thin gold line around the case edges. When I opened it I saw Tim’s 1919 label and the two pipes. There was a gold banded Bulldog and a nice stubby billiard. Both were nicely carved bowls and both had been heavily used and worn.

I sent Tim the following list summarizing the damages on the Billiard (a similar list is on the blog about the Bulldog). There is a lot of work to do to bring these back to life.

The billiard:
1. The rim top is badly damaged leaving the top uneven and thicker/taller toward the back of the bowl and more damaged than even the Bulldog.
2. The inner edge of the bowl is thicker than the bulldog but still thinner on the front side than the rest of the bowl. It is still thick enough.
3. The outer edge is chipped and uneven on the bowl front showing some burn marks.
4. The finish is worn and damaged with paint marks on the surface.
5. The bowl is slightly out of round with chips and marks on the inner edge
6. The stem has deep compressions from tooth marks on both sides at the button. 7. The inside of the bowl is badly checked and will need to examined for integrity.

Both pipes had been reamed and they were quite clean inside. It appeared that previous earlier reaming somewhere along the way had left the inner edge chipped and damaged. That is the assessment of the Billiard and it is clear from the list that there is a lot of work to do on it.

For background on the Charles Maas brand read the previous blog to get a clear idea of the history of the company. I will not include it again at this point. Here is another copy of the link for ease of reference (https://rebornpipes.com/2021/05/30/what-a-tired-and-worn-pair-of-cased-1919-charles-mass-pipes-part-1-a-weary-bulldog/).

It was time to work on the second pipe – the Billiard. It was surprisingly clean. The bowl had been reamed and the airways cleaned. (I later found out that Tim had done the clean up for me. Thanks Tim!)There was no stamping on the shank of the pipe. There was no gold band to identify it as a Charles Maas pipe like the one on the Bulldog. However it was obvious that the case was custom fitted to this little Billiard so that is proof enough for me. I took some photos of the pipe before I began, to catalogue what I saw before I started. I took some close up photos of the rim top and the stem surfaces. You can see the chipping and damage to the top and inner edges of the bowl. The top is significantly lower on the front of the bowl with burn marks and charring to the top and front of the bowl. The stem shows some deep tooth marks on both sides ahead of the button.I took some photos of the rim from various angles to show the serious damage to the bowl top and edges. It really is a mess and will be an interesting challenge to rebuild.I removed the stem from the shank and took a photo of the left side of the pipe as it really gave a good picture of what the pipe must have looked like when new.I decided to start work on this pipe by addressing the damaged rim top and edges. I built up the front edge of the bowl with briar dust and clear CA glue. My goal was to bring it up as close as possible to the height of the bowl on the left side. It took a bit of layering to get there. I also filled in the damage on the front outer edge of the bowl at the same time. Once I had the height as even as possible I would top the bowl on a topping board with 180 grit sandpaper to smooth out the rim top.Once I had it close to even I topped it on a topping board with 180 grit sandpaper. I took a few photos of the front and sides of the bowl to show what the repair looked like at this point in the process. There is still work to do but it is definitely getting there. I sanded the repair on the front of the bowl a bit as well. Much work to do! I worked over the top and edges of the bowl – both inner and outer edges, with 220 grit sandpaper to capture the original shape as much as possible. You can see the repaired areas on the rim top and edges from the photos below. I am pretty pleased with the overall appearance of the cap and top at this point in the process. The repairs are very clear at this point. I still had work to do on the rim top and outer edges but I also wanted to work on the inner edge. I repaired the damage there with the super glue and briar dust as well. I was not looking to build it up too much but to take care of the deep cuts and gouges on the left front of the edge. I sanded the repair with 180 and 220 grit sandpaper and I was happy with what I was seeing at this point in the process. I worked some more on the inner edge of the bowl with a piece of 220 grit sandpaper wrapped around a piece of dowel. I wanted to smooth out the inside of the bowl and the inner edges of the rim.I decided to give the repaired edge and top a quick coat of Walnut stain to see what it looked like. I find that doing this often shows flaws that need to be addressed in the repair and makes it easier to see where I am with the top and edges. I started the polishing process with 1500-2400 grit micromesh sanding pads. I dry sanded with the pads in preparation for restaining the bowl. After each pad I wiped the bowl down with a damp cloth. My goal was to remove the scratching left behind by the repairs to the rim top and cap. I was able to remove them. Once it was smooth the briar was ready for staining. I stained it with a Feibing’s Light Brown aniline stain. I applied it and flamed it with a lighter to set it in the grain. I repeated the process until the coverage of the briar was good. I set it aside to let the stain cure.I buffed pipe with Blue Diamond on the buffing wheel to remove the crusty coat of stain. I then polished it with the remaining micromesh pads -3200-12000 grit pads. I wiped it down after each pad with a damp cloth. I worked some Before & After Restoration Balm into the surface of the briar of the bowl with my finger tips. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. I set the bowl aside and turned to work on the stem. I “painted” the stem with the flame of a Bic lighter to try to lift the tooth marks in the surface on both sides. I was able to lift it some but not completely. I filled in the remaining dents with clear CA glue and set it aside to cure. Once they cured I used a small file to recut the button edge and flatten the repairs to blend them into the surface. I sanded the stem with 220 grit sandpaper to remove the remaining oxidation on the saddle and also to further blend in the repairs. I started the polishing with 400 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – wet sanding with 1500-12000 grit pads. I wiped the stem down after each sanding pad with Obsidian Oil. I finished polishing the surface with Before & After Pipe Stem Polish – both fine and extra fine. I gave the stem a final coat of Obsidian Oil and let it dry. I am really happy with the way that the rebuild of the rim and cap worked on on this Charles Maas Billiard (the second of two in a cased set). It really is a great looking pipe with lots of character. The old style hard rubber mouthpiece really look good with the brown of the briar. The grain really came alive with the buffing and a sense of depth came out with the polishing and waxing. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Charles Maas Billiard really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 4 ¼ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 1/8 inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 27 grams/.95 oz. The pipe will be going back to Tim with the Bulldog that I have finished. I think this little cased set is a real beauty.Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!

What a Tired and Worn Pair of Cased 1919 Charles Mass Pipes – Part 1: A Weary Bulldog

3 Replies

Blog by Steve Laug

This restoration started with an email from a reader of the blog name Tim. He had written the following email to me with a request. I have included that email below.

The first thing that caught me was the age of the pipes. I am a real sucker for old briar. The next thing that grabbed my attention was the brand – Charles Maas. That is a brand that I have not worked on and not heard of and it is English! The third thing that grabbed my attention was that they were a cased pair – which can often mean matching briar. All of those things conspired against my resolve to not add more work to the queue right now because of the demands of my day job and my own large number of restorations awaiting attention. I wrote him back and asked for pictures of the pipes to see if that would save me or draw me in further. Tim responded with photos and the magic words – I am not in a hurry!

Hi Steve, Here are the pictures. I’m not in a hurry.

I looked through the photos and assessed what needed to be done and took the plunge. I had Tim mail them to me. I was hooked and completely drawn into the project.Tim’s package arrived on Thursday and when I got home from work I opened it to have a look at the pipes first hand. I took the case out of the well packed box and this is what I saw. The case was suede with a fine leather edge around the sides. There was a thin gold line around the case edges. When I opened it I saw Tim’s 1919 label and the two pipes. There was a gold banded Bulldog and a nice stubby billiard. Both were nicely carved bowls and both had been heavily used and worn.I took the pipes out of the case and took pictures after I examined each of them to assess what needed to be done. They really are a classic set that should look great once finished. I made the following list summarizing the damages on the pipes and sent it to Tim. There is a lot of work to do to bring these back to life.

The Bulldog:
1. The rim top is badly damaged leaving the top uneven and thicker/taller toward the back of the bowl.
2. The inner edge of the bowl is quite thin on the front side from burning and over reaming of the bowl.
3. The outer edge is chipped and uneven on the bowl front.
4. The finish is worn and damaged with signs of burn darkening all around the rim cap.
5. The band has a ragged edge on the top, rear corner of the diamond shaped band.
6. The stem has deep compressions from tooth marks on both sides at the button
7. The inside of the bowl has some checking but they are not as deep as those on the billiard.

Both pipes have been heavily reamed and they were quite clean inside. It appeared that previous earlier reaming somewhere along the way had left the inner edge chipped and damaged. That is the assessment of both bowls and it is clear from the list that there is a lot of work to do on both of them.

It was time to work on the pipes. I chose to deal with the Bulldog first (Part 1). If you were to ask me why I actually have no idea even though it is first above. I took some photos of the pipe before I began, to catalogue what I saw before I started. It was surprisingly clean. The bowl had been reamed and the airways cleaned. There was no stamping on the shank of the pipe. The gold band had hallmarks on it that Tim had said led him to the 1919 date for the pipes. The hallmarks are CM in an oval which is the mark for Charles Maas. To the right of that is a “6” in s diamond followed by 375 which is the mark for 37.5% or 9 carat gold. That is followed by a “d” and another mark that could be a lion’s head which indeed identifies the pipe as London Made and “d” identifies it as a 1919 pipe.

I turned to an English silver and gold hallmark guide to see if I could find information on the maker CM (http://www.silvercollection.it/ENGLAMAAS.html). Sure enough it was very clear that the CM in and oval linked to Charles Maas. I have included the information from the site on the brand.

Charles Leopold Maas was active in London from 1883 at 13 Jewin Crescent, EC as manufacturer and importer of smokers’ pipes of various types, including “recherché” and “meerschaum”.

The firm entered various silver hallmarks as pipes were often silver-mounted as were manufactured in precious metal many of its smokers’ accessories and walking sticks.

In 1890 (London) and 1910 (Chester) Charles Maas entered a conjoined hallmark with Marcus Maas (manager).

In 1910 the firm removed to 1A Aldermanbury Avenue. Interesting to note that from 1891 the firm used a hallmark “CM surmounted by a crown” to characterize its “Unsurpassed quality Corona Mounts”. The punches with the crown were cancelled on request of Charles Maas having the Sheffield Assay Office written on 28 February 1896 that the crown represents their hallmark and is objectionable. The firm was converted into a limited liability company in c. 1915. I took some close up photos of the rim top and the stem surfaces. You can see the chipping and damage to the top and inner edges of the bowl. The left side is thin toward the front of the bowl. The stem shows some deep tooth marks on both sides ahead of the button.I removed the stem from the shank and took a photo of the left side of the pipe as it really gave a good picture of what the pipe must have looked like when new.I decided to start work on this pipe by addressing the damaged rim top and edges. I built up the front edge of the bowl with briar dust and clear CA glue. My goal was to bring it up as close as possible to the height of the bowl on the left side. It took a bit of layering to get there. I also filled in the damage on the front outer edge of the bowl at the same time. Once I had the height as even as possible I topped the bowl on a topping board with 180 grit sandpaper.Once I had it topped I took a few photos to show what it looked like at this point in the process. There is still work to do but it is definitely getting there. I sanded the repair on the front of the bowl a bit as well. Much work to do!I worked over the shape of the rim cap and rim top with 220 grit sandpaper and small files to capture the original shape as much as possible. You can see the build up on the rim top and edges from the photos below. I am pretty pleased with the overall appearance of the cap and top at this point in the process. The repairs are very clear at this point.I still had work to do on the rim top and cap but I also wanted to work on the inner edge. I repaired the damage there with the super glue and briar dust as well. I was not looking to build it up too much but to take care of the deep cuts and gouges on the left front of the edge. I sanded the repair with 180 and 220 grit sandpaper and I was happy with what I was seeing at this point in the process.I decided to give the repaired edge and top a quick coat of Walnut stain to see what it looked like. I find that doing this often shows flaws that need to be addressed in the repair and makes it easier to see where I am with the top and edges. There was still a long way to go to get it the way I wanted but it was truly beginning to take shape. I used a knife blade small file to clean up the twin rings around the repair on the front of the bowl. I started the polishing process with 1500-2400 grit micromesh sanding pads. I dry sanded with the pads in preparation for restaining the bowl. After each pad I wiped the bowl down with a damp cloth. My goal was to remove the scratching left behind by the repairs to the rim top and cap. I was able to remove them.Once it was smooth the briar was ready for staining. I stained it with a Feibing’s Light Brown aniline stain. I applied it and flamed it with a lighter to set it in the grain. I repeated the process until the coverage of the briar was good.I buffed pipe with Blue Diamond on the buffing wheel to remove the crusty coat of stain. I then polished it with the remaining micromesh pads -3200-12000 grit pads. I wiped it down after each pad with a damp cloth.I worked some Before & After Restoration Balm into the surface of the briar of the bowl with my finger tips and a horse hair shoe brush to work it into the grooves around the bowl cap. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. I set the bowl aside and turned to work on the stem. I “painted” the stem with the flame of a Bic lighter to try to lift the tooth marks in the surface on both sides. I was able to lift it some but not completely. I filled in the remaining dents with clear CA glue and set it aside to cure. Once they cured I used a small file to recut the button edge and flatten the repairs to blend them into the surface. I sanded the stem with 220 grit sandpaper to remove the remaining oxidation on the saddle and also to further blend in the repairs. I started the polishing with 400 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – wet sanding with 1500-12000 grit pads. I wiped the stem down after each sanding pad with Obsidian Oil. I finished polishing the surface with Before & After Pipe Stem Polish – both fine and extra fine. I gave the stem a final coat of Obsidian Oil and let it dry. I am really happy with the way that the rebuild of the rim and cap worked on on this Charles Maas Bulldog (the first of two in a cased set) turned out. It really is a great looking pipe with lots of character. The old style hard rubber mouthpiece and the gold band really look good with the brown of the briar. The grain really came alive with the buffing and a sense of depth came out with the polishing and waxing. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Charles Maas Bulldog really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 4 ½ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 23 grams/.81 oz. The pipe will be going back to Tim once I have finished the little billiard. I think this little cased set is a real beauty.Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!

There is something about this French Made 9465 Liverpool that just grabs me

2 Replies

Blog by Steve Laug

Sometimes when you are pipe hunting there is one that just grabs you. That was the case with this pipe as well as several of the previous pipes. It is a classic Liverpool shaped pipe with a clear Perspex stem. We have picked up a lot of pipes over the years, whether GBD or others that have had either the clear Perspex stem or a clear acrylic stem we obviously are attracted to the unique look of them. We picked this little pipe up from a fellow in Brazil, Indiana, USA early in 2020 and are finally getting around to working on it. The pipe was stamped on the right side of the shank and reads France [over] the shape number 9465. The shape number points to a French Made GBD pipe as does the stem but there is no GBD logo on either the stem of the shank of the pipe. It was in filthy condition. The bowl was thickly caked and there was a thick lava overflow in the rim top. It was easy to assume there was some darkening and burn damage under the grime but the cleaning would reveal the full story. The briar was very dirty with grit and grime ground into the surface. The clear Perspex stem was dirty and had darkening from tobacco stains in the airway from the tenon to the button. There were light deep tooth marks and chatter on the top and the underside of the stem near the button. Jeff took photos of the pipe before he did his clean up on it. Jeff took photos of the rim top and the stem to show the condition of the pipe when we received it. You can see the cake in the bowl and the lava on the rim top. It is hard to know the condition of the rim edges with certainty until the pipe is clean. The stem is Perspex and has staining from the tobacco in the airway in the tenon and stem. There is chatter and light tooth marks on both sides near the button. He took photos of the sides of the bowl and the heel to give an idea of the shape and the condition of the briar around the bowl. It really is a nicely shaped pipe that has classic charm and elegance.The pipe is stamped solely on the right hand side of the shank and does not appear to have any buffed out or partial stamping anywhere else on the pipe. It clearly reads France [over] 9465 as noted above. I am still thinking it is a French GBD but the research that follows will tell.I turned first to Pipedia to read about the time frame when GBD moved from Paris/St. Claude France to England (https://pipedia.org/wiki/GBD). That would help to narrow down the date the pipe was made. I quote the pertinent information from the article below.

There is a very simple explanation for GBD’s program to turn more “British”: GBD became a British company soon after the turn of the century! In 1902 Marechal and Ruchon sold GBD to A. Oppenheimer & Co. in London. Charles Oppenheimer had founded this successful trade business in 1860 as an import-/export house. His brothers David and Adolphe and brother-in-law Louis Adler soon joined him. Adolphe took over when Charles went to Germany as British ambassador. Briar pipes were among the first products traded. The business relation to GBD in Paris began as early as 1870. Being the most important customer in the English speaking world, Oppenheimer & Co. were designated as sole distributor for Great Britain, the USA and Canada in 1897. Especially Adolphe Oppenheimer had a burning interest in the pipe business, and Louis’ son James Adler shared that. He should play the most important role in the amicable merger of GBD. A. Marechal, Ruchon and Cie. in Paris was now Marechal, Ruchon & Co. Ltd. (see Marechal Ruchon & Cie. page) – a British firm with four directors: Adolphe Oppenheimer and James Adler had their seat in the head office in London while Auguste Marechal and Ferdinand Ruchon went on leading the GBD factory in the Rue des Balkan in Paris, which was considerably extended and modernised. Ruchon acted as CEO.

At the same time when the negotiatios with GBD started Oppenheimer also acquired two pipe factories in Saint-Claude: Sina & Cie. and C.J. Verguet Freres. Merging them a huge plant came into being that was thoroughly reconstructed and reorganized. The management was headed by Lucien Verguet. This new Saint-Claude factory was ready to operate in 1906. Beside it’s very own commercial activities in pipe production it’s main task was to supply prefabricated bowls.

Simultaneously Oppenheimer started to build a pipe factory in London. It was opened in 1903, but the forecasts had been over-optimistic for it’s capacity could not be utilized to the full until World War I. Things changed as the French pipe factories lacked more and more workers who were called to the front. In 1916 the ledgers registered that 18,000 of 27,000 dozens bowls manufactured in Saint-Claude were determined via GBD Paris for GBD London. Wherewith London had become the more important location.

After the war, GBD continued production both in London and in Paris. London GBDs mainly went into the national trade and as well into the British Empire and the USA. Paris on the other hand served the French and the other European markets. The location of the factories influenced the GBD history furthermore in the future although later on the products of both countries occasionally were marketed side to side to match special market requests.

Now I knew that it probably came post WWI when the French side of the company served the European Markets. There is no indication of the pipe being made in St. Claude so my thinking it is a French made pipe that at least entered the market through Paris.

I followed the links on the article to the GBD shape numbers article to link the shape stamp to GBD (https://pipedia.org/wiki/GBD_Shapes/Numbers). Sure enough the 9465 was a GBD shape number and it matches the pipe I am working on. I have included a screen capture of the section on the shape chart below.I have to say that once again I was looking forward to what Jeff had done to this French Made GBD Liverpool pipe when I took it out of the box. It had shown such beauty through the grime so I was quite sure it would be stunning. He reamed the bowl with a PipNet pipe reamer and cleaned the remnants of cake back with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and oils. He cleaned the internals of the shank with pipe cleaners, cotton swabs and alcohol to remove all of the tars and oils there. He scrubbed the interior and the exterior of the stem with Soft Scrub. He was able to remove much of the tobacco darkening on the inside of the stem. There is still some on the tenon and the middle of the airway that I will need to work on. He rinsed off the cleaner with warm water and wiped the bowl and stem down with a light coat of olive oil to rehydrate both. The pipe really was quite stunning. You can see the burn mark/charring on the front top and inner edge of the bowl but it does not lessen the beauty of the pipe. I took close up photos of the stem and the rim top to show both how clean they were and what needed to be addressed with both. The bowl had some burn damage on the front top and inner edge. The stem looked better but the tobacco staining in the airway and tenon were bothersome to me. The tooth chatter on both sides was still present. I would need to work on those issues with the stem to bring it back.I took another photo of the stamping on the shank side. You can see how clear and readable it is.I decided to addressing the burn damage to the front inner edge and rim top. I used a folded piece of 180 grit sandpaper to smooth out the damage and work on the inner edge bevel to minimize the burn damage.There was a deep gouge on the right side of the bowl. I filled it in with some clear CA glue and when the repair cured I sanded it smooth with 220 grit sandpaper to blend it into the surface. I polished the repair and the rest of the briar with micromesh sanding pads – wet sanding with 1500-12000 grit pads. I wiped the briar down after each pad. The grain began to really come alive through the polishing. I worked some Before & After Restoration Balm into the surface of the briar of the bowl with my finger tips. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. I set the bowl aside and turned my attention to the stem. The stem had quite a bit of residual stain in the airway and on the tenon interior. The picture to the left shows the remainder in the airway. I forgot to take a photo of the tenon before I started working on it.
I used small round and oval needle files to work over the inside of the airway. I entered from the tenon end and worked the back and forth and around to remove the remnant and smooth out the walls of the airway. I have found that often the drilling on the stem is rough on the inside and it collects this debris and even if it looks clean there is tar trapped in the valleys of the drilling. The files smoothed it out very well. I followed that with pipe cleaners and warm water to remove the dust from the filing. The photos below show the files and the stem as I worked on it.I sanded out the tooth marks and chatter on the stem surface with 220 grit sandpaper and started the polishing with 400 grit wet dry sandpaper.As I sanded the stem I found a tooth mark mid stem on the underside. I filled it in with clear CA glue and when it cured sanded it smooth with 220 and 400 grit sandpaper. Once it was polished it would blend in perfectly.I polished the stem with micromesh sanding pads – wet sanding it 1500-12000 pads. I wiped it down with Obsidian Oil after each pad to protect it and preserve it. I polished it with Before After Pipe Polish – both Fine and Extra Fine. I finished the polishing with a final coat of Obsidian Oil. I am really happy with the way that this GBD French Made Liverpool 9465 turned out. It really is a great looking pipe with character. The Perspex mouthpiece is a unique feature of this pipe and I was able to remove much of the staining on the inside of the airway. The grain really came alive with the buffing. The rich brown stains of the finish gave the grain a sense of depth with the polishing and waxing. The grain really popped. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished GBD Made Liverpool really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ¼ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 33 grams/1.16 oz. The pipe will be going on the rebornpipes store soon. It will be in the section on French Pipe Makers if you would like to add it to your collection.Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!

This Beautiful Shaped Sandblast Rhodo-Horn 66 by W.O. Larsen Really is Stunning

2 Replies

Blog by Steve Laug

Sometimes when you are pipe hunting there is one that just grabs you. That was the case with this interestingly shaped W.O. Larsen Sandblast. It is kind of a cross between a Rhodesian with the twin rings around the rim cap and the flow and shape of a horn. Neither Jeff nor I had seen a Larsen like this one before. We picked it up from an auction early in 2020 in Huntington Station, New York, USA. The pipe was stamped on the around the smooth end of the shank and read W.O. Larsen [over] Made in Denmark followed by Double Black followed by the shape number 66. The pipe itself was in filthy condition. The bowl was thickly caked and there was a thick lava overflow in the sandblasted rim top. The briar was very dirty with grit and grime ground into the surface. The acrylic stem was dirty had deep tooth marks on the top of the stem and chatter on the underside. There was not a logo or mark on the stem. Jeff took photos of the pipe before he did his clean up on it. Jeff took photos of the rim top and the stem to show the condition of the pipe when we received it. You can see the cake in the bowl and the lava in the sandblast on the rim top. It is hard to know the condition of the rim edges with certainty until the pipe is clean. The stem is acrylic and has a lot of chatter and a few deep tooth marks on both sides near the button.He took photos of the sides of the bowl and the heel to give an idea of the shape and the condition of the briar around the bowl. It really is a nicely shaped pipe that has charm and elegance. The next photos Jeff took show the stamping around the smooth briar on the shank end. It is clear and readable as noted above. I refreshed my memory about the pipes coming out of Ole Larsen’s Copenhagen tobacco shop. I knew that many famous Danish Carvers started their careers carving for the shop. I turned first to the Pipephil website to get and over view of the brand (http://www.pipephil.eu/logos/en/logo-l2.html). I did a screen capture of the section on the site showing a summary of the brand and the typical stamping. I then turned to Pipedia to do a bit more reading about the brand and the various lines making it up. Here is the link (https://pipedia.org/wiki/W.%C3%98._Larsen). The link took me to some pages on the finepipes.com website. Here is the link to the summary of the history of the brand. I quote it in full. I have marked the pertinent section with bold font to mark out the section on the SELECT series (https://www.finepipes.com/pipes/danish/w-o-larsen?sort=20a&page=2&zenid=562ff4b9d62f4f612d0f6ee60cab1224).

W.O. Larsen was one of the most famous tobacco shops in Copenhagen, with a beautiful store located on Copenhagen’s famous “Walking Street.” During the flowering of the Danish pipe in the ’60’s, they first began retailing pipes by such carvers as Sixten Ivarsson, Sven Knudsen, Poul Rasmussen, and Brakner. Urged on by his store manager Sven Bang, the owner, Ole Larsen, decided to begin making pipes in the basement of the shop. He first hired Sven Knudsen as the pipe maker, who soon passed the job to his protégé Hans “Former” Nielsen. Larsen’s fortunes rose along with the rest of the Danish pipe business, and Former was soon managing a group of carvers in the old Larsen cigar factory. Among these were Teddy Knudsen, Tonni Nielsen, Jess Chonowitch, Peter Hedegaard and others, who were responsible for the Select and Straight Grain series before they branched out on their own. After Former left to start Bentley pipes in Switzerland, his duties were taken over by Soren Refbjerg Rasmussen, while the straight grains were made by Teddy’s student Benni Jorgenson. As Ole’s health began to fail, the reins were taken over by his son Nils. Nils became convinced that the way for Larsen to prosper was by entering the low-end market, and acquired the Georg Jensen pipe factory to make an array of less expensive pipes. This turned out to be a fatal error, and Larsen was recently sold to Stanwell, who continue to produce so-called “Larsen” pipes in their huge factory. Thus ended an important part of Danish pipe history.

From all of that information I had learned that the pipe was a Danish Made pipe from the Ole Larsen workshop during the 1960s. It was made with a finish they called the Double Black. It is hard to know who actually carved the pipe when you see the list of carvers noted in the above information but it is a well shaped pipe. Now it was time to work on the pipe.

I have to say I was really looking forward to seeing what Jeff had done to this Danish Made W.O. Larsen Double Black pipe when I took it out of the box. It had shown such beauty through the grime so I was quite sure it would be stunning. He reamed the bowl with a PipNet pipe reamer and cleaned the remnants of cake back with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and oils. He cleaned the internals of the shank and stem with pipe cleaners, cotton swabs and alcohol to remove all of the tars and oils there. He scrubbed the exterior of the stem with Soft Scrub. He rinsed off the cleaner with warm water and wiped the bowl and stem down with a light coat of olive oil to rehydrate both. The pipe really was quite stunning. You can see the light burn on the front inner edge of the bowl but it does not lessen the beauty of the pipe. I took close up photos of the stem and the rim top to show both how clean they were and what needed to be addresses with both. The bowl had some burn damage on the front inner edge. The stem looked better but the deep tooth marks and chatter were still present. I would need to remove those to bring the stem back.I removed the stem from the bowl and took a photo of the parts to give a sense of the beauty of the pipe. I decided to work on the damage from the burn on the inner edge of the bowl first. I used a folded piece of 220 grit sandpaper to smooth out the damage and give the edge a light bevel to blend it into the rest of the edge.I worked some Before & After Restoration Balm into the surface of the briar with my finger tips and a horse hair shoe brush to get into the crevices of the sandblast. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. I set the bowl aside and turned my attention to the stem. I filled in the deep tooth marks on the surface of both sides with clear CA glue. Once it cured I flattened the repairs with a small file. I sanded them smooth with 220 grit sandpaper to blend them into the surface of the briar. I started the polishing of the stem with 400 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – wet sanding it 1500-12000 pads. I wiped it down with Obsidian Oil after each pad to protect it and preserve it. I polished it with Before After Pipe Polish – both Fine and Extra Fine. I finished the polishing with a final coat of Obsidian Oil.

I am really happy with the way that this W.O. Larsen Double Black 66 Horn turned out. It really is a beautiful looking pipe with a great shape and sandblast. The acrylic saddle stem is really nice and the brass ring on the tenon end is a great feature. The blast really came alive with the buffing. The rich brown and black stains of the finish gave the pipe a sense of depth with the polishing and waxing. I put the acrylic stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished W.O. Larsen Horn really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 40 grams/1.41 oz. The pipe will be going on the rebornpipes store soon. It will be in the section on Danish Pipe Makers if you would like to add it to your collection.Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!

A Strangely Unique Standing Churchwarden called a Television Pipe

3 Replies

Blog by Steve Laug

The next pipe on the table is an interesting pipe that caught my attention this morning when I was going through the boxes of pipes I have here awaiting restoration. This pipe was purchased from an online auction early in 2020 from St. Albans, West Virginia, USA. It has the length of a churchwarden and is a two part bowl and base with a tall bent stem. The pipe is a standing pipe that is well balanced and still stands when it is put together. The pipe is stamped on the left side of the shank and read TELEVISION PIPE and on the right side it read Algerian Briar [over] Made in France. There is a metal band/ferrule on the shank that is stamped EP in a diamond which means Electroplated and below that it has some very worn hallmarks. It was extremely dirty with grime and grit ground into the bowl sides. The bowl was heavily caked and there was a thick lava coat on the rim top and edges. The bowl unscrewed from the base which was also thickly caked with tars and oils. The band/ferrule was oxidized as was the vulcanite stem. There were light tooth marks on both sides of the stem ahead of the button. There was a small aluminum stinger in the tenon that was removable. Jeff took photos of the pipe before he started his work on it.He took some photos of the bowl and rim top to show their condition. The cake is thick and there is debris on the walls of the bowl. The rim top has a thick coat of lava and between that and the cake it is hard to know the condition of the rim edges. Clean up will reveal the condition. There are chips and nicks in the outer edge of the bowl. The stem looks pretty good with light tooth marks on both sides. The stem is oxidized and calcified. He took photos of the bowl and base together to show the overall appearance of the pipe. There is a lot of grime around the junction of the bowl and base that can be seen in the photos below. He unscrewed the bowl from the base and took a series of photos to show the condition of the bowl and the base. You can see the thick oils and tars in the threads, on the bottom of the bowl and in the base of the pipe. It is really a mess and will be a major work to clean up. Jeff took photos of the stamping on the sides of the shank and on the electro-plated band/ferrule on the shank.He remove the stem from the base and took a photo of the tenon end and shank to see the built up tars on the tenon and in the inside of the shank. You can also see the tarnish on the band.I looked on both Pipephil’s site and Pipedia to see what I could find out about the brand. There was nothing listed on either site regarding that brand. I turned a site that has been helpful in identifying pipes called Smoking Metal (http://www.smokingmetal.co.uk/pipe.php?page=277). The site shows a short version of this pipe – with a P-lip style stem on the shank rather than a Churchwarden stem. Other than the stem it is the same pipe. Since the information was quite limited on the brand it was time to turn to work on the pipe itself. I have to say that this was another pipe that I was really looking forward to seeing what Jeff had done to it. It is a French Made Algerian Briar Television Pipe that had shown such beauty through the grime that I was quite sure it would be stunning he cleaned it. He reamed the bowl with a PipNet pipe reamer and cleaned the remnants of cake back with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl and base with Murphy’s Oil Soap and a tooth brush to remove the grime and oils. He cleaned the internals of the base, shank and stem with pipe cleaners, cotton swabs and alcohol to remove all of the tars and oils there. He scrubbed the exterior of the stem with Soft Scrub to remove the oxidation and calcification. He wiped the bowl and stem down with a light coat of olive oil to rehydrate both. The pipe really was quite stunning. You can see the nicks around the bowl and base but they do not lessen the beauty of the pipe. I took close up photos of the stem and the rim top to show both how clean they were and what needed to be addresses with both. The rim top had some nicks in the top and the inner edge of the bowl was out of round. The stem looked better but the light tooth marks and chatter were still present.I took photos of the cleaned up stamping on sides of the shank. It is very clear and readable.I removed the stem from the shank and took photos to show the overall look of this beautiful pipe. I then unscrewed the bowl from the base and took photos of all of the parts of the pipe. I started my work on this pipe by dealing with the shrunken fills on the bowl sides. I filled them in with clear CA glue and briar dust. Once the repairs cured I sanded them smooth to blend them into the surrounding briar. I polished the briar with micromesh sanding pads – wet sanding with 1500-4000 grit pads. I wiped the briar down after each pad. The grain began to really come alive through the polishing. I took a break from the polishing process and I stained the sanded areas of the bowl with a Walnut Stain pen to blend them into the surrounding briar.I buffed bowl with Blue Diamond polish and then went back to polishing the bowl with 6000-12000 grit micromesh sanding pads. I repeated the process of polish the base with micromesh sanding pads – wet sanding with 1500-12000 grit pads. I wiped the briar down after each pad. The grain began to really come alive through the polishing. I worked some Before & After Restoration Balm into the surface of the briar of both the bowl and the base with my finger tips. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. I put the bowl and base back together again and rubbed them down with the Balm. I buffed the bowl and base with Blue Diamond on the wheel. The finished bowl looked a lot better. I set the bowl aside and turned my attention to the stem. I polished the stem with micromesh sanding pads – wet sanding it 1500-12000 pads. I wiped it down with Obsidian Oil after each pad to protect it and preserve it. I polished it with Before After Pipe Polish – both Fine and Extra Fine. I finished the polishing with a final coat of Obsidian Oil. I am really happy with the way that this Tall Television Pipe Churchwarden Sitter turned out. It really is a unique looking pipe with character. The long mouthpiece is a unique feature of this pipe and sets it apart. The removable bowl and base work well and the pipe is a beauty. To me it is a great pipe with unique details. The grain really came alive with the buffing. The rich brown and black stains of the finish gave the grain a sense of depth with the polishing and waxing. The grain really popped. I put the vulcanite stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Television Pipe Sitter really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 10 inches, Height: 3 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 57 grams/2.01 oz. The pipe will be going on the rebornpipes store soon. It will be in the section on French Pipe Makers if you would like to add it to your collection.Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!

I do not understand why Peterson coats some of their pipes with a thick varnish coat

2 Replies

Blog by Steve Laug

Yesterday afternoon Dallas (a long time pipe friend) stopped by to pick up a pipe I had repaired for him and to sit on the front porch and enjoy a bowl and some fellowship with each other. Due to COVID-19 we have only had virtual visits for over a year now so it was really good to see him and posit our solutions to the world’s problems. We covered a lot of topics that come naturally to men of a certain age! In the course of our discussion he brought out a very shiny Peterson’s Kinsale XL25 Made in the Republic of Ireland. The pipe was very glossy and it was one that he had in his collection for a long time. It should have been showing wear on the finish but this “plastic” coated looking finish was impervious to time and use it appeared. There was a slight bit of peeling on the rim top but other than that it looked like new. He handed it to me and told me his woes with this pipe. He said that the pipe became extremely hot when he smoked it. He had tried everything to change that but nothing mattered. Dallas has been smoking a pipe for almost 60 years now so it is not a technique issue. I am certain it is the fault of the thick “plastic” looking finish on the pipe. I have stripped other Peterson’s that had the same issue for him and the work always improves the dispersal of the heat. He wanted me to do the same with this pipe. I took a close up photo of the rim top to show the thickness of the cake and the peeling varnish on the rim top. The edges look very good and other than the bubbles in the varnish coat the top looks good. The stem is also shown to show the light oxidation of time on the vulcanite and the tooth marks and chatter that come from use.I took photos of the stamping on the shank to show the brand and the age of the pipe. It reads Peterson’s Kinsale on the top of the shank and Made in the Republic of Ireland on the underside. On the right side of the shank was the shape number XL25. The varnish had filled in the numbers showing that it had been varnished after stamping.I removed the stem from the shank and took a photo of the left side of the bowl to try to capture the shape and the grain. It really is a beauty.I like working on clean pipes so I reamed the bowl with a PipNet pipe reamer to take the cake back to bare briar. I cleaned up the reaming with a Savinelli Fitsall Pipe Knife. I sanded the bowl with 220 grit sandpaper wrapped around a piece of dowel. Once finished the bowl was clean and smooth. Now it was time to tackle the obnoxious varnish coat. I tried to remove it with straight acetone and came up with nothing. The seal on the finish was solid and seemingly impervious to my work at this point. I lightly sanded the finish on the bowl with a folded piece of 220 sandpaper to break through the surface. Once I had done that the acetone worked well to remove the finish from the briar. I repeated the process until the shiny coat was gone and I could feel the briar in my hand and see the grain without the top coat over it. I polished the briar with micromesh sanding pads – wet sanding with 1500-12000 grit pads. I wiped the briar down after each pad. The grain began to really come alive through the polishing. I worked some Before & After Restoration Balm into the surface of the briar with my finger tips. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. There is a rich shine in the briar but it is not that previous plastic-like shine. I cleaned the shank, mortise and airway in the stem with pipe cleaners, cotton swabs and isopropyl alcohol to remove the tars. Dallas had mentioned the stem was very tight but once I cleaned it the fit was just the way it should have been.I started polishing the stem with 1500-2400 micromesh sanding pads. I wiped it down after each pad with Obsidian Oil. I paused my polishing to touch up the P stamp on the top of the saddle with some Rub’n Buff Antique Gold. I worked it into the stamp with a tooth pick and buffed it off with a soft towel. I went back to the micromesh and polished the stem with 3200-12000 grit pads, again wiping it down after each pad with Obsidian Oil. I finished the polishing with Before & After Pipe Stem Polish, both Fine and Extra Fine. I gave it a final coat of Obsidian Oil before putting it back on the shank. Once the varnish was stripped off this is a nice looking Peterson’s Kinsale XL25 Pipe with an oval shank and a vulcanite saddle stem is a great looking pipe now that it has been restored. The briar is clean and the grain really came alive. The rich brown and black stains gave the grain a sense of depth with the polishing and waxing. The grain really popped. I put the vulcanite stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Peterson’s Kinsale XL25 really is a beauty and feels great in the hand and looks very good. I think that Dallas will be very happy with it once he picks it up. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 2 ¼ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 65 grams/2.29 oz. The pipe looks very good and I look forward to what Dallas thinks of it. Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!

I don’t like Painted Pipes – This Jeantet Meerlined Brummer 944 Billiard gives me pause

1 Reply

Blog by Steve Laug

This white Billiard with a Tortoise Shell acrylic stem came to us from an online auction early in 2020 from Columbus, Michigan, US. From the title of the blog you know that I am not a fan of painted pipes. That is probably because I have come to understand that the briar under the paint is quite often horrible and filled with putty and flaws. Paint covers a multitude of “sins” and I am sure this is no exception. Added to that the pipe is also meerschaum lined. What made me pause was the great looking tortoise shell stem and the gold shank band that give the pipe a touch of class. The painted surface was in good condition with no nicks of scrapes. The rim top had a bit of darkening on the meer lining and a little on the paint but even that was not too bad. The bowl did not have a cake which was also a bonus that helped. It is stamped on the left side of the shank and reads Jeantet [over] Brummer and has the shape number 944 stamped on the underside of the shank. The stem has the Jeantet logo on the left side – a J in an oval. On the right side it is stamped Hand Cut and on the underside it is stamped FRANCE. The Tortoise Shell stem is quite pretty but upon examination there is a round bite through on the top side just ahead of the button. Jeff and I had picked up several pipes that the previous owner had customized by filling in the slot with putty and drilling a hole in the top. It was obviously the owner’s attempt at making a “P-lip” style smoker. We are pretty sure this was one of them. In any case it would need to be reworked – opening the slot and filling in the hole on the top side. Jeff took some photos of the pipe before he worked on it. Jeff took photos of the bowl and rim top to show the meer lining and the condition of the rim and bowl. It has some darkening and light lava on the back side but otherwise looked good. He also took photos of the stem to show the hole in the top side. You cannot see it but there is a plug in the slot on the stem end that will need to be removed. Other than that the stem was in excellent condition.Jeff removed the stem from the shank to show the stepped down Delrin tenon and the gold band on the shank end. It is a pretty looking pipe and the shank is surprisingly clean looking.He took photos of the bowl and heel to show the condition of the painted surface. It is quite remarkable that it is in such great condition and appears to have been very well cared for by the previous pipeman or woman. Jeff took photos of the stamping on the shank and the logo on the stem. They read as noted above and were in excellent condition. I turned to Pipephil’s site to see what I could learn about the Brummer line of Jeantet pipes (http://pipephil.eu/logos/en/logo-jeantet.html). There was nothing specific about that line though was a brief summary of the history. I quote from the top bar below:

The company joined the Cuty-Fort Entreprises group (Chacom, Ropp, Vuillard, Jean Lacroix…) in 1992. In 2010 it dropped out and the brand isn’t part of the group any more. The label is owned by the Jeantet family (Dominique Jeantet) again. The pipe production is discontinued. Dominique Jeantet retired in 2000. See also: Antidote, Duke of Kent, Grand Duke, Hermes, Sir Bruce, Sir Duke

I turned to Pipedia to get a more detailed history of the brand (https://pipedia.org/wiki/Jeantet). There as a brief history there that I have reproduced below.

The firm of the Jeantet family in Saint-Claude is first mentioned as early as 1775. By 1807 the Jeantets operated a turnery producing in particular wooden shanks for porcelain pipes and wild cherry wood pipes. The firm was named Jeantet-David in 1816, and in 1837 the enterprise was transformed into a corporation as collective name for numerous workshops scattered all over the city.

The manufacturing of briar pipes and began in 1858. 51 persons were employed by 1890. Desirous to concentrate the workers at a single site, the corporation began to construct a factory edifying integrated buildings about 1891 at Rue de Bonneville 12 – 14. This took several years. In 1898 Maurice Jeantet restructured the business. He is also presumed to enlarge Jeantet factory purchasing a workshop adjoining southerly. It belonged to the family Genoud, who were specialized in rough shaping of stummels and polishing finished pipes. (In these times it was a most common procedure to carry goods from here to there and back again often for certain steps of the production executed by dependent family based subcontractors. Manpower was cheap.)

Jeantet was transformed to a corporation with limited liability in 1938. By that time a branch workshop was operated in Montréal-la-Cluse (Ain), where mainly the less expensive pipes were finished. 107 employees – 26 of them working from their homes – were counted in Saint-Claude in 1948 and 18 in the Ain facility.

The Saint-Claude factory was considerably modernized by ca. 1950 installing (e.g.) freight elevators. In 1952 the southern workshop was elevated. 80 workers were employed in 1958. The factory covered an area of 2831 m²; 1447 m² of the surface were buildings.

The climax of the pipe production was reached around 1969, when thirty to thirty five thousand dozens of pipes were made by 72 workers (1969). But then the production continuously dwindled to only six or seven thousand dozens in 1987 and only 22 workers were still there. Even though, around 1979 a very modern steam powered facility for drying the briar had been installed in the factory’s roofed yard.

Yves Grenard, formerly Jeantet’s chief designer and a great cousin of Pierre Comoy, had taken over the management of Chapuis-Comoy in 1971. Now, to preserve the brand, the Jeantet family went into negotiations with him, and resulting from that Jeantet was merged in the Cuty Fort Group (est. 1987 and headed by Chacom) in 1988 along with the pipe brands of John Lacroix and Emile Vuillard. Chacom closed the Jeantet plant, and the City of Saint-Claude purchased it in 1989. After alternative plans failed, the buildings were devoted to wrecking. The southerly workshop was wrecked before 1992.

Today Jeantet pipes were produced as a sub-brand by Chapuis-Comoy who’s mainstay is Chacom of course.

Jeff carefully cleaned up this Jeantet Brummer Painted Billiard with a Tortoise Shell stem with Murphy’s Oil Soap and a tooth brush to remove the grime on the rim top and bowl sides. He cleaned up the inside of the bowl with a Savinelli Fitsall Pipe Knife, scraping away the light cake on the bowl walls. He scrubbed the internals of the shank and stem with pipe cleaners, cotton swabs and alcohol until the airways were clean and the pipe smelled fresh. The pipe looked much better once the bowl and stem were clean. The plug in the slot of the stem was removed and the hole in the top was cleaned up as well. It was ready to repair when it arrived in Vancouver. I took photos of the pipe before I started my work on it. I took close up photos of the meer lined bowl and the rim top to show the condition. I also took photos of both sides of the stem to give a sense of the damage to the top side and the good condition of the underside.I took photos of the stamping on the left side of the shank and stem and the right side of the stem. It reads as noted above and is very clear and readable.I took the stem off the shank and took photos of the pipe to give a sense of its beauty and proportions.The bowl of the pipe was in excellent condition and did not need any work. The only major issue on the pipe was the hole in the top of the stem. I greased a pipe cleaner with Vaseline and slid it into the slot under the hole in the stem top. I filled in the hole with clear super glue. Once the glue cured it was a white spot that needed more work to blend into the stem surface. Once the repair cured I sanded the repair with 220 grit and polished it with 400 grit wet dry sandpaper. I polished out the tooth chatter on the underside of the stem with the same sandpaper and started polishing it.I used a dark brown and black stain pen to approximate the feathery wisps of the tortoise shell finish of the acrylic. I gave the repair a top coat of clear CA glue and let it cure. I sanded the spot smooth.I polished the stem surface with micromesh sanding pads. I wet sanded it with 1500-12000 grit sanding pads. I wiped the stem down after each pad with Obsidian Oil. I polished it with Before & After Stem Polish both Fine and Extra Fine polish. I gave it a final rub down with Obsidian Oil. I lightly buffed the bowl and stem with Blue Diamond on the buffing wheel and gave it a coat of Conservator’s Wax to seal and protect it. The pipe took on a deep shine in the painted briar and in the tortoise shell acrylic stem. The twin ring gold band also looked very good. It was an interesting looking pipe. The dimensions of the pipe are Length: 6 inches, Height: 2 inches, Outer Diameter of the bowl: 1 ¼ inches, Diameter of the chamber: ¾ of an inch. The weight of the pipe is 60 grams/2.12 oz. The photos below show the finished pipe. It is a surprisingly nice looking pipe. If you would like to add it to your collection I will be adding it to the French Pipe Makers section of the rebornpipes store. Send me a message or an email. Thanks for reading the blog. It was an interesting restoration.

What a Beautifully Grained Proctus Deluxe Old Briar 71 Bent Egg/Brandy

This restoration is a bit of a resurrection of a beautiful Ferndown Root 3* Dublin

3 Replies

Blog by Steve Laug

This pipe was one of those happy coincidences. I have been looking for a Les Wood Hand Made Ferndown pipe for quite a while now to add to my collection. I have read a lot about them and had them on the wish list but have never found one. The crazy thing was that I was looking on Maxim Engels Site here in Canada and on EBay when I received an email from David asking if I would be willing to breath life back into this badly damaged beauty. That should have been an easy answer but I have been turning down work as my “day” job has dramatically become more consuming and I am left without a lot of time to work on pipes. I have been turning down pipes for repair for awhile now not wanting to add to the load. I postponed answering him and when I finally did I asked him to send me photos of the pipe so I would know what I was getting into. He immediately forwarded me the next two photos and I was hooked! I have not worked on a Ferndown before and this one looked like a good candidate for me to work on. I wrote and asked him about his timeline and he was very gracious with me. We struck a deal and the pipe was on its way to Canada for work. It dawned on me then that I had no idea what the rest of the pipe looked like and I would just have to wait and be surprised.I came home from my office yesterday to find the box from David waiting for me. My wife Irene had put it where I would see it. I took it to my work desk in the basement and carefully opened a well packed box that had originally contained pipes that I had sent to David. It was good to see this little box continue to serve its purpose as the vessel that protects it precious cargo. I took it out of the box and took some photos of it to chronicle the issues that I saw and give a benchmark for me before I began the work.

The pipe is a beautifully shape Dublin with a gold band. The pipe is stamped on the underside of the bowl and shank. On the heel of the bowl it is stamped Ferndown [arched over] Root [over] ***. Next to that it is stamped Hand Made In [over] England [over] Les Wood. On the gold band it is stamped L&JS in a rectangle [over] 9CT. The finish is quite beautiful but dirty on the bowl sides and shank. The largest issue with the pipe is the rim top and edges. There are burn marks around the front and back outer edges. The rim top itself is covered with lava but not enough to hide the charred inner edge and top. The damage is deep from the looks of the bowl top but cleaning would tell the story. The bowl itself is out of round from the damage. There was a thick cake in the bowl and the pipe stank of old tobacco but not enough to distinguish what it was… I know it was not an aromatic from the smell but otherwise I could not identify it. The taper stem is oxidized and has some calcification on the end. It is stamped on the left side and reads LJS. It was originally a stunning pipe and even with the damage and grime it still had class that was evident the moment you looked at it. I took a photo of the rim top and edges to show the burn damage around the bowl top and inner and outer edges. It has some serious char under the lava coat. The bowl is thickly caked as you can see from the photo. I also took photos of the stem to show its condition. There are light tooth marks and chatter on both sides next to the button and there is a deep oxidation in the vulcanite.I took a photo of the stamping on the heel of the bowl and underside of the shank and gold band. It is clear and readable as noted above.I removed the stem from the bowl and took a photo of the pipe to show the proportions of the design. It is really a well made pipe.I turned to Pipephil to help me interpret the stamping on the pipe and gain some background information (http://pipephil.eu/logos/en/logo-f1.html). The photo to the left shows Les Wood and the information below came from the side bar. I have also done a screen capture of the information on the site.

Artisan: Leslie (Les) Wood. He was the master silver smith at Alfred Dunhill Ltd. before starting L. & J.S. Briars. Pipes for the European market are stamped “L. Wood” while those for US are stamped “Ferndown”. Production: ~ 2000 pipes/year (Ferndown + L.Wood) See also Elwood.From the information on Pipephil I learned that I was working on a pipe made for the US and that it was a large 3 star pipe in terms of size. I also learned that the Root finish was a smooth light brown. All of which helped to understand the pipe in hand.

I turned to Pipedia (https://pipedia.org/wiki/Ferndown) to find a more detailed history and description of the brand and was amazed to find that the majority of it was either quotes or written by Les Wood himself. I am quoting some pertinent parts of the article below. You can turn to the site to read it in full.

Leslie “Les” John Wood worked for Dunhill for 19 years. His last position was as master silversmith. Following his tenure with Dunhill, Les formed his own brand, L. & J.S. Briars together with his wife Dolly in 1978. Les Wood follows Sasieni, the first ex Dunhill worker to start their own enterprise, and he was followed by William John “Ashton”-Taylor.

“I started working at Dunhill’s in March 1963, in the silver mounting department working under Jack Spriggs he left the firm after I had been there for 2 years, and I took over the department, at that time I worked alone it was only when the department was relocated to the top floor that the increase of pipes that needed mounting that we took on trainees. After 19 years I was asked if I would buy the machinery and move out of the factory and set up on my own, so off I went. With me I took the staff that worked with me at that time, Robert Morris was the best, he could mount anything, he now has his own jewellery retail shop and makes some really nice handmade jewellery from his shop at Whitstable in Kent.”

“I worked on Dunhill’s pipes from 1980/81 and soon built up a reputation as the firm to send your mounting to. As time went on and Dolly left Dunhill’s we decided to start to turn our own bowls and make our own pipes under the name of my house.” Les Wood. Jan, 2020…”

Due to the vagaries of international trademark law, he sold his earlier pipes as ” L.&J.S Briars”, “Ellwood”, “Les Wood” or “L. Wood”. Until recently, an average of 1500 – 2000 pipes a year were sold as “Ferndown” — named for the mansion he lives in — in the UK and US, but as “L. Wood” pipes in Germany…

To many pipe smokers, Les Wood’s pipes embody the revival of great English pipe making initiated by Ashton in the early 1980s. The high-grade Italian and Spanish plateau he prefers is oil-cured in the tradition of both Dunhill and Ashton. The pipes are renowned for their pleasant, slightly nutty flavor and remarkable smoking characteristics. They feature impeccable craftsmanship extending to very good stem/bit work, though many pipes are often a bit heavier. The hallmark of his work, of course, is the excellent silver work. Almost all of his pipes feature rings or ferules for spigot stems. Grading is by finish: “Bark” (ca. 90%, rusticated, dark brown and black), “Antique Bark” (tan rusticated), “Reo” (brown and red, smooth), “Root” (orange, smooth), and “Tudor Root” (orange and brown smooth) and by size (one to four stars). He also designates straight grains with SG…

“We bought the briar from Italy and Spain, one is mush denser that the other I like the Spanish briar it is lighter and Dolly would make the Roots look like glass with only a natural vanish, all the pipes were finished with the same varnish, the bark finish on the bowl is put on by Dolly by hand, one slip and you have a problem. That’s one job that needs to be seen to see how it’s done.”

There also was a great paragraph on the oil curing process that Les and Dolly developed. I am including that below as the pipe I am working on was definitely oil cured.

“We had our method of Oil-Curing. We applied Oil to the outside and the inside of the bowl, that was because when Dolly was at Dunhill’s factory, she worked in the finishing department and got such a high finish on the pipes they wanted to know how she did it. The bowls had already gone through Dunhills’ oven oil curing system, but to her, it was not enough, because it could not get the shine that she wanted, then, she oiled the bowl on the outside and the inside to get a better finished. She left Dunhill and came to work with me. Because of this process, we found out the smokers liked the taste when light up their pipe – they said there was no aftertaste and it had a sweet taste doesn’t matter what tobacco they used. We have carried it on from there.”

With that background information it was now time to work on the pipe itself. I decided to top the bowl to remove the heavy charring damage. I put a piece of 180 grit sandpaper on the topping board and worked the rim top and edges over in a circular motion on the board. After a few passes I took a photo of the rim top to show the progress but also to show the burn damage.Before working on the rim edges I reamed the bowl with a PipNet Reamer to cut back the cake to bare wood. I cleaned up the remaining cake with a Savinelli Fitsall Pipe Knife. I then sanded the bowl with a piece of 220 sandpaper wrapped around a piece of dowel to smooth out the bowl walls. The reaming and sanding cleaned up a lot of the damage on the inner edge as you can see in the fourth photo below.With that done I turned my attention to the inner and outer edges of the rim. I cleaned up both with a folded piece of 220 grit sandpaper. I worked on removing the burn marks on the outer edge and gave the inner edge a light bevel to hide the burn marks.I scrubbed the exterior of the bowl and shank with undiluted Murphy’s Oil Soap and a tooth brush. I work on the grime ground into the briar. I rinsed the bowl with warm running water to remove the debris left behind from the scrubbing. The pipe looked much better and the rim top was greatly improved. I cleaned the internals of the bowl, shank and airway in the stem with isopropyl alcohol, cotton swabs and pipe cleaners until they came out clean.I set the stem aside and turned my attention to polishing the briar. I used 1500-12000 grit micromesh sanding pads and wiped the bowl down after each pad with a damp cloth. The briar on the rim began to change the colour to get much closer to the rest of the bowl. I used a Maple stain pen to blend the rim top into the colour of the rest of the bowl. It matched well and served to obscure the burn mark on the rim edges. I also restained a light spot on the heel of the bowl. I rubbed the bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the bowl sides and shank with my fingertips to clean, enliven and protect the briar. I let the balm sit for a little while and then buffed with a cotton cloth to raise the shine. The Balm did its magic and the grain stood out. I set the bowl aside and put the stem to soak in a bath of Briarville’s Pipe Stem Deoxidizer overnight. In the morning I rinsed it off with warm water and rubbed off the remaining softened oxidation until the stem was very clean. It looked very good and even the LJS gold stamping looked good. I set the bowl aside and turned my attention to the stem. I “painted” the tooth marks on the stem with the flame of a lighter to raise them. I sanded the remaining tooth chatter and marks with 220 grit sandpaper to blend them into the stem surface. I started the polishing process with 400 grit wet dry sandpaper. I polished the vulcanite stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. The photo below shows the polished stem. I touched up the LJS stamp on the left side of the taper stem with Rub’n Buff Antique Gold. I rubbed it on and worked it into the stamp with a tooth pick. I buffed it off with a soft cloth. This nice looking Les Wood Ferndown Root 3 Dublin with a taper vulcanite stem is a great looking pipe now that it has been restored. The briar is clean and the grain really came alive. The rich brown stains gave the finish a sense of depth with the polishing and waxing. The grain really popped. I put the stem back on the bowl and buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Ferndown Root 3 Dublin really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ¾ inches, Chamber diameter: 7/8 of an inch. The weight of the pipe is 66 grams/2.36 oz. The pipe will be going back David very soon. I am looking forward to what he thinks once he has it back in his hands. Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on.