Tag Archives: Stem repairs

This Beautiful Shaped Sandblast Rhodo-Horn 66 by W.O. Larsen Really is Stunning

2 Replies

Blog by Steve Laug

Sometimes when you are pipe hunting there is one that just grabs you. That was the case with this interestingly shaped W.O. Larsen Sandblast. It is kind of a cross between a Rhodesian with the twin rings around the rim cap and the flow and shape of a horn. Neither Jeff nor I had seen a Larsen like this one before. We picked it up from an auction early in 2020 in Huntington Station, New York, USA. The pipe was stamped on the around the smooth end of the shank and read W.O. Larsen [over] Made in Denmark followed by Double Black followed by the shape number 66. The pipe itself was in filthy condition. The bowl was thickly caked and there was a thick lava overflow in the sandblasted rim top. The briar was very dirty with grit and grime ground into the surface. The acrylic stem was dirty had deep tooth marks on the top of the stem and chatter on the underside. There was not a logo or mark on the stem. Jeff took photos of the pipe before he did his clean up on it. Jeff took photos of the rim top and the stem to show the condition of the pipe when we received it. You can see the cake in the bowl and the lava in the sandblast on the rim top. It is hard to know the condition of the rim edges with certainty until the pipe is clean. The stem is acrylic and has a lot of chatter and a few deep tooth marks on both sides near the button.He took photos of the sides of the bowl and the heel to give an idea of the shape and the condition of the briar around the bowl. It really is a nicely shaped pipe that has charm and elegance. The next photos Jeff took show the stamping around the smooth briar on the shank end. It is clear and readable as noted above. I refreshed my memory about the pipes coming out of Ole Larsen’s Copenhagen tobacco shop. I knew that many famous Danish Carvers started their careers carving for the shop. I turned first to the Pipephil website to get and over view of the brand (http://www.pipephil.eu/logos/en/logo-l2.html). I did a screen capture of the section on the site showing a summary of the brand and the typical stamping. I then turned to Pipedia to do a bit more reading about the brand and the various lines making it up. Here is the link (https://pipedia.org/wiki/W.%C3%98._Larsen). The link took me to some pages on the finepipes.com website. Here is the link to the summary of the history of the brand. I quote it in full. I have marked the pertinent section with bold font to mark out the section on the SELECT series (https://www.finepipes.com/pipes/danish/w-o-larsen?sort=20a&page=2&zenid=562ff4b9d62f4f612d0f6ee60cab1224).

W.O. Larsen was one of the most famous tobacco shops in Copenhagen, with a beautiful store located on Copenhagen’s famous “Walking Street.” During the flowering of the Danish pipe in the ’60’s, they first began retailing pipes by such carvers as Sixten Ivarsson, Sven Knudsen, Poul Rasmussen, and Brakner. Urged on by his store manager Sven Bang, the owner, Ole Larsen, decided to begin making pipes in the basement of the shop. He first hired Sven Knudsen as the pipe maker, who soon passed the job to his protégé Hans “Former” Nielsen. Larsen’s fortunes rose along with the rest of the Danish pipe business, and Former was soon managing a group of carvers in the old Larsen cigar factory. Among these were Teddy Knudsen, Tonni Nielsen, Jess Chonowitch, Peter Hedegaard and others, who were responsible for the Select and Straight Grain series before they branched out on their own. After Former left to start Bentley pipes in Switzerland, his duties were taken over by Soren Refbjerg Rasmussen, while the straight grains were made by Teddy’s student Benni Jorgenson. As Ole’s health began to fail, the reins were taken over by his son Nils. Nils became convinced that the way for Larsen to prosper was by entering the low-end market, and acquired the Georg Jensen pipe factory to make an array of less expensive pipes. This turned out to be a fatal error, and Larsen was recently sold to Stanwell, who continue to produce so-called “Larsen” pipes in their huge factory. Thus ended an important part of Danish pipe history.

From all of that information I had learned that the pipe was a Danish Made pipe from the Ole Larsen workshop during the 1960s. It was made with a finish they called the Double Black. It is hard to know who actually carved the pipe when you see the list of carvers noted in the above information but it is a well shaped pipe. Now it was time to work on the pipe.

I have to say I was really looking forward to seeing what Jeff had done to this Danish Made W.O. Larsen Double Black pipe when I took it out of the box. It had shown such beauty through the grime so I was quite sure it would be stunning. He reamed the bowl with a PipNet pipe reamer and cleaned the remnants of cake back with a Savinelli Fitsall Pipe Knife.  He scrubbed the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and oils. He cleaned the internals of the shank and stem with pipe cleaners, cotton swabs and alcohol to remove all of the tars and oils there. He scrubbed the exterior of the stem with Soft Scrub. He rinsed off the cleaner with warm water and wiped the bowl and stem down with a light coat of olive oil to rehydrate both. The pipe really was quite stunning. You can see the light burn on the front inner edge of the bowl but it does not lessen the beauty of the pipe. I took close up photos of the stem and the rim top to show both how clean they were and what needed to be addresses with both. The bowl had some burn damage on the front inner edge. The stem looked better but the deep tooth marks and chatter were still present. I would need to remove those to bring the stem back.I removed the stem from the bowl and took a photo of the parts to give a sense of the beauty of the pipe. I decided to work on the damage from the burn on the inner edge of the bowl first. I used a folded piece of 220 grit sandpaper to smooth out the damage and give the edge a light bevel to blend it into the rest of the edge.I worked some Before & After Restoration Balm into the surface of the briar with my finger tips and a horse hair shoe brush to get into the crevices of the sandblast. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. I set the bowl aside and turned my attention to the stem. I filled in the deep tooth marks on the surface of both sides with clear CA glue. Once it cured I flattened the repairs with a small file. I sanded them smooth with 220 grit sandpaper to blend them into the surface of the briar. I started the polishing of the stem with 400 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – wet sanding it 1500-12000 pads. I wiped it down with Obsidian Oil after each pad to protect it and preserve it. I polished it with Before After Pipe Polish – both Fine and Extra Fine. I finished the polishing with a final coat of Obsidian Oil.

I am really happy with the way that this W.O. Larsen Double Black 66 Horn turned out. It really is a beautiful looking pipe with a great shape and sandblast. The acrylic saddle stem is really nice and the brass ring on the tenon end is a great feature. The blast really came alive with the buffing. The rich brown and black stains of the finish gave the pipe a sense of depth with the polishing and waxing. I put the acrylic stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished W.O. Larsen Horn really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 40 grams/1.41 oz. The pipe will be going on the rebornpipes store soon. It will be in the section on Danish Pipe Makers if you would like to add it to your collection.Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!

A Strangely Unique Standing Churchwarden called a Television Pipe

3 Replies

Blog by Steve Laug

The next pipe on the table is an interesting pipe that caught my attention this morning when I was going through the boxes of pipes I have here awaiting restoration. This pipe was purchased from an online auction early in 2020 from St. Albans, West Virginia, USA. It has the length of a churchwarden and is a two part bowl and base with a tall bent stem. The pipe is a standing pipe that is well balanced and still stands when it is put together. The pipe is stamped on the left side of the shank and read TELEVISION PIPE and on the right side it read Algerian Briar [over] Made in France. There is a metal band/ferrule on the shank that is stamped EP in a diamond which means Electroplated and below that it has some very worn hallmarks. It was extremely dirty with grime and grit ground into the bowl sides. The bowl was heavily caked and there was a thick lava coat on the rim top and edges. The bowl unscrewed from the base which was also thickly caked with tars and oils. The band/ferrule was oxidized as was the vulcanite stem. There were light tooth marks on both sides of the stem ahead of the button. There was a small aluminum stinger in the tenon that was removable. Jeff took photos of the pipe before he started his work on it.He took some photos of the bowl and rim top to show their condition. The cake is thick and there is debris on the walls of the bowl. The rim top has a thick coat of lava and between that and the cake it is hard to know the condition of the rim edges. Clean up will reveal the condition. There are chips and nicks in the outer edge of the bowl. The stem looks pretty good with light tooth marks on both sides. The stem is oxidized and calcified. He took photos of the bowl and base together to show the overall appearance of the pipe. There is a lot of grime around the junction of the bowl and base that can be seen in the photos below. He unscrewed the bowl from the base and took a series of photos to show the condition of the bowl and the base. You can see the thick oils and tars in the threads, on the bottom of the bowl and in the base of the pipe. It is really a mess and will be a major work to clean up. Jeff took photos of the stamping on the sides of the shank and on the electro-plated band/ferrule on the shank.He remove the stem from the base and took a photo of the tenon end and shank to see the built up tars on the tenon and in the inside of the shank. You can also see the tarnish on the band.I looked on both Pipephil’s site and Pipedia to see what I could find out about the brand. There was nothing listed on either site regarding that brand. I turned a site that has been helpful in identifying pipes called Smoking Metal (http://www.smokingmetal.co.uk/pipe.php?page=277). The site shows a short version of this pipe – with a P-lip style stem on the shank rather than a Churchwarden stem. Other than the stem it is the same pipe. Since the information was quite limited on the brand it was time to turn to work on the pipe itself. I have to say that this was another pipe that I was really looking forward to seeing what Jeff had done to it. It is a French Made Algerian Briar Television Pipe that had shown such beauty through the grime that I was quite sure it would be stunning he cleaned it. He reamed the bowl with a PipNet pipe reamer and cleaned the remnants of cake back with a Savinelli Fitsall Pipe Knife.  He scrubbed the bowl and base with Murphy’s Oil Soap and a tooth brush to remove the grime and oils. He cleaned the internals of the base, shank and stem with pipe cleaners, cotton swabs and alcohol to remove all of the tars and oils there. He scrubbed the exterior of the stem with Soft Scrub to remove the oxidation and calcification. He wiped the bowl and stem down with a light coat of olive oil to rehydrate both. The pipe really was quite stunning. You can see the nicks around the bowl and base but they do not lessen the beauty of the pipe.  I took close up photos of the stem and the rim top to show both how clean they were and what needed to be addresses with both. The rim top had some nicks in the top and the inner edge of the bowl was out of round. The stem looked better but the light tooth marks and chatter were still present.I took photos of the cleaned up stamping on sides of the shank. It is very clear and readable.I removed the stem from the shank and took photos to show the overall look of this beautiful pipe. I then unscrewed the bowl from the base and took photos of all of the parts of the pipe. I started my work on this pipe by dealing with the shrunken fills on the bowl sides. I filled them in with clear CA glue and briar dust. Once the repairs cured I sanded them smooth to blend them into the surrounding briar. I polished the briar with micromesh sanding pads – wet sanding with 1500-4000 grit pads. I wiped the briar down after each pad. The grain began to really come alive through the polishing. I took a  break from the polishing process and I stained the sanded areas of the bowl with a Walnut Stain pen to blend them into the surrounding briar.I buffed bowl with Blue Diamond polish and then went back to polishing the bowl with 6000-12000 grit micromesh sanding pads. I repeated the process of polish the base with micromesh sanding pads – wet sanding with 1500-12000 grit pads. I wiped the briar down after each pad. The grain began to really come alive through the polishing. I worked some Before & After Restoration Balm into the surface of the briar of both the bowl and the base with my finger tips. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. I put the bowl and base back together again and rubbed them down with the Balm. I buffed the bowl and base with Blue Diamond on the wheel. The finished bowl looked a lot better. I set the bowl aside and turned my attention to the stem. I polished the stem with micromesh sanding pads – wet sanding it 1500-12000 pads. I wiped it down with Obsidian Oil after each pad to protect it and preserve it. I polished it with Before  After Pipe Polish – both Fine and Extra Fine. I finished the polishing with a final coat of Obsidian Oil. I am really happy with the way that this Tall Television Pipe Churchwarden Sitter turned out. It really is a unique looking pipe with character. The long mouthpiece is a unique feature of this pipe and sets it apart. The removable bowl and base work well and the pipe is a beauty. To me it is a great pipe with unique details. The grain really came alive with the buffing. The rich brown and black stains of the finish gave the grain a sense of depth with the polishing and waxing. The grain really popped. I put the vulcanite stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Television Pipe Sitter really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 10 inches, Height: 3 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 57 grams/2.01 oz. The pipe will be going on the rebornpipes store soon. It will be in the section on French Pipe Makers if you would like to add it to your collection.Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!

I don’t like Painted Pipes – This Jeantet Meerlined Brummer 944 Billiard gives me pause

1 Reply

Blog by Steve Laug

This white Billiard with a Tortoise Shell acrylic stem came to us from an online auction early in 2020 from Columbus, Michigan, US. From the title of the blog you know that I am not a fan of painted pipes. That is probably because I have come to understand that the briar under the paint is quite often horrible and filled with putty and flaws. Paint covers a multitude of “sins” and I am sure this is no exception. Added to that the pipe is also meerschaum lined. What made me pause was the great looking tortoise shell stem and the gold shank band that give the pipe a touch of class. The painted surface was in good condition with no nicks of scrapes. The rim top had a bit of darkening on the meer lining and a little on the paint but even that was not too bad. The bowl did not have a cake which was also a bonus that helped. It is stamped on the left side of the shank and reads Jeantet [over] Brummer and has the shape number 944 stamped on the underside of the shank. The stem has the Jeantet logo on the left side – a J in an oval. On the right side it is stamped Hand Cut and on the underside it is stamped FRANCE. The Tortoise Shell stem is quite pretty but upon examination there is a round bite through on the top side just ahead of the button. Jeff and I had picked up several pipes that the previous owner had customized by filling in the slot with putty and drilling a hole in the top. It was obviously the owner’s attempt at making a “P-lip” style smoker. We are pretty sure this was one of them. In any case it would need to be reworked – opening the slot and filling in the hole on the top side. Jeff took some photos of the pipe before he worked on it. Jeff took photos of the bowl and rim top to show the meer lining and the condition of the rim and bowl. It has some darkening and light lava on the back side but otherwise looked good. He also took photos of the stem to show the hole in the top side. You cannot see it but there is a plug in the slot on the stem end that will need to be removed. Other than that the stem was in excellent condition.Jeff removed the stem from the shank to show the stepped down Delrin tenon and the gold band on the shank end. It is a pretty looking pipe and the shank is surprisingly clean looking.He took photos of the bowl and heel to show the condition of the painted surface. It is quite remarkable that it is in such great condition and appears to have been very well cared for by the previous pipeman or woman. Jeff took photos of the stamping on the shank and the logo on the stem. They read as noted above and were in excellent condition. I turned to Pipephil’s site to see what I could learn about the Brummer line of Jeantet pipes (http://pipephil.eu/logos/en/logo-jeantet.html). There was nothing specific about that line though was a brief summary of the history. I quote from the top bar below:

The company joined the Cuty-Fort Entreprises group (Chacom, Ropp, Vuillard, Jean Lacroix…) in 1992. In 2010 it dropped out and the brand isn’t part of the group any more. The label is owned by the Jeantet family (Dominique Jeantet) again. The pipe production is discontinued. Dominique Jeantet retired in 2000. See also: Antidote, Duke of Kent, Grand Duke, Hermes, Sir Bruce, Sir Duke

I turned to Pipedia to get a more detailed history of the brand (https://pipedia.org/wiki/Jeantet). There as a brief history there that I have reproduced below.

The firm of the Jeantet family in Saint-Claude is first mentioned as early as 1775. By 1807 the Jeantets operated a turnery producing in particular wooden shanks for porcelain pipes and wild cherry wood pipes. The firm was named Jeantet-David in 1816, and in 1837 the enterprise was transformed into a corporation as collective name for numerous workshops scattered all over the city.

The manufacturing of briar pipes and began in 1858. 51 persons were employed by 1890. Desirous to concentrate the workers at a single site, the corporation began to construct a factory edifying integrated buildings about 1891 at Rue de Bonneville 12 – 14. This took several years. In 1898 Maurice Jeantet restructured the business. He is also presumed to enlarge Jeantet factory purchasing a workshop adjoining southerly. It belonged to the family Genoud, who were specialized in rough shaping of stummels and polishing finished pipes. (In these times it was a most common procedure to carry goods from here to there and back again often for certain steps of the production executed by dependent family based subcontractors. Manpower was cheap.)

Jeantet was transformed to a corporation with limited liability in 1938. By that time a branch workshop was operated in Montréal-la-Cluse (Ain), where mainly the less expensive pipes were finished. 107 employees – 26 of them working from their homes – were counted in Saint-Claude in 1948 and 18 in the Ain facility.

The Saint-Claude factory was considerably modernized by ca. 1950 installing (e.g.) freight elevators. In 1952 the southern workshop was elevated. 80 workers were employed in 1958. The factory covered an area of 2831 m²; 1447 m² of the surface were buildings.

The climax of the pipe production was reached around 1969, when thirty to thirty five thousand dozens of pipes were made by 72 workers (1969). But then the production continuously dwindled to only six or seven thousand dozens in 1987 and only 22 workers were still there. Even though, around 1979 a very modern steam powered facility for drying the briar had been installed in the factory’s roofed yard.

Yves Grenard, formerly Jeantet’s chief designer and a great cousin of Pierre Comoy, had taken over the management of Chapuis-Comoy in 1971. Now, to preserve the brand, the Jeantet family went into negotiations with him, and resulting from that Jeantet was merged in the Cuty Fort Group (est. 1987 and headed by Chacom) in 1988 along with the pipe brands of John Lacroix and Emile Vuillard. Chacom closed the Jeantet plant, and the City of Saint-Claude purchased it in 1989. After alternative plans failed, the buildings were devoted to wrecking. The southerly workshop was wrecked before 1992.

Today Jeantet pipes were produced as a sub-brand by Chapuis-Comoy who’s mainstay is Chacom of course.

Jeff carefully cleaned up this Jeantet Brummer Painted Billiard with a Tortoise Shell stem with Murphy’s Oil Soap and a tooth brush to remove the grime on the rim top and bowl sides. He cleaned up the inside of the bowl with a Savinelli Fitsall Pipe Knife, scraping away the light cake on the bowl walls. He scrubbed the internals of the shank and stem with pipe cleaners, cotton swabs and alcohol until the airways were clean and the pipe smelled fresh. The pipe looked much better once the bowl and stem were clean. The plug in the slot of the stem was removed and the hole in the top was cleaned up as well. It was ready to repair when it arrived in Vancouver. I took photos of the pipe before I started my work on it. I took close up photos of the meer lined bowl and the rim top to show the condition. I also took photos of both sides of the stem to give a sense of the damage to the top side and the good condition of the underside.I took photos of the stamping on the left side of the shank and stem and the right side of the stem. It reads as noted above and is very clear and readable.I took the stem off the shank and took photos of the pipe to give a sense of its beauty and proportions.The bowl of the pipe was in excellent condition and did not need any work. The only major issue on the pipe was the hole in the top of the stem. I greased a pipe cleaner with Vaseline and slid it into the slot under the hole in the stem top. I filled in the hole with clear super glue. Once the glue cured it was a white spot that needed more work to blend into the stem surface. Once the repair cured I sanded the repair with 220 grit and polished it with 400 grit wet dry sandpaper. I polished out the tooth chatter on the underside of the stem with the same sandpaper and started polishing it.I used a dark brown and black stain pen to approximate the feathery wisps of the tortoise shell finish of the acrylic. I gave the repair a top coat of clear CA glue and let it cure. I sanded the spot smooth.I polished the stem surface with micromesh sanding pads. I wet sanded it with 1500-12000 grit sanding pads. I wiped the stem down after each pad with Obsidian Oil. I polished it with Before & After Stem Polish both Fine and Extra Fine polish. I gave it a final rub down with Obsidian Oil. I lightly buffed the bowl and stem with Blue Diamond on the buffing wheel and gave it a coat of Conservator’s Wax to seal and protect it. The pipe took on a deep shine in the painted briar and in the tortoise shell acrylic stem. The twin ring gold band also looked very good. It was an interesting looking pipe. The dimensions of the pipe are Length: 6 inches, Height: 2 inches, Outer Diameter of the bowl: 1 ¼ inches, Diameter of the chamber: ¾ of an inch. The weight of the pipe is 60 grams/2.12 oz. The photos below show the finished pipe. It is a surprisingly nice looking pipe. If you would like to add it to your collection I will be adding it to the French Pipe Makers section of the rebornpipes store. Send me a message or an email. Thanks for reading the blog. It was an interesting restoration.

What a Beautifully Grained Proctus Deluxe Old Briar 71 Bent Egg/Brandy

Leave a reply

Blog by Steve Laug

The next pipe on the table is a brand I have not worked on before – a Proctus Deluxe bent egg or Brandy (not sure what I would call it). The pipe was purchased back in February of 2020 from an antique mall in Northern Utah, USA. It is stamped on the left side of the shank and reads PROCTUS [over] De Luxe. On the right side it is stamped Made in Denmark [over] the shape number 71. On the underside of the shank it reads Old Briar. It is a beautifully shaped briar with great looking straight and flame grain around the bowl sides. The finish is dirty with grime ground into the briar. There are some dents on both sides of the bowl toward the heel. The rim top has a thick coat of lava that has overflowed from the bowl onto the top. There is a thick uneven cake in the bowl that overflows on to the top. There is tobacco debris all around the inside of the bowl. It is hard to know the condition of the inner edges of the bowl because of the cake and the lava. More will be clear once it has been cleaned and removed. The stem is oxidized and the end is calcified and has tooth chatter or marks on the top and underside near the button. Jeff took photos of the pipe before he worked his magic on it in the cleaning. Jeff took close up photos of the rim top to show the thick lava and the uneven thick cake in the bowl. The outer edges of the bowl look very good. The condition of the inner edge is hard to assess due to the thickness of the cake and lava. He took photos of the stem to show the oxidation, calcification and tooth chatter and marks on the stem surface.He took photos of the sides of the bowl and heel to show the beauty of the grain around the bowl sides. It really a beautiful pipe. He took photos of the stamping on the sides of the shank. It is clear and readable as noted above. I turned to Pipephil’s site to see what I could learn about he Proctus brand and the Danish pipe maker (http://pipephil.eu/logos/en/logo-p5.html). The screen capture below shows a brief description of the stamping on the pipe and the side bar says that “the maker of the Proctus brand is probably Bari (to be confirmed)”. The information was very limited and not overly helpful.It was time to see what Pipedia had on the brand (https://pipedia.org/wiki/Proctus). That site was a little more definitive and link the pipes to Danish carver Viggo Nielsen (of Bari). The Bari connection was present but it was not an obvious sub group of Bari. I quote in full the article there:

Proctus pipes are out of Denmark, and thought to be made by Danish carver Viggo Nielsen (of Bari) in the 1960’s. Some have vertical hand rustication and some smooth, model names are known to be DE LUXE and OLD BRIAR.

I have to say I was really looking forward to seeing what Jeff had done to this Danish Made Proctus pipe when I took it out of the box. It had shown such beauty through the grime so I was quite sure it would be stunning. He reamed the bowl with a PipNet pipe reamer and cleaned the remnants of cake back with a Savinelli Fitsall Pipe Knife.  He scrubbed the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and oils. He cleaned the internals of the shank and stem with pipe cleaners, cotton swabs and alcohol to remove all of the tars and oils there. He scrubbed the exterior of the stem with Soft Scrub and then soaked it in a bath of Briarville’s Pipe Stem Deoxidizer. He rinsed off the deoxidizer with warm water and wiped the bowl and stem down with a light coat of olive oil to rehydrate both. The pipe really was quite stunning. You can see the nicks on the bowl sides near the heel on both sides but they do not lessen the beauty of the pipe. I took close up photos of the stem and the rim top to show both how clean they were and what needed to be addresses with both. The rim top had some darkening around the inner edge and some rough spots that needed to be smoothed out. The stem looked better but the tooth marks and chatter were still present. I would need to remove those to bring the stem back.I took photos of the cleaned up stamping on the shank sides. It is very clear and readable.I removed the stem from the shank and took photos to show the overall look of this beautiful pipe.I started my work on the pipe by addressing the rough inner edge of the rim. I used a folded piece of 220 grit sandpaper to smooth it out and give it a very slight bevel to minimize the damage.I filled in the deep nicks on the heel of the bowl with clear CA glue. Once it cured I blended them into the surrounding briar. I polished the briar with micromesh sanding pads – wet sanding with 1500-12000 grit pads. I wiped the briar down after each pad. The grain began to really come alive through the polishing.I worked some Before & After Restoration Balm into the surface of the briar with my finger tips. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. I set the bowl aside and turned my attention to the stem. I “painted” it with the flame of a Bic lighter to lift the tooth marks and even out the surface of the stem. I filled in the remaining tooth marks with clear CA glue and once the glue cured I sanded them smooth with 220 grit sandpaper and started polishing it with 400 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – wet sanding it 1500-12000 pads. I wiped it down with Obsidian Oil after each pad to protect it and preserve it. I polished it with Before After Pipe Polish – both Fine and Extra Fine. I finished the polishing with a final coat of Obsidian Oil.This nice looking Proctus De Luxe Old Briar 71 Bent Egg with a vulcanite taper stem is a great looking pipe now that it has been restored. The briar is clean and the grain really came alive. The rich brown and black stains gave the grain a sense of depth with the polishing and waxing. The grain really popped. I put the vulcanite stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Proctus De Luxe Old Briar 71 Bent Egg really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ¾ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 52 grams/1.83 oz. The pipe will be going on the rebornpipes store soon. It will be in the section on Danish Pipe Makes if you would like to add it to your collection.Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!

Restoring a Kaywoodie “Standard” # 08 Straight Dublin From Steve’s Grab Box

Leave a reply

Blog by Paresh Deshpande

Re-Cap…
During one of the many Facetime interactions with Steve, I expressed my anxiety of ‘what after’ I had gone through restoring all of my inherited collection. Also discussed during this interaction was that I would be interested in working on pipes from various makers and with greater variety of repair works to gain more experience and learn new techniques. Since the ‘pipe culture’ in India met its last in the early 1970s, I did not have access to large lots of estate pipes as is available in Europe and USA. Steve suggested that I grab one of the “grab bags” which he had in his store. I requested him to make one from an assortment of pipes that he had to which he agreed. Soon the awaited grab bag along with other pipes that I had liked arrived in my home town and was received by Abha. She sent me this picture of the pipes that were received. The one crossed in red is a Dunhill sitter that is added to my personal collection.There are a total of 15 pipes in the grab bag, each with different shapes, issues and requiring different skill sets to address them. This is exactly what I was looking for and that there are some nice branded ones is like an icing on the cake. This lot included pipes that Jeff, (Steve’s brother who does all the preliminary cleaning of pipes) had cleaned and sent to Steve for further restoration works.

Returning To The Present…
The next pipe on my work table is KAYWOODIE “STANDARD” in a classic Dublin shape from Steve’s grab bag that had been reamed, cleaned and readied for next stage of restoration by Jeff. This pipe is indicated in pastel blue arrow with the numeral 4.This petite ultra lightweight pipe has some beautiful and densely packed cross grains on the front, aft and over the shank surface of the stummel while bird’s eye adorns the sides of the bowl. The stamping of “KAYWOODIE” in capital letters over “STANDARD” in script over “IMPORTED BRIAR” is on the left side of the shank. The right side of the shank bears the shape code “08”. The stem, with its three holed aluminum threaded stinger, bears the Kaywoodie trademark inlaid white Clover Leaf logo on the left side of the stem. The lower surface of the stem is stamped as “J 40” towards the stinger end. The lack of KB & B stamping in clover leaf over the shank surface and the three holed aluminum stinger, points to a later era Kaywoodie pipe. The shape code # 08 finds mention in the 1936 catalog as medium Dublin (indicated by the red arrow) and is conspicuous by its absence in the 1970s. (Refer Kaywoodie – Pipedia)The Standard grade stamp indicates this pipe to be the cheapest offering from Kaywoodie at the time and is described as “the original dry- smoking, pure smoking pipe” in the flyer (indicated by the red tick mark) that was available on pipedia.org. The same has been reproduced below for ease of reference. Collector’s Guide to Kaywoodie Pipes – PipediaThus, the Kaywoodie Standard presently on my work table dates to pre-1970s (not a definitive supposition) but definitely post 1950s when the stinger head size was reduced in diameter and three holes replaced the four holes. In spite of my best efforts, I have not come across any concrete information on the stamp “J 40”. It is my guess that this is the code that would help for replacing the stem by Kaywoodie retail outlets in the event that the original stem is broken by the owner.

Initial Visual Inspection
This grab bag that Steve had sent me contained few pipes that Jeff had already cleaned and sent across to Steve for further restoration. Thus, unfortunately, before condition pictures are not available with me to share with the readers, but the best part is that I get to work on a pipe that Jeff has already worked his magic upon and presented me with a clean pipe. Below are a few pictures of the pipe as I had received it. Detailed Inspection
The chamber is clean and odorless without any trace of the old cake. There is no damage to the inner walls of the chamber. The rim top and the rim edges is where the maximum damage can be seen on this pipe. The rim top has darkened not because of lava overflow, but maybe due to charring, notably between 11 o’clock and 1 o’clock direction (encircled in yellow). The rim top surface is peppered with numerous scratches, dents and dings (few of them are indicated by indigo arrows) and probably caused due to knocking the rim against a hard surface to remove the dottle. There is significant damage to both the inner and outer edge of the rim all around. The inner rim appears charred along the 12 o’clock direction and is encircled in red. The outer rim damage too is significant with sever chipped surface in 6 o’clock and 8 o’clock directions (encircled in green) and dents/ dings and chipping all along the edge. The draw is smooth, full and open. Simple topping of the bowl on a piece of 220 grit sandpaper should address this issue, however, in addressing this issue, though I absolutely hate it unfortunately, I would be losing some briar estate, a price I am willing to pay to resurrect this beauty. The stummel is clean with some interesting grain pattern that needs to be brought to the fore. There are few minor scratches, dents and dings on the stummel surface. Maybe, sanding and further micromesh polishing will address these dents and scratches. The stummel has a rich golden brown hue to the briar. The shank end of the pipe, including the aluminum spacer, is clean and so is the mortise. The tapered vulcanite stem has a couple of deep tooth indentation and minor tooth chatter on both the upper and lower surface near the button edge in the bite zone. Both upper and lower buttons are worn out and has bite marks. The stem has deep seated oxidation and some amount of calcification is seen in the bite zone. The threaded aluminum stinger tenon is also clean and the seating of the stinger in the shank is flush and perfectly aligned with the shank face. The air way is clear and draw is easy and smooth.The Process
Since Jeff had done the initial cleaning, I straight away get on with addressing the issues as observed during my initial inspection. I decided to start this restoration with stem repairs and cleaning as this takes up the maximum time in the entire restoration process.

I ran a couple of hard bristled and regular pipe cleaners dipped in alcohol to be sure that the internals of the stem are cleaned out. I sand the entire stem with a folded piece of 220 grit sandpaper to loosen the oxidation from the surface before dunking the stem in to a solution of “Before and After Deoxidizer”. The initial sanding helps in efficient drawing out of the deeper oxidation. I let the stem soak in the deoxidizer solution overnight. Since I had some time before I called it a day, I decided to address the damage to the outer rim edges. I filled the larger chipped outer rim edge surfaces with a mix of briar dust and super glue. I would need to top the rim surface to address the issue of numerous dings and scratches on the rim top and during this process the briar dust and CA glue fill would also even out to match perfectly with the surrounding surface. I set the stummel aside for the fill to cure overnight. The next morning, I removed the stem that had been soaking in the deoxidizer solution overnight. I cleaned the stem and the stem airway under running warm water and scrubbed the raised oxidation from the stem surface using a Magic Eraser pad followed by scotch brite pad. I cleaned the stem airway with a thin shank brush and blew through the airway to completely remove the deoxidizer solution. I further removed the oxidation by scrubbing the stem with 0000 grade steel wool and applied a little EVO to rehydrate the stem.Next, I filled the tooth indentations in the lower surface with a mix of clear CA superglue and activated charcoal and set it aside to cure. After the glue had partially hardened on the lower surface, likewise, I filled the upper surface tooth marks. Simultaneously, I smeared the button on either surface with the mix of charcoal and superglue and set the stem aside for the mix to harden completely.With the stem fills set aside, I sand the fill on the outer rim edge with a flat head needle file and to further blend the fill with the surrounding briar surface, I sand it with a folded piece of 220 grit sand paper. Next, I top the rim on a piece of 220 grit sandpaper to address the issue of uneven rim top surface and the dents and dings on the rim edge (this is a necessary evil). I frequently checked the rim top for the progress made and stopped immediately once I had achieved the desired results. The rim top looks refreshed with no darkening and charring. The rim edge damage has also been addressed to a great extent. I followed up the topping of the rim top with the sanding of the entire stummel surface with a folded piece of 220 grit sand paper. This addressed the minor dents and dings on the stummel that I had initially observed and also evened out the entire stummel surface. I was careful around the stampings on the shank.Thereafter, I moved to the next stage of polishing and revitalizing the entire rim top and the stummel. I polished the stummel by wet sanding with 1500 to 2000 grit wet or dry sand paper and followed it up with further wet sanding with 3200 to 12000 grit micromesh pads. I wiped the stummel with a moist cloth after each wet pad to see the progress and am extremely pleased with the end result. I rub a small quantity of “Before and After Restoration Balm” in to briar and let it rest for a few minutes. The balm almost immediately works its magic and the briar now has a nice vibrant appearance. I further buff it with a horse hair shoe brush.Now that the stummel refurbishing save for final wax polish is completed, I turn my attention back to the stem. A little bit of filing with a flat head needle file followed by sanding with folded pieces of 220 and 600 grit sand papers got the stem fills all matched up with the stem surface. The buttons and the button edges are now even and crisp. I polished the stem with micromesh sanding pads – wet sanding with 1500 to 12000 grit pads. I rubbed the stem down with Extra Virgin Olive Oil and set the stem aside to dry.To finish, I re-attach the stem with the stummel. I mount a cotton cloth buffing wheel on to my hand held rotary tool and applied several coats of carnauba wax over the stummel and the stem. I finished the restoration by giving the pipe a rigorous hand buffing using a microfiber cloth to raise the shine further. The completed pipe, with the natural finish and beautiful grains on the stummel contrasting with the shiny black stem looks lovely, fresh and vibrant; the photographs speak for themselves.P.S. The pipe has turned out beautiful, far more luxurious and vibrant in person, than it appears in pictures. The petite size and light weight makes it ideal for a coffee break smoke or enjoying your favorite blend while you are busy at your work table. If this pipe calls out to you, please let me know at deshpandeparesh@yahoo.co.in.

Thank you all for being a part of this journey with me. Praying for the health and safety of you and your loved ones in these troubled times. Stay home, light a pipe and be safe!

Resurrecting What I think is an older Comoy’s Sandblast 43 Bent Billiard

1 Reply

Blog by Steve Laug

The next pipe on the work table came to us from a fellow in Brazil, Indiana, USA in March of 2020. The pipe is a classic looking Bent Billiard that has a deep and rugged sandblast. The pipe is stamped on the underside of the shank and reads Comoy’s [over] Sandblast followed by Made in London [over] England followed by the shape number 43. The stain is a mix of browns that contrasts well with the black of the hard rubber stem. The finish was very dirty with grime ground into the finish making it hard to see beyond that to the grain underneath. There was a thick cake in the bowl and it had overflowed with lava onto the rim top and edges. It was hard to know at this point the condition of the rim edges. The stem was made of hard rubber which pointed to an earlier date for the making of the stem. The stem had no stamping or identifying marks on it. Jeff took photos of the pipe before he started working on it. I include those below. He took photos of the rim top to show the thick cake and the thick lava coat on the edge and onto the top. It is hard to know what the condition of the rim top and edges is like under that thick lava. It is an incredibly dirty pipe but obviously one that was a great smoker. The stem has tooth marks and chatter on both sides ahead of the button. It also has some residue left behind by a rubber Softee Bit. He took photos of the sides and heel of the bowl to show the beautiful sandblasted grain around the bowl and the condition of the pipe. You can see the grime ground into the surface of the briar.    He took photos of the stamping on the underside of the shank. It is clear and readable as noted above. Jeff took a photo of the underside of the shank showing a shrunken fill with a crack in it. Fortunately it was not in the briar but in the fill itself. I turned to Pipedia (https://pipedia.org/wiki/Comoy%27s) and reread the great history of the brand and found an advertizement for the Sandblast line. I include that advert below.I turned to the listing on the site that gave shape numbers and a description of the various shapes in chart form (https://pipedia.org/index.php?title=Comoy%27s_Shape_Number_Chart). I found the shape number 43 which was on this pipe. It is described in the chart below as a ½ Bent Billiard in a large size. That is a perfect description of the pipe I am working on.It was time to work on the pipe. As usual Jeff had done a thorough cleanup on the pipe. He reamed the bowl with a PipNet pipe reamer and followed up with a Savinelli Fitsall pipe knife to remove the cake. He scrubbed out the mortise and the airway in the shank and the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the bowl, rim, shank and stem with a tooth brush and Murphy’s Oil Soap to remove the oils and tars on the rim and the grime on the finish of the bowl. He rinsed it under running water. He dried it off with a soft cloth. He cleaned the internals and externals of the stem with alcohol, pipe cleaners and cotton swabs. He soaked the stem in Briarville’s Pipe Stem Deoxidizer and rinsed it off with warm water and cleaned out the airway in the stem with alcohol. This Bent Billiard pipe actually was quite stunning!   I took a photo of the rim top and stem to show the condition. The rim top and edges looked very good. The hard rubber stem had tooth chatter and marks on both sides ahead of the button and on the button edges. There was one deeper large one on the underside of the stem. I removed the stem and took a photo of the pipe to give a sense of the whole. It is a nice looking pipe that should clean up very well. I decided to address the crack in the fill on the underside of the shank first. I filled it in with clear CA glue and once it cured I smooth out the repair with 1500-2400 micromesh sanding pads. It looked much better once it was finished. I rubbed the bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the bowl sides and shank with my fingertips to clean, enliven and protect the briar. I let the balm sit for a little while and then buffed with a cotton cloth to raise the shine. The Balm did its magic and the grain stood out.   I set the bowl aside and turned my attention to the stem. I “painted” the tooth marks on the stem with the flame of a lighter to raise them. I filled in the remaining tooth marks with clear CA glue and set it aside until the repairs cured. I used a small file to flatten the repair and recut the edge of the button. I sanded the repaired areas with 220 grit sandpaper to blend them into the stem surface and also worked on the remaining oxidation at the shank junction. I started the polishing process with 400 grit wet dry sandpaper.   I polished the hard rubber stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. The photo below shows the polished stem. This nice looking older Comoy’s Sandblast 43 Bent Billiard with a hard rubber taper stem is a great looking pipe now that it has been restored. The briar is clean and the blast really came alive. The rich brown and black stains gave the blast a sense of depth with the polishing and waxing. The grain really popped. I put the hard rubber stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Comoy’s Sandblast Bent Billiard really is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: 7/8 of an inch. The weight of the pipe is 54 grams/1.90 oz. The pipe will be going on the rebornpipes store soon. It will be in the section on British Pipe Makes if you would like to add it to your collection.Thanks for reading this blog and my reflections on the pipe while I worked on it. There are many more to come!

A Simple Restoration Of An Inherited BBB “Thorneycroft” # 637 Sandblast Billiard

Leave a reply

Blog by Paresh Deshpande

I love my classic shaped pipes and one such pipe from my inheritance is now on my work table. It’s a classic tapered stem Billiard with a deep scraggy sandblasted stummel. The moment I picked it up, I knew this could be a Barling’s “Fossil” or some English brand. The sandblast, quality of the stem and the briar all oozed quality. The stem logo of BBB in brass rhombus did bring an inadvertent smile on my face. I love this brand and have a few BBBs in my collection.

The pipe is a classic Billiard shaped sitter with deep craggy sandblast that feels tactile in the hand. It has a medium sized bowl and is very light in weight. This pipe is stamped on the bottom smooth surface of the shank with shape code #637 at the foot followed by “BBB” in a rhombus with “OWN MAKE” on either side in block capital letters. Further towards the shank end on the same smooth surface, it is stamped as “THORNEYCROFT” over “LONDON ENGLAND”. The high quality vulcanite tapered stem bears the trademark inlaid BBB brass diamond logo on the upper surface of the stem. The stampings are all crisp and clear.  If you are interested to know anything about BBB pipes, look no further than rebornpipes.com!! This is Steve’s favorite brand and he has been researching and collecting BBB pipes for decades. I visited rebornpipes and sure enough there was a write up on “History of BBB Pipes”! Here is the link to the blog (https://rebornpipes.com/2012/08/05/history-of-bbb-pipes/).

I had worked on a BBB 2 Star “SPECIAL” pipe and had extensively read about the brand and its various lines through the years which also helped in dating BBB pipes. Here is the link to the write up with a request to the esteemed Readers to refer to the write up for detailed information on the brand and dating of BBB pipes (Restoring a 2 Star BBB “Special” # 395 | rebornpipes).

The information reproduced below places the pipe to be made between 1950 and 1960.
During the middle of 1950s and 1960s, BBB lines were comparatively stable. The top pipes of the line were stamped Own Make “Rare Grain”, followed by Own Make “Virgin”, Own Make “Walnut” and finally Own Make “Thorneycroft”.

Armed with the above information, I moved ahead with initial inspection of the pipe…

Initial Visual Inspection
The deeply sandblasted saddle stem sitter is covered in dirt, dust and grime. There is a thick layer of cake in the chamber and the mortise shows accumulation of dried old oils and tars. The tapered vulcanite stem is heavily oxidized and the bite zone is peppered with minor tooth chatter on both the surfaces. There are a few deep bite marks on either surface in the bite zone with what appears to be a cracked button edge on the lower surface. Here is how the pipe appears as it sits on my work table. Detailed Inspection Of The Pipe And Observations
The bowl is nicely rounded with a chamber depth of about 2 inches. The chamber has a layer of thick cake that is slightly thicker in the bottom half of the chamber. The sandblasted rim top surface has worn out (or not?) and now appears shallow blasted/smooth in most places. The inner and outer rim is in pristine condition, save for suspected minor darkening of the inner edge in 1 o’clock direction. The condition of the inner walls of the chamber can be commented upon after the cake has been taken down to the bare briar. The chamber has strong smells from the old tobaccos. The draught hole is in center at the bottom of the chamber with a nice wide open airway and this makes me believe that it should smoke smooth to the last morsel of tobacco in the chamber. The stummel, all around appears solid to the touch and hence I do not foresee any serious damage to the walls in the form of burnout/ deep heat fissures/ lines or pits. I may have to resort to the salt and alcohol treatment of the chamber if the ghost smells do not reduce after the cake has been removed and the shank internals are thoroughly cleaned.The crevices in the sandblasted surface are filled with dust, dirt and grime from all the years of smoking and storage. The fact that the grooved patterns are dusty and filled with dirt is accentuated more due to the brown and black hues on the stummel and the shank. The briar looks lifeless and bone dry and has taken on dirty grey hues. The mortise shows accumulation of oils, tars and gunk and the air flow is not full and smooth. I need to be careful while cleaning the shank bottom surface to preserve the stampings on this pipe. Thorough cleaning and rising under warm water of the stummel surface should highlight the grain patterns, depth and cragginess of the sandblast. The high quality straight vulcanite stem is so heavily oxidized that it appears brownish green in color. Some minor tooth chatter and deep bite marks are seen on both surfaces of the stem in the bite zone along with minor calcium deposits. This issue should not be a major headache to address. The lip edge on both sides has minor bite marks and would need to be reconstructed and reshaped. A crack across the button edge on the lower surface is seen (encircled in pastel blue) and would need to be addressed. The tenon has accumulated ash and oils/ tars that have dried out on the inside as well as on the outside. The horizontal slot has tar deposits which will have to be cleaned. The tooth chatter and the bite marks will be raised to the surface by heating and the deeper tooth indentations will be filled using charcoal and CA superglue mix.The Process
I started the restoration of this pipe by first reaming the chamber with size 1, 2 and 3 Castleford reamer heads. I further scraped the chamber walls with my fabricated knife to remove the remaining carbon deposits. Once the cake was reamed back to the bare briar, I used a 150 grit sand paper followed by 220 grit sand paper to remove all the traces of remaining cake and also to smooth out the inner walls of the chamber surface. Finally, to remove the residual carbon dust, I wiped the chamber with a cotton pad wetted with 99.9% pure isopropyl alcohol. The chamber walls are sans any damage. The smells from the chamber are greatly reduced and would be completely eliminated once the shank internals are thoroughly cleaned.This was followed by cleaning the mortise pipe cleaners and shank brush dipped in isopropyl alcohol. I scraped the walls of the mortise with my fabricated knife to remove the dried oils and tars. Though this further eliminated trace of old smells from previous usage, I will continue further cleaning of the shank internals while cleaning the external surface of the stummel. Next, I moved to clean the exterior of the stummel. I generously applied “Briar Cleaner”, a product that has been developed by my friend Mark Hoover, to the external surface of the bowl and the sandblasted rim top surface. It works similar to Murphy’s oil soap and needs to be applied to the stummel surface and set aside for 5-10 minutes. The product pulls out all the dirt and grime to the surface making further cleaning easy. I am quite happy with this product. I used a hard bristled tooth brush to scrub the stummel and rim top with the solution. After the scrub with Briar cleaner solution, I washed the stummel under running warm water with anti oil dish washing detergent till the stummel surface was clean and dried it using paper towels and a soft cotton cloth. I deliberately cleaned the sandblasted rim top with hard bristled toothbrush and set the stummel aside to dry out naturally. I simultaneously cleaned the shank internals with the detergent and hard bristled shank brush. The stummel surface has cleaned up nicely with the intricate sandblast patterns on full display. The shank internals too are nice and clean. The brown hues of the raised portions of the sandblast contrast beautifully with the black of the rest of the stummel. These brown hues will darken considerably once the stummel briar is rehydrated and rejuvenated using the balm and subsequent wax polishing. The rim top surface has cleaned up nicely to reveal pristine inner and outer rim edges, though lighter in color as compared with the rest of the stummel surface. The ghost smells are completely eliminated at this stage. I began the stem repairs by first cleaning the internals of the stem with bristled pipe cleaners and 99.9% pure isopropyl alcohol. I scraped out the dried oils and tars from the tenon end with my fabricated knife and also removed the calcified deposits from the bite zone. I followed it up by sanding the entire stem with a folded piece of 220 grit sand paper to remove the surface oxidation. It has been our (Abha and my) experience that sanding a stem before dunking it in to the deoxidizer solution helps in bringing the deep seated oxidation to the surface which in turn makes further cleaning a breeze with fantastic results.I dropped the stem in to “Before and After Deoxidizer” solution developed by my friend Mark Hoover. The solution helps to draw out heavy oxidation to the surface, making it’s further removal a breeze, while the minor oxidation is eliminated to a very great extent. The initial sanding helps to draw out the complete oxidation as the sanding opens up the stem surface that has been initially covered with oxidation. I usually dunk stems of 4-5 pipes that are in-line for restoration and this pipe is marked by a yellow arrow. I generally allow the stems to soak in this solution overnight to do its work.The next morning, Abha removed the stems that had been soaking in the deoxidizer solution overnight. She cleaned the stem and the stem airway under running warm water and scrubbed the raised oxidation from the stem surface using a Scotch Brite pad and the airway with a thin shank brush. She further removed the oxidation by scrubbing the stem with 0000 grade steel wool and applied a little EVO to rehydrate the stem. This now gives a clearer picture of the extent of crack as can be seen in the pictures below. These will definitely require a fill.I used a 220 grit sand paper to sand the stem and remove all the oxidation that was raised to the surface. This step further reduced the tooth chatter and bite marks present on the stem. I wiped the stem with Murphy’s Oil soap on a cotton swab. This helps in cleaning the stem surface while removing the loosened oxidation. Using a lighter, I flamed the surface of the stem. This helped in raising some of the tooth chatter and bite marks to the surface as vulcanite has a property to regain it’s original shape on heating. I addressed the crack over the lower button and the button edges by filling them up with a mix of activated charcoal and CA superglue. I applied a slightly thick layer over the lip which I will later sanded down to create a defined edge. Once I had applied the mix, I set it aside to cure overnight. My apologies for bungling on taking pictures, but the readers will get a picture of the process in general. While the stem repairs were curing, I rubbed generous quantity of “Before and After Restoration Balm” in to the stummel surface with my finger tips, working it deep into the sandblasts and let it rest for a few minutes. I rubbed the balm into the sandblasted rim top surface too. The balm almost immediately works it’s magic and the briar now has a vibrant appearance with the beautiful sandblast patterns displayed in their complete splendor. The contrast of the dark browns of the raised sandblast with the dark black of the rest of the stummel adds an interesting dimension to the appearance of the stummel. I further buffed it with a horse hair brush. As I was taking close up pictures of the stummel, I observed a webbing of very minute heat lines to the front of the chamber wall (indicated by yellow arrows). Though not an issue if the pipe is smoked gently, it may lead to a burnout subsequently in the hands of an enthusiastic smoker. I shall give a thin protective bowl coating of yogurt and activated charcoal. This will firstly prevent the burning tobacco coming in direct contact with the briar and secondly aid in faster cake build up.  I addressed this issue by mixing activated charcoal and plain yogurt to a thicker consistency, just enough that it would spread easily and applied it evenly all along the chamber walls after inserting a folded pipe cleaner through the draught hole to keep it open. Once dry and set, this will not only protect the walls but also aid in faster buildup of cake.With the stummel rejuvenation almost complete, save for the final wax polish, I worked the stem. The fill had cured and with a flat head needle file, I worked on the filling till I had achieved a rough match with the surrounding surface and had sufficiently sharpened the button edges. For a better blending, I further sanded the entire stem with 220 followed by 400, 600 and 800 grit sand papers. This helps to reduce the scratch marks left behind by the more abrasive 220 grit paper. To bring a deep shine to the vulcanite stem, I went through the complete set of micromesh pads, wet sanding with 1500 to 2000 grit sandpapers and dry sanding with 3200 to 12000 grit pads. I wiped the stem with moist cloth after each pad and rubbed it down with Extra Virgin Olive oil to rejuvenate the vulcanite. The finished stem is shown below.To complete the restoration, I mounted a cotton cloth buffing wheel on to my hand held rotary tool and applied several coats of carnauba wax. I finished the restoration by giving the entire pipe a rigorous hand buffing using a microfiber cloth to raise the shine further and remove any residual wax from in between the sandblasts. The finished pipe looks amazingly beautiful and is now ready for its long second innings with me. I only wish it could share with me the stories of its past years while I enjoy smoking my favorite Virginia blend in it or maybe just keep admiring it !! The finished pipe is as shown below. P.S. – A few weeks earlier, there was another pipe that I had restored (WALLY FRANK Ltd “BLACKTHORNE”) and one which required a bowl coat of activated charcoal and yogurt. It was while I coated the chamber walls of this pipe that I coated the walls of the chamber of BLACKTHORNE pipe to protect them by helping in a speedy formation of cake. Apologies for the missing pictures though…

I wish to thank each one for sparing their valuable time to read through this write up and praying for the health and safety of you and your loved ones. Stay home…stay safe!!

This was a Stunning Butz-Choquin Camargue 1025 Rhodesian once it came back to life

1 Reply

Blog by Steve Laug

The next pipe on the work table came to us from an antique mall in Logan, Utah, USA early in 2021. The pipe is a classic looking Butz-Choquin that has a marbleized acrylic shank extension.  The pipe is stamped on the sides of the shank. On the left side of the shank it reads Butz-Choquin [over] Camargue and on the right side it reads St. Claude [arched over] France [over] the shape number 1025. The stain is a mix of browns that contrasts well with the marble like shank extension. The finish was very dirty with grime ground into the finish making it hard to see beyond that to the grain underneath. There was a thick cake in the bowl and it had overflowed with lava onto the rim top and edges. It was hard to know at this point the condition of the rim edges. The stem was vulcanite and was a military mount fish tail stem. The stem had no stamping or identifying marks on it. Jeff took photos of the pipe before he started working on it. I include those below. He took photos of the rim top to show the thick cake and the thick lava coat on the beveled edge and onto the top. It is hard to know what the condition of the rim top and edges is like under that thick lava. It is an incredibly dirty pipe but obviously one that was a great smoker. The shank extension looks good and is acrylic. The stem has tooth marks and chatter on both sides ahead of the button. He took photos of the sides and heel of the bowl to show the beautiful grain around the bowl and the condition of the pipe. You can see the grime ground into the surface of the briar.     He took a photo of the stamping on the sides of the shank. It is clear and readable as noted above. He also captured the BC stamp on the shank extension. The shank extension was loose on the shank and had come unglued. It was filthy and the glue was dried and the extension came off. Jeff took photos of the parts.    I remembered that I had worked on a Camargue pipe by Butz-Choquin before so I turned to the blog and did a search (https://rebornpipes.com/2020/10/24/fresh-life-for-a-butz-choquin-camargue-bent-rhodesian-sitter/). I quote from that blog and also from one that Dal Stanton wrote.

Dal Stanton had written a blog on his restoration of a Camargue pipe for rebornpipes in the past (https://rebornpipes.com/2019/12/04/rejuvenating-a-fancy-french-butz-choquin-camargue-1683-prince/). I turned to that now for a quick review of the history of the line. I quote:

I’ve worked on several Butz Choquin pipes which is based in the French pipe center of St. Claude.  Here is a brief overview of the BC history from http://www.pipephil.eu/logos/en/logo-butzchoquin.html

The origin of the brand reaches back to 1858 when Jean-Baptiste Choquin in collaboration with his son-in-law Gustave Butz created their first pipe in Metz (France). Since 1951 Butz-Choquin Site officiel Butz Choquin, pipes de Saint-Claude Jura. BC pipe de bruyere luxe is a brand of the Berrod-Regad group (Saint-Claude, France).

Jean Paul Berrod managed the company from 1969 to 2002 when he retired and sold the corporate to Mr Fabien Gichon. Denis Blanc, already owner of EWA, took over the S.A. Berrod-Regad in 2006.

The BC line, ‘Camargue’ is not an old line as a simple search on the internet turns up several examples of classic pipe shapes with the ‘Camargue’ stamp, but unique to each is the acrylic shank extension and the military mounted stem.  This example is a Dublin shape from (https://www.smokingpipes.com/pipes/estate/france/moreinfo.cfm?product_id=189826).Dal had also done some research on the name Camargue that I have included below. For me this kind of information adds colour to the restoration that I am working on.

…The name of the line, ‘Camargue,’ I discovered is a treasured nature reserve on the southern coast of France between Montpellier and Marseille – two beautiful venues which I’ve had the opportunity to visit. A Wiki article was very helpful in describing the area that this BC line is commemorating (https://en.wikipedia.org/wiki/Camargue).

With an area of over 930 km2 (360 sq mi), the Camargue is western Europe’s largest river delta. It is a vast plain comprising large brine lagoons or étangs, cut off from the sea by sandbars and encircled by reed-covered marshes. These are in turn surrounded by a large cultivated area.
Approximately a third of the Camargue is either lakes or marshland. The central area around the shoreline of the Étang de Vaccarès has been protected as a regional park since 1927, in recognition of its great importance as a haven for wild birds. In 2008, it was incorporated into the larger Parc naturel régional de Camargue.

The Camargue is home to more than 400 species of birds and has been identified as an Important Bird Area (IBA) by BirdLife International.[8] Its brine ponds provide one of the few European habitats for the greater flamingo. The marshes are also a prime habitat for many species of insects, notably (and notoriously) some of the most ferocious mosquitos to be found anywhere in France. Camargue horses (Camarguais) roam the extensive marshlands, along with Camargue cattle (see below).

The native flora of the Camargue have adapted to the saline conditions. Sea lavender and glasswort flourish, along with tamarisks and reeds…It was time to work on the pipe. As usual Jeff had done a thorough cleanup on the pipe. He reamed the bowl with a PipNet pipe reamer and followed up with a Savinelli Fitsall pipe knife to remove the cake. He scrubbed out the mortise and the airway in the shank and the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the bowl, rim, shank and stem with a tooth brush and Murphy’s Oil Soap to remove the oils and tars on the rim and the grime on the finish of the bowl. He rinsed it under running water. One of the benefits of this scrub is that it also tends to lift some of the scratches and nicks in the surface of the briar. He dried it off with a soft cloth. He cleaned the internals and externals of the stem with alcohol, pipe cleaners and cotton swabs. He soaked the stem in Briarville’s Pipe Stem Deoxidizer and rinsed it off with warm water and cleaned out the airway in the stem with alcohol. This Rhodesian pipe actually was quite stunning! I took a photo of the rim top and stem to show the condition. The rim top looked very good. There was some darkening on the rim top and the inner edge of the bowl. The loose shank extension would need to be aligned and glued. The vulcanite stem had light tooth chatter and marks on both sides ahead of the button and on the button edges. I removed the stem and the extension from the shank and took a photo of the pipe to give a sense of the whole. It is a nice looking pipe that should clean up very well.  I aligned the extension in the shank and glued it in place with clear CA glue.    I polished the briar with micromesh sanding pads – wet sanding with 1500-12000 grit pads and wiped down the bowl after each sanding pad. I rubbed the bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the bowl sides and shank with my fingertips. I worked it into the twin rings around the bowl cap with a horsehair shoe brush. The product works to clean, enliven and protect the briar. I let the balm sit for a little while and then buffed with a cotton cloth to raise the shine. The Balm did its magic and the grain stood out. I set the bowl aside and turned my attention to the stem. I sanded the tooth chatter and marks with 220 grit sandpaper and started the polishing process with 400 grit wet dry sandpaper. I polished the vulcanite stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. The photo below shows the polished stem.     This nicely grained Butz Choquin Camargue 1025 Rhodesian with a vulcanite military bit stem is a great looking pipe now that it has been restored. The briar is clean and really came alive. The rich brown stains gave the grain a sense of depth with the polishing and waxing. The grain really popped. I put the vulcanite stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Butz Choquin Camargue Rhodesian is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ¾ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¾ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 50 grams/1.76 oz. The pipe will be going on the rebornpipes store soon. It will be in the section on French Pipe Makes if you would like to add it to your collection.Thanks for reading this blog and my reflections on the pipe while I worked on it. There are many more to come!

This Beat up Yves St. Claude Interlude 96 Pocket Pipe Needs an Interlude

Leave a reply

Blog by Steve Laug

The next pipe on the work table came to us from a fellow in Brazil, Indiana, USA earlier this year. It is a small pocket pipe with flat sides and an oval shank. There is some nice grain on the bowl and there is carved pattern on the back side of the bowl. The rim top is pretty beat up and has some ground in grime and lava build up. The inner edge of the rim is in rough shape and there is damage and burn marks on the outer edge as well. The finish on the bowl is very worn and dirty but there is still something intriguing about the pipe even with the grime on the surface of the briar. There is a large shrunken fill on the left side of the heel of the bowl. This pipe is stamped on the topside of the shank and reads Yves St. Claude [over] Interlude. On the underside of shank it has the shape number 96 followed by the Made in France circular COM stamp. There was a stylized YSC stamped on the top of the oval saddle stem. The pipe is heavily smoked with a moderate cake in the bowl that has been poorly reamed. There were some tooth marks and chatter on both sides of the stem near the button. The pipe is in a condition that is a challenge to bring back to life. Jeff took photos of the pipe before he started his cleanup. He took photos of the rim top to show the condition of the top and edges of the bowl. It is a heavily smoked and well worn older pipe that must have been someone’s favourite. The stem had tooth marks and chatter on both sides ahead of the button.He took photos of the sides and heel of the bowl to show the interesting grain around the bowl and the condition of the pipe. He also captured the carving on the back of the bowl. It is a unique looking pipe. He took a photo of the shrunken fill on the left side of the heel of the bowl. It was a large fill that had chipped and left a pit.He took photos of the stamping on the sides of the shank. It is clear and readable as noted above. He also took photos of the YSC stamp on the left side and Hand Cut on the right side of the taper stem.   I turned first to a blog I had written on the restoration of previous YSC pipe that I received (https://rebornpipes.com/2020/04/23/next-on-the-table-an-yves-st-claude-marbre-75-bulldog/).

In the previous blog that I cited above I had found several references to Yves Grenard, trained in Comoy’s England factory, purchasing the Chacom plant in St. Claude. He managed the factory and it passed on to his son afterward. The shape of this Yves St. Claude pipe makes me believe that it may have been made by Chacom in France with the stamping bearing Yves name.

I turned back to Pipephil’s site to have a look at what was listed there and did a screen capture of the section (http://www.pipephil.eu/logos/en/logo-y.html).I turned to Pipedia and in the listing of French Brands and Maker I found a connection of the brand to Chapuis-Comoy and that the YSC brand was made primarily for Tinder Box (https://pipedia.org/wiki/French_Pipe_Brands_%26_Makers_U_-_Z). I followed that up by turning to the Chapuis-Comoy article from Pipedia (https://pipedia.org/wiki/Chapuis-Comoy).

French factory, in St. Claude. It began with Francois Comoy who, in 1825, was making pipes in boxwood and other types, as well as in clay, for the armies of Napoleon. In 1856, the Comoy factory was the first to produce briar bowls at St. Claude. In 1870, Francois’s grandson, Henri Comoy (1850-1924) was taken prisoner in Switzerland whilst serving in the French army during the Franco-Prussian war, where he found his cousins, the Chapuis. This meeting produced the idea of an association, which only became a reality in 1922, with the creation of Chapuis-Comoy. After Henri’s death, his sons Paul and Adrien, took over the company with the support of their cousins, Emile and Louis Chapuis Sr., and in 1928 they created the Chacom brand.

In 1932, due to the economic crisis at Saint-Claude, the factory merged with La Bruyère, adopting that name, and becoming one of the biggest pipe companies in the world, with 450 workers. Louis Chapuis Jr., joined the company in 1938 and Pierre Comoy in 1947. The name Chapuis-Comoy returned in 1957 (125 workers), due to the success of the Chacom brand in France. In 1971, the London factory (see Comoy’s) became independent, and Yves Grenard, second cousin to Pierre, took over Saint-Claude, and is still running it. Between 1987 and 2001, the factory, which employed over 40 people, joined the Cuty-Fort Enterprises SA holding and, in 1994, included the Ropp brand it its catalog.

Reminded about the Chacom connection for the YSC brand it was now time to turn to the pipe itself and do my part of the work. As usual Jeff had done a thorough cleanup on the pipe. He reamed the bowl with a PipNet pipe reamer and followed up with a Savinelli Fitsall pipe knife to remove the cake. He scrubbed out the mortise and the airway in the shank and the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the bowl, rim, shank and stem with a tooth brush and Murphy’s Oil Soap to remove the oils and tars on the rim and the grime on the finish of the bowl. He rinsed it under running water. One of the benefits of this scrub is that it also tends to lift some of the scratches and nicks in the surface of the briar. He dried it off with a soft cloth. He cleaned the internals and externals of the stem with alcohol, pipe cleaners and cotton swabs. He soaked the stem in Briarville’s Pipe Stem Deoxidizer and rinsed it off with warm water and cleaned out the airway in the stem with alcohol. Other than the damaged rim top and edges the pipe looked good. Strangely, I did not notice I had put the stem on upside down until I looked through these pictures. I have the YSC stamp on the underside of the stem rather than the top! Oops. I will fix that.I took a photo of the rim top and stem to show the condition (though it is a little blurry it is clear enough to see the damage). The edges of the bowl are in rough condition. The oval vulcanite saddle stem had tooth chatter and marks on both sides ahead of the button and on the edges. The stamping on the sides of the shank is faint but readable as noted above.       I removed the stem from the shank and took a photo of the pipe to give a sense of the whole. It is unique looking pipe that is carved with a notch for the thumb of either hand when it is wrapped around the bowl. I started working on the pipe by topping the damaged rim top on a topping board with 180 grit wet dry sandpaper. I wanted to minimize the damage to the rim top and the inner and outer edges as much as possible. I used a folded piece of 180 grit sandpaper to clean up the inner edge and give it a slight bevel. I repaired the flaw on the left side of the heel of the bowl with briar dust and super glue. Once it dried I sanded it smooth with 220 grit sandpaper to blend it into the surrounding briar.  I sanded it with micromesh sanding pads, wet sanding with 1500-12000 grit sanding pads and wiping it down with an alcohol dampened pad after each sanding pad. I rubbed the bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the bowl sides and shank with my fingertips to clean, enliven and protect the briar. I let the balm sit for a little while and then buffed with a cotton cloth to raise the shine. The Balm did its magic and the grain stood out.   I set the bowl aside and worked on the stem. I touched up the YSC stamp on the top of the saddle stem with Antique Gold Rub’n Buff working it into the stamp with a tooth pick. I buffed it off with a soft cloth.   I polished the vulcanite stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. The photo below shows the polished stem. This nice smooth finished Yves St. Claude Interlude 96 Pocket Pipe with a vulcanite saddle stem is a great looking pipe. The rich medium brown finish and the black stem work really well together. The briar is clean and really came alive. The rich medium brown stain gave the grain a sense of depth with the polishing and waxing. The grain really popped. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished YSC Interlude Pocket Pipe is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 4 ½ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches wide x 1 ½ inches long, Chamber diameter: ¾ of an inch. The weight of the pipe is 36 grams/1.27 ounces. If you are interested in adding it to your collection let me know. I will be adding to the French Pipe Makers section of the rebornpipes store shortly. Thanks for reading this blog and my reflections on the pipe while I worked on it.

What an Odd Little Butz Choquin Bosco 1040 Snub Nose Bent Billiard

Leave a reply

Blog by Steve Laug

The next pipe on the work table came to us from an antique mall in Logan, Utah, USA early in 2020. It is a unique snub nose bent Billiard with cross grain and birdseye grain and has a short saddle vulcanite stem. The bowl has a rich medium brown colour combination that highlights grain. The pipe has some grime ground into the surface of the briar. It really has some stunning grain on the bowl and shank. This pipe is stamped on the sides of the shank. On the left it reads Butz Choquin [over] Bosco. On the right it read St. Claude [over] France [over] the shape number 1040. There is a moderate cake in the bowl and a thick overflow of lava on the rim top and edges. The rim top looks good but it is hard to be certain with the lava coat. The saddle stem has BC stamped on the left side. There is also a strange metal pin in the top below the saddle stem. It had been filled in with a clear/golden epoxy that was chipped and broken. I have no idea if this is original or some previous pipe owner’s addition. There were some tooth marks and chatter on both sides of the vulcanite stem near the button. The pipe looks to be in good condition under the grime. Jeff took photos of the pipe before he started his cleanup. He took photos of the rim top to show the thick cake and the thick lava coat. It is hard to know what the condition of the rim top and edges is like under that thick lava. It is an incredibly dirty pipe but obviously one that was a great smoker. The stem is another strange part of the pipe. It is short and stubby but is original. It has that odd pin and gold epoxy on the top of the stem. The stem also has tooth marks and chatter on both sides ahead of the button. The stem was made for a 6mm filter.He took photos of the sides and heel of the bowl to show the beautiful grain around the bowl and the condition of the pipe. You can see the grime ground into the surface of the briar as well as the sandpits. He took a photo of the stamping on the sides of the shank. It is clear and readable as noted above. He also captured the BC stamp on the saddle stem. I wondered about the name of the pipe and did a quick Google search on the word as a name. the search turned up the following:

Italian: topographic name for someone living or working in a wood, from Late Latin boscus ‘shrub’, ‘undergrowth’ (of Gallic or Germanic origin), or a habitational name from a place named with this word.

It turns out to be a fitting name for a pipe made of the shrub Briar! I like the connection but I am not certain that it is what is referred to… but it could be right?

I turned then to Pipephil’s site to look at the Butz Choquin write up there and see if I could learn anything about the line (http://www.pipephil.eu/logos/en/logo-butzchoquin.html). There was a nothing listed for the Bosco pipe but there was a short history of the brand that is worth a read.

I looked up the Parker brand on Pipedia to see if I could find the Butz-Choquin Bosco Line (https://pipedia.org/wiki/Butz-Choquin). There was nothing that tied directly to the line I am working on. There is a detailed history of the brand there that is a good read.

It was time to work on the pipe. As usual Jeff had done a thorough cleanup on the pipe. He reamed the bowl with a PipNet pipe reamer and followed up with a Savinelli Fitsall pipe knife to remove the cake. He scrubbed out the mortise and the airway in the shank and the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the bowl, rim, shank and stem with a tooth brush and Murphy’s Oil Soap to remove the oils and tars on the rim and the grime on the finish of the bowl. He rinsed it under running water. One of the benefits of this scrub is that it also tends to lift some of the scratches and nicks in the surface of the briar. He dried it off with a soft cloth. He cleaned the internals and externals of the stem with alcohol, pipe cleaners and cotton swabs. He soaked the stem in Briarville’s Pipe Stem Deoxidizer and rinsed it off with warm water and cleaned out the airway in the stem with alcohol. This odd little pipe actually was quite stunning! I took a photo of the rim top and stem to show the condition. The rim top looked very good. The rim top and the inner edge of the bowl had darkening and the varnish coat had peeled. The vulcanite saddle stem had light tooth chatter and marks on both sides ahead of the button and on the button edges.I removed the stem and the extension from the shank and took a photo of the pipe to give a sense of the whole. It is a nice Straight Grain Billiard that should clean up very well.   I polished the briar with micromesh sanding pads – wet sanding with 1500-12000 grit pads and wiped down the bowl after each sanding pad.    I rubbed the bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the bowl sides and shank with my fingertips to clean, enliven and protect the briar. I let the balm sit for a little while and then buffed with a cotton cloth to raise the shine. The Balm did its magic and the grain stood out.     I set the bowl aside and turned my attention to the stem. I filled in the tooth marks near the button and the pitting around the pin in the top of the stem. Once the repairs cured I used a small file to flatten out the repairs and start to blend them into the stem surface. I sanded the repairs with 220 grit sandpaper and started the polishing process with 400 grit wet dry sandpaper. I used Rub’n Buff Antique Gold to fill in the BC stamp on the left side of the saddle stem. I rubbed it on with a cotton swab and buffed it off with a cotton pad. The stamp is faint but readable.   I polished the vulcanite stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. The photo below shows the polished stem.     While working on the stem I decided to see what would fit in the wide open tenon. It was obviously drilled for a 6mm filter. I did not have any, but I did have a Savinelli 6mm Balsa wood filter. Some how a pipe with the name Bosco (shrub/wood) just matched that style of filter. I fit it in place. Then it dawned on me that the pin on the top of the stem was made to keep the filter from going to deep in the stem. It worked well.   This nicely grained Butz Choquin Bosco 1040 Bent Billiard Nosewarmer with a vulcanite saddle stem is a great looking pipe now that it has been restored. The briar is clean and really came alive. The rich brown stains gave the grain a sense of depth with the polishing and waxing. The grain really popped. I put the vulcanite stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Short Butz Choquin Bent Billiard is a beauty and feels great in the hand and looks very good. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 4 ¼ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 41grams/1.45oz. The pipe will be going on the rebornpipes store soon. It will be in the section on French Pipe Makes if you would like to add it to your collection.Thanks for reading this blog and my reflections on the pipe while I worked on it. There are many more to come!