Guest Blog by Robert M. Boughton
Member, International Society of Codgers
Member, North American Society of Pipe Collectors
http://www.naspc.org
http://www.roadrunnerpipes21.biz under construction
http://about.me/boughtonrobert
Photos © the Author except as noted
NOTE: ALL BUT ONE TITLE OF RAYMOND CHANDLER’S NOVELS ARE INCLUDED WITHIN THE TEXT OF THIS BLOG, THE MISSING ONE BEING IN NO WAY VIABLE WITHOUT BECOMING RIDICULOUS. I HAVE ALSO ADDED CERTAIN LESS OBVIOUS REFERENCES FROM THE GREAT NOVEL. I WANT TO BE THE FIRST TO POINT OUT THAT THIS SINCERE HOMAGE IS NEVERTHELESS WANTING. AS PARTIAL COMPENSATION, I OFFER THE PIPE THAT IS THE SUBJECT OF THE RESTORATION – FREE, NO GIMMICKS OR POSTAGE – TO THE FIRST READER WHO IDENTIFIES THE MOST TITLES AND OTHER ASSOCIATIONS. IN ORDER NOT TO MAKE THE TASK TOO EASY, I WILL LET THE READERS SOLVE THE MYSTERY OF THE SPECIAL CONNECTIONS. ONE HINT – THE 1940S SLANG USED IS A DEAD END. POST ANSWERS IN THE COMMENTS SECTION. GOOD LUCK!
From thirty feet away she looked like a lot of class. From ten feet away she looked like something made up to be seen from thirty feet away.
— Raymond Thornton Chandler (1888-1959), British-American writer of poems, essays, literary reviews, screenplays and hard-boiled detective tales, through his great character Philip Marlowe in “The High Window,” 1942
I was wearing my powder blue boxers. I was unkempt, dirty, unshaven and sober, and I couldn’t care less who knew any of it. The sun was a big dark orange rooster mute with nothing left to crow about other than another shot at a life filled with danger, which reminded me I had not slept going on five days. The freshness of the Sandia foothills was fooling no one who has blown the kind of time I have in this high desert burg, even if that steady, sandy ascent into the mountains was too formless to see yet.
The temperature during the longer shifts of light than dark grew hotter with each twenty-four-hour trudge that dragged on that miserable stretch, late July into August. The dog days neared their end with no such luck appearing on the horizon for the solar blaze. The sultriness outside was the kind that had nothing to do with dryness or humidity. The oppressiveness that hung over the entire overblown town was all about the barometer. At night the blood red color of the fourth planet from the sun, and the fact that it was closer to our little world than it had been in eleven years, only made the air outside seem hotter.
The weather fat-heads kept predicting rain but I hadn’t seen any since the part of the year I liked best, what the locals called the monsoon season with the kind of cock-eyed, soppy buzz that got under my skin, right after the mere sound of a Christmas carol. Last I heard, a monsoon was driven by large bodies of surrounding water. The whole forsaken state was landlocked. While I’m on the subject of things I dislike, I might as well mention I’m not a big fan of opera – excuse me, the opera. I’ve had to scratch under the collar through my share of these shows and would be none the poorer if I never sat through another. Carmen was okay, come to think of it. At least you could say that little tease got what she had coming.
The torridness was part of the reason I didn’t bother to put on one of my suits. All of them were the same straight cut, most black or gray but a few with some color to them, like a rumor about me that was going around. Not that any of those stories played a part in my trouble sleeping The other excuse for not making myself more decent was that every one of my flannel uniforms was at Owen’s, my tailor, being taken in because of the weight that was sapped out of me. I was everything the well-dressed pipe restorer who lived alone ought to be. I was waiting on an eight thousand dollar check to clear the bank, and until that happened I wasn’t going anywhere.
The case I was working was a tough nut to crack. Sometimes a gig was all aces, but this was bad news that made a big part of me not even want to cool down. My biz was to fix the brodie, only in this case the charge sheet of senseless brutalities was full with counts. I’ve never hung it up unless the pipe was done for, as in ready to stoke the fireplace or campfire. Briar is a stern wood, though, and I had to take a shot. In the crowd she came from, the little sister looked plenty ritzy. Away from the crowd made her more into something any group would give a wide berth.
Some creep did a real number on this one. She still had a swell figure and I could tell she was a dish back in the day, but that was long ago and far away, as the kid from Hoboken crooned. In my book, a nice body is the important thing anyway. Whatever genius plugged this dame had to be whacky or a twit. As I saw it, the heartless S.O.B. deserved the hotsquat. I’m not one to lash out unless I’m threatened to my face, but if I had nabbed him, he wouldn’t have known I had a beef until I put the kibosh on him. Not that I had any idea to dog the numbskull. It’s not like I had a Geiger counter tuned to a man’s sweat, and murder is about as simple as common sense is common. Besides, by then he was long gone.
I picked the broad up for a five spot, but not for anything sappy, just to save her from the meat wagon. I kept her wrapped up like I found her and got her safe and sound to my office on Agnes Avenue. That’s also my cave, which makes it my castle. My heater is the only insurance policy I carry.
I’ll give you the dope, straight up. She was worked over pretty good if that word can be used in this scenario. Her kisser and most of the rest looked like a body that was dragged along a stretch of old road strewn with potholes and broken liquor bottles. Maybe she took a dive from the high window, but that would have spelled farewell my lovely for this client. Then there was the forehead that looked to have been pistol-whipped.
This little gal, no big surprise, had a bad dose of amnesia. The little bit of I.D. I found on her was all but eroded by years of grime on top of all the pushing around. All of my local pipe gumshoes were sure they recognized her as Alpha, an Israeli, on account of a distinctive birthmark forming a curious A. I’d known a couple of the type, and something about this A didn’t jibe.
I brought my friend Steve Laug, a fellow pipe investigator north-northwest of here in Canada, up to speed with my progress. Laug was the best P.I. in the biz and had profiled more pipes than I had ever dreamed of in my humble philosophy, to crib from one okay yarn spinner. I don’t buy a word of the stories that some fellow named Marlowe wrote any play credited to another Brit. Anyway, Laug also had more skill patching up the abused and maimed than anyone else I knew.
He was the one who spotted the resemblance of my victim to one of the classic models from the Dr. Grabow stable, the 42 number. Laug shot me the profile he did on one going by the name of Westbrook about a year before. One mugshot in particular that Laug snapped of the Westbrook gal after he started cleaning her up showed the unmistakable genetic marker of my girl. So they were related, but how? That was for me to uncover.
Courtesy of S. Laug, P.I.
No man could miss the hot curves on Laug’s Westbrook knockout compared to those of my Jane Doe, even after someone put the screws to her. I followed Laug’s tip to another lead that took me to a real treasure trove, including a group shot of Doc Grabow’s X Series Continental Line, class of ’81. Letting my eyes move over the lines and curves of these gorgeous creatures clued me into why the doc rated them X, if you get my drift.
Oh, so many beauties in this world, and so little time. Still not being able to put a name to my little darling was driving me bat nuts, so I gritted my teeth and went to the archives, as I like to call the place. It’s a reputable joint run by a Frenchman known on the streets as Pipephil. First I inquired about Alpha and was introduced to a couple of sweet numbers that showed two styles of that outfit’s A, both about as similar as Laurel and Hardy.
Roaming still deeper into the organized labyrinths of Pipephil’s place, I came across an A type that was a virtual twin of my Jane Doe, belonging to a swell called Douwe Egbert, a Dane no less. That was when I got my big break and hit the jackpot with a connection to another part of the same clan, a blue blood great Dane from the house of Elbert Gubbels & Sons of the Royal Dutch Pipe Family. They went belly up a few years back, but not before conceiving a certain new acquaintance of mine, even if they adopted her out and didn’t give her their own name, as if it was too good for her. All that digging paid off. Amphora was her name, and a beautiful one at that, from the Greek for a double-handled thingy used back in ancient times to hold wines and oils and whatnot. I looked at the facial big boned structure on Amphora and got it right off.
Relieved to have put a name to my innocent friend, I started saying it out loud, over and over, as I began the tasks of cleansing, mending and restoring Amphora to health. It was a dirty job, as some guys liked to put it in those days, but that was my specialty. After the initial wipe with soft cotton cloth strips soaked with purified water, I made the first definite visual confirmation. The words were legible only because I knew what I was looking for from a gander at one very crisp tattoo on the left hip of one of Pipephil’s collection.
I never could get my Amphora’s number, maybe because she was too classy to let a man of my position become so familiar.
All I can say about the next step, when I finished washing her body and went to work on that wrecked forehead, is that I was glad she was still out cold. I had to get rough, see. There was nothing plastic about the surgery I had to perform, but it was cosmetic, alright. The job started out gritty and got worse, about as low as I ever go, with 80 paper followed by 150 to clear away the char alone. I’ve seen my share of bad burns, but this was as close to a crispy critter where the victim was still alive as I hope I ever see.
The harsh part was what followed. I had no choice but to put a file to her scalp, behind the forehead that was caved in, to fix the mess the best I could. After that part I took a deep breath and let it out, like a tea kettle giving off steam right before it hits full boil. I stepped back to look over my handiwork so far. The job wasn’t perfect, but that kind of work is above my paygrade.
I did most of the mop-up of that scene of the unfolding drama with what seemed like endless paperwork. Let’s face it, this job runs on paperwork. Fine tuning with the full scale of micro mesh was a pleasure.
Maybe I took a liberty at that point, but I could not control the impulse. Besides, I told myself, Amphora might very well awaken from her ordeal of the long goodbye, which she was lucky to survive. and not even notice the patchwork I did. That last part was if Lady Luck shined on me, but who was I kidding? I don’t place my faith in luck and never met a dame, not the type I liked to be seen with in public anyway, who didn’t know the instant a single strand of hair went amiss. The best I could hope for was that she would keep quiet about it.
To give Amphora a healthy tone more like her old self, at least as I imagined she once was, I gave her a thick coat of high fashion skin colorizer called Lincoln, a burgundy color that I knew I could lighten to a more natural auburn. I applied some heat to fix the solution so it wouldn’t run and with a patience that was anything but natural to my usual personality used a three-stage, six-pad micro mesh conditioner process. I finished that part with a light rub of four-ought steel wool.
I saved the most slender part of Amphora for the last. There were scratches along both sides, but no evident mayhem.
This called for more paperwork, forms 180, 220 and 320 to start.
I followed up with form 400 and the full treatment of micro mesh conditioner.
The conditioner was old, and I could see it was out of date. I checked my mail and found the new supply was in the box. There’s a saying in billiards that the cue is only as good as the player, but a cue that’s an inch off from warping is plain bad news. I would never carry a heater with a barrel that’s off, or one that’s not nice and tight all over. I don’t even care for the 1911 .45 that’s designed that way for tactical reasons. I had a playback, you could call it, to other times in my career when I re-stocked my supplies.
Repeating the full process with the new pads, I found that even an old dog can learn a new trick, in this case to keep your heater clean and well-oiled, if you get my meaning.
Amphora was waking up and starting to squawk. My only retort was that medicine never tastes good, and I gave it to her.
She was lucky her insides were cleaner than she had been outside, and I only had to give her the one dose.
While Amphora was still coming around, I found the makeup any lady of quality won’t leave home without putting on, just the usual compounds and waxes, and buffed her up.
My insomnia and other personal stresses had made me ready to go for the big sleep, but I was over all that and was just about to take a seat on the new recliner I bought for my new digs in a more genteel part of town, and relax with a long, full-bodied, folksy Ukrainian tiger I came across at one of those new places a man can now find such pleasures. I even sat down with the broad in my hands, feeling her fearful symmetry that only the Master Craftsman Himself could dare frame, and was about to light her fire for a quickie before taking a nice long snooze.
That was when Amphora woke up and started to yap.
SOURCES
http://www.gutenberg.ca/ebooks/chandlerr-bigsleep/chandlerr-bigsleep-00-h.html
http://www.cultureify.com/1940s-slang-lingo-phrases/
http://graphics.latimes.com/finding-marlowe/
https://rebornpipes.com/2015/08/29/restoring-a-dr-grabow-westbrook-42/
https://sites.google.com/site/seanspipes/home/dr-grabow-shape-charts
https://pipedia.org/wiki/Shalom_Pipe_Factory
https://pipedia.org/wiki/Alpha
The fourth and fifth pictures remove the mystery of the knurled edge on the bottom of the bowl that showed in the first photo. You can see in that photo of the bowl bottom that the silver disk looks like it was made to be rotated. We talked and my brother bid and won the pipe (I can’t wait for the pipe to get here so I can check this out). The fifth photo shows the inside of the bowl. The top of the disk appears to be a cup intruding into the bowl bottom. It was really odd looking.
That information was helpful on many levels. He did not however have any photos or drawings of the pipe or pictures of the advertisements. I wanted to know if the bottom “sump” as he called it was pressure fit or threaded and screwed into the briar. I wanted to know if the bottom of the bowl was damaged or if the “sump” sat as it was supposed to flush with the bottom. It was hard to tell from the photos. I wanted to know was the “wads” were that sat in the sump. From the look of the bowl bottom it appeared that the “wads” may well have been lozenges that fit in the curved cup and then sat flat in the bottom of the bowl. But what did they look like? More research would be needed to answer these questions. But at least the mystery of the knurled edge peaking from the first photo was solved. It was a single unit with a cup on the inside of the bowl. I could not wait to see this in person and “fiddle” with it.
He gave the dimensions of the pipe as follows: overall length: 5 ½ inches, bowl height: 1 ½ inches, diameter of the bowl: 1 5/8 inches, bore diameter: 7/8 inches, bore depth: 1 1/8 inches and the weight: 44 grams or 1.6 ounces
I took it out of the alcohol bath and heated the disk with the flame of a lighter. I used a pair of pliers to hold tightly to the edge of the disk and I was able to twist it out of the bowl. Once it popped free I could undo it by hand. The first photo below shows the inside of the silver disk. The second shows the knurled outside.
To remove the damage to the rim top and edges I topped the bowl on a topping board with 220 grit sandpaper.
There were some nicks around the hole in the bottom of the bowl so I sanded those smooth with sandpaper and then cleaned out the threads in the briar with a cotton swab and alcohol.
I used the brass bristle brush to scrub the threads and the cup on the disk. I cleaned it afterwards with cotton swabs and alcohol.
I used a cotton swab to coat the threads on the disk with Vaseline and turned it into the bottom of the bowl. I wanted to make sure that I could easily turn the disk by hand.
I cleaned out the internals with pipe cleaners, cotton swabs and alcohol. It was pretty clean thanks to my brother. It did not take too many to clean it out.
I sanded the bowl and stem with a medium and a fine grit sanding block. The pipe is beginning to look really good. I had to make a decision how far to sand the bowl and how many of the original dings and dents to remove without changing the “story” and character of this old timer.
I heated the briar and then stained it with dark brown aniline stain cut by 50% with isopropyl alcohol. I flamed it to set the stain and repeated the process.
I wiped down the stain with alcohol dampened cotton pads to make it more transparent and make the grain stand out. At this point the fills stood out and I would need to address them a bit differently.
I used a black Sharpie Permanent Marker to draw some lines across the fills and blend them into the grain on the pipe. I then chose to give the bowl a second contrast staining using a Cherry Danish Oil stain. I find that the combination of the black marker and the cherry stain blends the fills better than a brown stain. The combination of the brown and the cherry stains gives depth to the finish so I like using them together.
Once the cherry Danish Oil stain dried (overnight) I buffed it lightly on the wheel with Blue Diamond and then gave the bowl a coat of carnauba wax. I hand buffed it with a microfibre cloth. You can see the small dings that I left in the bowl sides rather than change the look. I polished the silver disk with a silver polishing cloth. The next series of photos shows the bowl at this point in the process.
I set the bowl aside and worked on the stem. The old hard rubber that was used on this stem was good quality. There was very little oxidation if any on it. The main issue was the pitting that covered the surface of the stem. I sanded it with 220 grit sandpaper to address the pitting and smooth out the surface and then began my normal sequence of micromesh sanding pads. Between each set of three grits (1500-2400, 3200-4000, 6000-12000) I rubbed the stem down with Obsidian Oil. I gave it a final coat of the oil and let it dry before I buffed the pipe.
I buffed the pipe and stem with Blue Diamond and gave it several coats of carnauba wax. I buffed it with a clean buffing pad to raise the shine. I hand buffed it with a microfibre cloth to put the finishing touches on the pipe. The finished pipe is shown in the photos below. Thanks for looking.
rebornpipes 
