2 Replies

Blog by Robert M. Boughton
Copyright © Reborn Pipes and the Author except as cited
https://www.roadrunnerpipes2k.com/
https://www.facebook.com/roadrunnerpipes/

You can’t judge a book by its binding.
— From the journal American Speech, 1944

INTRODUCTION
The Dr. Grabow easy bent smooth billiard I came by in a foolish case of mistaken identity on eBay looked normal enough on the outside, other than an apparent crack that wasn’t visible in any of the seller’s few photos. The zigzag flaw extended from the top front of the bowl almost halfway down, which of course was not a good sign in a pipe when the intent was to sell it – and I definitely did not want to keep it for my own collection. The dubious pipe came as part of a lot with two others of its ilk; an old Karl Erik box; two very nice choice sleeves – one that was also for a Karl Erik and the other for a Butz-Choquin – and two Revelation Smoking Mixture tins of indeterminate age. Venturing a guess, I’d say they’re no newer than the pipes.

My haul, minus the Dr. G, Yello-Bole and MedicoMy impression from the poor photos provided online was that one of the pipes must have been a Butz-Choquin. You see, the only descriptions of the pipes given in the listing were that they were “vintage,” and you guessed it, I fell for the deliberate obfuscation, and Buy Now to boot. As the only measure of self-defense I can muster, at least I only paid about $10, with shipping included. They turned out to be this Dr. Grabow and two Yello-Boles, one a Spartan. The Spartan did clean up purty compared to how it was.The Dr. G. is six inches long but otherwise very small. The height is 1.5” and the inner bowl diameter is ⅝” x 1” As a rule, unless the particular pipe is very old or has some other special attribute, I shy away from this name and Medicos and the like, although I’ve found almost anything will sell to someone who is a fan of a given brand. In fact, just last week at my monthly pipe meeting I sold the Spartan with a stem logo of a yellow Y in a circle to a friend who happens to be my best customer.

The friend has accumulated some great pipes from me – such as a late 1930s Kaywoodie Super Grain and a Ropp last month – and an amazing collection of antiques including a few KB&B beauties, but he admits to having a weakness for vintage Yello-Boles. I estimated the Spartan dated to the 1960s, and my friend somehow traced it on his cell phone to 1966. That’s what I call a Yello-Bole devotee.

At any rate, the Dr. G. billiard remained quarantined in a box for more than a year with others that are so tragic I’m sure I’ll end up using them as examples of pipes never to buy. In short, only when it was the last pipe I had to work on did I gather the gumption to go for it.

But as I already noted, all outward appearances showed nothing I couldn’t handle without too much effort, including the odd zigzag on the bowl. The inside turned out to be a different matter altogether, one for the books as far as I’m concerned.

RESTORATION

I wanted to get the pipe in a basic clean order before tackling the crack. Starting with the light rim char and cake in the chamber, I used super fine “0000” steel wool on the rim to begin and a pen knife around the walls of the chamber that was too small to insert a reamer – meaning the one size I have. Then I sanded the rim with 1000-grit paper and the chamber using a pinkie and 150- and 220-grit papers. I cleaned off the old blackness from the shank opening with the same steel wool and wiped down the entire stummel with purified water on a paper towel.Now the crack I mentioned is apparent. Knowing it wouldn’t get rid of the crack, I sanded the outside of the wood with 1000-grit paper to remove the other small but pervasive blemishes. With the pipe more or less spiffed up, I could see the crack was hairline, so to speak, not penetrating the bowl in any visible way. That was a relief as I knew I could make it go away altogether with sanding. I tried 150-grit paper, and that looked like the end of the ostensible crack. I followed up with 320-, 400-, 600- and 1000-grit papers.A full micro mesh progression left the briar looking absolutely fabulous, or abfab, as British interior designers like to gush about wood. To be serious, though, which I often try not to be, knowing it drives some readers nuts but keeps me sane, the micro mesh step – if I had to choose just one from all of the routine tasks in a pipe restoration – is my favorite. Seeing the resilience of wood, or briar anyway, that allows it to bounce back from ruin is to me what sunshine was to John Denver. Well, not exactly, but you get the idea. The front shot above, I’m sorry to say, doesn’t show how pale most of that side was even after micro meshing. Suffice it to say, a spot stain was necessary with Lincoln brown leather dye. I took a little more joy in staining and flaming it. Looks like everything is going great, doesn’t it? That’s rhetorical. Only after thinking I was almost finished did I commence the part that turned into a singular horror the like of which I never before experienced. Without exaggerating at all, I admit I was sure I had found a pipe that could not be cleared of all impurities, no way, no how. I’m sure this sounds like more of my melodramatic foolery, but for once I am being as serious as I get. I suspect I may have some kind of world record, if people registered such statistics, but no doubt Steve, if perhaps no one else, has a worse story or stories to tell. I’d love to hear them!

To wit, I found myself at the point of having to deal with the inside of the billiard. Nothing prepared me for the almost human resistance and downright orneriness I encountered, not to mention the smoking implement’s physical manifestation of the common human psychological condition of filthiness.

The pictures that follow, showing the pre-cleaning, retort and aftermath of all that, with nine pipe cleaners, a nylon bristle cleaner, two cotton plugs and a wasted (in the colloquial sense) candle, don’t approximate the work and time already expended on cleaning and sanitizing the inner passageways of the pipe. I included the Tupperware with spent alcohol as a clue to how much I boiled through the guts of the thing, with the wholly unsatisfying and unacceptable final Pyrex tube as dark as every other, but it still isn’t sufficient to understand my frustration, so I’ll tell you. I had already used up 13 tubes of alcohol, getting nowhere.I knew I could use any number of pipe cleaners dipped in alcohol on the shank and it would do no good. And so I started again, with a fresh retort (and candle and two more cotton plugs). After nine more tubes boiled through the pipe – that’s a total of 22 – I at last achieved a clear enough result that didn’t get darker after three trips through the bowels of the Grabow.I don’t know, maybe this isn’t so unusual. Or maybe I need a better retort system, as I’ve been looking forward to buying, something like the first one below, probably self-made by my friend Chuck Richards, or even the other I found online.

Hand-held laboratory-style retort system made by tbus6906, eBay, and an actual lab setup from best collection999 at eBay

And now for the stem, starting as it appeared when I got it and after the various phases of smoothing and buffing. And here is the finished pipe, the stem machine buffed with red and white Tripoli and the stummel with White Diamond and Carnauba. That’s a Medico filter in the stem, BTW, because it’s all I have and it fits! Besides, whoever buys the Grabow will probably toss it.

CONCLUSION
This was an unusual restore for me for a couple of reasons. One, I set out thinking the big deal was going to be fixing a bad crack, and two, the real problem ended up being hidden within. My previous record for the number of Pyrex tubes of alcohol I had to run through a pipe was nine, for a pipe I haven’t blogged yet. I thought that was bad until I was faced with the harsh reality of this dainty little Grabow! It’s the right size for most women (no sexism intended but I’ll probably get flack for that), but only a man could have smoked a pipe for possibly 40 years without ever really cleaning it. Maybe that will get me off the hook with any female smokers who read this.

Oh, yes, a note about Revelation Pipe Mixture. Never having heard of it and suspecting it’s out of production, I found I was correct about the latter part. It was blended by House of Windsor, which still makes about 20 mixes, mostly aromatics, in the U.S. Revelation was a coarse-cut (based on the photo I found, despite the description as ribbon cut) American blend of bright flake and red flake Virginias, cube cut burley, Kentucky, latakia, perique and “citrus/misc.” It seems to have been somewhat popular given a 3.1 out of 4 rating at TobaccoReviews.com. Legend says this was Albert Einstein’s go-to mix, so it couldn’t be all that bad. It seems a reincarnation of this tobacco is being made in bulk form and true ribbon cut, from the same ingredients. The link to the source is below for anyone interested. Revelation was made by Philip Morris Co. Ltd. Inc. and distributed by Continental Tobacco Co. I guess the tins are pretty old because companies aren’t named like that anymore.

SOURCES
https://www.ebay.com/itm/Professional-Pipe-Retort-Kit-/252292269562
https://www.ebay.com/itm/50cm-Lab-Laboratory-Retort-Stands-Support-Clamp-Flask-Platform-Alcohol-Bottle-Tu/113144136090?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3Dea98143cf6974165b8baaa44c36acc79%26pid%3D100005%26rk%3D3%26rkt%3D8%26sd%3D312302738289%26itm%3D113144136090&_trksid=p2047675.c100005.m1851
http://www.tobaccoreviews.com/blend/1219/house-of-windsor-revelation
http://www.tobaccoreviews.com/search?Blender=House%20of%20Windsor
http://wvsmokeshop.com/revelationalternativebytheounce.aspx

Rescue of a Stately Stanwell Henley Special, Made in Denmark, Oval Shank Billiard

3 Replies

Blog by Dal Stanton

I have been looking forward to this project ever since I landed three Stanwell Henley Special pipes on the eBay block from a seller in Maryland. The seller provided helpful information that only helped urged me to place a bid:

This auction is for three vintage Stanwell, Henley Line estate pipes from the 1950’s-60’s era. All are in good pre-owned condition. The stems are primarily free from teeth marks. The stems do have some fading. All of the stems fit snug and the wooden bowls are free from outstanding blemishes. As seen from top to bottom, the first pipe reads Henley Special #57, the second and third read Henley Special without any numbers seen. All of the pipes read Made in Denmark.

Since I started collecting and restoring pipes, I’ve grown in my appreciation for Danish made pipes. They tend to be stout, well made pipes. The stems are also interesting – the ‘pinched saddle’ fish tail is unique. When I saw the 3 Henley Specials, I was attracted to the line-up but had never heard of ‘Henley’. When I read the sellers description I was sold – I was especially drawn to the ‘Chimney’ on the top of the group below, sporting a pinched saddle fishtail stem. The Stanwell Henley on my workbench now is the classic Oval Shank Billiard in the center. Along with a Comoy’s Moorgate, Jim saw the Henley Special in the For ‘Pipe Dreamers’ Only! collection and commissioned him. He saw what I also see in these classic Danish pipes. As with frosting on the cake, this pipe benefits the Daughters of Bulgaria, our work here in Bulgaria helping women and girls who have been trafficked and sexually exploited. The pictures show what I saw on eBay. Unfortunately, I cannot find much online regarding the Henley line. Pipedia’s article on Stanwell pipes simply places the Henley Special line in the list of Stanwell second brands. Pipephil.eu provided more information with a Henley much like the slightly bent, Chimney above with the characteristic bulging midsection, but with a blasted finish. It also show a ‘H’ stem stamp. If the Henley on my worktable had one, it is now long gone.The only information I found that gave any reference to dating is spurious at best. I found the following picture on Google images but the link to pipesmokersforum.com is now a dead end. “Who made this pipe?” I would have loved to read the thread that discussed the dating of the discontinued Stanwell second, Henley Special. The picture puts a question mark in the late 50s. Looking at all the 3 Henley Specials I acquired, the look and feel of them lends toward this dating, but…. This picture and the eBay seller’s description placing the pipes in the 50s or 60s are anecdotal, but seem to me to be accurate. Oh, for the return of the now defunct, Chris’ Pages website, to look through the old catalogs! One very interesting find was a Stanwell Henley Special for sale in the listings of SmokingPipes.com in restored state – very nice. It gives me an idea of what might be under the older, tired finish of all three Henleys in my collection.Taking a closer look at the Henley Special Oval Shank Billiard on my worktable, I take these pictures for a closer look. The nomenclature is found on the upper side of the oval shank. A very thin, worn ‘Henley’ (in cursive script) [over] offset ‘SPECIAL’. On the underside is the COM, ‘MADE IN DENMARK’. As with the other two Stanwell Henley pipes I acquired at the same time, the finish is extremely dark from years of grime and oil build up. The uniformity of the darkened state of the pipes lends to a common period of manufacturing, which I’m guessing to be in the 1950s or 60s. Even though I know it’s not an exact science, the feel of the pipes seems older. I need first to clean the briar surface before I can see what is going on with the briar – the condition or even the look of the grain. The oval saddle stem has oxidation, tooth chatter and dents which need attention. The cake in the chamber is thick and will be removed to give the briar a fresh start. The rim has significant lava flow and I detect a divot on the internal lip of the rim which needs attention.

To begin the restoration of this vintage Stanwell Henley Special Oval Shank Billiard, I run a pipe cleaner dipped in isopropyl 95% through the airway to clean it up. I then add the oval saddle stem to a soak of Before & After Deoxidizer with other pipes and stems in the queue. I leave it in the soak for several hours and fish it out, letting the Deoxidizer drain off the stem. I then wipe the raised oxidation with cotton pads wetted with alcohol. I follow the alcohol by wiping the stem with a pad wetted with light paraffin oil. Turning now to the bowl, I begin by reaming the chamber. There is heavy cake in the chamber tightens as it descends in the chamber. Using the Pipnet Reaming Kit, I start with the smallest of the 4 available blade heads. After putting some paper towel on the table, I go to work. I use 3 blade heads of the 4 and then transition to the Savinelli Fitsall Pipe Tool. With the Fitsall tool I continue scraping the chamber wall and fine-tuning the reaming and reaching to the difficult angles. Then, wrapping 240 grade paper around a Sharpie Pen, I sand the chamber removing more carbon and revealing fresh briar. To complete the chamber cleanup, I wipe it with a cotton pad and alcohol to clear the carbon dust. With the carbon cake cleared, an inspection of the chamber reveals no problems with cracks or heat fissures. The pictures show the progress. Turning now to the external surface, I use undiluted Murphy’s Soap on cotton pads. I’m anxious to see what the Murphy’s Soap does on this very dark, aged briar surface. As I use the cotton pad, I very quickly begin to see what beauty was waiting underneath. I called my wife to take some pictures as I scrubbed the ancient layer of oils and tars that have cocooned the briar underneath. I also use a bristled tooth brush and a brass wire brush on the rim. My, oh my! I’ve never seen a pipe clean up to such a pristine condition. I rinse the bowl with tap water and literally marvel at what is in my hand. The rim is still darkened a bit from lava flow, but the flame grain that dominates the bowl’s external surface is striking. I take two pictures after the cleaning to mark the progress. As I look at the stummel, I decide to hydrate the briar using light paraffin oil (mineral oil) which also gives me a sneak peek at a finished stummel. The before and after pictures tell the story. Turning now to the internals of the stummel, I use cotton buds and pipe cleaners dipped in isopropyl 95% to clean the mortise and airway. I also utilize long shank brushes to save on pipe cleaners. To loosen up the tars and oils, I employ a dental spatula to scrape the mortise wall and reach into the airway. A drill bit effectively excavates crud out of the airway. To do this, I use a bit the size of the airway and hand turn the bit so that it proceeds down the airway. The bit grabs the buildup and removes it. After some time excavating and scraping, pipe cleaners and cotton buds start coming out clean. The pictures show the tools and the progress.I continue the internal cleaning with a kosher salt and alcohol soak. After twisting and stretching a cotton ball to form a wick, I stuff it down the mortise/airway to draw the oils and tars. Following this, I fill the bowl with kosher salt (kosher salt has no residual after-taste as does iodized salt) and set it in an egg crate. Using a large eye dropper, the bowl fills with isopropyl 95% until the alcohol surfaces over the salt. After a few minutes the alcohol is absorbed, and I top off the alcohol and set the stummel aside for the night. The next morning, the soak did the work. I toss the expended salt in the waste and wipe the bowl with paper towel to remove the salt. I also use a shank brush in the chamber and down the mortise to remove any remaining salt. Finally, I blow through the mortise. To make sure all is clean, I finish by wetting a pipe cleaner and cotton bud with isopropyl 95% and running them through the mortise. I declare the stummel to be cleaned. With the pipe cleaned, I look again at the stummel surface which almost appears to have been protected by the layer cocooning it. My task will be to preserve the patina of the briar’s finish by not introducing sanding that will be too invasive and remove the aged surface. I sent a note off to Steve of rebornpipes, just to make sure my plan received his concurrence before moving further with the Henley. My plan is to first repair the divot on the inside of the rim lip, shown at the 2 o’clock position on the first picture below. I could introduce an internal bevel to mask the divot, but I would rather salvage the rim real estate with this vintage pipe. I make a patch of briar dust and thick CA glue and mix a small amount of putty with it. After wiping the area with alcohol to clean it, I mix the CA glue and briar dust until it reaches the viscosity of molasses and apply the putty to the divot using a toothpick. It takes very little. I put the stummel aside to allow the patch to cure. With the patch curing, I look at the stem and take some close ups of the bit area. The chatter is light with some bites. I begin by using the flame method to raise the indentations in the vulcanite. With a Bic lighter, I paint the button area. The physics of vulcanite – a compound rubber, expands when heated. The heating causes the bites and chatter to lessen in the intensity. As I heat, it does lessen but is not fully removed. I next use 240 grit paper and sand out the chatter and dents remaining. I also use the flat needle file to redefine the button lips – upper and lower. The pictures show the progress. Following the 240 paper and filing, I use 600 grade paper and wet sand the entire stem. I follow this using 0000 steel wool to sand/buff the stem. The pictures show the progress.Next, using micromesh pads 1500 to 2400, I wet sand the stem. I follow by dry sanding using pads 3200 to 4000 and 6000 to 12000. Between each set of 3 pads, I apply a coat of Obsidian Oil to the stem to revitalize the vulcanite. The pictures show the progress of restoring that glossy pop. I like it! With the stem drying, I look again to the stummel. The briar dust patch is cured, and time to be file and sand the patch mound. I use both a flat and a half-rounded needle file to gently and patiently file the patch mound on the top of the rim and on the inside lip. I’m careful not to impact the surrounding rim briar. After some time filing, I use a piece of 240 tightly rolled to finish the sanding, bringing the patch flush with the briar on the top and inside. I chronicle the progress. Next, I gently clean the whole rim surface by lightly sanding it starting with micromesh pad 1500 and completing with pad 3600. The rim looks good.To preserve the patina in the old finish, I’m willing to allow some scratches and dents to pass as badges of this Stanwell Henley’s past walk in life. I did want to try raising some in an area where I identified a concentration of these. I take a picture to show a closeup of the area. I then take my wife’s iron (she always raises her eyebrows when I ask for permission and my response to her question regarding what use HER iron will be to the art of pipe restoration! 😊) and wet a rag with tap water and place the rag over the briar area to be addressed. After the iron is heated, I place the iron over the rag which heats both water and wood creating a steaming effect on the dents and scratches. The effect of the heating and moisture causes the briar to absorb the moisture and expand, helping to close the wounds. This technique helped, but there remain some badges of the past for the Henley Special! Following this heating technique, I apply Before & After Restoration Balm to the entire briar surface working it in well. I apply some to my fingers and massage the Balm into the briar. The Balm begins with the texture of a light oil but thickens into a heavy wax as it is worked into the briar. After the Balm absorbs for a few minutes I wipe it off the stummel surface with a microfiber cloth. As I wipe, the Balm-treated surface loosens, and it becomes more of a buffing. I like what the Before & After Restoration Balm does to bring out and enrich the briar. The water spot (above) disappeared as the Balm did its job.At this point, I rejoin the stummel and stem and often I find that the cleaning process has loosened the connection. To remedy this, I choose a drill bit that is the next size larger than the bit easily fitting down the airway of the mortise. I heat the vulcanite of the tenon by painting it with a lit Bic lighter. As the vulcanite heats, it becomes supple allowing me to work the drill bit into the tenon thus expanding the tenon’s diameter microscopically and securing a tighter fit for the tenon in the mortise. The expansion worked so well, that I needed to loosen the tenon a bit using 470 and 600 grade papers and then 0000 steel wool. The fit now is good. With the tenon now fitting the mortise snugly, I mount the Dremel with a cotton cloth buffing wheel, set the speed at about 40% full power and apply Blue Diamond to the entire pipe. With this compound being the only abrasive, I’m applying to the bowl, I spend extra time working the compound over the briar. The compound doesn’t remove the ‘badges’ I’ve left behind, but it buffs out the very fine lines in the briar surface creating that natural briar shine. When I add wax to this natural shine, it’s like frosting on a cake! After applying the Blue Diamond is complete, I hand buff the entire pipe with a felt cloth to remove the excess compound dust left behind before applying carnauba.I now mount another cotton cloth buffing wheel to the Dremel, maintaining the same speed, and apply a few coats of carnauba wax to the stem and stummel. I finish the restoration by giving the pipe a rigorous hand buffing with a micromesh cloth which raises the gloss even more.

Oh my! When Jim commissioned this Stanwell Henley from the For ‘Pipe Dreamers’ Only! collection, could he have possibly seen what was hidden in this stately Oval Shank Billiard, Made in Denmark? The grain and patina are beautiful. I called the pipe, ‘stately’. It’s remarkable, how so much beauty is hidden underneath the surface appearance and neglect of years. Yet, as the vertical, flame grain cascades upwardly to the rim, if one looks closely at the rim, revealed there are the small bird’s eye grains formed by the cut cross-sections of the vertical grain. I’m pleased with the small, seemingly insignificant internal lip patch to the rim – it blends well and joins the ensemble without notice. With the bowl’s striking grain revealed, the oval shank now compliments well as it flows to the saddle stem. I fear I’m waxing too much at this point! Jim has the first opportunity to acquire this 1950s or 60’s Stanwell Henley Special from The Pipe Steward Store and this benefits the work we do here in Bulgaria with the Daughters of Bulgaria – women and girls who have been trafficked and sexually exploited. Lest we forget, I begin with a ‘before’ picture for the striking contrast. Thanks for joining me!

Restoring a Pair of Family Era Barling’s Make Pots

3 Replies

Blog by Steve Laug

When I finished the restoration work on a pair of Comoy’s Blue Riband Billiard pipes and sent them back to the owner, Scott in California I received another email in return saying that he had sent me a pair of Family Era Barling’s Make pot shaped pipes. Here is the link to the work on the Comoy’s Blue Ribands (https://rebornpipes.com/2018/09/29/restoring-a-pair-of-comoys-blue-riband-billiards/).

While my Dad was visiting recently I received a package in the mail from Scott in California, US containing the two Barling’s Make pipes. There was a note in the box regarding what he wanted done with the pipes. He wrote:

Here are those two Barling Family Era pipes as promised. As you can see, the larger pipe (1752) should be pretty easy. I’d like to keep the original finish on this one and eve out the colour on the rim to match the rest of the pipe. The smaller pipe (1533) is another story. Looks like a full restoration job here. The stem is seized in the shank, layers of lava over rim char, spot of finish loss on the outside etc. I’ll leave it to you to bring this little beauty back to life.

After opening the wrappings in the well packed box I found the two pipes. I took pictures of both pipes to capture their condition when they arrived. The first set of photos shows the larger 1752 pipe that he said “should be pretty easy”. The finish still had a shine on the bowl and shank. There were some paint flecks on the right side of the bowl. The rim top was in the issue as he had noted. The finish was spotty and there was significant burn damage around the inner edge and some darkening. There was a light cake in the bowl but no overflow on the rim top. The stem fit well in the shank though the shank was very dirty. The stem was oxidized and had light tooth marks and chatter on both sides near the button. I took some close up photos of the rim top and the stem to give a clearer picture of the condition of the pipe. The stem is stamped with the Barling cross on the top of the saddle and with the words Barling over Design. The stamping is legible but the white in the stamping is gone.I took photos of both sides of the shank to show the stamping on the pipe. The left side read BARLING’S arched over MAKE with the shape number 1752 underneath. The right side was stamped EXEXEL. The stamping is indeed Family Era vintage.The next set of photos shows the second Barling’s Make which was far more worn and dirty. The finish dirty and did not have the glow of the other pipe. There was a spot on the left side of the bowl where the finish was chipped. The rim top had a thick coat of lava overflowing from the bowl. It was hard to know if there was further damage to the top surface. There were some nicks in the outer edge of the rim top. The cake in the bowl on this one was thick and rock hard. The stem did not seat in the shank completely and when I looked the shank was very dirty and caked with tars. The stem was more oxidized than the other pipe and had tooth marks and chatter on both sides near the button. I took some close up photos of the rim top and the stem to give a clearer picture of the condition of the pipe. The stem is stamped with the Barling Cross on the top of the saddle and with the words Barling over Design. The stamping is legible but the white in the stamping is gone.I took photos of both sides of the shank to show the stamping on the pipe. The left side read BARLING’S arched over MAKE with the shape number 1533 underneath. The right side was stamped EL. The stamping is indeed Family Era vintage.I reamed both bowls with a PipNet pipe reamer working through the cutting heads to take the cake back to the bare briar so I could check for damage to the interior walls of the pipe. I cleaned up the reaming with a Savinelli Fitsall Pipe Knife and finished with a piece of dowel wrapped in 220 grit sandpaper to smooth out the walls. The first pipe was definitely cleaner than the second. The cake came out easily. The second pipe had a cake that was rock hard and I had to switch between the smallest cutting head on the PipNet and the Fitsall Knife to break through the cake. I worked my way alternating between the two until the bowl was reamed and then sanded it smooth. I scraped the mortise walls of both pipes with a pen knife to remove the buildup of hardened tars and oils. I cleaned out the mortise and the airway into the bowls as well as the airway in the stems of both pipes with alcohol, cotton swabs and pipe cleaners. I have to say that the second pipe was far dirtier than the first. I worked on the rim on the first pipe to clean up the damage. I worked on the inner edge of the bowl with a folded piece of 220 grit sandpaper. I lightly sanded the top of the rim with 220 grit sandpaper. I was able to remove the damage to the rim top and edges. I polished it with 1500-2400 grit micromesh sanding pads. I continued polishing it with 3200-12000 grit pads. I stained the rim top of the first bowl with Maple and Cherry stain pens to match the colour of the rest of the finish on the pipe. It still needs to be polished at this point but it matches the colour of the pipe.I worked on the rim top of the second pipe. I topped the bowl on a topping board with 220 grit sandpaper to remove the thick buildup and the nicks and damage on the surface of the rim. I sanded with micromesh sanding pads – wet sanding it with 1500-2400 grit pads and dry sanding it with 3200-12000 grit pads. I was able to remove the damaged areas and leave the rim top clean. There was still some damage and darkening around the inner edge but I have chosen to leave that for now. I stained the rim top of the second bowl with a Walnut stain pen to match the colour of the rest of the finish on the pipe. It still needs to be polished at this point but it matches the colour of the pipe.I took a photo of both pipes together at this point to show the clean bowls and the condition of the rim tops. The colour of each matches the respective bowl. Both still have damage to the inner edge of the bowl. I had not decided how to address that issue. Scott did not want the inner edge beveled at all. I worked Before & After Restoration Balm into the briar of the first bowl with my fingertips to clean, enliven and protect the wood. I let the balm sit for about 20 minutes and buffed it off with a soft cotton cloth. I took photos of the pipe at this point in the process to show what the bowl and rim looked like. I am happy with the stain match on the rim top. The next four photos show the larger and better conditioned 1752 bowl. It looks really good after the balm and buffing. I smoothed out the damaged spot on the finish on the left side of the bowl and restained it to match the rest of the stain. I worked Before & After Restoration Balm into the briar of the second bowl with my fingertips to clean, enliven and protect the wood. I let the balm sit for about 20 minutes and buffed it off with a soft cotton cloth. I took photos of the pipe at this point in the process to show what the bowl and rim looked like. I am happy with the stain match on the rim top. The next four photos show the smaller bowl, the 1533, that was in worse condition than the first. It looks really good after the balm and buffing. I sanded out the tooth marks and chatter on the stem on larger 1752 pipe with a folded piece of 220 grit sandpaper. I forgot to take photos of the stem at this point in the process. I rubbed the stem down with Denicare Mouthpiece Polish to remove as much of the oxidation as possible without damaging the stamping.I polished it with the micromesh sanding pads – wet sanding it with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. I rubbed it down with Obsidian Oil between each pad. I polished it further with Before & After Pipe Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil and set it aside. With that stem completed I turned to the second stem, the one on the 1533 the dirtier pipe. Upon examination I found that the stem was a twin bore bit. It had the classic “Biteproof” stem on it. And even that feature had not kept it safe from tooth dents and mark. I “painted” the surface of the stem with the flame of a Bic lighter to lift the tooth marks. Once that was finished I sanded out the tooth marks and chatter with 220 grit sandpaper. After I sanded out the tooth marks and chatter on the stem on 1533 pipe I rubbed the stem down with Denicare Mouthpiece Polish to remove as much of the oxidation as possible without damaging the stamping.I polished it with micromesh sanding pads – wet sanding it with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. I rubbed it down with Obsidian Oil between each pad. I polished it further with Before & After Pipe Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil and set it aside. I filled in the letters on the top and underside of the Barling’s Make stems with a white out pen. The tip of the pen was frozen so I slit a hole in the side of the pen and used the white out to fill the stamping on the stems. I let it cure and harden. Once it had hardened I scraped it off with my fingernail and left the remainder behind in the letters. I still needed to polish the stem and bowl on the wheel with Blue Diamond to remove the small scratches that showed up with the flash. Once that is done the pipe will be ready to send back to Scott in California.I polished the bowls and stems with Blue Diamond to polish out the scratches in the briar and rubber. I gave the bowls and the stems multiple coats of carnauba wax. I buffed the pipes with a clean buffing pad to raise the shine. I hand buffed them with a microfiber cloth to deepen the shine. Both pipes polished up pretty nicely. The original patina on both bowls came alive with the buffing and worked well with the polished black vulcanite stems. Both pipes have a rich look. The finished pipes are shown in the photos below. The first pipe is the one that was in “better condition” when it arrived. I think it is a bit newer than the second one. The shape, finish and flow of the pipe and stem speak well of the Family Era Barling’s Make pipes. The dimensions of the first pipe, shape 1752 are Length: 5 1/2 inches, Height: 1 3/4 inches, Outside diameter of the bowl: 1 3/4 inches, Chamber diameter: 3/4 of an inch. The dimensions of the second pipe, shape 1533 are Length: 5 1/4 inches, Height: 1 1/2 inches, Outside diameter of the bowl: 1 1/2 inches, Chamber diameter: ¾ of an inch. This pair will soon head back to California so that Scott can enjoy them. Thanks for walking through the restoration with me as I worked over this beautiful pair of Family Era Barling’s Make Pipes… now I need get these packed up and back to Scott!

Restoring Life to a Early 20th Century Gitana Depose Apple

1 Reply

Blog by Steve Laug

I was going through boxes of old pipes here, sorting and getting them ready to sell as grab bags. In the process I came across this pipe. It is stamped Gitana in an oval with an L on the left of the oval and G on the right side of the oval. Underneath the oval stamp is the word Depose. There is a polished aluminum band on the end of the shank. The briar is quite nice with birdseye around the bowl. The stem is horn and has a lot of tooth damage next to the button on both sides. There are deep troughs carved by the teeth in the horn material on both sides. The rim had a lot of damage from burn marks and the inner edge had been damaged by reaming with a knife. There was a white waxy substance on the inside of the bowl from the edge down about a ½ inch. There was a light cake in the bowl and some light lava on the bowl top. I took a close up photo of the rim top to show the damage to the inner edge of the bowl from the reaming job. The cake on the bowl sides and the tarry oil on the rim top are also visible. The briar at the top is quite damaged and will take some work to remove the knife cuts and deep gouges in the briar. The stem is also shown with the chewed damage on both sides. I removed the stem from the shank and was a bit surprised by the aluminum system that was inside. The tenon was aluminum and had a bullet shaped cap on the end of it. The cap had a hole in the top that allowed the smoke to be drawn through the airway in the stem. The previous own had wrapped the aluminum portion of the tenon with what looked like aluminum foil to build it up to fit tightly in the shank. The photos below show the tenon and the system. I was unfamiliar with the brand and was surprised by the tenon system. I did some searching online and could find nothing on the Gitana brand or the Gitana Depose brand. I did happen across a similar pipe on Smokingpipes.com. The writer who described the pipe for the site wrote the following which contained some really helpful information. I quote:

We were able to ascertain a little information about La Gitana, which was a French brand created by Chapel Frés…but this relic from the early 20th century still sports its original horn stem, coupled with a novel aluminum tenon arrangement that we can only assume is meant to trap moisture. Although we aren’t sure how well it achieves this, it does do quite well at looking like an old-school James Bond accessory. It fits securely within a cork-lined mortise, which many briars of this period tended to have. https://www.smokingpipes.com/pipes/estate/france/moreinfo.cfm?product_id=196840

From that I learned that the brand was called La Gitana. It was a French made pipe from a company called Chapel Frés. It was made in the early 20^th century and the author had described the tenon system like the one I had. I also learned that the mortise had originally been cork lined to facilitate holding the tenon snuggly in the shank. This was what was missing in the pipe I had and it had been replaced with the foil mess that is seen in the above photos.

Armed with the name Chapel Frés I looked on Pipedia under French Pipe Companies and found the brand there. It stated that it came from that factory and the brand had been founded in 1904 in Saint-Claude, France. Here is the link https://pipedia.org/wiki/Chapel_Fr%C3%A9s.

Armed with that information I started my cleanup of the stem. I scraped away the foil that was wrapped around the tenon. I examined the bullet shaped cap on the tenon and figured out that it unscrewed from the tenon. I cleaned the metal underneath alcohol, cotton swabs, pipe cleaners and steel wool. I cleaned out the airway in the shank at the same time. The tube in the end of the tenon looked clean. I used alcohol, cotton swabs and pipe cleaners to clean out the inside of the bullet cap. I cleaned out the walls in the shank with pipe cleaners, cotton swabs and alcohol. It was a very dirty pipe that once it was clean had an interesting look to it. I cleaned up the inside of the bowl with a Savinelli Fitsall Pipe Knife. I scraped the walls clean of the carbon build up. I sanded the walls of the bowl with a piece of dowel wrapped with 220 grit sandpaper.To remove the damage on the rim top I topped the bowl until the damaged areas were removed and the rim top was clean. I used a folded piece of sandpaper to smooth out the inner edge of the rim and bring it back to round as much as I could. I washed down the exterior of the bowl with acetone on a cotton pad to remove the finish and the grim on the briar. The pipe looked really good at this point. I needed to round down the outer edges to bring it back to the shape it was when I started but for now it was clean. I took a photo of the stamping on the left side of the shank. The stamping is quite readable and clear.The tenon had some sticky substance for the glue on the foil on the tenon end. The tenon and threads still needed more cleaning to remove the oils.I filled in the tooth marks and troughs in the surface of the horn with clear super glue. I set the stem aside to dry.I decided to try to fit a cork in the shank to line it as suggested above. I cut away some of the excess cork from a wine cork I had. I trimmed it down with a Dremel and sanding drum until the diameter was close to the inside of the shank. I drilled it out with a series of drill bits starting small and working my way up to one that was close to the size of the tenon. I sanded down the cork exterior until it was a fit in the shank. I pressed it in place in the shank.I used a needle file to thin down the inner walls of the cork lining. It needed to be very thin to allow the tenon to fit in the shank. I tried to put the tenon in the shank. The fit was still not right. The cork was too thick to allow a fit. I pulled it out of the shank and slid it over the tenon. I sanded it down with sandpaper and files until it was a good fit. I glued the cork on the tenon and let it dry. When it cured I rubbed the cork down with Vaseline to soften it and allow it to slide into the shank. The fit was very good. I took some photos to show what the pipe looked like at this point in the restoration (I had also started the shaping on the bowl top). I polished the briar with micromesh sanding pads – wet sanding it with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. I wiped it down with a clean cloth after each pad. The grain began to pop and really stand out. Once the glue repairs cured I sanded them with 220 grit sandpaper to smooth out the repairs. I sanded them to blend them into the surface of the horn. I polished the stem with micromesh sanding pads – wet sanding with 1500-2400 and dry sanding them with 3200-12000 grit pads. I wiped the stem down with Obsidian Oil after each pad. I gave it a final coat and let it dry. The following photos show both sides of the stem. I worked Before & After Restoration Balm into the briar and the horn stem with my fingertips to clean, enliven and protect the wood and the horn. I let the balm sit for about 20 minutes and buffed it off with a soft cotton cloth. I took photos of the pipe at this point in the process to show what the bowl and stem looked like. I am happy with the look of the pipe. I polished the bowl and stem with Blue Diamond to polish out the scratches in the briar and horn. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The original patina on the bowl came alive with the buffing and worked well with the polished striated horn stem. The pipe has a rich look. The finished pipe is shown in the photos below. The shape, finish and flow of the pipe and stem work give the pipe a very classic look. The dimensions of the pipe are Length: 5 1/2 inches, Height: 1 1/2 inches, Outside diameter of the bowl: 1 1/2 inches, Chamber diameter: 3/4 of an inch. Thanks for reading this while I worked on it. It was interesting and unusual piece to restore and I really enjoyed the work.

A Challenging Restoration of Vintage Era First Choquin “A Metz”

8 Replies

Blog by Paresh Deshpande

I had been on a short leave to my home town last month and that is where this happened!!!!! Even though there are still a number of pipes from the two of the three inherited boxes of pipes waiting their turn for restoration, curiosity got the better of me and I could not resist the temptations of opening the third box. What happened thereafter is that I had to unpack all the pipes earmarked to accompany me to my work place for restoration in my free time which in turn invited the wrath of my wife who had helped in packing in the first place, and repack the newly selected pipes from the third box!!!!!! In addition to the regular collection of Barling’s, Charatan’s, Comoy’s and other assorted collection, I came across two pipes which caught my fancy!!!!!The pipe on the left bears a football stamp that reads “CHOQUIN” over “A METZ” and the one on the right side simply reads “GBD” (there are other stampings on the silver ferrule, details of which will be highlighted when it comes up for restoration). Both these pipes looked vintage and unique enough that I immediately Facetimed with Mr. Steve of rebornpipes. His admission that he is willing for a trade with me for these two pipes was an indication enough for me to know and understand their uniqueness!!! Thus these two pipes moved to the top of my unorganized and chaotic list of restoration.

The pipe first on my work table is the CHOQUIN. It is a huge pipe with a humongous acorn shaped smooth briar bowl with a steeply raking shank, the end of which is adorned by a fixed sterling silver ornamented ferrule. This similarly designed sterling silver also masks the tenon of the horn stem.The shank and the horn stem are connected by a push-fit type bone extension. The huge acorn bowl shows beautiful, large and loosely packed birdseye grain on the right side while mixed grain adorns the left side. The stummel on the front, back and the shank displays densely packed straight grains. The only stamping that is seen on this pipe is the football stamp on the left side of the shank and reads “CHOQUIN” over “A METZ”. For its age, the stamping is crisp and clear.This time around, before commencing the restoration process, I posted the pictures of this pipe on the Tobacco Pipe Restorers group on Facebook as my next project. In addition to input from my mentor, Mr. Steve, I collected a lot of valuable information from all the knowledgeable stalwarts. From all the input that I have gathered, the flat bottom bowl, the stamping, the sterling silver adornments, the bone shank extension and horn stem, I can safely place this piece as being one of the first A Metz pipes from the 1858 era!!!!!

INITIAL VISUAL INSPECTION
Well, even before I could start my initial visual inspection, I faced the first of the many numerous hurdles that I had to overcome during the restoration of this pipe. The shank extension and the stem would not budge even a millimeter to separate from the shank and the bone extension respectively. I remembered Mr. Steve referring to the technique of freezing the stuck parts in the freezer for a couple of hours for easy separation. I followed his advice and had to put the complete pipe in the freezer for a couple of hours as it could not be dismantled. True enough, the horn stem separated from the shank extension with the application of a little force, but the extension would not budge from the shank!!!! So I went back to Mr. Steve to tap in to his wealth of knowledge and experience. He suggested that I should apply the method of “Hot and Cold” shock treatment in which you gently and carefully heat the stuck part using a heat gun and then get it back in to the freezer. This process may need to be repeated a number of times before the parts separate. Well, I did exactly that, albeit heating with a hair dryer as I did not have a heat gun, and after 3/4 attempts, the extension finally separated from the shank!!!!The first thing that I noticed was that the shank extension and the mortise were completely filled with oils, tars and grime. The shank extension was filled to an extent that a pipe cleaner would not pass through!!!! How very much typical of my Old Man!!!!!!! Through all this muck, just a swipe of the bone extension with a cotton swab dipped in isopropyl alcohol revealed no apparent damage to the shank extension. Cleaning this would need to be a very careful, meticulous, time consuming and a tedious process given the delicate structure of such a vintage bone. Likewise, the tenon also was filled with oils and grime. Air flow through the stem was laborious to say the least!!! Both the upper and lower surface of the horn stem shows significant damage. The lower surface is peppered with 3-4 worm holes with one significantly larger than the other. Thankfully, it had not migrated through the upper surface!!!! The tenon is completely and permanently encased in the sterling silver ornament. The condition of the stummel was an equally horrendous story. Firstly, the rim top is heavily covered in overflowing lava. The overflow is so heavy that it has accumulated over the rim surface in blobs of dried tar and tobacco oil which can be seen in the subsequent pictures. This overflow had not restricted itself to accumulation on the rim top, but has spilled on to the stummel surface covering the stummel in sticky grime which has attracted more dirt and dust giving the stummel a dull and lackluster appearance. The overflowing lava has even accumulated in the junction where the shank and bowl are joined. Some dents and dings are seen on the surface through the overflow and I do not envisage any major issue like the ones I faced while working on an Imperial Yello-Bole Carburetor that I had I restored. However through all this dirt, tar, oil, grime and damage, lovely grains can be seen on the sides and the shank. It will be a challenge to address these issues and make the grains to reveal themselves in all glory. The chamber is no different story!!! There is a thick build up of cake in the chamber. The inner edge of the rim is covered under the thick cake and as such, its condition can be commented upon only after the cake has been scrapped. The outer edge of the rim, however, shows significant damage in the form of dents, dings and deep scratches to the front in 12 o’clock direction. The cause for this damage is….. Oh, forget it, let’s not even go there!!!! The condition of the inner walls of the chamber can be ascertained only after the chamber has been completely reamed devoid of any cake, but I do not foresee any major damages here as the stummel feels solid to the touch and this huge solid piece of briar can sustain some serious damage. You have to feel the stummel in your hand to understand what I am trying to write. It is one heavy and handful of a pipe!!!!The sterling silver ferrule and tenon ornament was black as is typically seen in heavily oxidized silver. However through all this discoloration, delicate, intricate decorative design can be appreciated. This is another pointer towards the vintage of this pipe.THE PROCESS
I started the process of restoration by polishing the sterling silver ornaments at the shank end and tenon with pipe ash as suggested by Mr. Steve. This was followed by reaming the chamber with size two of the PipNet reamer head and progressing through to size four. Yes Sirs, there is no typo error!!! It is indeed PipNet and not a Kleen Reem reamer as you have gotten used to reading in my write ups !!!!!! Mr. Steve has sent me a set along with some beautiful pipes that I had got from him. I followed up the reaming with scrapping the remnants of the cake from the walls, flat bottom of the chamber and the rim top surface with my fabricated knife (Oh, how I long for a Sav Fitsall reaming knife!!! Hope you are reading this Steve Sir). The cake was so hard, that I invariably ended up scratching the flat bottom surface while scraping. Once the cake was reamed back to the bare briar, I used a 150 grit sand paper followed by 220 grit sand paper to remove all the traces of remaining cake and also to smooth the inner walls of the chamber surface. Finally, to remove the carbon dust, I wipe the chamber with a cotton pad wetted with isopropyl 99%. I gently scrapped the rim top surface with a sharp knife. Removing all the cake from the chamber and rim top revealed that firstly, the rim was out of round and secondly was a web of fissures along the internal walls. There was one crack, which showed prominently after a cleanup with Murphy’s oil soap, bothered me and can be seen in the pictures below which has been highlighted by a red circle. I shared these images with Mr. Steve and Mr. Dal Stanton for their opinion as to the extent of damage and further repairs. They too expressed fears that the crack may have migrated through the stummel. Mr. Steve suggested picking the crack on the top of the rim using a toothpick and filling it with CA superglue. I decided that I would address this issue later after further investigations. I cleaned the internals of the shank, shank extension and the stem using hard bristled and regular pipe cleaners, q-tips, shank brushes, all generously dipped in isopropyl alcohol. I had never used such drastic measures like initially cleaning the bone shank extension by carefully inserting a round needle file for creating an opening through which pipe cleaners could pass through for subsequent cleaning. The heap of pipe cleaners and q-tips that are seen in these pictures are just the proverbial tip of the iceberg. I must have gone through an entire packet of 50 of both types of pipe cleaners, in addition to the q-tips and brush cleaning!!!!! To further deep clean and refresh the internals, I used cotton and alcohol soaks. Using a cotton ball to create a wick, I inserted it through the mortise and into the airway. I then stuffed the bowl with tightly packed cotton balls and placed it in bowl filled with rice grains to provide stability. Similarly I made a tight cotton wick and inserted it through the bone shank extension to further remove all the oils, tars and smells. With a large eye dropper, I then filled the bowl and the bone shank extension with isopropyl 99% until it surfaced over the cotton. I refilled the alcohol in a few minutes after it was absorbed into the cotton balls. I put the stummel and the bone shank extension aside for several hours to soak. After some time, the cotton and the wick were soiled. I discarded the expended cotton and wiped the bowl and the bone shank extension with paper towel. To make sure all was clean, I used a cotton bud and pipe cleaner dipped in isopropyl 99% and they came out clean. I cleaned the stummel with undiluted Murphy’s oil soap and Scotch- Brite pad and rinsed the stummel under running tap water. This cleaning helps in bringing to the fore any other damage which could be hidden under all the dirt and grime. Fortunately, there were no major dents, dings or gouges to the stummel. There were a few minor ones which I think would be addressed when I would sand the stummel surface and subsequent micromesh polish. I dried the bowl with a paper towel and soft cotton cloth. Initially I had decided that I would not be topping the rim top and maintain its original profile. However, in order to ascertain if the crack had migrated through the stummel, I decided to top the rim surface. This would also help to address the numerous dents, dings and scratches on the rim’s top surface and also to remove traces of lava overflow. I topped the rim surface on a 220 grit sand paper. Though it is recommended to have a wooden board with the 220 grit sand paper firmly fixed over it, I just keep the sand paper on a flat table top, holding it firmly with my left hand and rotating the stummel rim top over it with my right hand. I have come to realize that this set up gives me lot more freedom of movement, better control and convenience of storage. Fortunately, it was revealed that the supposed crack was superficial and had not migrated through. Staying with the rim, the next issue that I addressed was the inner rim edge. With a folded piece of 180 grit sand paper pinched between my thumb and fore finger, I created a light bevel on the inner edge. This addressed the issue of uneven and out of round inner edge. The damage to the outer edge was addressed to a great extent when I had topped the rim top surface. Whatever little dents and nicks that remained on the outer edge were very minor, though visible, and I decided to let them be.I sand the stummel surface with a 220, 320, 600 and 1000 grit sand paper, in that order, to remove the minor scratches and marks on the rim and stummel surface. I frequently wiped the sanded surface with a moist cloth to remove the briar dust and also to check the progress of my work. Once I was satisfied with the match, I followed it up by micromesh polishing pads, wet sanding with 1500 to 2400 grit pads. Again, I wiped the bowl with a moist cotton cloth after each pad. I used the 3200 to 12000 grit pads to dry sand the stummel to a nice shine. I was disappointed when after all my efforts up to this stage; there were some very minute chips that were visible in pictures. But overall, at this stage of restoration, the entire bowl, rim top surface and shank is looking fresh and clean. Even though some of the dents and chips could not be completely addressed and are visible only on very close visual scrutiny, in my view, they lend this pipe a battle scarred warrior like a character. I rubbed a small quantity of “Before and After Restoration Balm” with my fingers deep in to the stummel surface. What this balm does is it revitalizes the briar wood and breathes a new life in to the briar. It’s amazing to see the transformation as the balm works its magic on the briar wood. I further buff it with a horse hair shoe brush. Turning my attention to the horn stem, I cleaned the stem surface, including the worm holes, with q-tips dipped in isopropyl alcohol to remove all the dirt and dust before the fill. I filled the worm hole on the bottom and top surface with clear CA superglue and set it aside to cure. Once the superglue had cured, I sanded the fills with a flat head needle file. To further match the fills with the surface of the stem, I sanded it with 220, 320, 600 and 1000 grit sand paper. I wiped the stem with cotton pad dipped in alcohol to remove the resultant dust. I rubbed some extra virgin olive oil in to the stem and set it aside to be absorbed in to stem. A few minutes later, I polished the stem and also the bone shank extension with micromesh pads, wet sanding with 1500 to 2400 grit pads and dry sanding with 3200 to 12000. I rubbed a little extra virgin olive oil in to both after every three pads. The stem is now nice, smooth and shiny while the extension though smooth and shiny, still had the golden brownish hues of the tobacco oils and tars. I was wondering as to next course of action, Mr. David Goostree, an experienced member from The Tobacco Pipe Restorer group on FB, provided valuable information that the bone is similar to a Meer and absorbs oils from the tobacco and colours just like a meerschaum. Another issue taken care of!!! To finish the restoration, I mounted a cotton cloth buffing wheel to the Dremel (actually it is not the brand machine, but a local machine which is similar). I set the speed at about 40% full power and applied White Diamond compound to the entire pipe. Afterwards, I wiped/ buffed the pipe with a soft cotton cloth to clear it of any leftover compound dust. I then mounted another cotton cloth wheel to the polishing machine, maintaining 40% speed and applied several coats of carnauba wax. I finished the restoration by giving the entire pipe a rigorous hand buffing using a microfiber cloth to raise the shine further. In my excitement mixed with apprehension in using the polishing and waxes for the first time, I completely missed out on taking any pictures. The completed pipe looks lovely, fresh and vibrant. Thank you for having the patience to reach this far while reading the write up. Your comments are of utmost importance to me for improving my skills in restoration process as well as writing about it. Cheers!!!!!

PS: – During this journey of restoring this beauty, I had, on occasions felt low and demoralized as issues kept cropping up like the supposed crack to the stummel, the shank extension not supposedly cleaning up as I had incorrectly anticipated and the 2/3 occasions when the my polishing machine slipped on the surface and caused very minor scratches on the stummel. However, my Guru and mentor, Mr. Steve was always around with his words of wisdom and encouragement to egg me on towards completing this project. Thank you once again, Mr. Steve. I would like to thank all the esteemed members of “The Tobacco Pipe Restorer” group on FB for their interest and valuable inputs, which made this project interesting.

Restoring a Brand I had never heard of before – A Peter Piper 525 Billiard

5 Replies

Blog by Steve Laug

Alex dropped by the other night to drop off a pipe off and to pick up one I was working on for him. He also brought this little billiard with him for me to work on. It is stamped Peter Piper over London Made on the left side of the shank and on the right it is stamped Made in England over the shape number 525. It is a brand I had not heard of and it was an interesting little pipe. It is a reddish coloured billiard. There are some scars and nicks on the surface that are part of the pipe’s story. The finish was worn and there were sticky marks on the shank and sides of the bowl that could have come from a sales label. The rim top had marks on it that looked like it had been tapped out on a hard surface and damaged the briar. The stem had a dental bit made for a pipe smoker with dentures. It had a tall lip on the topside of the stem that could be held behind the top denture. On the underside were two grooves cast in the surface that could be held with the bottom teeth. It gives the pipe a unique look. I took some photos of the pipe at this point to show its condition before I started the cleanup. I took some close up photos of the rim top and the stem to give a clearer picture of the condition of the pipe. The photo of the rim top show the nicks and damage clearly as well as damage to the inner and outer edge of the rim. The stem is very oxidized but there are no tooth marks or chatter on the surface.I wanted to try to figure out where the pipe had come from and who had made it. It was a stamping I was not familiar with. The London Made stamp on the left side and the Made in England stamp on the right side seemed to point to an English pipe making company. I have seen some anomalies in the past where pipes stamped this way were actually made in France. I was curious to see what was behind this pipe.

I turned first to Pipedia.org to see if there was any information on the site about the brand. I check under pipes Made in England and found nothing there. I entered the Peter Piper name in the search box on the site and it took me to the list of French Pipe Makers. Sure enough on the list there was the Peter Piper name. I clicked on that name to see what I could find and it gave me the following information.

The Peter Piper trademark was first applied to a pipe in 1925, and granted on June 1, 1926 to Cadogan France Limited, whose offices were in London. Despite this, the pipe was made at the Marechal Ruchon factory in St. Claude, France. And, despite this, as the pipe was often stamped with London nomenclature. An excellent example of how blurred international borders became where Oppenheimer and Cadogan were involved. For more information see GBD. https://pipedia.org/wiki/Peter_Piper

I followed the link to the “for more information see GBD” statement at the end. I quote that below in part.

Other brands of this time were marketed with even larger independence. The Dr. Plumb’s had been developed by the Parisian sales manager J.B. Rubinovich in 1925 when GBD France needed “a cheap line of pipes” especially for the Canadian market. In fact, the new brand was nicknamed for Mr. Rubinovich’s secretary Leslie W. Plumb, whose most important business was “to doctor figure” the ledgers. Dr. Plumb’s made their way not only in Canada. – The Peter Piper, as well as the Dr. Plumb’s produced in Saint-Claude, is another great example that stampings like “London made” or “London England” are not always totally trustworthy also on older pipes! Not only today numberless brands are made in Saint Claude and stamped with whatever the buyer wants to be stamped… https://pipedia.org/wiki/GBD

I turned to the Pipephil website to see if there was any further information on the brand and found the follow confirmatory information:

… the pipes were stamped “London England” in a straight line, even if they were sometimes crafted in France. http://www.pipephil.eu/logos/en/logo-gbd.html

Now I knew what I was dealing with. Interestingly it was a French Made pipe stamped London Made and Made in England. It was made by GBD France for the Canadian Market to be sold alongside of the Dr. Plumb brand. I love the bit of intrigue that is mentioned above – that the Dr. Plumb brand was named after a secretary, Leslie Plumb whose job was to doctor the ledgers. These pipes made their way to Canada as well as other countries. It is also great proof that the stamping may not always tell the full story.

Armed with this information I started the process of restoration. I topped the bowl with 220 grit sandpaper on a board. I worked the top in a circular motion on the sandpaper to remove the damaged surface and the edges of the bowl. I was so engaged in this restoration that I forgot to take a picture of the rim top after topping. I moved quickly into polishing the rim with the micromesh sanding pads. I wet sanded it with 1500-2400 grit pads and dry sanded it with 3200-4000 grit pads. I wiped it down after each sanding pad. Once I had polished it through the 4000 grit pad I stopped and stained the top with a Maple stain pen to match the rest of the finish. The rim top matched well but still needed to be buffed and polished to blend the stain into the finish of the bowl.I polished the exterior of the bowl and rim with micromesh sanding pads – wet sanding it with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. After the polishing I could see the dents and scratches in the bowl sides and bottom. It was time to apply a little steam and see what I could do to raise them. Unlike those who have steam irons that they abscond from their wives to steam their pipes I use a knife and wet cloth. I heat the knife over the flame of a burner on our gas stove until it is hot. I put the wet cloth over the dents and apply the hot knife to the cloth. I repeat the process until the dents have been raised. In this case it worked pretty well. I was able to get the majority of them out of the briar. The photos tell the story. With the externals cleaned I needed to clean the internals. I had forgotten to do the cleaning until now. The pipe looked pretty clean… in fact I kind of wondered if it had been smoked very much. I cleaned the mortise and shank with alcohol, pipe cleaners and cotton swabs. I cleaned the airway in the stem at the same time (you will notice that the stem is quite black at this point. I had already sanded it with 220 grit sandpaper as noted below).I worked Before & After Restoration Balm into the briar with my fingertips to clean, enliven and protect the wood. I let the balm sit for about 20 minutes and buffed it off with a soft cotton cloth. I took photos of the pipe at this point in the process to show what the bowl and rim looked like. I am happy with the stain match on the rim top. I sanded the stem surface with 220 grit sandpaper to remove the oxidation. I worked on the angles of the dental bit and the grooves on the underside of the stem until I had removed oxidation.I polished it with the micromesh sanding pads – wet sanding it with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. I rubbed it down with Obsidian Oil between each pad. I polished it further with Before & After Pipe Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil and set it aside. I polished the bowl and stem with Blue Diamond to polish out the scratches in the briar and rubber. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The original patina on the bowl came alive with the buffing and worked well with the polished black vulcanite stem. The pipe has a rich look. The finished pipe is shown in the photos below. The shape, finish and flow of the pipe and stem work together like other GBD pipes. The dimensions of the pipe are Length: 5 1/2 inches, Height: 1 3/4 inches, Outside diameter of the bowl: 1 1/8 inches, Chamber diameter: 5/8 of an inch. I have one other pipe to finish restoring for this fellow before it will go back to him. I look forward to seeing what he thinks of it.

Converting a Zettervig Freehand into a Churchwarden

Restoring a Dunhill Root Briar EK Square Shank Panel Billiard

2 Replies

Blog by Steve Laug

The next pipe on the work table is a Dunhill Panel Billiard. It is a smooth briar pipe that is very dirty. It has four panels around the bowl and the corners are rounded. The shank is square as well and ends with a square tapered stem. The briar is worn and tired with oils in the briar. The rim top had a build of tars and lave that flowed over it from a thick cake in the bowl. The shank is stamped on the left side EK followed by Dunhill over Root Briar. On the right side it is stamped Made in England with an underlined superscript ⁰ followed by a 4 circled followed by an R. The stem has the standard white spot on the top side. It was oxidized and had some calcification build up on the first inch of the stem that appeared to have come from a rubber pipe Softee bit. The stamping is easily interpreted. The left side EK is the shape stamp for a panel billiard. The ROOT BRIAR stamping is the line of Dunhill pipes. The right side stamp superscript O tells me that the pipe is dated to 1960. The circled 4 is the size of the pipe (group four) and the R is the stamping for a Root Briar. Jeff took photos of the pipe before he started his cleanup work. Jeff took photos of the top, sides and the bottom of the bowl to show the condition of the briar. The topside showed a thick lava build up flowing out of a thick cake in the bowl. It was hard to know if there was damage on the outer or inner edges of the rim. The sides of the bowl show dents and wear but also some stunning birdseye and cross grain. Jeff took photos of the stamping on the pipe shank. It is faint but readable. It is as I wrote about above.Jeff took a photo of the stem to show the fit against the shank and the white spot. He also took photos of the top and underside of the stem showing the tooth chatter and marks as well as the calcification on the surface of the stem.I wanted to certify the date for myself so I had a look at the PipePhil site and looked the dating and stamping information (http://www.pipephil.eu/logos/en/dunhill/cledat-en1a.html). Using the charts there I was able to confirm that pipe was made in 1960.

I also looked on the Pipedia site and read as much information as I could find regarding the Root Briar line (https://pipedia.org/wiki/Dunhill#Root_Briar). Here is what it said: The line was… Introduced in 1931 and highly prized because the grain is more pronounced in this finish. The Root Briar finish required a perfectly clean bowl with excellent graining. Therefore, it is the most expensive of the Dunhill pipes. Corsican briar was most often used for the Root finish, since it was generally more finely grained. This is a rare finish, due to the scarcity of briar suitable to achieve it. These pipes are normally only available at Company stores, or Principle Pipe Dealers…

Jeff reamed the bowl with a PipNet pipe reamer and followed up with a Savinelli Fitsall pipe knife to remove the cake. He scrubbed out the mortise and the airway in the shank and the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the bowl, rim, shank and stem with a tooth brush and Murphy’s Oil Soap to remove the oils, lava and tars on the rim and the grime on the finish of the bowl. He rinsed it under running water. He dried it off with a soft cloth. The rim was thoroughly cleaned and without the grime the finish had some rim darkening that hid the grain. The vulcanite stem would need to be worked on but I really like the profile it cast. I took photos of the pipe to show its condition before I started my work on it. I took close up photos of the bowl and rim top as well as the stem. You can see the condition of the rim top and bowl in the first photo. Jeff was able to remove all of the tar and oils but you can now see the damage and darkening around the inner edge. The vulcanite stem had tooth chatter and some light tooth marks on the top and underside of the stem both on the surface of the button and just ahead it. There was one deeper tooth mark on the topside near the button.I started my refurbing work by addressing the darkening on the rim top and inner edge. I first sanded the inner edge with a folded piece of 220 grit sandpaper. I then lightly sanded the rim top with a worn piece of 220 grit sandpaper. I find that using a bit more tired piece of sandpaper works wonders on the dark edge without scratching the rim surface like a new piece. I followed that by wet sanding it with 1500-2400 grit micromesh. I sanded the rest of the pipe with the micromesh at the same time. I dry sanded it with 3200-12000 grit sanding pads. I wiped down the bowl after each pad with a damp cloth. The grain on the rim top began to shine through and the finish was in good condition under the darkened grain. I rubbed down the smooth briar with Before & After Restoration Balm. I worked it into the smooth surface of the briar on the rim, sides and the bottom of the bowl with my fingertips. I wanted to make sure that the balm got deep into the briar to do its work. The balm works to clean, enliven and protect the briar. I let it sit for a little while and then buffed with a cotton cloth to raise the shine. The following photos show the bowl at this point in the restoration process. The rim looks much better than when I started but still needs to be polished and buffed to raise a shine on it. I sanded out the tooth chatter and tooth marks on the stem surfaces. I sanded the rest of the stem with the sandpaper to remove the oxidation on the stem surface.I polished the vulcanite stem with micromesh sanding pads – wet sanding with 1500-2400 grit sanding pads and dry sanding it with 3200-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it further with Before & After Pipe Polish – both Fine and Extra Fine polishes and gave it a final coat of Obsidian Oil and set it aside to dry. I the polished stem and the bowl with Blue Diamond to polish out the remaining small scratches and raise the shine. I gave the bowl and the stem multiple coats of carnauba wax then buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. I left the some of the dents in place as I did not want to sand and ruin the patina. I think they are marks of the journey the pipe has taken. This turned out to be a beautiful pipe in terms of shape and finish. This is a nice looking Dunhill Panel Billiard pipe. The finished pipe is shown in the photos below. The dimensions are Length: 5 3/4 inches, Height: 1 3/4 inches, Outside diameter of the bowl: 1 1/4 inches, Chamber diameter: ¾ of an inch. Thanks for walking through the restoration with me as I worked this beautiful Dunhill Root Briar Panel. Thanks for looking.