Tag Archives: removing tooth marks

The last of the threesome – an older Comoy’ Grand Slam 126 Pot

Leave a reply

By Steve Laug

The next pipe on the table is one of three that was dropped off at my house on Saturday for clean up and restoration. Robert stopped by with a bag of pipes that his brother had picked up for him while hunting for pipes in New York. The lot included a Medico Ventilator, a couple of Grabows, a small salesman’s pipe, a Smokemaster, an unmarked sandblast pot, an Oom Paul Natural Grain Algerian Briar France, a Comoy’s Grand Slam Patent Pot, and an interesting KBB Yello-Bole Zulu/Yacht with a unique biteproof stem. We went through the lot and chose the three pipes that he wanted to work on. I have circled them in the photo below.All I had left to work on was the Comoy’s and I was looking forward to it. The finish was very dirty but the amazing grain could not be hidden by the grime. The pipe is stamped on the left side and reads Comoy’s [over] Grand Slam [over] Patent. On the right side of the shank it is stamped US Pat. [over] 2001612 followed by the shape number 126. On the underside of the shank was the Made in England in a Rugby ball shape. Above that the number *2 was stamped which gave the size of the leather washers on the metal apparatus in the shank. The bowl had a moderate cake on the walls with a light lava overflow and darkening on the rim top and edges. The finish was dirty but there was no varnish coat on the pipe. It had a vulcanite push stem with the Grand Slam metal apparatus in the tenon. The stem was oxidized but otherwise quite clean. The top of the taper stem had an inset white line – white on each end of the line and a turquoise space between them. I took some photos of the pipe before I started my clean up work. The photos of the rim top show the cake in the bowl, the light lava build up and the darkening on the bevelled inner edge of the bowl. The photos of the stem show the deep oxidation on both sides. It is an older narrow style straight stem with no flair at the button end.The next series of photos show the stamping on the shank sides. The stamping is clear and readable as noted above. I removed the stem from the shank and took a photo of the parts of the pipe. There Comoy’s Grand Slam apparatus is shown in the third photo. The pipe looks quite beautiful. I have worked on quite a few Comoy’s Grand Slam pipes in the past and knew they had a unique stinger apparatus. Some came with and some without the leather washers in place on the apparatus. Some of them have been Patent pipes like this one. I turned to a link to one of the Grand Slams I had restored and reread it (https://rebornpipes.com/2020/09/05/a-tale-of-the-rebirth-of-3-pipes-pipe-3-a-comoys-grand-slam-pipe-484b-billiard/). Parts of the history I included there were really helpful. I have included some of the information here as well as some new information.

Pipephil’s site had a section on the Comoy’s Grand Slam Pipe and the information was quite helpful (http://www.pipephil.eu/logos/en/logo-comoy.html). I have included a screen capture of the section on the Grand Slam. The pipe I am working on now is like the first one in the screen capture below. It has the original stem with the single bar logo on the stem top like the one in the first photo below. The stamping on the shank is the same as the one I am working on. The US Patent Number in the photo is identical to the one in hand.From that read I learned that because the stem has a Bar Logo – white, turquoise, white it is an older pipe made between 1933 and 1945. After WWII the bar logo was replaced with the 3 part inlaid C. The mark on the underside above the COM stamp is a “2” indicating the size of the leather washer on the end of the metal stinger.

There was a box in the first photo to the right of the photo that took me to another page with the patent information (http://www.pipephil.eu/logos/en/infos/comoy1.html) and some advertising and photos that made the apparatus and washers very clear. I am including those below.

I have included a copy of the Comoy’s 1936 Ad that describes the Grand Slam and the Patented stinger apparatus. The metal filter system forces the air stream through a go-between space before entering the stem and the smokers mouth.I also included the drawings from the original patent document that were on the site. They have been re-colored for Pipephil to illustrate the intention. Numbers 8 and 6 are also shown.

8 (red): hollow screw

6 (yellow): leather washerI also am including the Patent information for the US and Canada. It also includes the name of the inventor Marcel CH Jacquemin.

Patent Number 2001612 (USA)

Patent Number 341422 (Canada)

Inventor: Marcel C. H. Jacquemin (see also: Newhaven)

System patent granted in 1933 (Montreal, Canada)

I have also included some photos of the pipe taken apart so you can see the clean and unused apparatus and the stamping of the leather washer size below.Grand Slam pipes have a “*” followed by a number on the underside (*5 in the picture opposite).

The number refers to the size of the leather washer that fits on the end of the stinger.

The pipe I am working on has a *2 that tells me the leather washer size on the pipe is a size 2.

I turned to the article on Pipedia about dating Comoy’s pipes but the style of the stamping (https://pipedia.org/index.php?title=Comoy%27s_Dating_Guide#1917_to_the_end_of_the_1930.27s_.28at_least_1938.29). I have included the section and the screen capture below that date this pipe to the 1950s. I have highlighted the pertinent portions in red.

Now the Comoy’s stamp can be found in three variants in the 1950s

  1. A simple block-letter style without serifs but with the C larger than the other letters and the apostrophe before the “S”.
  2. A return to the slightly more fancy block letters with serifs and the apostrophe. (It seems that some grades carried different stamps, or at least that the stamping changed in different years for some grades.)
  3. A simple block-letter style without serifs and without the apostrophe and with the “C” the same size as the rest of the letters. This stamp was probably not used very long.
  4. A simple block-letter style without serifs but with the apostrophe before the “S” and with the “C” the same size as the rest of the letters.

Made in London England

Appears in two versions. This is again stamped in a circle with “MADE” at the top, “IN” in the middle, and “LONDON” at the bottom, with “ENGLAND” in a straight line beneath. It can be assumed that this stamp was first used in the export drive in the early 1950s. On a Bulldog Sandblast from the early 50s the Comoy name no. 2 above was used together with “MADE IN LONDON” over “ENGLAND”. There are no known examples of pre-WW II Comoy’s stamped in this way. The second version is the same as above but in a “rugby ball ” shape. This shape is verified on Comoy´s “Extraordinaire” pipes.

That article gave me some helpful information regarding the pipe that I was working on. I knew that the stamping and logos identified the pipe as having been made in following WW2 and from what I can see from the above information it is a 1950s era pipe.

Now to work on the pipe itself. I started by reaming it with a PipNet Pipe Reamer. The bowl was large enough that I used the second and third cutting heads. I took the cake back to bare briar. I cleaned up the reaming with a Savinelli Fitsall Pipe Knife. I also scraped off the lava build up on the rim top with the knife. I sanded the bowl walls with 220 grit sandpaper wrapped around a dowel. I took it back to smooth walls. The walls looked very good with no sign of checking or burning. I worked on the rim top with spit and a cotton pad to remove the lava and darkening around the rim top and the bevelled edge of the bowl. It cleaned up quite nicely.I cleaned out the shank, mortise and the airway in the bowl with pipe cleaners (both smooth and bristle), cotton swabs and 99% isopropyl alcohol. I was quite surprised how clean the shank was. While I worked on the bowl and shank I let the stem and apparatus sit in a bath of alcohol to clean up the tars and oils and try to loosen it in the tenon. I removed it and cleaned out the airway in the stem and the stinger with pipe cleaners and alcohol. I wiped down the stinger with a cotton pad and alcohol to remove the tars. The pipe looks much cleaner and also smells fresh now! I set the stem aside and turned my attention to the bowl. I scrubbed the exterior of the bowl with undiluted Murphy’s Oil Soap and a tooth brush. With the grime removed from the briar – both the top and sides of the bowl, it is truly a beautiful piece of briar. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped it down after each sanding pad with a damp cloth to remove the sanding debris on the surface. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the surface of the briar with my fingertips to clean, enliven and protect it. I let the balm sit for a little while and then buffed with a cotton cloth and shoe brush to raise the shine. I set the bowl aside and turned my attention to the stem. I polished the stem with 320-3500 grit sanding pads. I wiped the stem down after each sanding pad with an Obsidian Oil impregnated cloth. It removes the dust and also gives the sanding pads some bite. By the final pad it was looking quite good. Following my usual process in restoration I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it further with Before & After Stem Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil and set it aside to absorb the oil. I rubbed down the leather washer at the end of the aluminum stinger apparatus with a coat of Vaseline. I worked it into the leather and repeated the process. The Comoy’s Grand Slam Patent 126 Pot is finished other than the final waxing and buffing. I polished the bowl and stem with Blue Diamond to polish out the remaining small scratches and gave it several coats of carnauba. I buffed the pipe with a clean buffing pad on the buffer to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The finished pipe is shown in the photos below. The dimensions are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: 1 inch. The weight of the pipe is 39 grams/1.38 ounces. It is a great looking pipe now that it is restored. It feels great in the hand and as it warms up it as smoked it should be even better. This is the last of Robert’s pipes that I needed to work on so they are ready for him to pick them up. I look forward to hearing what he thinks of it once he has them in hand. If the condition was any indicator it is a good smoker. Thanks for walking through the restoration with me as I worked over this Comoy’s Grand Slam 126 Pot.

Restoring a French Made Oom Paul Natural Grain Algerian Briar

Leave a reply

By Steve Laug

The next pipe on the table is one of three that was dropped off at my house on Saturday for clean up and restoration. Robert stopped by with a bag of pipes that his brother had picked up for him while hunting for pipes in New York. The lot included a Medico Ventilator, a couple of Grabows, a small salesman’s pipe, a Smokemaster, an unmarked sandblast pot, an Oom Paul Natural Grain Algerian Briar France, a Comoy’s Grand Slam Patent Pot, and an interesting KBB Yello-Bole Zulu/Yacht with a unique biteproof stem. We went through the lot and chose the three pipes that he wanted to work on. I have circled them in the photo below.I chose to work on the Oom Paul Natural Grain next. The finish was very dirty but the amazing grain stood out around the bowl and the shank. The pipe is stamped on the left side and reads Oom Paul [over] Natural Grain. On the right side of the shank it is stamped Algerians Briar [over] France. The bowl had a moderate cake with some light lava overflow and darkening on the rim top. The finish was dirty but there was no varnish coat on the pipe. It had a vulcanite push stem with a tiny pointed stinger apparatus in the tenon. The stem was oxidized and it was rough to touch. There were very light bite marks on the surface ahead of the button. I took some photos of the pipe before I started my clean up work. The photos of the rim top show the cake in the bowl, the light lava build up and the darkening on the inner edge of the bowl. The photos of the stem show the deep oxidation on both sides. It is an older narrow style straight stem with no flair at the button end.The next series of photos show the stamping on the shank sides.The stamping is clear and readable as noted above. I removed the stem from the shank and took a photo of the parts of the pipe. There is a small stinger in the tenon in the first photo. I removed it in the second. The pipe looks quite beautiful. Before I started my work on the pipe I decided to do a bit of research on the brand. There was nothing listed on either Pipephil’s site of the Pipedia site. I looked under French makers for both Natural Grain and for Oom Paul. There was no information. The style of the stamp, the shape and just the feel of the pipe remind me of a French made Comoy’s but there were no tangible links to that brand that I could fined online.

Now to work on the pipe itself. I started by reaming it with a PipNet Pipe Reamer. The bowl was large enough that I used the second and third cutting heads. I took the cake back to bare briar. I cleaned up the reaming with a Savinelli Fitsall Pipe Knife. I also scraped off the lava build up on the rim top with the knife. I sanded the bowl walls with 220 grit sandpaper wrapped around a dowel. I took it back to smooth walls. The walls looked very good with no sign of checking or burning. I cleaned out the shank, mortise and the airway in the bowl and the stem with pipe cleaners (both smooth and bristle), cotton swabs and 99% isopropyl alcohol. I was quite surprised how clean both the shank and the stem were. It did not take too much to clean them out. The pipe smells clean and fresh now! I set the stem aside and turned my attention to the bowl. I scrubbed the exterior of the bowl with undiluted Murphy’s Oil Soap and a tooth brush. With the grime removed from the briar – both the top and sides of the bowl it is truly a beautiful piece of briar. I sanded the bowl with sanding pads – 320-3500 grit pads. I dry sanded it and wiped it down with a damp cloth after each pad. I was able to remove all of the shiny coat and the bowl began to take on a natural shine. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped it down after each sanding pad with a damp cloth to remove the sanding debris on the surface. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the surface of the briar with my fingertips to clean, enliven and protect it. I let the balm sit for a little while and then buffed with a cotton cloth and shoe brush to raise the shine. I set the bowl aside and turned my attention to the stem. I polished the stem with 320-3500 grit sanding pads. I wiped the stem down after each sanding pad with an Obsidian Oil impregnated cloth. It removes the dust and also gives the sanding pads some bite. By the final pad it was looking quite good. Following my usual process in restoration I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it further with Before & After Stem Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil and set it aside to absorb the oil. The Oom Paul Natural Grain Algerian Briar France is finished other than the final waxing and buffing. I polished the bowl and stem with Blue Diamond to polish out the remaining small scratches and gave it several coats of carnauba. I buffed the pipe with a clean buffing pad on the buffer to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The finished pipe is shown in the photos below. The dimensions are Length: 5 ½ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 62 grams/2.19 ounces. It is a great looking pipe now that it is restored. It feels great in the hand and as it warms up it as smoked it should be even better. I have one more of Robert’s pipes that I need to work on and then will call him to pick them up. I look forward to hearing what he thinks of it once he has them in hand. If the condition was any indicator it is a good smoker. Thanks for walking through the restoration with me as I worked over this Oom Paul Natural Grain French Made.

KBB Yello-Bole Stembiter Cured with Real Honey 4261B Yacht

Leave a reply

By Steve Laug

The next pipe on the table is one of three that was dropped off at my house on Saturday for clean up and restoration. Robert stopped by with a bag of pipes that his brother had picked up for him while hunting for pipes in New York. The lot included a Medico Ventilator, a couple of Grabows, a small salesman’s pipe, a Smokemaster, an unmarked sandblast pot, an Oom Paul Natural Grain Algerian Briar France, a Comoy’s Grand Slam Patent Pot, and an interesting KBB Yello-Bole Zulu/Yacht with a unique biteproof stem. We went through the lot and chose the three pipes that he wanted to work on. I have circled them in the photo below.I chose to work on the Yello-Bole Zulu/Yacht first as it was unique and just called out to me. The finish was very dirty but the grain was quite beautiful around the bowl and the shank. The pipe is stamped on the left side and reads KBB in a cloverleaf next to the bowl/shank union. To the right of that it is stamped Stembiter [over] Yello-Bole [over] Cured with Real Honey. On the right side of the shank it is stamped with the shape number 4261B. The bowl had a thick cake but underneath there was remnants of the yellow Honey Coating that Yello-Bole draw their name from. The finish was dirty and had some peeling varnish around the bowl. The base of the bowl and shank had been flattened to make the pipe a sitter. It had a vulcanite push stem with the classic Yello-Bole Spade style stinger apparatus in the tenon. The stem was oxidized. The aluminum spacer on the shank end of the stem was oxidized and pitted. It was rough to touch. There were very light bite marks on the surface ahead of the button. The Stembiter system was unique on the stem end – a scooped out divot on both sides and then a twin bore button end. I took some photos of the pipe before I started my clean up work. The photos of the rim top show the lava build up and marks on the top and the darkening on the inner edge of the bowl. You can also see the yellow bowl coating on front side near the bottom of the bowl surrounded by the cake. The photos of the stem show the deep oxidation on both sides. They do show the yellow O logo on the stem top. The stem end shows the Stembiter system.The next series of photos show the stamping on the shank sides. The stamping is clear and readable as noted above. I removed the stem from the shank and took a photo of the parts of the pipe. It looks quite beautiful.Before I started my work on the pipe I decided to do a bit of work on the Patent Number and the shape number on the heel of the bowl. I remembered that Troy Wilburn, one of our blog writers and good friend of rebornpipes sent me a shape number list for old Kaywoodie and Yello-Bole pipes that is on the blog. I found it very useful and typed it into a chart format. Troy said that he got the data for this from the Kaywoodie Forums. I decided to post the chart on the blog for easy access. Thank you to the KW forum for the information. Here is the link to the full shape chart information that I have on the site (https://rebornpipes.com/2016/05/07/kaywoodie-yello-bole-shape-numbers/). The pipe I am working on has a push tenon, vulcanite stem as noted in the expanded Kaywoodie/YB charts on the above link. While there is not a listing for a 61 the numbers around that on the chart all include that the pipes had a vulcanite push stem. The good news is that I have the original stem.Troy also included the following information on the first two digits of the shape number. I quote in full regarding that below.

2-digit prefixes for 4-digit pipes – you might find an odd ball or a rare one that is not on the list.
From the time of the first Kaywoodie until 1938 for Kaywoodie and for Yello-Bole, Kaufmann Brothers & Bondy used a 4-digit number system (plus a letter sometimes) to identify the line and shape number. The 4-digits were not used after 1938. The first two, which we’ll call the prefix, referred to the finish and the second two, the suffix numbers referred to the shape number.

The 42B is the Yacht Freshman shape and the L identifies it as a large version of the pipe. Note also that the pipe was only made between 1936-1937 so it is an old timer.

Now to work on the pipe itself. I started by reaming it with a PipNet Pipe Reamer. The bowl was large enough that I used the second and third cutting heads. I took the cake back to bare briar. I cleaned up the reaming with a Savinelli Fitsall Pipe Knife. I also scraped off the lava build up on the rim top with the knife. I sanded the bowl walls with 220 grit sandpaper wrapped around a dowel. I took it back to smooth walls. The walls looked very good with no sign of checking or burning. I heated the spade style stinger with a lighter flame and once it heated the tars that held it in place let loose and I was able to remove it. I cleaned up the aluminum stinger with alcohol and a 320 grit sanding pad to remove the debris. I set the stinger aside and then I cleaned out the shank, mortise and the airway in the bowl and the stem with pipe cleaners (both smooth and bristle), cotton swabs and 99% isopropyl alcohol. It took a lot of cleaners but I got the grime and oils out of the shank and stem. The pipe smelled of tobacco it was much cleaner smelling than previous to that. I set the stem aside and turned my attention to the bowl. I wiped it down with some 100% acetone to remove the varnish coat and clean up the remnants of that finish around the bowl and shank. It came off quite quickly and looked nice. I touched up the spotty rim top and inner edges with a Cherry stain pen. It matched the colour of the rest of the bowl and shank. Once it was buffed and polished it would blend in perfectly.I sanded the bowl with sanding pads – 320-3500 grit pads. I dry sanded it and wiped it down with a damp cloth after each pad. I was able to remove all of the shiny coat and the bowl began to take on a natural shine. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped it down after each sanding pad with a damp cloth to remove the sanding debris on the surface. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the surface of the briar with my fingertips to clean, enliven and protect it. I let the balm sit for a little while and then buffed with a cotton cloth and shoe brush to raise the shine. I set the bowl aside and turned my attention to the stem. I wiped down the stem surface with Soft Scrub. I used cotton pads to remove the oxidation and it was amazing how much came off with the scrubbing.I cleaned out the oxidation in the Stembiter with cotton swabs and Soft Scrub. I was able to remove all of the oxidation and the stem is looking much better at this point.I polished the stem with 320-3500 grit sanding pads. I wiped the stem down after each sanding pad with an Obsidian Oil impregnated cloth. It removes the dust and also gives the sanding pads some bite. By the final pad it was looking quite good. Following my usual process in restoration I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it further with Before & After Stem Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil and set it aside to absorb the oil. The KBB Yello-Bole Stembiter Cured with Real Honey 4261B Yacht Freshman is finished other than the final waxing and buffing. I polished the bowl and stem with Blue Diamond to polish out the remaining small scratches and gave it several coats of carnauba. I buffed the pipe with a clean buffing pad on the buffer to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The finished pipe is shown in the photos below. The dimensions are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 26 grams/.92 ounces. It is a great looking pipe now that it is restored. It feels great in the hand and as it warms up it as smoked it should be even better. I have two more of Robert’s pipes that I need to work on and then will call him to pick them up. I look forward to hearing what he thinks of it once he has them in hand. If the condition was any indicator it is a good smoker. Thanks for walking through the restoration with me as I worked over this KBB Yello-Bole Stembiter Yacht Freshman.

Restoring a LJ Perretti Algerian Briar Billiard

Leave a reply

By Steve Laug

The next pipe on the table was one we purchased on 01/22/24 off eBay from a seller in Jordan, Minnesota, USA. It is large billiard that is stamped L.J. PERRETTI on the left side of the shank. On the right side it is stamped ALGERIAN BRIAR. The stamping is clear and readable. The grain is quite nice and there are no fills in the briar that are visible. It was a dirty pipe – the finish was darkened and grit and oils were ground into the outside of the bowl. The rim top had a serious cake of lava on it, heavier on the back side. There was some damage on the outer edge of the bowl at the back where it had been knocked about. The bowl had a moderate cake, heavier toward the bottom of the bowl. The stem was oxidized there were tooth marks and chatter on both sides ahead of the button. There were no marks or logo stamps on the stem. From my own work on Peretti pipes in the past I knew that this one a shop pipe from the Boston store. I did not know however when it was made or who made it. It is a well-proportioned tall billiard. It has a lot of promise. Jeff took photos of the pipe before his clean up. Jeff took closeup photos of the bowl and rim top to clearly show the condition of both. The condition matches what I described above. He also took photos of the stem to show the oxidation and tooth marks and chatter on both sides ahead of the button. Jeff took photos of the sides and heel of the bowl to give a picture of what the briar looked like. The grain around the bowl and shank is quite beautiful under the grime. The stamping on the sides of the shank is clear and readable and read as noted above. My guess is that it is probably American Made as there is no other stamping on the shank.I remembered that Dal Stanton had worked on several L.J. Peretti pipes over the years. In a blog written in 2017 wrote a great introduction to the L.J. Peretto brand (https://rebornpipes.com/2017/01/28/a-christmas-gift-in-need-of-a-stem-splice-l-j-peretti-squared-shank-billiard/). I am including portions of his write up below.

“When I began my research on L J Peretti, I was surprised to discover that it is not an Italian pipe as one might expect with such a name!  In fact, I discovered the genesis of a significant story of Americana pipe history with the establishment of the L. J. Peretti Company of Boston in 1870 (Pipedia citing: Pipes, Artisans and Trademarks, by José Manuel Lopes), the second oldest tobacco shop in the US, second only to Iwan Ries & Co. of Chicago established in 1857 (See: Link).””Going directly to L J Peretti’s website, now president, Stephen L. Willett provides this historical summary of this Boston icon (Link: http://www.ljperetti.com):

In 1870, Libero Joseph Peretti arrived in Boston from Lugano, Switzerland. Filled with an entrepreneurial spirit and a love for fine tobacco, L.J. established the “Peretti Cuban Cigar Co.” in Boston’s historic North End. In the first two decades of business, the company provided a number of contributions to the tobacco industry and began to blend “house cigars”.

1892 marks the establishment of the Peretti Cigar Factory in Park Square, Boston. For over forty years, the company employed fifty rollers who produced some of the finest cigars in New England. Not only did Peretti’s manufacture blended cigars, but they also created Clear Havana Vitolas such as the legendary La Mirendella.

L.J.’s son, Joseph, aka “The Major”, followed his father into the family business. His primary love was pipes and pipe tobacco. Among his notable accomplishments was the creation of the first “English” blend, called British, in the United States; as well as securing the exclusive import rights to Peterson pipes and Sullivan & Powell tobaccos.

After World War II the third generation Peretti’s, Robert, entered the firm. The original store had moved from the North End to the centre of Boston on Massachusetts Avenue and there were additional stores throughout the financial district of Boston. Robert became a tobacco legend in United States and throughout the world. Most of the more than eighty house blends of pipe tobacco were created by Robert Peretti. His reputation as a blender led politicians, actors, celebrities and gentlemen of all callings to seek his tobacco advice.”

Dal’s article continues with a lot more information from various sources and is worth the time to read and enjoy.

For me I turned to Pipedia (https://pipedia.org/wiki/Perettito), one of my usual sites, to see what was there. I quote:

Peretti is the brand of Robert A. Peretti, then owner of the L.J. Peretti Co., a tobacconist founded in Boston by his grandfather, L. Joseph Peretti in 1870. The first pipes made there date from the 1920s, and Robert began producing them in 1938.

The customers of this well known tobacco and pipe shop included the former British prime minister, Ramsey MacDonald, and also Bing Crosby, Basil Rathbone, Edward G. Robinson, and Walter Matthau.

L.J. Peretti Co. Established 1870…

Our own line of pipes are famous the world over for their outstanding value. The photos here represent a small sampling of our immense selection of shapes, sizes, and finishes.

Pick a price range, a shape, and a finish. We’ll pick you out a pipe that will be sure to satisfy for years to come.

The majority of our smooth pipes are natural or unfinished and will darken over time bringing out their beautiful grain naturally.

Armed with that information I turned to work on the pipe itself. Jeff had cleaned up the pipe with his usual thoroughness. He reamed the pipe with a PipNet pipe reamer and removed the rest of it with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners and shank brushes. He soaked the stem in Briarville’s Pipe Stem Deoxidizer and rinsed it off with warm water. I took photos of the pipe before I started my part of the restoration work. The rim top cleaned up really well. The rim top and inner edge of the bowl look good. There was some darkening on the inner edge and light damage on the edges. The outer edge has some damage on the backside of the bowl. It looked like it had been knocked repeatedly against a hard surface. There was also some darkening on the back of the rim top. The stem surface looked much better though there were remnants of oxidation near the shank end. Overall it looked very good with a few small tooth marks and chatter on both sides near the button. The stamping on shank sides is clear and readable. It is stamped as noted above. I removed the stem and took a photo of the pipe to give a sense of the whole. I cleaned up the inner edge of the bowl with a folded piece of 220 grit sandpaper to smooth out the damage. I then used a piece of 220 grit sandpaper and a wooden ½ sphere to give the inner edge of the bowl a light bevel and to clean up the darkening around the top and outer edge. I decided to leave the bowl outer edge in the same condition it came. I lightly smoothed out the damage on the back outer edge without changing the profile of the bowl. Once finished it looks much better even with the damage and the darkening on the edge. I sanded the rim top and the bowl and shank with 320-3500 grit sanding pads to blend in the sanding I had done on the top with sides and shank. Each pad gave it more of a shine. I wiped it down after each sanding pad with a damp cloth to remove the sanding dust and debris. I stained the rim top and lightened area on the shank end with a Cherry stain pen. It matched well. You can still see the damaged area on the back outer edge of the bowl. It looks black.I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped the bowl down with a damp cloth after each pad. By the end of the process it looked quite good. I rubbed the bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the bowl sides and shank with my fingertips. It works to clean, enliven and protect the briar. I let the balm sit for 15 minutes and buffed with a cotton cloth to raise the shine. The grain came alive. I set the bowl aside and turned my attention to the stem. I “painted” the stem surface with the flame of a Bic lighter. I was able to lift the tooth marks on both sides with the flame. It worked well enough that I sanded out the remaining marks with 220 grit sandpaper and it was smooth. I polished the stem with 320-3500 grit sanding pads. I wiped the stem down after each sanding pad with an Obsidian Oil impregnated cloth. It removes the dust and also gives the sanding pads some bite. By the final pad it was looking quite good.I polished the vulcanite stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I rubbed it down with a final coat of Obsidian Oil and let it dry. This LJ Peretti Algerian Briar Billiard is a great looking pipe now that it has been restored. The beautiful grain around the bowl is quite stunning and works well with both the shape and the polished vulcanite taper stem. The damage I left on the back outer edge of the rim top is part the pipe’s story and remains to show its travels. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the wheel and followed by buffing the pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished LJ Peretti Billiard fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ¾ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 50 grams/1.80 ounces. I will be putting it on the rebornpipes store in the American Pipemakers Section shortly. If you are interested in adding this pipe to your collection send me a message or an email. Thanks for reading this blog and my reflections on the pipe while I worked on it. I appreciate your support and time!

Restoring a Custombilt Imported Briar taper stem Rhodesian

Leave a reply

By Steve Laug

The next pipe on the table was one we purchased on 01/22/24 off eBay from a seller in Jordan, Minnesota, USA. It is a uniquely rusticated Custombilt Rhodesian that really looks good. I have worked on a lot of Custombillt rusticated pipes and enjoy working on them. The stem is a vulcanite taper stem with no markings on the sides. The pipe is stamped on a smooth panel on the left side of the shank. The left side reads Custombilt [over] Imported Briar. The stamping is clear and readable. The finish is quite dirty with grime and dust in the deep rustication where the hand held the bowl on both sides. The rim top is also dirty with darkening and also lava on the smooth surface on the edges as well. There is a thick cake in the bowl with some tobacco debris stuck on the walls and in the heel. The stem is oxidized, calcified and has tooth marks and chatter on both sides ahead of the button that are a bit deep and will need to be addressed. Jeff took some photos of the pipe before he started his clean up work. It is unique and certainly one that we are looking forward to seeing once it is cleaned up. Jeff took closeup photos of the bowl and rim top to clearly show the condition of both. The condition matches what I described above. He also took photos of the stem to show the oxidation, calcification and tooth marks and chatter on both sides ahead of the button. It also appears that the stem had a Softee Bit at some time in the past. Jeff took photos of the sides and heel of the bowl to give a picture of what the briar looked like. The rustication pattern around the bowl is instantly recognizable as done by Custombilt. The stamping on the left side of the shank is clear and readable and read as noted above.I turned to Pipephil (http://www.pipephil.eu/logos/en/logo-c8.html) to get a quick view of the brand once again. I knew that I was working with one of the older pipes and probably made by Tracy Mincer himself. He stopped making the Custom-Bilt pipes in the early 1950s. The screen capture I included below shows a brief history of the brand. I quote from the side bar in the above screen capture and have highlighted in red the pertinent part of the article.

Chunky bowls with rough carving or gouges.

Tracy Mincer stopped making Custom-Bilt pipes in the early 1950s. The trademark was successively bought by Leonard Rodgers (1953), Consolidated Cigars (1968) and Wally Frank Co. (early 1970s). The later began to produce again his version of the pipe in 1974 or 1975 at Weber pipe factory (NJ). In 1987, the pipes were made out of the Butz-Choquin factory (France) and then Mexico until the late 1990s. Currently (2010), the Custombilt name is owned by Tobacalera of Spain which is part of Altadis.

It is generally admitted (but not proved) pipes stamped “Custom – Bilt” (with the hyphen) are from the Mincer era. The name might have changed from Custom-Bilt to Custombilt (without the hyphen) in 1946.

I turned to Pipedia and found the following advertisement for the Custombilt line that I am working on (https://pipedia.org/wiki/File:Custombilt_Shapes.jpg). The logo on the advertisement is the same and the shape I have circled in red in the advert below is the same shape number as the one that I am working on.  The majority of the information on the rest of the site was two book reviews of the Custom-Bilt Story by Bill Unger. I did a screen capture of the stamping that matched the stamping on the pipe that I am working on. The stamping on the one I have might be example of Stamp #2 of the Wally Frank Era pipes (shown in the screen capture below). This stamp has the top arch of “C” extend to the top of “t”. The bottom arch of the “C” also curves into the leg of the “u” as in a cursive signature. I have also included the information on Stamp 3 as it mentions two stamps from this Wally Frank Era.In the early 1970s, Wally Frank Co. bought the Custombilt trademark and began to produce their version of the pipe in 1974 or 1975. Hollco Rohr owned the Weber pipe factory, located in New Jersey, and produced the Custombilt pipes there.

Armed with that information I turned to work on the pipe itself.  Jeff had cleaned up the pipe with his usual penchant for thoroughness. He reamed the pipe with a PipNet pipe reamer and removed the rest of it with a Savinelli Fitsall Pipe Knife.  He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. I took photos of the pipe before I started my part of the restoration work. The rim top cleaned up really well. The rim top and outer edge of the bowl look very good. The inner edge has some damage on the front of the bowl. The stem surface was rough but the oxidation and calcification was gone. Overall it looked very good with a few small tooth marks and chatter on both sides near the button. The stamping on top left of the shank is clear and readable. It is stamped as noted above. I removed the stem and took a photo of the pipe to give a sense of the whole. The wide saddle stem is nice and the photo shows the step down tenon.I cleaned up the inner edge of the bowl with a folded piece of 220 grit sandpaper to smooth out the damage. Once I had smoothed out the edge the bowl was ready. I polished the smooth briar around outside of the bowl and the rim top with micromesh sanding pads. I sanded it with 1500-12000 grit pads and wiped the bowl down with a damp cloth to remove the sanding dust. I rubbed the bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the bowl sides and shank with my fingertips and a horsehair shoe brush to get it into the rings and rustication. It works to clean, enliven and protect the briar. I let the balm sit for 15 minutes and buffed with a cotton cloth to raise the shine. The grain and the rustication came alive. I set the bowl aside and turned my attention to the stem. I polished the roughness, scratch marks and smoothed the stem with 320-3500 grit sanding pads. I wiped the stem down after each sanding pad with an Obsidian Oil impregnated cloth. It removes the dust and also gives the sanding pads some bite. By the final pad it was looking quite good.I polished the vulcanite stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I rubbed it down with a final coat of Obsidian Oil and let it dry. This Custombilt Imported Briar Bent Rhodesian is a great looking pipe now that it has been restored. The style of rustication that is used around the bowl is quite beautiful and works well with both the shape and the polished vulcanite taper stem. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax on the wheel and followed by buffing the pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Custombilt Rhodesian fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ¾ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¾ inches, Chamber diameter: 7/8 of an inch. The weight of the pipe is 47 grams/1.66 ounces. I will be putting it on the rebornpipes store in the American Pipemakers Section shortly. If you are interested in adding this pipe to your collection send me a message or an email. Thanks for reading this blog and my reflections on the pipe while I worked on it. I appreciate your support and time!

A Unique Jobey Rusticated Florentine 360 Diamond Shank Billiard with a Tortoise Shell Stem

Leave a reply

By Steve Laug

The next pipe on the table was one we purchased on 01/22/24 off eBay from a seller in Jordan, Minnesota, USA. It is a uniquely rusticated Jobey that I have never seen before. I have worked on a lot of Jobey rusticated pipes but this is a unique one. It has almost a tree bark rustication on the higher parts and the deep areas are carved like leaves. The stem is a saddle stem that is tortoise shell amber acrylic with a Jobey brass oval inlaid on the left side of the stem. The pipe is stamped on smooth panels on the left and right top sides of the diamond shank. The left side reads Jobey in script [over] Florentine. The right side has the shape number 360 stamped. Both are clear and readable. The finish is quite dirty with darkening in the deep rustication in spots where the hand held the bowl on both sides. It looks like burn marks but I don’t believe that they are. The rim top is also dirty with darkening and also lava in the rustication on the edges as well. There is a thick cake in the bowl with some tobacco debris stuck on the walls and in the heel. The stem has tooth marks and chatter on both sides ahead of the button that are a bit deep and will need to be addressed. The tenon is the Jobey Link System as you will see in the photos. Jeff took some photos of the pipe before he started his clean up work. It is unique and certainly one that we are looking forward to seeing once it is cleaned up. Jeff took closeup photos of the bowl and rim top to clearly show the condition of both. The match what I described above. He also took photos of the stem to show the tooth marks and chatter on both sides ahead of the button. He took photos of the finish around the sides of the bowl and the heel. You can see the tree bark rustication on the high parts and an almost leaf like pattern in the lower spots. It is a unique finish that is hard to clean but well worth the effort. The next photos of the stamping on the smooth panels on the sides of the shank show that it is clear and readable as noted above. The third photo shows the Jobey brass logo on the left topside of the saddle stem. Now it was time to look at it up close and personal. Jeff had removed the cake and the lava on the rim top. He had reamed the bowl with a PipNet Pipe Reamer and cleaned up the remnants with a Savinelli Fitsall Pipe Knife. He took the cake back to bare briar so we could check the walls for damage. He scrubbed the exterior of the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime on the bowl and rim and was able to remove the lava and dirt. He cleaned out the interior of the bowl and shank with shank brushes, pipe cleaners, cotton swabs and alcohol until they came out clean. He cleaned the stem with Soft Scrub to remove the grime on the exterior. He cleaned out the airway with alcohol, cotton swabs and pipe cleaners. I took some photos of the pipe before I started my work on it today. I took a close up photo of the cleaned up rim top. The rim top and the inner edge look good. The bowl is clean and the walls are undamaged. There was still some darkening in the rustication but it was much better. The stem looks good with some tooth chatter and marks along the top and underside ahead of the button.I took photos of the stamping on the shank sides. It is clear and readable as noted above. I took the stem off the pipe and took a photo. The diamond shank billiard is an attractive looking pipe with nice lines. The saddle stem shows tooth damage on the top and undersides of the stem. I went over the rustication with a brass bristle wire brush to knock off any of the darkening on the grooves of the rim top and on the spots on both sides. It looked better. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the surface of the briar with my fingertips and with a shoe brush to get deep in the rustication where it works to clean, restore and preserve the briar. I let it do its magic for 15 minutes then buffed it off with a cotton cloth. The pipe looks incredibly good at this point in the process. I filled in the deep tooth marks ahead of the button on the top and underside of the stem with clear CA glue. I like this particular glue (KM Tools) as it is transparent and the colour underneath the repair comes through. It is also not brittle like other glues can be once it cures. I sanded the cured repairs flat with a folded piece of 220 grit sandpaper and the tooth marks and dents are taken care of. I started polishing out the scratch marks and smoothing the repairs with 320-3500 grit sanding pads. I wiped the stem down after each sanding pad with an Obsidian Oil impregnated cloth. It removes the dust and also gives the sanding pads some bite. By the final pad it was looking quite good. The tooth marks and dents were invisible.Following my usual process in restoration I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it further with Before & After Stem Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil and set it aside to absorb the oil. The Jobey Florentine 360 Diamond Shank Billiard is finished other than the final waxing and buffing. I polished the stem with Blue Diamond to polish out the remaining small scratches and gave it several coats of carnauba. I polished the bowl and shank with Conservator’s Wax and buffed it with a shoe brush. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The finished pipe is shown in the photos below. The dimensions are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 43 grams/1.48 ounces. I will be adding it to the rebornpipes store shortly in the American Pipemakers section. If you are interested in adding it to your collection email me at slaug@uniserve.com or send me a message on Facebook. Thanks for walking through the restoration with me as I worked over this uniquely rusticated Jobey Florentine Billiard.

Cleaning up another one of my GBD 9438 restorations from many years ago

Leave a reply

by Steve Laug

I have always liked the GBD 9438 shaped pipe and this one was one that I picked up many years ago when I first started working on pipes. I found it at an antique shop. It was in the early days when I picked up most every pipe I found. I believe that like others I found in the early days this pipe cost me about $6CDN. Just remembering that reminds me how much things have changed over the years. It became a favourite shape of mine and over the years I have purchased many more 9438 pipes made by GBD for their main and their seconds lines such as Irwin and Dr. Plumb. I have added them to my collection. Here is a link to a blog I did on my collection back in 2013 (https://rebornpipes.com/2013/12/12/my-gbd-9438-saddle-stems-and-tapered-stem-rhodesians/). I have 12 – some were in rough shape and others not so bad. I have been sorting through my pipe collection and thinning out pipes that I am willing to part with. I have sold many already and others are currently on the store. For the most part these pipes have been early restorations and all needed a bit of work to bring them up to my current standard. I have set aside three 9438 pipes that I decided to rework. This is the third of them. It is one I restored twice in 2012 (https://rebornpipes.com/2012/09/15/a-beatup-gbd-9438-given-a-new-look/, https://rebornpipes.com/2012/09/14/irwin-943810-by-gbd-a-makeover/). It is one that I did a lot of work on at that time – both refinishing and restoring. It was a real mess that picked up off eBay. The stamping is very faint on the shank sides. It is stamped on the left side and it looked like there was a faint brand name Irwin (maybe) [over] London Made (faint but still readable with a lens). On the right side it is stamped with the faint six-digit shape number 943810. I have seen that shape number on Dr. Plum and on Irwin Rhodesians, both made by GBD. While it was very workable and I had not smoked it much over the years. I knew that the original restoration on it was less rigorous than my current standards. So, before I listed it for sale I wanted to work it over again. I took photos of the pipe to give a sense of the beauty.
I took photos of the pipe’s bowl and rim top to show the light cake in the bowl and the rough inner edge of the bowl. The outer edge of the bowl looks very good. The rim top is also nicked and damaged slightly. I also took photos to capture the condition of the stem. It had some light oxidation and tooth chatter and marks on the top and underside ahead of the button.I took photos of the stamping on each side of the shank. It is faint and I was unable to capture it with the photos below. There is no logo or inlaid stamp on the sides of the saddle stem. I took the stem off the shank and took a photo of the look of the pipe. It a nicely grained 9438 shape pipe. There is some beautiful grain around the bowl and shank.I decided to address the damage to the rim top and inner edge of the bowl. To deal with the rough inner edge of the rim and the rim top damage I worked on the edge with a piece of 220 grit sandpaper. I used a piece of 220 grit sandpaper on a wooden ball to further clean up the bevel. It took a bit of work to smooth out the damage and the darkening on the inner edge of the bowl. It looked much better at this point. I reamed the bowl with a Savinelli Fitsall Pipe Knife to take out the cake. I removed ti back to bare briar. I sanded the bowl walls with a piece of 220 grit sandpaper wrapped around a dowel to smooth out the walls. It looked very good. No burn damage or checking on the bowl walls.I scrubbed out the shank and the stem with pipe cleaners, cotton swabs and alcohol to remove the tars and oils. The shank was dirty though the stem airway was not too bad. It cleaned up well. I touched up the rim top and lightened areas on the shank end with an Oak Stain pen. I was able to blend it into the surrounding briar around the bowl and rim top. It looks mch better than when I started.I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped it down after each sanding pad with a damp cloth to remove the sanding debris on the surface. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the surface of the briar with my fingertips to clean, enliven and protect it. I used a shoe brush to work it into the twin rings around the bowl cap. I let the balm sit for a little while and then buffed with a cotton cloth and shoe brush to raise the shine. I set the bowl aside and turned to address the stem. I sanded the stem surface with 320-3500 grit sanding pads to remove all the marks remaining from the tooth damage. I wiped the stem down after each pad with a cloth impregnated with Obsidian Oil. It looked much better.I polished the vulcanite with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I gave it a final coat of Obsidian Oil and set it aside to dry. This GBD Made Irwin London Made 943810 Bent Rhodesian cleaned up much better this time around and looks very good. The Before & After Restoration Balm brought the colours and grain out in the finish on the pipe. It works well with the polished vulcanite saddle stem. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Irwin London Made 943810 Rhodesian fits nicely in the hand and I think it feel greats as it heats up with a good tobacco. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 1.87 ounces/53 grams. It is time to move it on to someone who will give it proper attention. I will be adding this one to the British Pipemakers Section of the rebornpipes store shortly. If you want to add it to your collection let me know. Thanks for reading this blog and my reflections on the pipe while I worked on it.

Reworking another trade, a Borlum KB&B Italian Briar Unbreakable Stem Bent Billiard

Leave a reply

by Steve Laug

A month or so ago I received an email from a fellow in Japan who had some pipes he wanted to sell. We came to an agreement and he sent me a few. One of them was this interesting smooth finish Bent Billiard. This pipe is stamped on the left side of the shank with the words BORLUM in an arc over KB&B in a cloverleaf. Underneath that it is stamped ITALIAN BRIAR in a reverse arc. On the right side of the shank it is stamped UNBREAKABLE BIT. The stamping was clear and readable. The band on the shank is cosmetic and original and reads KB&B in a cloverleaf [over] Nickel Plated. The bowl had been reamed and the pipe cleaned. The shank is very clean inside and the pipe smelled very clean. It was so clean that I don’t think the pipe had been smoked since the fellow in Japan picked it up. The rim top was clean though there were some scratches and darkening and the inside edge of the rim showed some nicks. There was no damage to the outer edges. The finish around the bowl was in decent condition with great grain under some of the grime and scratching. The stem looked good, though it was not centred on the shank. The diameter of the stem extended beyond the band on the right side and a little above the top and underside. I would need to reduce the stem diameter to fit the shank band. There were some light tooth marks and chatter on the top and underside ahead of the button. Overall, I am happy with it but I will need to rework the stem fit to the shank and clean up the rim top and edges. I took photos of the pipe before I started my work on it.  I took a photo of the rim top to show the condition of the bowl and the top. You can see clean bowl and marks on the rim top. The inner edge is slightly out of round. The stem looks good with light tooth damage and no oxidation on the surface of the hard rubber. It will look much better once I trim down the top, underside and the right side of the stem.I took photos to show the stamping on the sides of the shank and the nickel band. It is clear and readable as noted above. You can also see the fit of the stem to the shank on the top and the right side. I took the stem off and took a photo of the pipe to show its condition.

From an earlier Borlum pipe that I had refurbished back in 2014, I had learned a lot about the background of the manufacturer of the brand. I quote from that blog to summarize the historical background of the pipe (https://rebornpipes.com/tag/kbb-borlum-pipes/). The italicized portions of the text come from the blog with minor edits.

I already knew that Kaufmann Brothers and Bondy was the oldest pipe company in the USA, established in 1851. The Club Logo predated Kaywoodie with the “KB&B” lettering stamped within the Club, and a multitude of KB&B lines were in production long before “Kaywoodie” first appeared in 1919. Therefore, I knew that the pipe I had was a pre-1919, pre-Kaywoodie KB&B Made BORLUM.

As noted above, this particular pipe is stamped on the left side of the shank with the words BORLUM in an arc over KB&B in a cloverleaf. Underneath that it is stamped ITALIAN BRIAR in a reverse arc. On the right side of the shank it is stamped UNBREAKABLE BIT. As stated above it was made before Kaywoodie became the flagship name for pipes from Kaufman Brothers & Bondy (KB&B). It was made before the Kaywoodie invention of the “Stinger” was added, and even before shank logos, model stamps and other features invented by Kaywoodie came to be standards of the pipe making industry. It comes from a time when names like Ambassador, Heatherby, Melrose, Suez, Rivoli, Cadillac and Kamello dominated the pre-Kaywoodie scene. Borlum is one of those names.

I learned while researching for that blog and rediscovered while working on this one that the Borlum pipe featured some innovations that were new for the time but commonplace to us. These included (1) a solid rubber bit (vulcanite, ebonite), (2) an aluminum inner-tube construction in the stem that stabilized and strengthened the stem explaining the stamping of “Unbreakable Bit” on the right side of the shank, (3) a standard nickel-plated band (marked KB&B) to strengthen the shank connection for the stem. The stem features the older style more rounded bit tip/orific button, and you can see the aluminum inner-tube fitting just inside the tip.

I have included several pictures that I found on the internet that show the unique stem tube in the Borlum that gives rise to the claim that it has an Unbreakable Bit. The first photo shows the bent stem, third from the left with the same metal tube showing at the button. The second photo shows the other end of the tube in the tenon in the Borlum stem. That told me that the pipe I had was made after 1851 and before 1919. I am guessing that because of the other pipes in this lot dating in the late 1890s to about 1905 this one is probably from that same era. Not too bad for a 100+ year old pipe. During the hunt for information, I also found the next photo of a Borlum display and sales card. What is particularly interesting to me is the diagram at the top of the card showing the interior of the stem in place in the shank. It also includes the claim, “Guaranteed against Breakage”. I love the advertisements and sales brochures of these old pipes. The descriptive language that promises so much and the prices the pipes sold for are a nostalgic journey to the past. Note the $1 and up price tag on the sales card. The pipe that I am working on presently is identical to the bottom pipe on the right side of the photo. I have circled it in red. It has the identical shape, curved shank but has a nickel-plated band like mine. It has the hard rubber stem with an orific button. It is more rounded than the modern flat stem but it is still a comfortable feeling stem in the mouth.Now it was time to work on the pipe. I decided to deal with the diameter of the stem against the shank first. I used a folded piece of 220 grit sandpaper to take off the extra diameter of the stem on the right side and the top and bottom. I also sanded the tooth marks and chatter on the stem surface. It was a lot of handwork and fussing to get the fit correct. Once finished it looked much better. I worked over the stem with 320-3500 grit sanding pads to smooth out the scratches left in the hard rubber surface of the stem. Once finished the stem had a deep shine and really looked much better.I polished the stem surface with micromesh sanding pads. I dry sanded it with 1500-12000 grit pads. I wiped it down between pads with an Obsidian Oil impregnated cloth. I finished polishing it with Before & After Pipe Stem Polish – both Fine and Extra Fine. It looked much better. I set the stem aside and turned my attention to the bowl. I smoothed out the damaged inner edge of the bowl with a folded piece of 220 grit sandpaper. It looked much better. I started polishing out the damage on the rim top with the 220 grit sandpaper. It looked much better.I wiped the bowl down with isopropyl alcohol on a cotton pad to remove the shiny wax or shellac coat on the bowl surface. It cleaned up very well. There was a deep sandpit/flaw on the lower front left side of the bowl. I filled it in with a combination of CA glue and briar dust. I sanded the repair with 220 grit sandpaper and smoothed it out into the surrounding briar. I touched up the sanded spot on the bowl front with a Walnut stain pen. It matched the rest of the bowl surface. Once I polished it some it would blend in very well.I polished the bowl and the shank with 1500-12000 grit micromesh sanding pads. I dry sanded with each pad and wiped the briar down with a damp cloth after each pad. I paused the polishing and touched up the stain on the bowl front and the rim top. It really was looking much better at this point. Once it cured I went back to polishing with the micromesh. I worked some Before & After Restoration Balm into the finish of the bowl, rim top and shank with my fingertips and a shoe brush to get it in to the crevices and valleys. The product works to clean, enliven and protect the briar. I find that the balm really makes the briar come alive again. I let the balm sit for 15 minutes and then buffed with a cotton cloth to raise the shine. The bowl really looks good at this point. I polished the nickel ferrule on the shank end with a jeweller’s cloth. It works to polish and protect the metal from further oxidation. It is a great looking addition to the pipe. With the bowl and the stem finished I put the Borlum KB&B Italian Briar Bent Billiard with an unbreakable stem back together and buffed it on the wheel using Blue Diamond to give it a shine. I gave the bowl and the stem multiple coats of carnauba wax on the wheel. I buffed it with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. It really is a great looking pipe. The dimensions of the pipe are – Length: 4 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 1/8 inches, Chamber diameter: ¾ of an inch. The weight of this large pipe is 1.20 ounces /33 grams. This Borlum KB&B Italian Briar Bent Billiard is another great looking pipe. It is much more beautiful in person than these photos can capture. I will be putting it in my older American Pipe Collection to enjoy in the future.  This is another pipe that has the possibility of transporting the pipe man or woman back to a slower paced time in history where you can enjoy a respite. Thanks for walking through the restoration with me.

Restoring one more pipe for an old pipeman – a 1990 Calich Hand Made Grade 10 Apple

2 Replies

by Steve Laug

Earlier this month I received an email from Kathleen regarding one more Calich pipe for her husband. Here is here email.

… another abused Calich pipe that he had shamefully squirrelled away…

…About the poor abused Calich… a lovely pipe but he has two torch burned damage areas on a rusticated band around the top of the bowl… it might make more sense to cut it down below the rusticated band but I absolutely defer to your wisdom in the matter.

All Calich pipes deserve to be saved. — Kathleen

I agreed with her and I replied to Kathleen and invited her to send the pipes to me in Vancouver. They arrived just this week. I put on the Billie Holiday Disc and went through the package. Next to the four CDs there was a carefully bubble wrap bag with a pipe inside. It is by far the worst of the damaged pipes that I have worked on for this fellow. This one is an oval shanked apple shape pipe. It is stamped on the underside of the shank and read G followed by CALICH [over] Hand Made [over] 10 and above that 90. The rim top and the first ¼ down is rusticated in typical Calich style. The rest of the bowl was smooth as was the shank. The pipe had a very thick cake in the bowl and there was a lava overflow and burn damage on the top. There was some major burn damage under the lava on the mid-front edge of the bowl as well as a deep burned area on the left side toward the back of the left side. The burn marks on both were like a large bite out of the briar as can be seen in the photos. The shank had a thick coat of tars and oils and the stem had a thick tar build up as well so its fit in the shank was very sticky and dirty. The saddle stem itself is vulcanite with a single silver dot on the topside. It was heavily oxidized and had light tooth marks and chatter on both sides of the stem just ahead of the button. There were overflowing tars on the smooth shank end around the fit of the tenon in the mortise. There was a nickel repair band on the shank end that was oxidized and looking at the shank end there were some cracks in the shank. The finish was very dirty and oily but the grain I could see through the grime and tars appeared to be quite nice. A lot would be revealed once I had cleaned it. I took photos of the pipe before I started my cleanup work. I took a close-up photo of the bowl and rim top to show its condition. The inside of the bowl was heavily caked with a wet, oily tars up the sides and over the rim top. The rim top had damage on the front and on the back-left side. It is the worst as it is quite thin and is like a deep bite mark down the sides of the bowl. It left a mess for me to clean up. The stem was also is a mess. There was some light tooth marks and chatter on the top and underside ahead of the button. There was a thick coat of calcification and oxidation on the stem. The silver dot on the stem top was tarnished but very visible. I took a photo of the bowl with the stem removed to show the look of the pipe.I took a photo of the stamping on the underside of the shank. It is clear and readable as noted above. I am once again including information about John Calich the pipemaker as I have loved John Calich’s pipes for over 25 years now and have collected a few of them. I have restored quite a few of them and written blogs about them that can be read if you are interested in seeing the kind of pipes that John made. They are unique and beautiful. Each of his pipes are a work of art to me. I am including the links to the previous blogs that have written about his pipes.

https://rebornpipes.com/2015/03/03/one-of-my-john-calich-pipes-a-calich-ee-billiard/

https://rebornpipes.com/2019/01/23/i-am-the-happy-owner-of-an-unsmoked-pipe-by-the-late-john-calich/

https://rebornpipes.com/2015/03/03/one-of-my-john-calich-pipes-a-calich-ee-billiard/

https://rebornpipes.com/2014/03/21/reflecting-on-my-collection-of-john-calich-pipes/

Each of the blogs reflects on John’s pipes if you want to get a feel for them take a few minutes and read them.

When John was living I spoke with him several times via phone and had him make some new stems for some of his pipes that I picked up off eBay. He was a very kind gentleman and was always helpful when I spoke with him. He was always ready with encouragement and when I needed to know how to do something when I was first learning to repair pipes he was willing to help. He was one of the old guard of Canadian Pipe makers. I miss him. I am including a short piece from Pipedia on John to give details on his work and the grading of his pipes. The second paragraph below is highlighted in blue as it gives some information on the Grade 10 Apple that I am working on with the single silver dot now. I am also including a photo of John Calich, courtesy Doug Valitchka

John Calich was one of Canada’s finest carvers. He died in July 2008. John was a full-time pipe maker for the last 40 years. Calich pipes were mostly traditional shapes. His signature style is rustication and smooth on the same pipe along with his unique skill to stain a pipe in contrasting colors. He used only top-quality Grecian and Calabrian briar. The mouthpieces are hand finished Vulcanite “A”. Each pipe was entirely made by hand. John Calich was featured in the summer 2005 issue of Pipes & Tobacco.

His pipes are graded 3E – 7E. Retail prices range from$ 145.00 to $ 500.00 Each pipe is stamped “CALICH” 3-8E, his earlier pipes were graded from 3-14, and a single, tiny silver dot is applied to the top of the stem (https://pipedia.org/wiki/Calich).

I summarize the dating information from those blogs now: From my research and conversations I learned that John’s later pipes were graded 3E – 8E. The retail prices for them ranged from $145.00 to $500.00. Each pipe was stamped “CALICH” and given an E grade. His earlier pipes were graded from 3-14 and had a single, tiny silver dot applied to the top of the stem. More information can be found at the Pipedia article above. All of this information told me as expected that the pipe I had was an earlier one.

Armed with the information about John’s grading system I knew that the pipe in hand was an earlier Calich Hand Made Grade 10 Oval Shank Apple pipe and the 90 told me it was made in 1990. Now it was time to work on the pipe. I reamed the bowl with a PipNet reamer using the 2 and 3rd cutting heads to remove the cake back to bare briar. I cleaned up the reaming with a Savinelli Fitsall Pipe Knife to scrape back the remaining cake. I sanded the bowl with some 220 grit sandpaper wrapped around a piece of dowel to smooth out the walls of the bowl. Once it was clean I turned my attention to the rim top. There was so much damage to the rim top that I decided to use Kathleen’s suggestion and trim off the damaged areas. I flattened out the damaged areas with a wood rasp to take it down so the sides were even. I used a Dremel and sanding drum to even it out and then topped the bowl with 220 grit sandpaper on a topping board to give the rim top a smooth surface. It looked better but the inner edge is rough on the left side and the outer edge is bad on the front side.I built up the outer edge damaged area on the front of the bowl with clear CA glue and briar dust. I did the same on the left side inner edge and rim top. Once finished it really looked like a mess.I used a folded piece of 220 grit sandpaper and a medium grit sanding sponge to flatten the repaired areas on the exterior of the bowl. I also used the folded 220 sandpaper to smooth out the inner edge a bit. Later I would do a better job on that but I was just trying smooth it out for the next step.I scraped the shank with a penknife to remove the thick build up of tar and oil. The knife let me take it back to the briar without damaging the walls of the shank and mortise. I scrubbed the inside of the mortise, shank and airway in the shank and stem with alcohol, cotton swabs and pipe cleaners. Before I called it a day I stuffed the bowl with three cotton bolls until it was almost even with the rim top. I used a rolled cotton boll to plug the shank end. I used an ear syringe to fill the bowl with isopropyl alcohol. I set it aside in a pipe rest to let the alcohol leach out the oils into the cotton. I turned out the lights and let is sit overnight. In the morning I turned on the lights and this is what I found. The cotton was a dark brown both in the bowl and shank end. I removed it and took photos of the cotton with the tars. I used a piece of 220 grit sandpaper and a wooden sphere to give the inner edge of the bowl a bevel. Once it was finished it looked much better. Last evening I had come to a decision to rusticate the rim top and down the bowl side about ¼ inch around the sides. But to start I wanted it smooth.With the rim top smooth I used a series of burrs on my Dremel to rusticate the surface of the bowl and edge. It began to take on shape. I used a black stain pen to stain the rusticated portion of the bowl and rim top. The rustication was very similar to what I have seen on a lot of Calich pipes. The contrast was going to be nice once I finished working on the smooth portion of the bowl. I worked over the rustication with a brass bristle wire brush to clean off the burrs and debris on the rustication. Once I knocked it off I took photos of it to show the look of the bowl at this point. I polished the smooth bowl sides and shank with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down with a damp cloth after each pad. It looked very good with the rusticated portions. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the surface of the smooth and the rusticated briar with my fingertips and a shoe brush to clean, enliven and protect it. I let the balm sit for ten minutes then buffed with a cotton cloth to raise the shine. Mark Hoover’s Balm is a product that I have come to appreciate and one I use on every pipe I have been working on. I polished the nickel band on the shank end with a jeweller’s cloth to remove the oxidation and protect the metal from reoxidizing as quickly. It took on a good shine.  I set the bowl aside and turned my attention to the stem. I “painted” the stem surface of the stem with the flame of a Bic lighter to lift the tooth marks and chatter on the surface. I was able to remove them all.I scrubbed the oxidation on the stem surface with Soft Scrub and cotton pads and was able to remove the majority of it. The cleaning was progressing and it was looking better.I sanded the stem with 320-3500 grit sanding pads to break up the remaining oxidation. I wiped it down after each sanding pad with a soft cloth. It began to take on a shine. I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the stem down after each sanding pad with Obsidian Oil. I polished it with Before & After Pipe Stem Polish – both Fine and Extra Fine. Once I had finished the polishing I gave it final coat of Obsidian Oil and set it aside to dry. This is another pipe from Kathleen that I am working on. It is another beautifully shaped 1990 John Calich Hand Made Grade 10 Apple Pipe. It has the kind of beauty I have come to expect from John’s pipes with a rusticated rim top and first ¼ inch of the bowl side. I put the bowl and stem back together. I polished the bowl and stem with Blue Diamond to polish out the scratches in the briar and the vulcanite. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The rusticated finish is well done and the polished smooth finish on the shank end and rim top look really good with the black vulcanite stem. This Calich Hand Made Apple was a challenging pipe to bring back to life. It is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 1 ¼ inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 42 grams/1.48 ounces. Thanks for reading this blog and my reflections on the pipe while I worked on it. I will be sending it back to Kathleen later this week for her husband to enjoy.

Cleaning up another one of my restorations from many years ago

Leave a reply

by Steve Laug

I have always liked the GBD 9438 shaped pipe and this one was one that I picked up many years ago when I first started working on pipes. I found it at an antique shop. It was in the early days when I picked up most every pipe I found. I believe that like others I found in the early days this pipe cost me about $6CDN. Just remembering that reminds me how much things have changed over the years. It became a favourite shape of mine and over the years I have purchased many more 9438 pipes made by GBD for their main and their seconds lines such as Irwin and Dr. Plumb. I have added them to my collection. Here is a link to a blog I did on my collection back in 2013 (https://rebornpipes.com/2013/12/12/my-gbd-9438-saddle-stems-and-tapered-stem-rhodesians/). I have 12 – some were in rough shape and others not so bad. I have been sorting through my pipe collection and thinning out pipes that I am willing to part with. I have sold many already and others are currently on the store. For the most part these pipes have been early restorations and all needed a bit of work to bring them up to my current standard. I have set aside three 9438 pipes that I decided to rework. This is the second of them. It is stamped on the left side GBD in the oval [over] Gold Label [over] Made in France. On the right side it is stamped with the shape number 9438. While it was very workable and I had actually smoked it quite a bit over the years I knew that original restoration on it was less rigorous than my current standards. So, before I listed it for sale I wanted to work it over again. I took photos of the pipe to give a sense of the beauty, the French take on the 9438 shape and the work that needed to be done. I took photos of the pipe’s bowl and rim top to show the moderate cake in the bowl and some darkening on the bevelled rim top and a nick on the front outer edge of the bowl. I also took photos to capture the condition of the stem. It had some light oxidation and tooth chatter and marks on the top and underside ahead of the button.I took photos of the stamping on each side of the shank. It is readable and clear as noted above. The oval GBD brass rondel is visible on the left side of the saddle stem.I took the stem off the shank and took a photo of the look of the pipe. It an interesting take on a 9438 shape. Unique and beautiful.I decided to address the damage to the rim top and inner edge of the bowl. To deal with the burned inner edge of the rim and the rim top damage I worked on the edge with a piece of 220 grit sandpaper. I used a piece of 220 grit sandpaper on a wooden ball to further clean up the bevel. It took a bit of work to smooth out the damage and the darkening on the bevelled inner edge of the bowl. It looked much better at this point. I reamed the bowl with a Savinelli Fitsall Pipe Knife to take out the cake. I removed ti back to bare briar. I sanded the bowl walls with a piece of 220 grit sandpaper wrapped around a dowel to smooth out the walls. It looked very good. No burn damage or checking on the bowl walls.I scrubbed out the shank and the stem with pipe cleaners, cotton swabs and alcohol to remove the tars and oils. The shank was dirty though the stem airway was not too bad. It cleaned up well.I sanded the bowl and rim top to start smoothing out the rim top and start the polishing of the bowl. I also worked on the burn mark on the lower right of the bowl/shank union. I used 320-3500 grit sanding pads. I wiped the bowl down with a damp cloth after each pad. It really began to take on a shine. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped it down after each sanding pad with a damp cloth to remove the sanding debris on the surface. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the surface of the briar with my fingertips to clean, enliven and protect it. I let the balm sit for a little while and then buffed with a cotton cloth and shoe brush to raise the shine. I set the bowl aside and turned to address the stem. I “painted” the stem with the flame of a Bic lighter to lift the remnants of tooth marks that remained in the stem from the last time I worked on it. It worked very well and the dents lifted so that sanding the marks that remained removed all the remnants.I sanded the stem surface with 320-3500 grit sanding pads to remove all the marks remaining from the tooth damage. I wiped the stem down after each pad with a cloth impregnated with Obsidian Oil. It looked much better.It was in good condition other than the light tooth chatter so I polished the vulcanite with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I gave it a final coat of Obsidian Oil and set it aside to dry. This GBD Gold Label Made in France 9438 Bent Rhodesian cleaned up much better this second time around and looks very good. The Before & After Restoration Balm brought the colours and grain out in the smooth finish on the pipe. It works well with the polished vulcanite saddle stem. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished GBD Gold Label 9438 Rhodesian fits nicely in the hand and I think it feel greats as it heats up with a good tobacco. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¾ inches, Chamber diameter: 1 inch. The weight of the pipe is 2.08 ounces/59 grams. It is time to move it on to someone who will give it proper attention. I will be adding this one to the French Pipemakers Section of the rebornpipes store shortly. If you want to add it to your collection let me know. Thanks for reading this blog and my reflections on the pipe while I worked on it.