Tag Archives: removing oxidation

Breathing New Life into a House of Robertson Rusticated Horn

Blog by Steve Laug

The next pipe on the table was purchased on EBay on 12/20/22 from a fellow in Abita Springs, Louisiana, USA. When Jeff received the pipe he took photos of it to capture what it looked like when he removed it from the box. The pipe was dirty but underneath all of the grime it seemed like it has a great carving around the bowl and shank. The rim top and edges of the bowl had some wear and tear but was redeemable. There was a thin cake in the bowl and a light overflow on the top and edges. The fit of the stem to the shank was off and the diameter of both was slightly different. It had an odd stem set up with what looked like a shank extension with the stem glued into it. The angle of the shank was not straight to the stem was custom fitted against the shank in terms of angles. The tenon fit well in the mortise. There were tooth marks on both sides of the stem ahead of the button and on the button surface itself. Jeff took the following photos of the pipe to show its condition when he received it. He took photos of the rim and bowl to give a sense of what he was dealing with. He also took photos of the stem surfaces to show the condition of the stem when it arrived. The photos of the sides and heel of the bowl show beautiful carving around the bowl and shank sides. The brown stain adds depth finish on the pipe. Even under the grime it is a unique piece. He also took photos of the etched name on the left side of shank. It reads House of Robertson.The pipe has the name House of Robertson roughly hand-etched on the left side of the shank with an engraving tool. I am including the information that I found when I received my first of the House of Robertson Pipes. I found a link on Pipedia (https://pipedia.org/wiki/Robertson) that gave me the only information I could find on the brand. I include that in total as it is interesting to read.

“House of Robertson” was in business for many years, but alas, closed their doors in 1999. They were located in Boise, Idaho. They are noted for making rather large and interesting pipes. Thayne Robertson was a Master Mason, AF & AM, and started the shop about 1947 and his son Jon started working there in 1970 when he finished college, along with Thayne’s daughter. Thayne and his son started making the big pipes at that time, and made them together until 1987 when Thayne passed away. Jon kept the store and his sister moved on to other things. The House of Robertson appears to have closed around 1999.

Jeff had thoroughly cleaned up the pipe. He reamed the pipe with a PipNet Pipe Reamer and cleaned up the remnants with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the stem with Soft Scrub to remove the grime and calcification. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. The pipe looked very good when it arrived here in Vancouver. I took a photo of the bowl and rim top to show how clean the bowl and the rim top were. You can also see the damage on the rim top and inner edges of the bowl. I took photos of the stem surface to show the condition and tooth marks and chatter on both sides ahead of the button. You can also see how the stem and shank to not fit well together in terms of diameter.I took a photo of the clear and readable stamping on the left side of the shank. I removed the stem from the shank and took a photo of the pipe parts. It is another unique piece. I decided to start my work on the pipe by addressing the fit of the stem to the shank. With the stem in place on the shank I sanded the shank and stem fit to have a smooth transition. It took a lot of work to get it very smooth. Fortunately, the shank end was smooth so I did not have to damage the rustication on the shank. Once I finished sanding the transition was smooth and the fit was right. I then used a folded piece of 220 grit sandpaper to clean up the inner edge and give it a slight bevel inward. Doing that hid the damage on the inner edge of the bowl and blended it into the surface.Now it was time to polish the smooth portions of the bowl and shank with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad to remove the grit. The bowl began to take on a rich shine. It is a beauty. I gave the bowl a light coat of Restoration Balm and sanded the smooth portions further. The pipe took on some charm and the grain shone through. I worked Before & After Restoration Balm deep into the nooks and crannies of the carvings to clean, enliven and protect the briar. I hand rubbed it with my fingers and worked it into the finish with a horsehair shoe brush. I wiped it off with a soft cloth. I buffed the bowl with a cotton cloth to polish it. It really began to have a deep shine in the briar. I took some photos of the bowl at this point to mark the progress in the restoration. I set the bowl aside and turned my attention to the stem. I sanded the shape of the saddle and the tooth marked areas with 220 grit sandpaper and started polishing it with 600 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I put the House of Robertson Rusticated Horn back together and worked the pipe over on the buffing wheel using Blue Diamond to lightly polish the stem. I buffed the bowl with a light touch so as not to get any of the buffing compounds in the grooves of the rustication. I buffed the stem to raise the gloss on the vulcanite. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the entire pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The finished HOR Rusticated Horn is shown in the photos below. The medium brown stains on the well grained briar worked well with the black of the vulcanite stem. The polishing and the reworking of the stem material left this a beautiful and interesting looking pipe. The dimensions of the pipe are: Length: 7 inches, Height: 2 ¼ inches, Outside Diameter: 1 ¼ inches, Diameter of the chamber: ¾ inches. The weight of the pipe is 2.36 ounces/68 grams. This would be a great addition to the collection of a House of Robertson aficionado. Thanks for looking.

Trying to Breathe Life into a House of Robertson Drinking Horn

2 Replies

Blog by Steve Laug

This very beat up, large, long House of Robertson Horn Shape Pipe is the next pipe I chose to work on. We purchased it on EBay on 10/31/22 from a seller in Abita Springs, Louisiana, USA. It is quite different from the other pipes from this Boise based store that I have worked on. It is a Horn that is stamped on the left side of the shank and reads House of Robertson (two lines). On the right side it is stamped Duello. On the underside of the shank it is carved with what looks like a helmet or a cup. There is carved branch with grapes on the back top of the bowl. There was a carved object on the underside of the shank that allows the pipe to be a sitter. It seems to look like a twisted vine carved into the bottom of the bowl. I am including photos below that were included by the seller in his EBay listing. The first two show the sides of the bowl.The next series of photos show the grain around the bowl and the stamping on the shank sides.He included photos of the stamping on the sides of the shank and the carving on the underside of the shank.The stem had tooth marks and wear on both sides ahead of the button and on the surface of the button itself.He included a photo of the bowl with the stem removed. It is a pipe with a lot of potential.The pipe has the name House of Robertson roughly hand-etched on the left side of the shank with an engraving tool. I am including the information that I found when I received my first of the House of Robertson Pipes. I found a link on Pipedia (https://pipedia.org/wiki/Robertson) that gave me the only information I could find on the brand. I include that in total as it is interesting to read.

When Jeff received the pipe he took photos of it to capture what it looked like when he removed it from the box. The pipe was dirty but underneath all of the grime it seemed like it has some nice grain around the bowl and shank. The rim top and edges of the bowl had been badly abused and beat up and showed chips and wear. There was a thick cake in the bowl and an overflow on the top and edges. There were a lot of scratches and cuts in the briar around the bowl sides and shank. The carving of the vine and grapes at the back top of the bowl is quite damaged as is the “carved vine” on the bottom of the bowl. The pipe has seen a lot of rough travel since the day it left Robertson’s pipe shop in Boise, Idaho. The fit of the stem to the shank is snug and looks good. There were casting marks on the left and right sides of the stem at the shank union that make me think it is a replacement stem. There is also a chipped area on the underside of the shank where it appears the stem had been pried away at some point. The tenon on the stem was incredibly short given the depth of the mortise. There were tooth marks on both sides of the stem ahead of the button and on the button surface itself. Jeff took the following photos of the pipe to show its condition when he received it.The next close-up photos show the condition of the bowl and the rim top. They show the cake in the bowl and the lava overflowing onto the rim top. You can also see how beat up the rim top is. It is in rough condition. The edges are also chipped and damaged. The photos of the stem show the tooth mark and tooth marks on both sides of the stem. The photos of the sides and heel of the bowl show the grain and the nicks and scratches around the bowl and shank. The brown stain adds depth finish on the pipe. Even under the grime it is a unique piece.He also took photos of the carving on the underside of the shank. You can see the damage on the front side of the carving.The next photo shows the etched name on the left side of shank. It reads House of Robertson. On the back top of the bowl you can see the condition of what appears to be a grape vine. The more I looked at it the combination of grape vines, grapes and the thick branch on the underside of the shank make me think that the pipe is a drinking or wine horn. The shape is very reminiscent of the shape of the horn. It would really help if the stem had a bend in it. The carved vine on the rim edge, the carved chunk of fine on the underside seem to point in this direction.Jeff had thoroughly cleaned up the pipe. He reamed the pipe with a PipNet Pipe Reamer and cleaned up the remnants with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the stem with Soft Scrub to remove the grime and calcification. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. The pipe looked very good when it arrived here in Vancouver. I took a photo of the bowl and rim top to show how clean the bowl and the rim top and inner edges of the bowl. I took photos of the stem surface to show the condition and tooth marks and chatter on both sides ahead of the button. You can see the chip or dented area where the stem meets the shank in the third photo below.I took photos of the stamping on the shank sides (left, right and underside). It is readable as noted above and though faint is clear.I removed the stem (note the short tenon) from the shank and took a photo of the pipe parts. It is a unique piece. The bowl needed a lot of work. I would need to rework the rim top and the inner and outer edge of the bowl and the also sand out the deep gouges, scratches and file marks in the briar on the sides of the bowl. It really was a refinishing nightmare. I decided to start my work on the bowl by addressing the damaged rim top and edges. I topped the bowl to get a flat surface to start on. I used a topping board and 220 grit sandpaper. I then used a wooden ball and 220 grit sandpaper to give the inner edge a bevel inward. Doing that hid the damage on the inner edge of the bowl and blended it into the surface. I sanded the bowl sides and shank with a folded piece of 220 grit sandpaper to smooth out and minimize the scratches and marks on the briar of the bowl and shank. It was beginning to look much better. I wiped the bowl and rim top down with alcohol and cotton pads to remove the debris and the heavy stain coat that hid the grain. Once I had wiped it down the grain really stood out. I used a medium and fine grit sanding pad to sand the bowl and rim top further. Once finished the pipe really started to show promise that I was hoping for in an other other wise mess of a pipe. The grain stood out better and the carving on top back of the bowl was clearly a vine and grapes. It looked much better.I needed a break from sanding the bowl so I set it aside and turned my attention to the stem. To start my work on it I decided to heat it and give it a slight bend in keeping with the look of the horn. When it was flexible I bent it and it snapped off in my hand – utter frustration!! That set me back a bit but in the long haul it was much better as I could use a stem with a longer tenon and a better fit to the shank. I went through my can of stems and found a stem with the right bend, the right tenon sized and length for the shank and that would only need a little adjustment to the diameter to make it fit.I put the stem on the shank and took photos of the new look of the pipe. You can see that the diameter of the stem is slightly larger than the diameter of the shank. But I liked the look of the new stem and the angles of the bend it really is looking like a drinking/wine horn. I sanded the diameter of the stem with 220 grit sandpaper to reduce it to the same diameter as the shank. Once the stem was adjusted in diameter it looked very good. I sanded the entire stem including the light tooth chatter at the button with 220 grit sandpaper to smooth out the stem.I removed the stem from the shank and continued sanding out the tooth marks and chatter at the button and smoothing out and shaping the shank end of the stem. Once I was happy with the fit and look of the stem I started polishing it with 600 grit wet dry sandpaper. I took photos of the underside of the shank stem junction to show the damage that I noted above – the chip out of the underside of the shank. It made the fit against the underside of the shank a challenge that gave me two options to address. I could either use the topping board to flatten it or I could put a thin band on the shank.I tried to top the shank end a bit on the topping board with 220 grit sandpaper but it did not solve the problem as the chip went quite deep into the underside. I decided to go with a thin brass band on the shank end to repair the damage on the end of the shank. I heated the band and pressed in place on the shank. It gave the shank a flat face for the stem to sit against. I liked the look of the bling and the fit of the stem against it. (A passing comment. Can you see the wine cup in the stamp on the shank in the first photo. I put the fitted stem in place on the shank and took photos of the look of the pipe at this point in the process. It looks far better than when I started. Now it was time to polish the bowl and shank with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad to remove the grit. The bowl began to take on a rich shine. It is a beauty. I used a Black stain pen to darken the vine and the grapes on the back side of the bowl and the stamping on the shank sides to highlight the House of Robertson and the Duello stamp. Once they were stained I used the remainder of the micromesh pads to clean up the excess black. I worked Before & After Restoration Balm deep into the nooks and crannies of the carvings to clean, enliven and protect the briar. I hand rubbed it with my fingers and worked it into the finish with a horsehair shoe brush. I wiped it off with a soft cloth. I buffed the bowl with a cotton cloth to polish it. It really began to have a deep shine in the briar. I took some photos of the bowl at this point to mark the progress in the restoration. I polished the stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I put the House of Robertson Drinking Horn back together and worked the pipe over on the buffing wheel using Blue Diamond to lightly polish the stem. I buffed the bowl with a light touch so as not to get any of the buffing compounds in the grooves of the rustication. I buffed the stem to raise the gloss on the vulcanite. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the entire pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The finished HOR Drinking Horn is shown in the photos below. The medium brown stains on the well grained briar worked well with the brass band and the bent black of the vulcanite stem. The polishing and the reworking of the stem material left this a beautiful and interesting looking pipe. The dimensions of the pipe are: Length: 7 inches, Height: 2 inches, Outside Diameter: 1 ¼ inches, Diameter of the chamber: 7/8 inches. The weight of the pipe is 1.69 ounces/ 48 grams. This would be a great addition to the collection of a House of Robertson collector. If you are interested in adding it to your collection it will be on the rebornpipes store in the American (US) Pipemakers Section shortly. Thanks for looking.

Restoring a Nicely Grained Stanwell Royal De Luxe 148 Canadian with internal bowl damage

Leave a reply

Blog by Steve Laug

It is a rainy Saturday for me here in Vancouver so I decided to work on another one that was purchased on 01/10/2023 in a lot of pipes that came to us from Copenhagen, Denmark. This is a oval shank Canadian with a smooth finish and a silver band on the shank. It is another Made in Denmark Stanwell. The smooth finish on this pipe, around the bowl and shank has a mix of grain highlighted by the reddish brown stain. The pipe is stamped on the underside of the shank near the stem/shank junction and reads STANWELL [over] Royal De Luxe [over] Made In Denmark. On the underside of the center of the shank it has the shape number 148 stamped. On the silver band there was a 925 stamp on the right side giving the quality of silver in the band. The pipe was a well used pipe when Jeff received it. There was dust and grime ground into the finish which was worn thin on the sides of the bowl. The mixture of brown stains highlights some beautiful grain under the dirt. The bowl was moderately caked and there was a light overflow of lava on the smooth rim top. The inner edge looked worn but okay. There was a trough on the bottom of the bowl that had been worn with repeated use of pipe cleaners. It was not terribly deep but bothersome looking and if left alone could further wear through the heel of the bowl. The saddle stem is vulcanite and was dirty, oxidized and had light tooth marks, chatter and scratches on both sides ahead of the button and on the button itself. There is a Silver Crown S logo inlaid on the topside of the saddle stem. Jeff took photos of the pipe before he started his clean up work on it. He took photos of the bowl and rim top to show what they looked like before his clean up. You can see the scratches in the smooth rim top. The inner edge also shows some damage. He also took some of the stem to show the condition of both sides. The photos of the sides and heel of the bowl show the faded stain and the grain around the bowl and shank. The mixture of brown stains adds depth finish on the pipe. Even under the grime it is a real beauty. You can also see the swirls in the acrylic shank extension. The stamping on this one was around the bamboo horizontally and is shown in the photo below. It is clear and readable as noted above. The second photo shows the white stamped crown S on the stem side. Before I started my work on the pipe I wanted to see if I could find any information that would help me get a sense of the line. I turned to Pipephil to see if there was any listing on the Royal Deluxe Line (http://pipephil.eu/logos/en/logo-stanwell.html). There was nothing listed.

I then turned to Pipedia (https://pipedia.org/wiki/Stanwell) for more information. The article is great and gives a lot of history on the brand. There were also links to a shape article by Bas Stevens that I originally published on rebornpipes. I looked up the 148 shape number to see who had designed that shape (https://pipedia.org/wiki/Stanwell_Shape_Numbers_and_Designers). I quote the information on shape 148.

Canadian, short saddle mouthpiece by Jess Chonowitsch.

Now it was time to work on the pipe.

Jeff had thoroughly cleaned up the pipe. He reamed the pipe with a PipNet Pipe Reamer and cleaned up the remnants with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the stem with Soft Scrub to remove the grime and calcification. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. The pipe looked very good when it arrived here in Vancouver. I took close up photos of the bowl, rim and the stem. You can see the damage on rim top and inner edge. The bowl is quite clean inside with trough worn into the bottom of the bowl visible in the photo below. The vulcanite saddle stem is in good condition with light tooth marks and some chatter as noted above. I took photo of the stamping on the underside of the shank. It is faint but readable as noted. I removed the stem from the shank and took a photo to give a sense of the proportions of the pipe. The briar is quite beautiful and the dark and medium stains really make it stand out.I started my work on the pipe by dealing with the trough in the bottom of the bowl. I decided to use a mixture of Plaster of Paris and water to make a thick paste to fill in the trough in the bottom and up the front side of the bowl. I put a pipe cleaner in the airway to keep it from clogging. I applied the plaster in the bowl with a dental spatula, tamped it down with a tamper and cleaned up the sides and edges of the repair with folded pipe cleaners. While the Plaster repair cured, I worked on the damage to the inner edge and the rim top with a folded piece of 220 grit sandpaper to bring the edge back into round and smooth out the scratches on the top. By the end it looked much better.I wiped down the excess Plaster of Paris with qtips until all that remained was in the bottom and front of the bowl. I let the inside of the bowl repair cure. Once cured I would need to give it a slight bowl coating.I polished the bowl and shank with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad to remove the grit. The bowl began to take on a rich shine. It is a beauty. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the briar with my finger tips. I let it sit for 10 minutes and the Balm did its magic. It enlivens, cleans and preserves the briar. It certainly brought this bowl back to life. I buffed it off with a clean cloth and took the following photos. I coated the bowl with a mixture of sour cream and charcoal powder. The bowl coating is applied over the Plaster of Paris repair on the bottom of the bowl and the walls. I used a dental spatula to mix it up and put a pipe cleaner in the airway to keep it from clogging. I used a folded pipe cleaner to paint it on the bowl bottom and walls. Once finished I set it aside to dry. I set the bowl aside and turned my attention to the stem. I polished the stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This Stanwell Royal De Luxe 148 Canadian with a vulcanite saddle stem is a great looking pipe now that it has been restored. The mix of stains once cleaned up really highlights the grain and the polished sandblast finish is stunning. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Stanwell Royal Deluxe 149 Canadian fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 1/8 inch, Chamber diameter: ¾ of an inch. The weight of the pipe is 36 grams / 1.27 ounces. I will be adding the pipe to the Danish Pipe Makers Section of the rebornpipes store. If you are interested in purchasing this pipe send me a message or an email. Thanks for reading this blog and my reflections on the pipe while I worked on it.

Restoring a Nicely Grained Stanwell Buffalo 141 Billiard

Leave a reply

Blog by Steve Laug

It is a rainy Saturday for me here in Vancouver so I decided to work on another one that was purchased on 01/10/2023 in a lot of pipes that came to us from Copenhagen, Denmark. This is a tall billiard almost a tall Brandy with a smooth finish and a variegated yellow/gold shank extension. It is another Made in Denmark Stanwell. The smooth finish on this pipe, around the bowl and shank has a mix of grain highlighted by the reddish brown stain. The pipe is stamped on the underside of the shank near the stem/shank junction and reads STANWELL [over] Made in Denmark [over] Buffalo. On the left side of the shank it has the shape number 141 stamped. The pipe was a well used pipe when Jeff received it. There was dust and grime ground into the finish. The mixture of brown stains highlights some beautiful grain under the dirt. The bowl was lightly caked and there was a light overflow of lava on the smooth rim top. The inner edge looked quite good. It had been reamed recently before we received it and there were scrape marks around the bottom of the bowl. They not grooves but rather smooth clean briar scraped by a reamer. The stem is vulcanite and was dirty, oxidized and had light tooth marks, chatter and scratches on both sides ahead of the button and on the button itself. There is a white crown S logo stamped on the left side of the taper stem. Jeff took photos of the pipe before he started his clean up work on it. He took photos of the bowl and rim top to show what they looked like before his clean up. You can see the scratches in the smooth rim top. The inner edge also shows some damage. He also took some of the stem to show the condition of both sides. The photos of the sides and heel of the bowl show the uniquely stained grain around the bowl and shank. The mixture of brown stains adds depth to the finish on the pipe. Even under the grime it is a real beauty. You can also see the swirls in the acrylic shank extension. The stamping on this one was around the bamboo horizontally and is shown in the photo below. It is clear and readable as noted above. The second photo shows the white stamped crown S on the stem side. Before I started my work on the pipe I wanted to see if I could find any information that would help me get a sense of the line. I turned to Pipephil to see if there was any listing on the Buffalo Line (http://pipephil.eu/logos/en/logo-stanwell.html). There was nothing listed.

I then turned to Pipedia (https://pipedia.org/wiki/Stanwell) for more information. The article is great and gives a lot of history on the brand. There were also links to a shape article by Bas Stevens that I originally published on rebornpipes. I looked up the 141 shape number to see who had designed that shape (https://pipedia.org/wiki/Stanwell_Shape_Numbers_and_Designers). I quote the information on shape 141.

Billiard, medium size, conical bowl, full mouthpiece by Jess Chonowitsch.

I found a listing on Smokingpipes.com that had a description of the Buffalo line of pipes (https://www.smokingpipes.com/pipes/estate/denmark/moreinfo.cfm?product_id=229371). I am including part of the description below.

A rather easy to spot Stanwell series, the pipes of the Buffalo line were distinguished by swirled pattern acrylic ferrules in colors reminiscent of water buffalo horn.

Now it was time to work on the pipe.

Jeff had thoroughly cleaned up the pipe. He reamed the pipe with a PipNet Pipe Reamer and cleaned up the remnants with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the stem with Soft Scrub to remove the grime and calcification. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. The pipe looked very good when it arrived here in Vancouver. I took close up photos of the bowl, rim and the stem. You can see the damage on rim top and inner edge. The bowl is quite clean inside with marks from a previous reaming on the bottom of the bowl. The acrylic stem is in good condition with light tooth marks and some chatter as noted above.I took photo of the stamping on the underside and right side of the shank. It is clear and readable as noted above. I removed the stem from the shank and took a photo to give a sense of the proportions of the pipe. The briar is quite beautiful and the dark and medium stains really make it stand out.I started my work on the pipe working on the damage to the inner edge and the rim top with a folded piece of 220 grit sandpaper to bring the edge back into round and it looked much better.I used a Cherry stain pen to touch up the sanded edges and top spots on the rim top where I sanded it smooth and removed the damaged. The colour was a perfect match to the remainder of the bowl and shank.I polished the bowl and shank with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad to remove the grit. The bowl began to take on a rich shine. It is a beauty. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the briar with my finger tips. I let it sit for 10 minutes and the Balm did its magic. It enlivens, cleans and preserves the briar. It certainly brought this bowl back to life. I buffed it off with a clean cloth and took the following photos. I set the bowl aside and turned my attention to the stem. I polished the stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This Stanwell Buffalo 141 Billiard with a vulcanite taper stem is a great looking pipe now that it has been restored. The mix of stains once cleaned up really highlights the grain and the polished sandblast finish is stunning. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Stanwell Buffalo 141 Billiard fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 inch, Chamber diameter: ¾ of an inch. The weight of the pipe is 40 grams / 1.41 ounces. I will be adding the pipe to the Danish Pipe Makers Section of the rebornpipes store. If you are interested in purchasing this pipe send me a message or an email. Thanks for reading this blog and my reflections on the pipe while I worked on it.

Restoring a Stanwell Bamboo Brown Sandblast Billiard with a taper stem

Leave a reply

Blog by Steve Laug

This quiet day off for me here in Vancouver I decided to work on was another one that was purchased on 11/14/2022 in a lot of pipes that came to us from Copenhagen, Denmark It included a group of Stanwell Bamboo pipes that are quite beautiful, combining a briar bowl, a bamboo shank and an vulcanite or acrylic stem. This is the last of the bamboo pipes and the second of the sandblast pipes that we had to work on. I have enjoyed working on these Bamboos and the light weight feel of the pipe in hand. The rugged sandblast on this pipe, around the bowl and shank has a mix of ridges and valleys highlighted by dark stain. The pipe is stamped around the middle of the bamboo and reads STANWELL. The pipe was a well used pipe when Jeff received it. There was dust and grime ground into the sandblast finish. The mixture of brown stains highlights some beautiful blast under the dirt. The bowl was heavily caked and there was an overflow of lava on the smooth rim top. The inner edge was hard to see clearly and the lava could easily be hiding damage. The stem is vulcanite and was dirty, oxidized and had light tooth marks, chatter and scratches on both sides ahead of the button and on the button itself. There is a brass/gold crown S logo inlaid on the left side of the saddle stem. Jeff took photos of the pipe before he started his clean up work on it. He took photos of the bowl and rim top to show what they looked like before his clean up. You can see the scratches in the smooth rim top. The inner edge also shows some damage. He also took some of the stem to show the condition of both sides. The photos of the sides and heel of the bowl show the uniquely stained grain around the bowl and shank. The mixture of black and brown stains adds depth finish on the pipe. Even under the grime it is a real beauty. He also took photos of the bamboo showing the patina on the wood. The stamping on this one was around the bamboo horizontally and is shown in the photo below. It is clear and readable as noted above. The second photo shows the gold crown S on the stem side. Before I started my work on the pipe I wanted to see if I could find any information that would help me get a sense of the line. I turned to Pipephil to get a quick review of the Bamboo line (http://pipephil.eu/logos/en/logo-stanwell.html). The Brass Crowned S inlaid logo on the stem is shown in the photo below. I have included a screen capture of the brand info there.I then turned to Pipedia (https://pipedia.org/wiki/Stanwell) for more information. The article is great and gives a lot of history on the brand. There were also links to catalogues at the bottom of the page. I am including a page from a catalogue on the site below that gives a bit of a glimpse into the brand. Here is the link (http://www.axeljeske.de/Pfeifen/Stanwell_Amager.pdf). The catalogue page gives a great description of the Bamboo line. It reads as follows: Top quality bowls perfectly fitted with porous bamboo shanks for casual elegance.

Now it was time to work on the pipe.

Jeff had thoroughly cleaned up the pipe. He reamed the pipe with a PipNet Pipe Reamer and cleaned up the remnants with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the stem with Soft Scrub to remove the grime and calcification. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. The pipe looked very good when it arrived here in Vancouver. I took close up photos of the bowl, rim and the stem. You can see the damage on rim top and inner edge. The bowl is quite clean inside. The acrylic stem is in good condition with light tooth marks and some chatter as noted above.I took photo of the stamping on the left side of the shank. It is readable as noted above. I removed the stem from the shank and took a photo to give a sense of the proportions of the pipe. Once again it has a stainless steel tenon. The sandblast is quite beautiful and the dark and medium stains really make it stand out.I started my work on the pipe working on the damage to the inner edge and the rim top with a folded piece of 220 grit sandpaper to bring the edge back into round and it looked much better.I polished the smooth rim top with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad to remove the grit. The bowl began to take on a rich shine. It is a beauty. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the briar and the bamboo with my finger tips. I let it sit for 10 minutes and the Balm did its magic. It enlivens, cleans and preserves the briar. It certainly brought this bowl back to life. I buffed it off with a clean cloth and took the following photos. I set the bowl aside and turned my attention to the stem. I “painted” the tooth marks on the stem with the flame of a Bic lighter to lift them. I was able to lift the majority of them and filling the remnants of the marks with clear CA glue. I sanded out the repairs with 220 grit sandpaper and then started the polishing with 600 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This Stanwell Bamboo Sandblast Billiard with a vulcanite taper stem is a great looking pipe now that it has been restored. The mix of stains once cleaned up really highlights the grain and the polished sandblast finish is stunning. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Stanwell Bamboo Sandblast Billiard fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 1/8 inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 34 grams / 1.20 ounces. I will be adding the pipe to the Danish Pipe Makers Section of the rebornpipes store. If you are interested in purchasing this pipe send me a message or an email. Thanks for reading this blog and my reflections on the pipe while I worked on it.

Cleaning up a unique Peterson’s Dublin XL02 July 4, 2000 Commemorative Pipe

1 Reply

Blog by Steve Laug

The next pipe on the table is one that was sent to my by a friend who had just purchased it. The shape reminded me of a large version of a Peterson’s 02 shape. He sent me the following photos of the pipe before he mailed it to me and I was interested. I am including those photos for you to see what I saw when he sent it to me. It is dirty for sure but it has some amazing grain around the bowl and shank and a Sterling Silver Band on the shank. The stem is a P stamped fishtail and looks great on the bowl. The pipe arrived on Monday and I opened the box to find this pipe. It is stamped on the left side of the shank and reads Peterson’s [over] Dublin. On the right side it is stamped Made in the Republic of Ireland in 3 lines [over] the shape number XL02. The silver band is stamped with a US Flag in the center of a circle with Peterson’s arced over the top of the circle and July 4, 2000 arced below the circle. Below that there are hallmarks – Hibernia (Ireland), Harp (quality of silver) and the date stamp of an italic O which is the date stamp for the year 2000. The fishtail saddle stem is vulcanite and has the Peterson’s P stamp on the left side of the saddle. The stem was lightly oxidized with some tooth marks and chatter on both the top and underside ahead of the button. It was tight in the shank and would definitely fit better once cleaned. The bowl had a light cake in it and smelled strongly of Latakia/English blends. The finish was in good condition but there was some dust and grime ground into it. I took some photos of the pipe when I unpacked it. I have included them below. I took photos of the bowl and rim top to show what they looked like before my clean up. I also took some of the stem to show the condition of both sides. The photos of the sides and heel of the bowl show the grain around the bowl and shank. The mixture of brown stains adds depth to finish on the pipe. Even under the grime it is a real beauty. The stamping on the sides of the shank are shown in the photos below. They are clear and readable as noted above. The “P” stamp on the left side of the saddle is also in good condition. I removed the stem and took a photo of the parts to give a sense of the proportions of the pipe and its overall look. It is a real beauty.The band on the shank of the pipe was loose and the glue had dried out. It slid off the shank with little effort. I cleaned up the shank end with alcohol on a cotton pad. I spread some all purpose white glue around the area with a dental spatula and pressed the band in place. I wiped off the excess glue with a damp cotton pad and took photos of the newly glued band. Once the glue hardened I polished the silver band with a jewelers cloth. It removed most of the oxidation but a little more work on it would leave it shining bright. I reamed out the light cake in the bowl with a PipNet pipe reamer. I cleaned up the reaming with a Savinelli Pipe Knife and finished by sanding the bowl walls with a piece of dowel wrapped with 220 grit sandpaper. I cleaned out the shank and the airway into the bowl and the shank with pipe cleaners, cotton swabs and 99% isopropyl alcohol. To deghost the pipe of the heavy Latakia smells I stuffed bowl with cotton bolls and used a twisted cotton boll in the shank. I filled the bowl with alcohol using an ear syringe to place the alcohol directly in the bowl. I set it aside to let it do its work drawing out the tars and oils from the walls of the bowl and the shank. I let it sit overnight and then removed the dirty and oily cotton and debris that had accumulated. I ran a pipe cleaner through the shank and removed any remnants of debris. The pipe smelled significantly better. I polished the bowl with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down with a damp cloth after each sanding pad. It really began to take on a shine. It is a beautiful piece of briar. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the briar with my finger tips. I let it sit for 10 minutes and the Balm did its magic. It enlivens, cleans and preserves the briar. It certainly brought this bowl back to life. I buffed it off with a clean cloth and took the following photos. I set the bowl aside and turned my attention to the stem. I “painted” the stem with the flame of a Bic lighter to lift the tooth marks. The majority of them were lifted. I sanded out what remained with 220 grit sandpaper and then started the polishing with 600 grit wet dry sandpaper. I polished the vulcanite with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This Peterson’s 4^th of July 2000 XL02 Bent Apple with a vulcanite saddle stem is a great looking pipe now that it has been restored. The beautiful finish really highlights the grain and the polished finish is stunning. I polished the silver band with a jewelers cloth to protect and shine the silver. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Peterson’s Dublin 4^th of July 2000 XL02 fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¼ inch, Chamber diameter: ¾ of an inch. The weight of the pipe is 69 grams / 2.43 ounces. I will be sending it back to the pipeman so that he can enjoy his “new” pipe. Thanks for reading this blog and my reflections on the pipe while I worked on it.

Restoring a Stanwell Bamboo Tall Billiard with a taper stem

Leave a reply

Blog by Steve Laug

This rainy evening here in Vancouver I decided to work on was another one that was purchased on 11/14/2022 in a lot of pipes that came to us from Copenhagen, Denmark It included a group of Stanwell Bamboo pipe that are quite beautiful, combining a briar bowl, a bamboo shank and a an vulcanite stem. The grain around the bowl and shank has a mix of straight and flame grain. The pipe is stamped on the left side of the bamboo and reads STANWELL. The pipe was a well used pipe when Jeff received it. There was dust and grime ground into the finish. The mixture of brown stains highlights some beautiful grain under the dirt. The bowl was heavily caked and there was an overflow of lava on the rim top. The inner edge was hard to see clearly and the lava could easily be hiding damage. The stem is vulcanite and was lightly oxidized, dirty with light tooth marks and chatter on both sides ahead of the button and on the button itself. There is a brass/gold crown S logo inlaid on the left side of the taper stem. Jeff took photos of the pipe before he started his clean up work on it. He took photos of the bowl and rim top to show what they looked like before his clean up. He also took some of the stem to show the condition of both sides. The photos of the sides and heel of the bowl show the uniquely stained grain around the bowl and shank. The mixture of black and brown stains adds depth finish on the pipe. Even under the grime it is a real beauty. The stamping on the left side the bamboo is shown in the photo below. It is clear and readable as noted above. The second photo shows the gold crown S on the stem side. Before I started my work on the pipe I wanted to see if I could find any information that would help me get a sense of the line. I turned to Pipephil to get a quick review of the Bamboo line (http://pipephil.eu/logos/en/logo-stanwell.html). The Brass Crowned S inlaid logo on the stem is shown in the photo below. I have included a screen capture of the brand info there.I then turned to Pipedia (https://pipedia.org/wiki/Stanwell) for more information. The article is great and gives a lot of history on the brand. There were also links to catalogues at the bottom of the page. I am including a page from a catalogue on the site below that gives a bit of a glimpse into the brand. Here is the link (http://www.axeljeske.de/Pfeifen/Stanwell_Amager.pdf). The catalogue page gives a great description of the Bamboo line. It reads as follows: Top quality bowls perfectly fitted with porous bamboo shanks for casual elegance.

Now it was time to work on the pipe.

Jeff had thoroughly cleaned up the pipe. He reamed the pipe with a PipNet Pipe Reamer and cleaned up the remnants with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the stem with Soft Scrub to remove the grime and calcification. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. The pipe looked very good when it arrived here in Vancouver. I took close up photos of the bowl, rim and the stem. You can see the darkening and scratches on rim top and edges. The bowl is quite clean inside. You can see the oxidation on the vulcanite shank end on the bamboo. The stem is in good condition with light tooth marks and some chatter as noted above.I took photo of the stamping on the left side of the shank. It is readable as noted above.I removed the stem from the shank and took a photo to give a sense of the proportions of the pipe.I started my work on the pipe working on the damage to the inner edge and the rim top with a folded piece of 220 grit sandpaper to bring the edge back into round and it looked much better.I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad to remove the grit. The bowl began to take on a rich shine. It is a beauty. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the briar with my finger tips. I let it sit for 10 minutes and the Balm did its magic. It enlivens, cleans and preserves the briar. It certainly brought this bowl back to life. I buffed it off with a clean cloth and took the following photos. I “painted” the stem with the flame of a Bic lighter to lift the tooth marks. The majority of them were lifted. I sanded out what remained with 220 grit sandpaper and then started the polishing with 600 grit wet dry sandpaper. I set the bowl aside and turned my attention to the stem. I was able to polish out the light tooth marks and chatter with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This Stanwell Bamboo Billiard with a vulcanite taper stem is a great looking pipe now that it has been restored. The beautiful finish really highlights the grain and the polished finish is stunning. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Stanwell Bamboo Billiard fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 6 inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 inch, Chamber diameter: ¾ of an inch. The weight of the pipe is 34 grams / 1.20 ounces. I will be adding the pipe to the Danish Pipe Makers Section of the rebornpipes store. If you are interested in purchasing this pipe send me a message or an email. Thanks for reading this blog and my reflections on the pipe while I worked on it.

Another Interesting Clean – a Yello-Bole Imperial 642 Carburetor Dublin

Leave a reply

Blog by Steve Laug

The next pipe on my table is the third and final pipe from threesome sent to for work from a fellow in Eastern Canada. This one is a smooth Dublin/Billiard. I found that it is stamped on the left side and read Imperial in script [over] Yello-Bole. On the right side it has the shape number 642 and on the heel it is stamped Carburetor next to the small aluminum tube in the heel. On the shank end where the stem and shank meet it is stamped Made in France. The bowl was hardly used and has a tube extending from the bottom of the bowl upward about 1/8 of an inch. Though there was some darkening in the bottom of the bowl the walls were still lined with the famous Yello-Bole honey coating and looked untouched. The bowl edges and rim top looked very good. The smooth finish was still shiny and new looking. The stem is probably vulcanite with a yellow circle on the left side of the taper and a huge chunk of vulcanite missing from the underside extending from the button forward about ½ inch. There were tooth marks and tooth chatter on both sides of the stem ahead of the button and on the surface. There was a Yello-Bole scoop stinger in the tenon that was also clean and undamaged. In looking at it I figured it would need a new stem. I took photos of the pipe before I started my work on it. I took photos of the bowl and rim top to show what they looked like before I started my clean up. I also took some of the stem to show the condition of both sides and the large chunk of vulcanite missing on the underside. The stamping on the sides of the shank are shown in the photos below. They are clear and readable as noted above. I removed the stem from the shank and took a photo of them to show the perspective on the pipe. You can see the burn marks on the bowl and shank and the scratches and fills in the briar.I turned my attention to the clean up of the pipe itself. The obvious place to start on this pipe was to find a stem that would fit in the shank and if possible be a Yello-Bole logoed stem. I found one in my collection of stems that had the length and tenon dimensions. It was a little larger in diameter than the original but with adjustments it would look good. The replace was not new and had tooth marks and dents on the button end but otherwise looked good.I fit it in the shank and worked on the diameter of the stem with a flat file to remove the excess material on the aluminum band and the vulcanite. It took some work and careful filing but it worked fairly well. I took the following photos of the stem after I had filed it down. It looked quite good at this point in the process. I would need to fine tune the fit with sandpaper but I liked the direction it was going. I filled in the marks that remained with clear CA glue. When the repairs cured I used a small file to reshape the button edge and flatten out the repairs. I sanded the repairs 220 grit sandpaper to blend them into the surface. I started the polishing process with 600 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I cleaned out the internals of the shank and stem with pipe cleaners, cotton swabs and isopropyl alcohol. Since the bowl exterior was so clean I polished it with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad to remove the grit. The bowl began to take on a rich shine. The briar took on a newer, richer look. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the briar with my finger tips and into the rusticated portion with a shoe brush. I let it sit for 10 minutes and the Balm did its magic. It enlivens, cleans and preserves the briar. It certainly brought this bowl back to life. I buffed it off with a clean cloth and took the following photos. This Yello-Bole Imperial 642 Dublin is a great looking pipe with its replacement stem and restoration. The smooth, rich red finish highlights the grain of the pipe. I put the new stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Yello-Bole Dublin fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ¾ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: 7/8 of an inch. The weight of the pipe is 50 grams/1.76 ounces. I have one more pipe for this Eastern Canada Pipeman to work on. Once I have finished all three I will be sending them back to him to enjoy. Thanks for reading this blog and my reflections on the pipe while I worked on it.

Another Interesting Clean up of an Imported Briar KLEENEST Filter Billiard

Leave a reply

Blog by Steve Laug

The next pipe on my table was second pipe from threesome sent to for work from a fellow in Eastern Canada. This one is a partially rusticated Billiard. I found that it is stamped on the left side and read KLEENEST [over] Imported Briar. The bowl had a light cake and there was some lava and darkening on the back rim top and edge of the bowl. The bowl was slightly out of round from reaming. The finish was dark, dirty and oily feeling and the briar was semi rusticated. The lower half of the bowl and the shank were rusticated and there was a carved leaf on the front of the bowl above the rustication. The rest of the bowl was smooth. The stem is probably vulcanite and has a Medico style tenon that fits a 6MM filter. There were tooth marks and tooth chatter on both sides of the stem ahead of the button and on the surface. There is no stamping on the stem. I took photos of the pipe before I started my work on it. I took photos of the bowl and rim top to show what they looked like before I started my clean up. I also took some of the stem to show the condition of both sides. The stamping on the sides of the shank are shown in the photos below. They are clear and readable as noted above.I removed the stem from the shank and took a photo of them to show the perspective on the pipe. You can see the burn marks on the bowl and shank and the scratches and fills in the briar.I googled the brand and found a gallery of pipes marked KLEENEST Imported Briar. Here is the link(https://pipes.collectionhero.com/outer/gallery_listings.php?keyword=Kleenest+#google_vignette).

In the pipes listed in the gallery there were ties to Kaywoodie, Medico, Grabow and some were stamped France and other Italy. The metal tenon in the shank reminds me very much of both a Grabow and a Medico pipe. The pipe photo I am including below has a similar style spacer and stem on a bowl that has the same style rustication finish. The description on the site is as follows:

RARE 1950s/60s KLEENEST … RARE 1950s/60s KLEENEST BRIAR Italy TOBACCO PIPEArmed with the information that I found online I turned my attention to the clean up of the pipe itself. I reamed out the remaining cake in the bowl with a PipNet pipe reamer and took the cake back to bare briar. I cleaned up the remnants in the bowl with a Savinelli Fitsall Pipe Knife. I finished the interior of the bowl with a piece of dowel wrapped in 220 grit sandpaper. The bowl looked very good with no damage or checking on the walls. I used a piece of 220 grit sandpaper to bring the bowl back into round. I cleaned off the rim top at the same time. It looked much better.

I scrubbed the externals of the bowl with a tooth brush and undiluted Murphy’s Oil Soap. I worked over the bowl and the rim top. I rinsed with warm water to remove the debris and the soap. Once I dried it off you can see that there were still remnants of varnish on the briar that I would need to remove. You can see the sparkles of varnish on the photos above. It is both on the smooth portion of the bowl and the rusticated portion. I wiped the briar down with acetone on cotton pads to remove the varnish coat and clean off the briar. With the varnish removed you can see the burn marks on the right side of the bowl and the shank. I dried it off and took photos of it at this point in the process. There is some nice looking grain around the bowl and the rustication is quite rugged. The clean bowl and shank looks very good. I cleaned the airway and mortise in the shank and the tube airway in the stem until they were very clean. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad to remove the grit. The bowl began to take on a rich shine. The briar took on a newer, richer look. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the briar with my finger tips and into the rusticated portion with a shoe brush. I let it sit for 10 minutes and the Balm did its magic. It enlivens, cleans and preserves the briar. It certainly brought this bowl back to life. I buffed it off with a clean cloth and took the following photos. I set the bowl aside and turned my attention to the stem. I “painted” the stem surface carefully with the flame of a lighter to try and lift the tooth marks. They lifted slightly. I filled in the marks that remained with clear CA glue. When the repairs cured I used a small file to reshape the button edge and flatten out the repairs. I sanded the repairs 220 grit sandpaper to blend them into the surface. I started the polishing process with 600 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I fit the stem with a paper Medico Filter in the metal tenon in the stem. It fit the tenon and into the shank and provided the smoker with a dry smoke.This Kleenest Imported Briar Filter Billiard is an interesting looking pipe now that it has been restored. The smooth portion of the finish highlights the grain and rustic portion gives a tactile sense to the pipe. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Kleenest Filter Billiard fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ¾ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: 7/8 of an inch. The weight of the pipe is 50 grams/1.76 ounces. I have one more pipe for this Eastern Canada Pipeman to work on. Once I have finished all three I will be sending them back to him to enjoy. Thanks for reading this blog and my reflections on the pipe while I worked on it.

An Interesting Clean up of a French Made Swiss Dry-Smoker Pot

Leave a reply

Blog by Steve Laug

The next pipe on my table was part of threesome sent to for work from a fellow in Eastern Canada. This one is a pot shaped one that on first glance I thought was a Peterson’s Shamrock. This morning when I brought it to the table and examined it I found that it was not a Shamrock or a Peterson Product at all. Rather, it is stamped on the left side and read Swiss [over] Dry-Smoker. On the right side it reads Algerian Briar [over] Made in France. The bowl had a light cake and there was some darkening on the back rim top and edge of the bowl. There was some peeling varnish on the exterior of the bowl and shank. There were also burn marks on the left side of the bowl toward the front and on the left underside of the shank. The bowl had several grey putty fills on the heel of the bowl and on the right side at the shank bowl junction. They do not look deep but they are present in the finish. The shank end has a nickel ferrule. Looking inside the shank and the bowl were two airway entries at the bottom of the bowl and twin aluminum tubes in the end of the mortise. The stem is vulcanite and has a faux P-lip with the exit of the airway at the end of the button rather than on top. There were tooth marks and tooth chatter on both side of the stem ahead of the button and on the surface. It is stamped with an S on the left side of the taper stem. I took photos of the pipe before I started my work on it. I took photos of the bowl and rim top to show what they looked like before I started my clean up. I also took some of the stem to show the condition of both sides. The stamping on the sides of the shank are shown in the photos below. They are clear and readable as noted above.I removed the stem from the shank and took a photo of them to show the perspective on the pipe. You can see the burn marks on the bowl and shank and the scratches and fills in the briar.I turned to Pipephil’s site to see what I could learn about the French made Algerian Briar, Swiss Dry-Smoker brand (http://pipephil.eu/logos/en/logo-s14.html). I found the listing there but little background information on it.I followed a link at the bottom of the listing to a section on the shape and design of the stem (http://pipephil.eu/logos/en/infos/p-lip-en.html). It is noted as a Swiss brand but is clearly stamped Made in France. I have included a screen capture of the section below.I googled the brand and found a discussion on Pipesmagazine.com about the Swiss Dry- Smoker (https://pipesmagazine.com/forums/threads/swiss-brand-pipes.1986/). In a thread there I found this information as well as a link to a Patent file.

Jun 27, 2014 I recently obtained a SWISS Dry Smoker myself. Its construction is along the line of the Peterson, however the “Well” is not like a Peterson nor the WDC Well System or the Kaywoodie/Yello Bole Chesterfield’s. It has what appears to be a brass tube with a slot that allows the moisture to be collected into it. This tube is aprox 1/8 diameter and seems to be about 3/4″ deep. The stem tip looks on the exterior like a P-Lip but the hole comes out straight and not towards the roof of the mouth.

More on this later with pics. I did find this Patent which may be related.
DRY SMOKING PIPE

I followed the Patent information link and found the application for a similar looking pipe from 1909. I am including that information and drawing below. (https://patentimages.storage.googleapis.com/54/b4/bd/6175f3f8539de1/US914498.pdf). I don’t believe the pipe I am working on is related to this one in other than the similar two air holes entering the bowl and the single brass line in the stem. The rest of the apparatus is not present in this pipe. Armed with the information that I found online I turned my attention to the clean up of the pipe itself. I reamed out the remaining cake in the bowl with a PipNet pipe reamer and took the cake back to bare briar. I cleaned up the remnants in the bowl with a Savinelli Fitsall Pipe Knife. I finished the interior of the bowl with a piece of dowel wrapped in 220 grit sandpaper. The bowl looked very good with no damage or checking on the walls. I scrubbed the externals of the bowl with a tooth brush and undiluted Murphy’s Oil Soap. I worked over the bowl and the rim top. I rinsed with warm water to remove the debris and the soap. Once I dried it off you can see that there were still remnants of varnish on the briar that I would need to remove. I wiped the briar down with acetone on cotton pads to remove the varnish coat and clean off the briar. With the varnish removed you can see the burn marks on the right side of the bowl and the shank. I used some 220 grit sandpaper to sand out the dark burn spots on the bowl and shank. I was able to significantly reduce them with the process. I sanded the darkening on the inner edge and the rim top to remove that damage. The photos of the bowl and shank to show the bowl at this point. I cleaned the airway and mortise in the shank and the tube airway in the stem until they were very clean. I filled in the shrunken fills on the bowl and shank with clear super glue. I set it aside for the fills to cure. Once it hardened I sanded them with a folded piece of 220 grit sandpaper. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad to remove the grit. The bowl began to take on a rich shine. The briar took on a newer, richer look. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the briar with my finger tips. I let it sit for 10 minutes and the Balm did its magic. It enlivens, cleans and preserves the briar. It certainly brought this bowl back to life. I buffed it off with a clean cloth and took the following photos. I set the bowl aside and turned my attention to the stem. I sanded out the tooth marks and some scratches in the stem sides with 220 grit sandpaper and started the polishing process with 600 grit wet dry sandpaper.I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This Made in France Algerian Briar Swiss Dry-Smoker Pot is a good looking pipe now that it has been restored. The finish both highlights the grain and hides the fills. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Swiss Dry-Smoker Pot fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ¾ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: 7/8 of an inch. The weight of the pipe is 50 grams/1.76 ounces. I have two more pipes for this Eastern Canada Pipeman to work on. Once I have finished all three I will be sending them back to him to enjoy. Thanks for reading this blog and my reflections on the pipe while I worked on it.