Tag Archives: buffing

Jen’s Trove #1: A Kaywoodie Author

Blog by Dal Stanton

Jenny has laid the groundwork for a pipe restorer’s dream job! Jenny has been working with us here in Sofia, Bulgaria, as an intern for the last few years and she will be transitioning back to the US at the end of the summer. She’ll be working with international students at what she considers her home territory at the University of Tennessee – Knoxville. We’ll miss her, but she has created a bittersweet gauntlet for me! She has gone through my baskets and boxes of ‘pipes-in-waiting for help’ that I have culled and collected to create a gift trove for the special men in her life when she returns to the US – brothers, brothers-in-laws, father…. She knows that the pipes I restore benefit our work with the Daughters of Bulgaria, women/girls who have been sexually exploited and trafficked throughout Europe. She wants to support the Daughters but also communicate this to her loved-ones in the US by gifting them pipes restored by The Pipe Steward – me 😊. Since the proceeds benefit the Daughters, the agreement we have is that after each pipe is restored from her trove, I will determine a price and she will then decide if she would like to ratify the purchase – a win/win/win all around – for her, her special men and for the Daughters. As Jen poked and prodded through my pipes, I learned that she was seeking a variety shapes and sizes so that each gift would be unique. I hope that I can run the gauntlet well by providing her precious gifts AND finish on time!!!

The first pipe I chose randomly out of the ‘Jen’s Trove Basket’ is a Kaywoodie Author shape. I saw this pipe on eBay and was attracted to the solid shape of the Kaywoodie ‘Ball’ shape that was advertised by the eBay seller in New Hampshire. Here is what I saw:When I looked at Pipedia’s Shape Chart put together by Bill Burney, I saw that the Ball and Author shapes are very similar, but Bill’s description of “The Author as a beefed-up prince, featuring a flattened ball-shaped bowl and a heavy 1/8 to 1/4 bent stem” caused me to classify this Kaywoodie as an Author. With the pipe now on my work table, I take more pictures to fill the gaps. This is the first Kaywoodie I’ve worked on. A plethora of information is available online about America’s oldest pipe making manufacturer. Kaywoodie’s website is informative:

The history of S. M. Frank & Co. spans nearly a century and half of pipe making, supporting our claim as the “oldest pipe house in America.” S. M. Frank, as it exists today, is a combination of some of the biggest names in pipe making from the early part of the 20th. century. The pipe names Kaywoodie, Yello-Bole, Reiss-Premier, DeMuth, Medico, Heritage and Frank are familiar to generations of pipe smokers.

The article describes how in 1919 the Kaufman Brothers & Bondy Company (KBB) produced the Kaywoodie and Dinwoodie pipe lines. By 1924 the Dinwoodie line fell by the wayside and the primary name of Kaywoodie was the mainstay pipe line and the company came to be known by that name. Little is known about the early activities of the KBB Company which started in 1851 by the German born Kaufman brothers. The company had several locations but was centered in the New York City region throughout its production history. The expansion of the KKB Company following the gold rush I find fascinating:

When one of the men from the New York office got “gold fever”, he carried a large supply of pipes with him to California that he sold along the way. This early “national distribution” did much to build the reputation of KBB. By the late 1800’s, branches of KBB were opened in Chicago, Atlanta, San Francisco and St. Louis with family and friends acting as agents. The trademarks, for the inlaid cloverleaf and the cloverleaf with the KBB initials inside, were issued in 1881.

In 1935, KBB boasted of being the largest pipe making facility in the world with 500 employees and a production of 10,000 pipes per day from their facility in West New York, New Jersey. In 1955, Kaywoodie was acquired by S. M. Frank & Co. (See Link) and continues to the present with well-known names Yello-Bole, Reiss-Premier, William Demuth Company, Medico, Heritage (Heritage Pipes Inc.), along with Kaywoodie (Link).

It is difficult to date the Kaywoodie before me. The only identifying marker is the traditional white shamrock on the stem. There are no other markings that I see. To the left, a 1964-65 Kaywoodie Dealer Catalog from Pipepages.com shows a remarkable likeness to the Connoisseur line and the Author before me with the stem shamrock on the side rather than on the top as in a 1955 Kaywoodie catalogue (See LINK). There is no clear indicator for dating the Kaywoodie Author, but this catalog may put me in the ballpark.

With a better understanding of the Kaywoodie name, I take a closer look at the Author. The good news is that the stem is in good shape with little tooth chatter. The classic Kaywoodie patented Synchro-Stem which boasts that “metal-to-metal contact prevents binding and sticking” from a 1955 catalogue. The stummel, however, is a different story. The rim is beat up significantly, and I detect what might be cracks in the stummel. Looking back at the eBay pictures provided by the seller, it made it very difficult to see what I seen now. There appear to be two cracks, across from each other on the front and on the back of the rim. I take a few closeups.

At this point, I’m not sure what I’m seeing. Are the cracks superficial or do the run deeply into the briar. It’s curious also that they seem to be opposites – perhaps part of the same trauma or what? I will need to clean the chamber and rim to see more clearly the depth of the problem. After spreading paper towel to minimize cleanup, I use the Pipnet Reaming Kit to work on the fire chamber. I use 2 or the 4 blades available, starting first with the smallest. I fine tune the reaming job with the Savinelli pipe knife then sand the chamber with coarse 120 grade sanding paper then 240 grade. I wipe the chamber with a cotton pad wetted with isopropyl 95% to clean the carbon dust. I take some close-ups of the chamber revealing some heat fissures and evidence that the crack seems to run through the bowl – especially the crack on the back-side of the bowl. I continue with the external cleaning using Murphy’s Oil Soap and cotton pads. I also employ a brass bristle brush to work on the rim which is really beat up and scorched. The cleaning reveals more of the damage to the rim as well as the cracks I will need to address. I’m guessing that the stummel cracks were caused by excessive heating of the briar. I decide to clean the internals of the stummel using cotton swabs and pipe cleaners dipped in isopropyl 95%. I also employ a straight needle file to scrape the walls of the mortise to dig out the gunk and tar. I like to take care of the dirty work before continuing with the externals. This also gives me time to think about how to approach the stummel repair. The pictures show the progress which is slow – the internals are really gummed up.

The day is coming to an end so I decide to employ a kosher salt and alcohol soak to make progress with the internals – while I sleep! I use kosher salt so not to leave an iodine after-taste. I stretch and twist a cotton ball to create a thinner ‘string’ of cotton to stuff down the narrow mortise opening through the metal plate of the Kaywoodie. This cotton string will act as a wick to draw out the oils. I then fill the bowl with kosher salt and cover the opening with my palm and give it a shake to displace the salt. Using a large eyedropper, I introduce isopropyl 95% to the bowl until it surfaces over the salt. I leave the stummel in an egg crate and turn the lights out – another day is done. The next morning, the salt/alcohol soak has done the job. The salt has discolored as well as the cotton wick. I dump the used salt into the waste basket, thumping the stummel on my palm. I wipe the chamber out with paper towel and using a long-bristled brush remove the excess salt from the internals. I then return to using cotton swabs dipped in isopropyl 95% to complete the cleaning. The pictures show the progress.

After sending an email off to Steve to get some advice on the stummel cracks and the stinger/tenon system of this older Kaywoodie, I put the stummel aside to work on the stem. I wasn’t exactly sure how the stinger on the stem which screws into the metal shank plate comes off – and off it must come if one is to adequately clean the stem – and keep it cleaned! Steve’s email was helpful with the question whether the stinger had 3 holes or 4 – 4 would indicate an older system according to Steve. Ok, another clue to the age of this old boy. I look and discover 4 holes on the end ball of the stinger which indicated to Steve that the stinger may be threaded and screws into the metal tenon. Taking a closer look, there does appear to be a seam marking the tenon and stinger contact point. Steve’s advice was to heat the tenon and twisting the stinger to release it. I take a couple of pictures to show what I’m seeing.Holding the stinger over a lit candle, after a few tests to twist, the entire tenon unscrewed from the stem. By the appearance of the seam, I’m thinking that the stinger will separate from the tenon and needs to be removed for ease of cleaning. With another quick note off to Steve, I’m cautious because I don’t want to damage the tenon and Steve has seen a few more of these than I! I clean the tenon with alcohol and a cotton pad and then follow this with 0000 steel wool to finish cleaning the tenon/stinger. To work on the oxidation of the stem I drop the stem into an OxiClean bath to let it soak for several hours. The pictures show the progress. After several hours, I retrieve the stem from the OxiClean bath. The stem shows little oxidation after the soak. Using 0000 steel wool I clear the layer raised by the OxiClean bath. Then, using pipe cleaners and long-bristled brushes, dipped on isopropyl 95%, I clean the internals of the stem. The airway is tight and I resort to the long-bristled brushes to push through the airway. After cleaning the airway, I want to alleviate some of the tightness of the airway by expanding the slot area. I use a pointed needle file and insert the point into the slot and carefully apply abrasive pressure to the edges of the slot. The pictures show the progress. The upper bit shows latent bite dents – the lower as well but much less. I use the heating technique to expand the vulcanite. With a lighted candle, I pass the end of the stem over the flame – in a back and forth motion, not allowing the stem to cook by holding it stationary over the flame. After a few passes, the idea came to my mind that while the vulcanite is pliable to insert a pipe cleaner in the airway to expand it a bit allowing pipe cleaners to pass through without as much fuss. The effort seems to work – both for expanding the vulcanite and the airway. There remains a ‘footprint’ of the bite dent, but not as much. Using 240 grit sanding paper I work the dents out on the upper and lower bit. Following the 240 grit paper, I use 600 grit and then finishing with 0000 steel wool. I reattach the tenon/stinger to the stem and clock it so that the stem tightens at the correct angle. I tighten the tenon one full turn less to make it easier to remove and therefore, much easier to clean the airway. I like the results – good progress on this nice-looking KW Author. The pictures show the progress. I turn my attention back to the stummel, and take a few more up-close pictures. The burn damage is significant and the chamber is out of round. Heat fissures are evident in the chamber and I’ve already noted the cracks in the stummel which track over the rim into the chamber. I can say with little doubt, this pipe was loved and used much by its former steward. Yet, he’s taken quite a beating. My plan is to fill the heat fissures in the fire chamber with a coat of J. B. Weld. With Steve’s input, I’ll drill back-holes at the terminus points of both fore and aft cracks to prevent further crack creep. I will fill each hole with CA glue as well as apply a penetration layer of CA glue over the path of the crack to seal the cracks. Before I start these repairs, I work on the external rim area with the goal of cleaning up the damage, re-balancing the stummel’s look as much as I can through a combination of topping and sanding. When the stummel starts looking human again, if this is possible, I will then again assess the cracks and their needs. All in all, the stummel’s undamaged briar is quite attractive – nice grain. I hope I can return this Kaywoodie up to specs so that Jen can be proud to gift this old boy to her men-folk! I start with a coarse sanding sponge to see what progress can be made. I follow by gently topping the stummel with 240 grit paper on a chopping board and then again return to the coarse sanding sponge to ‘reduce’ the edge of the topped stummel. What develops is a technique of gradually reshaping the rim area to give the stummel a more uniform look. I cycled through a light topping and then returning to the coarse sanding sponge several times. The pictures show the process. As the rim starts taking shape, the fact that the bowl is out of round becomes even more distinctive. To shape incrementally a truer ‘round’ I use a coarse 120 grit sanding paper rolled up and I sand the internal bowl at the point where the rounding was needed. I gradually work around the internal chamber wall careful not to lean to aggressively into beveling an angle on the internal rim at this point. I want to address first the unevenness in the walls of the fire chamber. After doing this, I move more toward the top of the chamber and then create an inner bevel which gradually helps to round out the rim. As I work on the internal sanding, I recycle as before, doing a gentle topping followed by the coarse sanding sponge to even and balance the whole. The pictures show this gradual process starting with the ‘unrounded’ bowl. While the completed shaping is not perfect, I’m pleased that the stummel has regained proportion with the removal of the damaged briar and the gradual shaping through sanding and topping. Looking very good at this point!Before I move forward finishing the stummel, I need to do the crack repairs. The first thing I do, with the aid of a magnifying glass is mark the terminus points of the forward and aft cracks on the stummel. The mark is made by creating a dimple using sharp dental probe. This helps to guide the drill point when I create the ‘back hole’. Using a 1mm sized drill bit mounted on the Dremel, I drill holes at the terminus points of the cracks. With a somewhat steady hand, the work is successful. With the ‘back-holes’ drilled I drop-fill the holes with CA glue using a toothpick, and sprinkle briar over the hole. I also apply a line of CA glue over the crack itself to strengthen the repair and seal the cracks. The CA glue I use is extra thin and will seep into the cracks – hopefully. I put the stummel aside for the night for the patches to cure. The pictures show the patch process.The next day, the patches have fully cured and I use a rounded and flat needle files to work on the ‘forward and aft’ cracks where the back-holes were drilled. When I bring the CA glue patch mound down to briar surface level, I use 240 grit sanding paper to smooth it further and to blend with the briar. Once this is completed, I again use the coarse sanding sponge and do a light topping to freshen the lines of the rim after the repair work. I then roll a piece of 240 grit paper and again freshen the rim’s internal bevel. The pictures show the progress. I proceed to smooth and blend the stummel by using a medium grade sanding sponge followed by a light grade sanding sponge. The picture shows these last two stages and I take pictures of the finished crack repairs. During the staining, I’ll seek to blend these further – especially the aft crack. At this juncture, I repair the fire chamber before continuing to the external stummel surface. Earlier I describe using J. B. Weld to coat the fire chamber, filling the heat fissures that had developed over years of use. The J. B. Weld compound will also provide a protective barrier against the heat. Later, I will coat the chamber with ‘pipe mud’ to provide a foundation for a new cake to develop to protect the chamber walls. The few times I’ve used J. B. Weld, I always mixed too much. I’ll try to moderate this time around. After cleaning the chamber with a cotton pad wetted with isopropyl 95%, I place equal parts of the J. B. Weld components on an index card – hardener and steel. The directions state that after mixing the two, one has about four minutes before they start setting. I insert a pipe clean into the draft hole to prevent the Weld mixture to plug the airway. I mix the components with a tooth pick then I place a dollop of the compound into the chamber walls. I use my pinky finger to spread the mixture evenly and pull out excess. After a bit, the mixture is setting up. I rotate the pipe cleaner out when the tackiness of the mixture has firmed up enough that it will remain in place. I set the stummel upright in an egg carton and let it cure overnight. The pictures show the process. Turning now to the stem restoration, I utilize a plastic disc I fabricated to protect the shoulders of the stem during the micromesh process. Using micromesh pads 1500 to 2400 I wet sand the stem, then follow with dry sanding with pads 3200 to 4000 then 6000 to 12000. After each cycle of three I apply a coat of Obsidian oil to the stem to revitalize the vulcanite. The stem looks good. The pictures show the progress. A new day has arrived in Bulgaria and I turn again to the stummel. All the major repair work is completed and I begin to prepare the stummel’s surface for a stain finish. Using 1500 to 2400 micromesh pads I wet sand the stummel. Amazingly, after this first cycle, I see what I did not see before – Kaywoodie [over] Standard nomenclature on the left side of the shank and what appears to be 13B on the right side. I take a picture to mark this – unfortunately, I did not see it sooner to avoid sanding in that area. Checking again with Pipedia’s Collector’s Guide to Kaywoodie Pipes, 13B is the shape number identifying this as an Apple. Looking at the catalogs in the same article, with the stem shamrock on the side, I’m feeling pretty confident identifying this pipe from the 1960s. I follow this by dry sanding using pads 3200 to 4000 and then 6000 to 12000. I never grow tired of seeing the grain emerge as the micromesh cycles do their magic. The pictures show the process. To encourage better blending by hiding the cracks and repairs, I use a mixture of Fiebing’s Dark and Light Brown Leather Dyes. I use 2 parts light to 1 part dark. I don’t want to go too dark and hide the beautiful grain that has emerged. When I look at the original hue of the Kaywoodie (the 1960s catalogs above I think is a pretty good guess regarding the age of this KW) leveraged toward the lighter hues – yet, I do want to mask the cracks. After mixing the dyes, I heat the stummel using a hot air gun to open the briar making it more receptive to the dye. With the stummel heated, using a cork in the bowl as a handle, I liberally apply the dye over the stummel surface. Following this, I fire the wet dye with a lit candle and the alcohol immediately ‘flames’ and burns off setting the stain. I repeat the same process a few minutes later. After the second firing, I put the stummel aside for several hours. The pictures show the staining process. Some hours later, I’m ready to ‘unwrap’ the fired layer to discover what the briar has done with the dye. Using a felt buffing wheel, I mount it on the Dremel and set the speed to the slowest. After purging the buffing wheel on the edge of the metal tightening wrench, using Tripoli compound I methodically begin removing the fired layer by not applying much downward pressure, and allowing the RPMs and the compound to do the work. When I complete the removal of the fired layer with Tripoli, I take a cotton pad wetted with isopropyl 95% and wipe down the stummel. I do this not only to blend the dye but also to lighten it. I then move to Blue Diamond compound. I use a cotton cloth buffing wheel mounted on the Dremel, increase the speed by one notch, and move in circular motions over the entire stummel – again, as with the Tripoli compound, I do not apply a lot of downward pressure on the buffing wheel but allow the RPMs and compound to buff up the surface. When completed with the Blue Diamond, I use a felt cloth to hand buff the stummel to remove compound dust before moving to the wax phase. The pictures show the compound process. Before finishing the external surface with carnauba wax, I apply a layer of ‘pipe mud’ in the fire chamber. This creates a layer to encourage the development of a carbon cake in the bowl. I use a mixture of sour cream and two 260mg capsules of activated charcoal powder. I mix the sour cream and charcoal powder with a wooden stick and then, after inserting a pipe cleaner through the draft hole, apply a dollop of pipe mud mix in the chamber. I then use my pinky finger to spread the mud evenly and draw out the excess. When finished, I put the stummel aside to let the pipe mud set up. The pictures show the mud process. With pipe mud set, I reattach stem and stummel. I mount a cotton cloth buffing wheel to the Dremel, set at speed 2, with the fastest being 5, and apply carnauba wax to the stem and stummel. After applying several coats, I switch the Dremel to a clean cotton cloth buffing tool and again buff the pipe. I do this to work in pockets of wax that were missed and to raise the shine. Following this, I hand buff the pipe with a micromesh cloth to raise the shine more.

This Kaywoodie Standard Author has turned out in classic form. I’m very pleased with results of the rim repair and the rich, ‘smoking jacket’ finish that masks the crack repairs. The Author has a solid presence in the hand as I hold it – a classic shape that will provide a new steward with several more years of service. As I mentioned before, Jen’s purchase of this Kaywoodie Standard Author benefits the work we do here in Bulgaria with women who have been sexually exploited and trafficked, the Daughters of Bulgaria. If you would like more information about my restorations check out The Pipe Steward. Thanks for joining me!

Cleaning up a Uniquely Shaped Savinelli Oscar Aged Briar 316KS

2 Replies

Blog by Steve Laug

Two pipes left to clean up from the estate sale pipe lot that my brother picked up. The first of them is a beautiful Savinelli. It is stamped on a smooth spot on the bottom of the bowl with the words – Oscar in script over Aged Briar. Next to that is the Savinelli S shield followed by 316KS over Italy. Looking at the pipe I am not quite sure what to call it in terms of the shape. It is an incredibly unique shape to Savinelli. The walls are flared like a Dublin, bowl short like a Pot and highly beveled and polished rim, this shape is beautiful. The rusticated finish on the Aged Briar is a lot like it is sandblasted over the top of the rustication. I looked up a similar pipe on smokingpipe.com and found the description there helpful. I quote it in full: “Somewhere in between a Pear, Dublin, and a Pot, there’s Savinelli’s signature “316” shape. It features a wide chamber perfect for enjoying the intricacies of more complex blends. Presented here in the rugged rustication of the Oscar Aged Briar line, it’s a handsome composition for a price that simply can’t be beat.” http://www.smokingpipes.com/pipes/estate/italy/moreinfo.cfm?product_id=183082 I looked up the Savinelli Shape Chart and copied it below. I circled the shape in red in the chart below. You can see it in the second column.Jeff took the first photo and the remaining ones on the black background. They show the condition of the pipe before my brother cleaned it.The top of the rim was in rough shape. The cake in the bowl had overflowed in lava on the rim top. It was thick and hard. It would be interesting to see what would be underneath once the bowl was reamed the rim top cleaned. The finish on the rest of the bowl was in excellent condition as can be seen in the second photo below. The next photos show the stamping on the bowl bottom as noted in the opening paragraph of the blog. The stamping was sharp and readable. The third photo shows the stamping on the top of the stem. It is the classic Savinelli Oscar shooting star. The stem showed the now familiar tooth chatter and marks that were on each of the pipes in this estate lot. There was some light oxidation on the surface of the stem as well.My brother did a stellar job of cleaning up the pipe. He reamed the bowl with the PipNet pipe reamer and took the cake back to briar. He scrubbed the rim top and the finish with Murphy’s Oil Soap and a tooth brush to clean out the debris and dust in the grooves of the finish. He was able to remove the buildup on the rim top and leave the finish intact. The stem was soaked in Oxyclean and the oxidation came to the surface. He cleaned out the inside of the mortise and the airway in the shank and stem with alcohol, pipe cleaners and cotton swabs. When I got the pipe it was clean. I took the following photos to show the condition of the pipe before I restored it. The next photo shows the crowned rim top. It was amazingly clean with no residue left behind from the lava build up that had been present before he cleaned it.I took close up photos of the stem surface on both sides. The tooth chatter and marks are more distinct on the underside of the stem at the button than those on the topside.I sanded the stem with 220 grit sandpaper to remove the oxidation and the tooth marks and chatter. It did not take too much sanding to remove all the damage and oxidation. I worked on it until it was clean. I rubbed the stem down with Obsidian Oil and let it soak in. I wiped down the area around the shooting star stamp with alcohol on a cotton pad and touched up the stamp with white acrylic paint. Once the paint dried I rubbed off the excess paint and left only the paint in the stamp itself.I polished the stem with micromesh sanding pads – wet sanding it with 1500-2400 grit pads. I rubbed it down with oil between each of the pads. I dry sanded it with 3200-4000 grit pads and rubbed it down with oil after each pad. I buffed the stem with red Tripoli on the buffing wheel and then finished polishing it with 6000-12000 grit pads. I gave it a final coat of Obsidian Oil after the 12000 grit pad and set it aside to dry. I put the stem back in place in the shank and buffed the bowl and stem lightly with Blue Diamond on the buffing wheel. I gave the stem multiple coats of carnauba wax and the bowl several coats of Conservator’s Wax. I buffed the pipe and stem with a clean buffing pad to raise the shine. I hand buffed the bowl with a shoe brush and then with a microfibre cloth to deepen the shine. The finished pipe is shown in the photos below. The dimensions of the pipe are Length: 6 inches, Height: 1 ½ inches, Outer diameter of the bowl: 1 ¾ inches, Chamber diameter: 7/8 inches. This contrast between the smooth, crowned bowl rim and the patch on the underside of the bowl are reddish brown and the contrast of the dark brown/black top coat over the reddish brown showing through give the pipe an intriguing contrast look. The bowl has been cleaned and the entire pipe is ready to smoke. I will be putting it on the rebornpipes store soon. If you are interested in adding it to your collection email me at slaug@uniserve.com or send me a message on Facebook. Thanks for looking.

Refurbishing an Iwan Ries Savinelli Made Black Knight 207

Cracked Shank Repair on a Dunhill CK12 Author

11 Replies

Blog by Henry Ramirez

Henry and I have been emailing back and forth on all things pipe repair and I have to say I enjoy each missive he sends me. He is a creative guy who is using his dentistry expertise to work on pipes. The kind of repairs he does and the equipment he has both built and gathered is unique and certainly adds some new ideas to the hopper for refurbishers like me. I don’t want to bore you with all kinds of introduction on Henry. I will let his restoration of this old Dunhill speak for itself. Welcome and thank you for your contribution Henry. – Steve Laug, rebornpipes

I’d seen this old pipe bought and sold several times on Ebay, each time gussied up a little more but still tap dancing around the issue of the split shank repair band. Being the sucker that I am for gnarly old patent Shell Dunhill’s, I decided that this was the perfect opportunity to see what was under the band and possibly date this old codger.

Using 10x’s loupes with a parallel headlight source, I sectioned the band to find, to my lucky surprise, NO CEMENT! Just popped off, pretty as you please with no clean-up necessary. I used a fine carborundum wheel to initially trough the metal and then finished with a sharp new #2 carbide round but in an electric lab hand piece by Kavo. The Kavo or less expensive Medidenta hand pieces are ergonomic and very smooth running when compared with dremels. I would not try such a procedure for fear of scaring the briar without a hand piece I fully trusted.The newly exposed underside of the shank was faintly stamped with an incomplete patent number starting with 116(989/17) which would place this pipe from 1925-1934. No closure here since the date stamp was completely sanded off when the band was fitted.I was also pleased with the stem’s sizing to the shank. Still there was enough of a suggestion of the shell finish to complement the rest of the pipe.The 8mm stem orifice leads me to think this was a filtered pipe.The usual chamber cake removal (different pipe). I also use drill bits by hand to router out the mortise to bowl.When I want to conserve the original briar’s finish, I plug the bowl with a cork after stretching a latex or nitrile glove over the rest of the pipe. I then snip the tip of one of the fingers and poke the shank through the finger and out the hole. I tie off the glove and scrub the mortise and shank submerged in a Tupperware container filled with 91% isopropyl alcohol or vodka. Black muck floats out with every agitation of the shank brush.Drilling the micro-pin channel across the fissure. Once threaded into place, the pin shears off and the driver/carrier is removed. Of course I want the pin in the center of the thickest part of the shank through which the crack runs.The X-ray below shows not only the pin but also some of the composite plug. The composite plug was done at the end of the crack to prevent propagation.Pin hole back filled with black CA. Also spread some for aesthetic purposes on the composite plug. The stem was then buffed with four of pumice, Tim West’s green & red abrasive bars, White Diamond, Bendix plastic polish, Paragon wax and then a clean wheel and micro fiber towel. The bowl rim was gently micro-etched (Danville sand blaster) and polished with a Robinson bristle wheel brush. Luckily, the pipe was dark in general and the wax darkened the rim so that it blended. I flamed the wax to melt it into the rustications and buffed using a shoe polish brush supported by the bench pin. I ozonated the pipe for a night to remove any ghosting.Hope I don’t bore you with my Magnificent Obsession of resurrecting old pipes with the tools at hand. BTW, the light spot on the shank is an artifact of my flash. I’m going to deep six my crummy point and shoot and use my iPhone camera now that my MacBook can again see it as a drive. If you’re having the same problem, download Sierra operating sys from Apple for free.

Yours faithfully, Henry.

A difficult trust: Gift of a Grandfather – A BBB Double Star Made in England

11 Replies

Blog by Dal Stanton

When I study the venerable pipe on my work table, it is not a glamorous display of briar and silver bands. Some might call it a basket pipe. The two stars imprinted on the shank were an indication of a working man’s pipe – not high quality, but among those pipes accessible to normal, if not common, people who work, live, love and as is the case with us all, die. This unremarkable Apple shaped, BBB [diamond over] Double Star, MADE IN ENGLAND [over] 152, is remarkable because of the story it represents. I enjoy restoring ‘estate’ pipes because they were left to others and these pipes carry with them stories and memories of loved ones who once befriended and valued them. Greg heard from my son, Josiah, who are college buddies, that Josiah’s old man (my words not theirs!) restored ‘old’ pipes. This ‘old’ pipe came to Greg from his grandfather through his mother. Josiah’s email came to me asking what I could do with these pictures from Greg. My understanding is that Greg was a bit reluctant at first to send his pipe off to Bulgaria to be restored, but after Josiah directed him to some of the restorations I’ve done, he felt he could trust me with the heirloom that had come to him. Knowing that this pipe was from his grandfather I asked that Greg send me information about his grandfather so that I not only could place the pipe better in history, but Greg’s grandfather as well. This is the letter he sent me:

Hi Mr. Stanton,

Thank you so much for agreeing to restore my grandfather’s pipe. I am sorry for the delay in getting you the below information, but it’s been a crazy couple of weeks.

My mother inherited the pipe from my grandfather when he passed away in 1998. I saw it in the china cabinet one day and asked her if I could have it, since I had taken up pipe smoking. She kindly agreed. She doesn’t really know when my grandfather got the pipe, but she said he must have bought it in Hong Kong.

My grandfather was from Hong Kong, and only emigrated to the United States in the 1980s. He was a malaria inspector for the Hong Kong government for his entire working career. He must have gotten the pipe at the latest in the late 1940s or early 1950s, as my mother remembers him having it when she was a child. He never smoked the pipe when I knew him, but from its condition, I assume it was well used at an earlier period in his life.

Having graduated from the University of Georgia Law School in Athens, Georgia, passed his bars and currently serves as a law clerk to a federal magistrate judge in Augusta, Georgia, AND as a young married man, I can understand why Greg “took up” smoking pipes! Pipes are wonderful companions for blooming attorneys! His letter concluded with an agreement to the cost of the restoration would benefit our work with the Daughters of Bulgaria! Thank you, Greg!

The information Greg received from his mother was invaluable for placing this BBB in time and space. Pipedia’s article about BBB is helpful. BBB in the mid-1800s originally stood for “Blumfeld’s Best Briars”, but after the death of Blumfeld, the Adolph Frankau Company took over the company and BBB gradually became “Britain’s Best Briars”.

The “BBB Two Star” rating also is referenced in the same article in a discussion of quality descriptors for BBB pipes:

In the Thirties, the top-of-the-range one becomes “BBB Best Make” with alternatives like “Super Stopping” and “Ultonia Thule”. The BBB Carlton, sold with the detail with 8/6 in 1938, is equipped with a system complicated out of metal, system which equipped the BBB London Dry too. Blue Peter was not estampillées BBB but BBB Ultonia, and the BBB Two Star (* *) become the bottom-of-the-range one.

When Greg’s pipe arrived in Bulgaria, thanks to a visitor’s willingness to carry it across the Atlantic and European continent, I unwrapped it and put it on my work desk and took these pictures to fill in the gaps. At PipePhil.eu an example of the BBB Two Star marking is pictured along with the stinger/tube style extending into the chamber as Greg’s grandfather’s BBB does ( as seen above).In Pipes Magazine, I found a thread discussing the dating of the BBB Two Star. One threader’s opinion, ‘jguss’ corroborates Greg’s mother’s recollections:

My guess is that the Two Star line started at the end of WWII; the first mention I’ve found so far is dated 1945, which at least gives a tpq (that is, an approximate dating). I know the line lasted at least into the early sixties.

It is not too difficult to speculate about the provenance of Greg’s pipe. During WW2, briar became a scarce commodity throughout Europe and pipe manufacturing companies made do with what they could acquire. Two Star BBBs would be lower end but more than likely during this time, a very close second when rations were short. Added to this backdrop is the origin of our story in Hong Kong. Hong Kong, a British holding since 1841 (see LINK), lost control of Hong Kong during WW2 to Japan in 1941 during the Battle of Hong Kong. Undoubtedly, Greg’s grandfather would have experienced this first hand. When Japan unconditionally surrendered in 1945, the British regained control of Hong Kong, but to counter Chinese pressures to control Hong Kong, reforms were introduced that broadened and increased the stake of local inhabitants of Hong Kong:

Sir Mark Young, upon his return as Governor in early May 1946, pursued political reform known as the “Young Plan“, believing that, to counter the Chinese government’s determination to recover Hong Kong, it was necessary to give local inhabitants a greater stake in the territory by widening the political franchise to include them.^[19] (Link)

During the years following the Second World War, the same article describes unprecedented economic development which resulted in the economic powerhouse that Hong Kong became. This period would have been while Greg’s grandfather was working as a malaria inspector for the government of Hong Kong and during which he acquired this BBB Two Star. The smaller Apple shape would have served him well as he performed his inspection duties but given the ‘stem forensics’ pictured above, he probably chewed on it a bit as well while he worked!

With a greater sense of the story that this BBB Two Star tells, from England, to Hong Kong, to America, and now to Bulgaria, I’m anxious to restore this precious family gift from Greg’s grandfather. At Greg’s request, he’s hoping for a pipe that is as good as new and ready for a new lifetime of service. Yet, with all restorations, undoubtedly there will be some marks and blemishes remaining – these an ongoing testament to the memory of those who those who went before.

The first order of approach is with the stinger. When the pipe arrived, the stinger was already separated from the stem. The stinger extends from the stem through the mortise into the chamber itself through a metal tube air draft hole. Using a pair of plyers, I wrap a piece of cloth around the end to pull gently to dislodge the stinger from the mortise. I can see in the mortise that there appears to be a metal sheath that the stinger is lodged in – at least, that is what it appears to be. The stinger is not budging and I do not want to break the stinger off. To try to loosen things up, I pour some isopropyl 95% in the chamber to allow it to soak into the draft hole. Hopefully, in time, this will loosen the stinger. The alcohol soak did not work. In fact, a few weeks have transpired since writing the words above. This stinger has given me quite the challenge. In the back of my mind constantly, is the concern that I not leverage too much pressure pulling on the stinger. I’m concerned about damaging the shank. After soaking the internals for some time with alcohol, I pulled with plyers hoping to break the grip. I also attempt heating the stummel with a heat gun in hope of dislodging the stinger. I also heat the protruding part of the stinger with a candle, hoping that this would break the bond. It did not. I also was concerned about the candle flame close to the briar while trying to heat the stinger. I craft a tinfoil shield, but this was not successful. Unfortunately, I singed the end of the shank and had to remove the damage by ‘topping’ the shank end, which leads to a bit of work lining up the stem and shank later. As you might expect, the protruding end of the stinger did not hold up under the pressure and eventually broke off. After the stinger protrusion broke off, and after a second email to Steve for input, I’m at the point of using a drill bit in another attempt to remove the bonded stinger. Starting with a very small bit, I hand turn the bit to allow the drill to find the center of the stinger and gradually, remove the stinger introducing the next larger drill bit. The end of the broken stinger begins at about 1/4-inch-deep into the mortise. Unfortunately, this method is not working either because the drill bit will not bite into the metal and remain straight. At the end of the stinger slot that I’m boring into with the drill bit, my efforts are flummoxed by the stinger’s design. It has a slanted metal airflow deflector that causes the drill bit to veer off mark. After breaking the end of the drill bit in the slot (ugh!), and digging it out with needle nose pliers, I sit and begin to think I was facing failure. Nothing was working. I’m introducing more problems to the restoration as I try unsuccessfully to solve the stuck stinger problem. I can’t move forward and I’m stuck and begin to compose an apology letter to Greg in my mind. UNTIL, on a fancy, I insert a small flat head screw driver into the slot at the end of the broken stinger 1/4-inch-deep in the mortise and I twist it gently counter-clockwise, and it snaps. Suddenly, it was loose and I easily extract the ‘middle’ of Grandpa’s old stinger – I’m sure he was the last one to see this artifact! I see daylight through the mortise and I’m hoping that it might also be a metaphoric ‘light at the end of the tunnel’! I’ve not forgotten that the other end of the stinger remains lodged in the draft hole tube at the foot of the chamber. Thankfully, a larger drill bit was the perfect size and it reaches into the mortise and hand turning the bit, it clears the rest of the stinger shrapnel. Finally! Oh my…. I’ll be saving the stinger debris for Greg. This BBB will continue without difficulty stingerless. The pictures show the results. In the interest of full disclosure, these words are coming weeks after. Why the hiatus? Life’s normal twists and turns, work, some wonderful travel to Crete for an organizational conference, to Athens (not in Georgia) for a consultation on the Eastern Orthodox Church, AND my growing frustration with Greg’s grandfather’s pipe’s restoration as more complications arrived! I’ll try to catch you up to the present:

With the stinger removed, I was anxious to continue the restoration with a ‘normal’ pattern – the stem goes into the Oxi-Clean bath to deal with the oxidation in the stem. After some hours, the stem is removed from the bath and I wet sand with 600 grade sanding paper removing the raised oxidation followed by 0000 steel wool. To clean and protect the BBB stamping on the stem, I use a non-abrasive Mr. Clean ‘Magic Eraser’ sponge. The pictures show the progress.The next step is to re-seat the tenon into the mortise. After the arduous process of removing the stinger, and after singing the shank end with a candle flame, and after ‘topping’ the shank to remove the damaged briar, the tenon and mortise needed to be re-wedded with the new realities. The tenon was too large for full insertion into the shank. Using a combination of reducing the tenon size with sanding paper and steel wool, sanding and filing the throat of the mortise, and using a rounded needle file to cut a new internal mortise openning bevel to accommodate the broader tenon base, I patiently, slowly, methodically worked to re-seat the tenon in the mortise which included working and then testing the new fit – GENTLY! I suppose the fact that I said to myself, ‘Dal, careful, don’t crack the shank’, at least a 1000 times only made the sinking feeling more intense when I heard the sickening sound during what proved to be my last, ‘gentle testing’ of the tenon inserted into the mortise. The hairline crack is pictured below that I took only a day ago – I couldn’t bear to take it then, when it happened. I was sickened and put Greg’s pipe aside. I needed some time to work through my own sense of failure of the trust given me to restore this family heirloom. Now, after several weeks, I’ve regrouped and have taken up Greg’s pipe again. The travels that I described above during this time in some ways felt more like Jonah running from Nineveh not wanting to face the scene of his calling and his sense of failure! Though, my trip did prove beneficial – I sold some of my finished pipes to colleagues to benefit and raise the awareness of the Daughters of Bulgaria that The Pipe Steward supports. I’ve included my Nineveh travels below for you who may not be familiar with ‘my world’, the Balkans – Sofia to Crete to Athens and back. Before moving forward, I needed to repair the cracked shank. With the help of a magnifying glass, I locate the terminus of the crack and mark it by creating an indentation with a sharp dental probe. The arrow to the left below marks this. Using the Dremel tool, I mount a 1mm sized bit and drill a hole at that point – but not going through! This hole acts like a controlled back-fire to stop the progress of a forest fire. This will not allow the crack to continue creeping. With the use of a toothpick, I spot-drop Hot Stuff CA Instant Glue in the hole and along the line of the crack which I expanded microscopically by partially inserting the tenon into the mortise. This allows the CA glue better penetration to seal the crack. I remove the stem immediately after the application of CA. With the CA glue still wet, I apply briar dust to/in the hole and along the crack to encourage better blending. The pictures show the progress. After some hours allowing the CA glue to cure on the shank repair, using a round grinding stone bit mounted on the Dremel, I reestablish an adequate and uniform internal bevel on the end of the shank to accommodate the base of the tenon when it is fully inserted into the mortise. My theory is this is what caused the crack – lack of a sufficient internal bevel giving room for the slightly enlarged tenon as it merges with the stem proper. With the Dremel engaged at the slowest setting, I’m careful to apply minimal pressure as I rotate the ball a bit to make sure it’s centered. It looks good – the pictures show the progress.Due to a lapse of sorts and the intensity of my focus on re-seating the stem again without re-cracking the shank, I failed (or perhaps, had little desire) to take any pictures. The short of it is, the stem and stummel have been reunited after some difficult times. Also, not pictured are some of the basic steps: reaming the fire chamber of carbon cake buildup, cleaning the internals of the stummel and stem with cotton swabs and pipe cleaners wetted with isopropyl 95%, and cleaning the externals of the stummel with Murphy’s Soap. Again, picking up the trail, pictured below is the micromesh pad process with the stem. Using pads 1500 to 2400, I wet sand the stem, followed by dry sanding with pads 3200 to 4000 and then 6000 to 12000. I follow each cycle with an application of Obsidian Oil to revitalize the vulcanite. The stummel surface shows quite a bit of pitting in the first picture shown again below. The rim also shows nicks. On the larger pits shown below on the heel of the stummel, I spot-fill with a toothpick using CA glue and shorten the curing time by using an accelerator spray on the fills. After filing and sanding the fills to the briar surface, using a progression of 3 sanding sponges from coarse, medium to light, I work out most the remaining pitting over the stummel surface. Using 600 grit paper on the chopping block, I also give a light topping to the rim to remove nicks and create fresh lines for the rim. Following the topping, I introduce an internal bevel to the rim, first using a coarse 120 paper rolled tightly, then with 240 and 600. The internal rim bevel to me, always adds a touch of class but also helps create softer lines which enhances this Apples shape. The pictures show the unhindered progress! I now take micromesh pads 1500 to 2400 and wet sand the stummel followed by dry sanding with micromesh pads 3200 to 4000 and then 6000 to 12000 taking a picture after each set to mark the progress. I am careful to guard the BBB nomenclature on the shank sides. As I move through these cycles, I realize that I have been so wrapped up in the technical aspects of this restoration for Greg, that I failed to see the beauty of this diminutive Apple shape. The grain that emerges from Grandpa’s old timer is truly beautiful. Flame grain and swirls, with a few bird’s eyes accenting the whole – totally eye-catching for a Two Star sub-mark BBB I would say! To see the big picture to help determine the next steps, I reunite stem and stummel and stand back and take a good look. This BBB Made in England is looking real good – in spite of everything! I can see by the way the BBB Apple naturally sits on the surface, leaning slightly like a listing ship, but remaining upright, provides some clues regarding the significant pitting on the heel of the stummel – just off center. Greg’s grandfather undoubtedly and conveniently placed his pipe on a table or counter surface, or perhaps on a nearby crate, as he made his rounds as a malaria inspector for the province of Hong Kong. The original BBB coloring leaned toward the favored darker hues of English pipe makers and client proclivities. I decide not to go that dark, but to stain the stummel using a light brown base with a touch of dark brown to tint it down that track a bit. This will make for better blending, especially for the darker briar around the nomenclature on the shank. Using Fiebing’s Light Brown Leather Dye as the base, I add a touch of Fiebing’s Dark Brown. Using a folded pipe cleaner in the shank as a handle, I begin by warming the stummel with a hot air gun to expand the briar making it more receptive to the dye. After heated, I apply the dye mixture to the stummel generously aiming for total coverage. I then fire the wet stummel with a lit candle igniting the aniline dye, burning off the alcohol and setting the pigment in the grain. After a few minutes, I repeat the process concluding with firing the stummel. I put the stummel aside to rest for several hours. The pictures show the staining process – yes, you can see my blue fingers – I’ve started wearing latex gloves when I’m staining. After some hours, I’m looking forward to ‘unwrapping’ the fired stummel to reveal the stained briar beneath. Using a felt buffing wheel mounted on the Dremel, set at the slowest speed, I use Tripoli compound to remove the initial layer. Moving in a methodical, rotating pattern, I work my way around the stummel not apply a great deal of down-pressure on the wheel, but allowing the RPMs of the felt wheel and the compound to do the work. After removing the crusted layer with Tripoli, I wipe the surface with a cotton pad wetted with isopropyl 95%. I do this not so much to lighten the finish, but to blend and even out the stain over the surface. Following this, I mount a cotton cloth wheel on the Dremel, increase the speed slightly, and apply Blue Diamond – a slightly less abrasive compound. After both compounds, I use a clean towel to hand buff the stummel to remove excess compound dust before applying the wax. Pictures show the progress. Reattaching the stem and stummel, I apply several coats of carnauba wax to both. Using a cotton cloth wheel, I set the speed of the Dremel to 2 with 5 being the fastest, I apply the carnauba and I like what I see. With the carnauba wax applied, I mount a clean cotton cloth buffing wheel on the Dremel and again buff the stummel and stem. Finally, I apply a rigorous hand buff using a micromesh cloth to raise the shine more.

This BBB Double Star Apple has come a long way from England to Hong Kong to the US to Bulgaria, and now it’s ready to return to its new steward. This restoration was a bit bumpy, but then, so is life. I’m glad to help give this pipe a new lifetime and I hope Greg not only enjoys it, but that it provides a special connection with his past. I’m sure Grandpa would be proud. Thanks for joining me!

Refreshing a Nording Hand Made Freehand Pipe

2 Replies

Blog by Steve Laug

One of the most unusual pipes in the estate pipes that my brother Jeff purchased and sent to me recently was a freehand that is stamped on the underside of the shank with the words NORDING over MADE IN DENMARK. The plateau on the top of the bowl and the end of the shank is black in colour and is rough to the touch. It is a nice contrast to the cherry and brown stain of the rest of the bowl and shank. The smooth portions are stained with a contrast of a dark stain and a red cherry stain. The contrast is very beautiful and makes the grain pop. The stem is a nicely turned freehand style stem. There is a barrel at the end of the tenon that has several turns that make it look barrel like. There is then a pinched area above the barrel and then a tapered stem.The plateau on the rim and the shank end were dirty with dust and grime. The smooth portion of the bowl and shank was grimy but undamaged. There was also no damage to the plateau portions of the bowl. There was a light cake in the bowl. My brother took the photo above and the rest of the photos that follow to show the condition of the pipe when he brought it home.He took some photos from a variety of angles around the bowl to show the grain that covered the bowl sides, bottom and the shank sides, top and bottom. The last photo shows the Nording over Made in Denmark stamping on the underside of the shank. He took some close up photos of the rim top to show the condition of the plateau. It was undamaged but dirty. You can see the condition of the cake in the bowl in these photos.The stem was oxidized and had the now familiar tooth chatter and tooth marks in the vulcanite on both sides near the button. They were also on the top and bottom sides of the button.My brother did his usual good job cleaning the inside and the outside of the pipe. He reamed it with a PipNet reamer and cleaned out the mortise and the airway in the shank and the stem. He scrubbed the finish with Murphy’s Oil Soap and a tooth brush to clean out the dust from the plateau on the rim and the shank end. He scrubbed the stem as well. The pipe was impeccably clean when it arrived in Vancouver. I took the following four photos to show the condition before I finished the restoration. I took a close up photo of the rim top. There were some spots on the rim that needed to be touched up with black stain. The bowl was very clean.The next two photos show the stem on both sides. The oxidation is more evident on the top than the bottom. The tooth chatter and tooth marks are on both the top and the bottom of the stem near the button.I touched up the spots on the rim top with a black Sharpie pen and then waxed the plateau on the rim and the shank end with Conservator’s Wax and buffed it with a shoe brush to raise the shine.I lightly buffed the bowl with Blue Diamond on the buffing wheel and hand polished it. I took photos of what the bowl looked like at this point in the process. I laid the bowl aside and worked on the stem. I sanded the stem with 320 grit sandpaper to break up the oxidation on the surface. I worked the sandpaper into the grooves in the tenon end of the stem. The oxidation still remained but it was much softer and closer to the surface.I wiped the stem down with some Obsidian Oil and then cleaned out the airway in the stem and cleaned the airway in the shank and the mortise at the same time. The interior was very clean so it took no effort to clean it out.I polished the stem with micromesh sanding pads – wet sanding with 1500-2400 grit pads and starting the process of polishing it. I rubbed it down with Obsidian Oil and then took it to the buffer and buffed it with red Tripoli. I worked on all the rings and surfaces of the stem with the Tripoli and the wheel to remove more of the oxidation. I polished it more by dry sanding it with 3200-1200 grit pads to further remove the oxidation and bring the shine to the surface. I gave it several more coats of Obsidian Oil and set it aside to let the oil be absorbed in to the vulcanite. I buffed the finished pipe with Blue Diamond polish on the wheel carefully avoiding the plateau areas. I polished the minute scratches out of the sides of the bowl and from the surface of the stem. I gave the smooth portions of the bowl and shank and the stem multiple coats of carnauba wax and buffed it with a clean buffing pad to raise the shine. I hand buffed the entire pipe with a soft microfibre cloth to deepen the shine. The finished pipe is shown in the photos that follow. It is a beautiful piece of briar and the stains on the plateau portions and the smooth provide a good contrast. The plateau portions and the black of the vulcanite stem highlight the dark striations of the grain on the bowl sides. The dimensions of the pipe are Length: 7 inches, Height: 2 inches, Diameter of the outer bowl: 1 ¾ inches, Chamber diameter: 7/8 inches. This pipe is available to any of you who want to add it to their collection. It is just a bit large for my liking or I would keep it myself. I will post it on the rebornpipes store shortly. Send me an email to slaug@uniserve.com or a private message on Facebook. Thanks for looking.

A Beautiful Italian Hand Made DiMonte Classica 991

2 Replies

Blog by Steve Laug

The next pipe in the lot that my brother picked up at the latest estate sale is stamped DiMonte on the left side of the shank. On the right side it is stamped Classica and next to that Hand Made in Italy. The pipe is a beauty. It is a natural or light tan coloured briar with a Lucite stem. There is a mottled yellow acrylic insert on the stem that separates the black of the Lucite from the natural colour of the briar. The shape is an acorn with an under-slung stem. My brother took photos of the pipe before he cleaned it and sent them to me. He sent some close up photos of the bowl rim and top along with photos of the bowl sides to give a clear picture of both the condition of the pipe and also the beautiful grain that flowed with the shape of the bowl. The rim top had some overflow from the cake in the bowl. It covered most of the inner edge of the bowl and extended on to the rim top. There is a great combination of birdseye on the sides of the bowl and cross grain on the front and back. There are a few very minute sandpits in the briar that in no way detract from the beauty of the pipe. The next photo shows the stamping on the right side of the bowl and gives a clear picture of the look of the stamp.The next two photos show a bit of the stamping on the left side of the shank and the underside with the shape number 991. The mottled yellow acrylic stem insert is also shown in the photos.Like the other pipes in the lot from the estate sale the stem had a lot of tooth chatter on the stem near the button on both sides and also some wear on the edge of the button itself. The slot in the end of the stem was in really good shape and was well formed.I knew nothing about the DiMonte brand. My first thought was it was an Italian Hand Made pipe somewhere between Savinelli and Castello. The quality of the craftsmanship and the hand made stem and briar work made me think that it was more toward the Castello side of the scale. This is a beautiful pipe. I did some searching on the web and found a link to a post on alt.smokers.pipes. It was a response to a fellow who posted a question about the brand. I have included the link to the thread as well as the informative response regarding the history of the brand and its place of origin. Here is the link: https://pipesmokersforum.com/community/threads/info-on-this-pipe-brand.20964/

Hello Pappy, here’s a bit of information that I found from an alt.smokers.pipes post in 02/10/2003 that reads:

DiMonte was originally Arlington Briar Works, a pipe factory in New York. It went out of the pipe-making business, and sold off its machinery, I think in the 1970s. Maybe later. Mark Tinsky could probably give you an accurate date on when, if that is of concern.

Recently (2003), the family has decided to get back into pipes, and has been having them made under contract in Italy and importing them. The few I have seen so far seem to be good value for the money, but nothing to rave about. I have one. Wood is good, combustion chamber and shank both properly drilled, good quality mouthpiece. Some of the digits in the nomenclature look as if stamped by a dyslexic (and perhaps were — upside down 8, other minor things), and the finishing touch in fine details was not apparent in all instances.

If you find one and like it, I would expect it to be a good smoker. But if you worry about nit-picks, examine the pipe carefully before buying. You might find some…

One more comment: The old pipes from Arlington Briar Works that I have picked up at estate sales have been of lesser quality wood and a touch on the small side, but craftsmanship and attention to detail was great. The new pipes from Italy have better wood, size is generally larger (better, for me), but attention to detail is not always what it might be. As smokers, I rate the newer ones higher, because wood is so important, but in fit and finish things ain’t what they used to be…”

It appears when Arlington attempted to re-enter the pipe market, they contracted with an unknown Italian outfit, who manufactured these pipes under the DiMonte label. However, Arlington once again soon went out of business.

However, I’m sure there must be some knowledgeable pipers here that may have more information for you. Hope this helps you a smidge more…

When I brought the pipe to my work table I took the next four photos to show the condition of the pipe when I received it. My brother had done a great job cleaning up the bowl cake and the overflow on the rim. The rim surface was clean and smooth. He did a thorough cleaning of the internals of the pipe. The next close up photo shows the inside of the bowl and the cleaned and restored rim top.The stem was clean but it had a lot of tooth chatter on both sides of the stem that would need to be sanded out.I sanded out the tooth marks and reshaped the button edges with 320 grit sanding pads and was able to remove all of the chatter and the marks. Fortunately they were not too deep in the Lucite so sanding them out was quite simple. I sanded them without damaging the profile of the stem.I ran a pipe cleaner through the mortise and the airway in the shank and stem. The airway was very clean.I polished the stem with micromesh sanding pads – wet sanding it with 1500-2400 grit pads to remove the scratches and dry sanding with 3200-12000 grit pads. I wiped the stem down with a damp cotton pad after each grit to remove the sanding dust. Each successive grit of pad brought more of a shine to the surface of the Lucite. I put the stem back in place in the shank and buffed the pipe with Blue Diamond on the buffing wheel. I gave the stem and bowl multiple coats of carnauba wax and buffed it with a clean buffing pad to raise a shine. I hand buffed it with a microfibre cloth to deepen the shine. The finished pipe is shown in the photos that follow. It is a beautiful pipe and that fits well in the hand and the mouth. The draught on the stem is open and flowing. The briar is lovely and a rich patina will develop as it is smoked. The dimensions of the pipe are: length 6 inches, height 2 inches, outer diameter 1 5/8 inches, chamber diameter 3/4 inches. It should provide a great smoke for whoever adds it to his/her collection. I will be posting the pipe on the rebornpipes store soon. If you are interested in purchasing it email me at slaug@uniserve.com or send me a private message on FaceBook. Thanks for looking.

New Life or an Oval Shank Whitehall Saratoga Dublin

Restoring an Unstamped Rhodesian Handmade

3 Replies

Blog by Steve Laug

When I saw this pipe that my brother picked up I was captivated by the grain. The unknown maker had done an amazing job of laying the shape out with the grain. The sides of the bowl and shank have stunning flame grain radiating from the point at the heel of the bowl. The heel and the cap on the bowl, as well as the top and the pointed bottom edge of the shank have beautiful birdseye grain. He sent me the following pictures to whet my appetite for this pipe. I like the Rhodesian shape and I like the combination of nice grain, a sterling silver band and a black vulcanite stem. This one had them all. The only oddities to me were the shape of the shank – it was an egg shape, pointed at the bottom and the freehand style panel stem. The bowl had a thick cake in it and it was scratched at about 11 o’clock in the photo below. It looked as if it could have been cracked but it was not once he had reamed it free of the cake. The finish was dirty and there was some darkening/burn marks on the back side of the cap. It appeared to me that it was originally a virgin finish but I would know more once I had it in Vancouver and had cleaned up the finish.The next two photos show the grain on the sides of the bowl and the bottom. There is birdseye toward the left side of the bottom of the bowl curving up to meet the grain on the sides.Underneath the oxidation and tarnish on the band it was stamped Sterling Silver in an arch. The stamping was centred on the top side of the shank.The stem was heavily oxidized and had tooth chatter on both sides near the button. On the underside of the button there were deep tooth marks and one of them was on the button. The chair leg style stem would be a challenge to clean up.My brother did his usual comprehensive clean up on the pipe. He was able to remove all of the cake in the bowl and on the rim. He cleaned up the dirty finish on the bowl and cleaned out the mortise and the airway in the shank and the stem. The stem was more oxidized from his cleanup but the oxidation was on the surface so it would be a bit simpler to work on. The next four photos show what the pipe looked like when I brought it to the work table. There was some rim damage on the back side of the bowl. You can see it in the photo below. There was some burn damage as well as some bad nicks in the burned area. The outer edge had been flattened at that point and would need to be reworked. I took close up photos of both sides of the stem to highlight the tooth marks and chatter on them. There were three sandpits on the bottom of the bowl. The first was on the right side and was the largest of the three. The second and third were on the opposite side and were mere pin prick flaws. I filled in the holes with clear super glue. When it dried I sanded it with a piece of 220 grit sandpaper and then with a medium and fine grit sanding sponge to blend it into the surrounding briar.I topped the bowl on a topping board with 220 grit sandpaper to smooth out the damaged rim and ready the back side for a repair. I was pretty sure that if I topped it most of the damage would be remedied and the burn mark would disappear. Fortunately it was not deep in the briar so the sanding took care of it. Once I had it smooth I sanded it with the medium and fine grit sanding sponge.I wiped the bowl down with alcohol on a cotton pad to remove any remaining oils and dirt on the on surface of the briar. The next set of four photos show the cleaned surface of the briar. I polished the briar with micromesh sanding pads – wet sanding it with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. The photos below tell the story of the polishing and interestingly the ring grain in the briar begins to show through by the polishing with the three final pads. I rubbed the polished briar down with a light coat of olive oil to highlight the grain and make it stand out. A little olive oil brings new life to the dry briar. This pipe truly has some stunning grain as is evident in the following photos. I sanded out the tooth marks and chatter on the stem along with the oxidation with 220 grit sandpaper. The photo below shows the stem after the sanding. I rebuilt the dent in the button with black super glue. Once it was dry I sanded it to match the rest of the button.The stem had a very interesting tenon. It was short and it had what looked like threads on it. I decided to leave these in place rather than change the original shape of the tenon. I worked over the stem itself. I polished the vulcanite with micromesh sanding pads. I wet sanded it with 1500-2400 grit pads. I rubbed it down with Obsidian Oil repeatedly during the sanding. The photo below shows the stem after being sanded with the first three pads. There is still evidence of oxidation in the rubber so it will take a lot more sanding and polishing before it is black again. I buffed it after this with red Tripoli on the buffing wheel and was able to remove more of it. I dry sanded it with 3200-12000 grit pads (the second and third photos below) and again rubbed it down repeatedly with Obsidian Oil. Once it was finished I gave it a final coat of oil and let it dry. I buffed the bowl and stem with Blue Diamond a final time and worked to remove any remaining oxidation on the stem. The Blue Diamond is a plastic polish and it really brings a shine to the vulcanite. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I finished buffing by hand to deepen the shine. I polished the silver band with a jeweler’s polishing cloth and removed the remaining tarnish. The finished pipe is shown in the photos below. I wish I knew who the unknown maker was. He or she did a great job making this pipe. The shape, the layout with the grain and the craftsmanship make this a pipe that will outlive me that is for certain. It is truly a beautiful pipe. Thanks for walking with me through the process of the restoration.

Restoring a Pipeman’s First Pipe

4 Replies

Sometimes I get requests to restore pipes that touch a sentimental chord for me. When that happens it brings back all kinds of memories and thoughts for me. A while ago I received an email from Phil regarding a pipe he had that he wanted some help with. He explained that it was not an expensive pipe but that was his very first when he started as a pipeman. We emailed back and forth for a bit and then he sent it up to me in Vancouver to assess and see if it was worth restoring. It came in the mail last week and I opened the package to have a good look at it. I went over it slowly and carefully and found some issues that needed to be addressed. To me the pipe was very restorable and I was willing to take it on.

Here is what I saw as I looked at the pipe. I put together a list for Phil and emailed it back to him. I would say it is well worth a cleanup, repairs, refinishing and polishing. I think that it has a pretty long life ahead of it.

He was concerned with the overall condition of the pipe. It was a basic basket pipe and had a lot of fills in the bowl and shank. The bowl had never been smoked to the bottom so the briar is raw. It is a little smoky looking but is basically sound. The pipe can be smoked for a long time.

The little lines in the bottom of the bowl are called checking. They happen to the inside of almost all pipes and are caused by heating and cooling. In this case it appears that the pipe had never been smoked to the bottom. I recommended a complete reaming and then some pipe mud (cigar ash and water) to fill in the little fissures and then a simple bowl coating to protect the bowl while he built a cake.

He had mentioned a crack on the left side of the bowl. The noted crack was definitely there. It was on the left side toward the front. It is a hairline crack that starts at a putty fill toward the top of the bowl and ran down to another putty fill on the bottom of the bowl. This is one time where fills actually worked in my favour. I repair cracks all the time by drilling a small pin hole at each end to stop the crack from spreading. In this case the fills did just that for me. Go figure. I would need to simply pick out the old putty and repair the fills or top them up with super glue and briar dust.

The rim looked like it had several fills on the top and the inner edge. It was hard to be certain as there was a thick coat tarry lava. It would need to be cleaned off and the fills check for stability and repaired if not.

The stem was in good shape but was oxidized and had tooth chatter. It would need to be cleaned and polished to remove the oxidation and make the vulcanite shine.

Looking in the shank the mortise and airway are also sound.

Here is what the pipe looked like when it arrived in Vancouver. I took photos to set the base for what it looked like before I started. Note the fills on the shank sides, bottom and bowl sides and bottom. I took a close up photo of the rim top to show the condition of the bowl and the rim. The front inner edge of the rim appears to be burned and it is out of round. It is hard to know if there was any other damage on the rim top.I took some close up photos of the fills and crack on the left side of the bowl running between the two large fills. It is circled in red in the photos below. The crack is hairline and is fairly tight. The fills show some shrinkage in the putty and will need to be removed and replaced.I took a close up photo of both sides of the stem to show the tooth marks and chatter on both sides near the button.I reamed the bowl with a Savinelli Fitsall Pipe Knife to scrape out the cake to the bare briar. I used the sharp edge to scrape off some of the heavy cake on the rim top.I scrubbed the top of the rim with alcohol and cotton pads. I was able to remove most of it. The inner edge of the bowl showed a lot of damage. The front edge had a fairly deep burn mark that covered the surface of the rim at that point but did not go too deep.I cleaned up the inner edge of the rim and the sides of the bowl with the PipNet reamer. I used it to remove some of the damaged edge.I topped the bowl to deal with the burn mark that is visible in the above photo. After I topped it I repaired the damaged fills on the rim and bowl sides that way I could top the repaired portions at the same times. I picked out the fills with a dental pick and removed the putty. The two that joined the crack were quite large and deep. I repaired them by tamping briar dust into the pits and then pushing clear super glue into the dust. I repeated the process leave a thick bubble of glue and dust on the surface of the repair. I did the same on the rim top, inner edge and the shank sides and bottom to repair the fills there.I sanded the fills smooth with 220 grit sandpaper to blend them into the surrounding briar. I added a little more super glue to some pits in the repairs and sanded them once the glue had dried. I sanded the oxidation and tooth chatter off the stem with 220 grit sandpaper. I was able to remove all of the chatter and even the tooth marks as they were not too deep in the vulcanite.I sanded the bowl and stem with a medium and a fine grit sanding sponge to begin to smooth out the scratches and sanding marks. I sanded the bowl with 1500-4000 grit micromesh sanding pads in preparation for staining the bowl. I planned on giving the pipe a contrast stain so I started with a dark brown aniline based stain. I applied the stain, flamed it and repeated the process until I was satisfied with the coverage.I wiped the bowl down with alcohol on a cotton pad to remove the heavy dark finish and make it more transparent. I wanted the dark brown deep in the grain once I had removed it from the lighter portions of the briar. I sanded the bowl with 1500 grit micromesh pads. I continued to sand the bowl with 1500-2400 grit micromesh pads to get the transparency that I wanted on the bowl. The next photos show what it looked like once I had finished sanding it. I gave the bowl a top coat of Danish Oil with a Cherry Stain. I rub the oil onto the bowl and rub it off and buff it. The next two photos are a little blurred but you can clearly see the cherry colour that is coming to the surface of the bowl. It works really well to blend in the fills.I set the bowl aside to dry and turned to the internals. I cleaned out the mortise and the airway in the shank and stem with alcohol, pipe cleaners and cotton swabs.I polished the stem with micromesh sanding pads – wet sanding with 1500-2400 and dry sanding with 3200-120000 grit pads. I buffed the stem with red Tripoli on the buffing wheel after the 4000 grit pad and then finish sanding it with the 6000-12000 grit pads. I gave the stem multiple rub downs with Obsidian Oil after each few pads to see if the oxidation at the shank end was getting better. By the time I was finished with the final pads the stem looked much better. I would give entire pipe a buff before I finished the restoration. I mixed a batch of pipe mud – cigar ash and water – to form a paste and applied it to the bowl bottom and sides with a folded pipe cleaner. I pressed the mud into the small checking that was around the bowl bottom with a dental spatula. The pipe mud will protect the bowl while a cake is formed.I buffed the bowl and stem with Blue Diamond on the buffing wheel to raise the shine and highlight the grain on the bowl. The fills are still visible but they blend into the surface of the briar better than they did before. I gave the pipe multiple coats of carnauba wax and buffed it with a clean buffing pad to raise the shine. I hand buffed it with a microfibre cloth to deepen the shine. The finished pipe is shown in the photos below. I will be packing it up and mailing it back to Phil once I give it a bowl coating. I am hoping he enjoys this piece of his personal pipe history. It should provide many more years of enjoyment for him.