Tag Archives: Bowls – refinishing

A Challenging Restoration of Vintage Era First Choquin “A Metz”

8 Replies

Blog by Paresh Deshpande

I had been on a short leave to my home town last month and that is where this happened!!!!! Even though there are still a number of pipes from the two of the three inherited boxes of pipes waiting their turn for restoration, curiosity got the better of me and I could not resist the temptations of opening the third box. What happened thereafter is that I had to unpack all the pipes earmarked to accompany me to my work place for restoration in my free time which in turn invited the wrath of my wife who had helped in packing in the first place, and repack the newly selected pipes from the third box!!!!!! In addition to the regular collection of Barling’s, Charatan’s, Comoy’s and other assorted collection, I came across two pipes which caught my fancy!!!!!The pipe on the left bears a football stamp that reads “CHOQUIN” over “A METZ” and the one on the right side simply reads “GBD”  (there are other stampings on the silver ferrule, details of which will be highlighted when it comes up for restoration). Both these pipes looked vintage and unique enough that I immediately Facetimed with Mr. Steve of rebornpipes. His admission that he is willing for a trade with me for these two pipes was an indication enough for me to know and understand their uniqueness!!! Thus these two pipes moved to the top of my unorganized and chaotic list of restoration.

The pipe first on my work table is the CHOQUIN. It is a huge pipe with a humongous acorn shaped smooth briar bowl with a steeply raking shank, the end of which is adorned by a fixed sterling silver ornamented ferrule. This similarly designed sterling silver also masks the tenon of the horn stem.The shank and the horn stem are connected by a push-fit type bone extension. The huge acorn bowl shows beautiful, large and loosely packed birdseye grain on the right side while mixed grain adorns the left side. The stummel on the front, back and the shank displays densely packed straight grains. The only stamping that is seen on this pipe is the football stamp on the left side of the shank and reads “CHOQUIN” over “A METZ”. For its age, the stamping is crisp and clear.This time around, before commencing the restoration process, I posted the pictures of this pipe on the Tobacco Pipe Restorers group on Facebook as my next project. In addition to input from my mentor, Mr. Steve, I collected a lot of valuable information from all the knowledgeable stalwarts. From all the input that I have gathered, the flat bottom bowl, the stamping, the sterling silver adornments, the bone shank extension and horn stem, I can safely place this piece as being one of the first A Metz pipes from the 1858 era!!!!!

INITIAL VISUAL INSPECTION
Well, even before I could start my initial visual inspection, I faced the first of the many numerous hurdles that I had to overcome during the restoration of this pipe. The shank extension and the stem would not budge even a millimeter to separate from the shank and the bone extension respectively. I remembered Mr. Steve referring to the technique of freezing the stuck parts in the freezer for a couple of hours for easy separation. I followed his advice and had to put the complete pipe in the freezer for a couple of hours as it could not be dismantled. True enough, the horn stem separated from the shank extension with the application of a little force, but the extension would not budge from the shank!!!! So I went back to Mr. Steve to tap in to his wealth of knowledge and experience. He suggested that I should apply the method of “Hot and Cold” shock treatment in which you gently and carefully heat the stuck part using a heat gun and then get it back in to the freezer. This process may need to be repeated a number of times before the parts separate. Well, I did exactly that, albeit heating with a hair dryer as I did not have a heat gun, and after 3/4 attempts, the extension finally separated from the shank!!!!The first thing that I noticed was that the shank extension and the mortise were completely filled with oils, tars and grime. The shank extension was filled to an extent that a pipe cleaner would not pass through!!!! How very much typical of my Old Man!!!!!!! Through all this muck, just a swipe of the bone extension with a cotton swab dipped in isopropyl alcohol revealed no apparent damage to the shank extension. Cleaning this would need to be a very careful, meticulous, time consuming and a tedious process given the delicate structure of such a vintage bone. Likewise, the tenon also was filled with oils and grime. Air flow through the stem was laborious to say the least!!! Both the upper and lower surface of the horn stem shows significant damage. The lower surface is peppered with 3-4 worm holes with one significantly larger than the other. Thankfully, it had not migrated through the upper surface!!!! The tenon is completely and permanently encased in the sterling silver ornament. The condition of the stummel was an equally horrendous story. Firstly, the rim top is heavily covered in overflowing lava. The overflow is so heavy that it has accumulated over the rim surface in blobs of dried tar and tobacco oil which can be seen in the subsequent pictures. This overflow had not restricted itself to accumulation on the rim top, but has spilled on to the stummel surface covering the stummel in sticky grime which has attracted more dirt and dust giving the stummel a dull and lackluster appearance. The overflowing lava has even accumulated in the junction where the shank and bowl are joined.  Some dents and dings are seen on the surface through the overflow and I do not envisage any major issue like the ones I faced while working on an Imperial Yello-Bole Carburetor that I had I restored. However through all this dirt, tar, oil, grime and damage, lovely grains can be seen on the sides and the shank. It will be a challenge to address these issues and make the grains to reveal themselves in all glory. The chamber is no different story!!! There is a thick build up of cake in the chamber. The inner edge of the rim is covered under the thick cake and as such, its condition can be commented upon only after the cake has been scrapped. The outer edge of the rim, however, shows significant damage in the form of dents, dings and deep scratches to the front in 12 o’clock direction. The cause for this damage is….. Oh, forget it, let’s not even go there!!!! The condition of the inner walls of the chamber can be ascertained only after the chamber has been completely reamed devoid of any cake, but I do not foresee any major damages here as the stummel feels solid to the touch and this huge solid piece of briar can sustain some serious damage. You have to feel the stummel in your hand to understand what I am trying to write. It is one heavy and handful of a pipe!!!!The sterling silver ferrule and tenon ornament was black as is typically seen in heavily oxidized silver. However through all this discoloration, delicate, intricate decorative design can be appreciated. This is another pointer towards the vintage of this pipe.THE PROCESS
I started the process of restoration by polishing the sterling silver ornaments at the shank end and tenon with pipe ash as suggested by Mr. Steve. This was followed by reaming the chamber with size two of the PipNet reamer head and progressing through to size four. Yes Sirs, there is no typo error!!! It is indeed PipNet and not a Kleen Reem reamer as you have gotten used to reading in my write ups !!!!!! Mr. Steve has sent me a set along with some beautiful pipes that I had got from him. I followed up the reaming with scrapping the remnants of the cake from the walls, flat bottom of the chamber and the rim top surface with my fabricated knife (Oh, how I long for a Sav Fitsall reaming knife!!! Hope you are reading this Steve Sir). The cake was so hard, that I invariably ended up scratching the flat bottom surface while scraping. Once the cake was reamed back to the bare briar, I used a 150 grit sand paper followed by 220 grit sand paper to remove all the traces of remaining cake and also to smooth the inner walls of the chamber surface. Finally, to remove the carbon dust, I wipe the chamber with a cotton pad wetted with isopropyl 99%. I gently scrapped the rim top surface with a sharp knife. Removing all the cake from the chamber and rim top revealed that firstly, the rim was out of round and secondly was a web of fissures along the internal walls. There was one crack, which showed prominently after a cleanup with Murphy’s oil soap, bothered me and can be seen in the pictures below which has been highlighted by a red circle. I shared these images with Mr. Steve and Mr. Dal Stanton for their opinion as to the extent of damage and further repairs. They too expressed fears that the crack may have migrated through the stummel. Mr. Steve suggested picking the crack on the top of the rim using a toothpick and filling it with CA superglue. I decided that I would address this issue later after further investigations. I cleaned the internals of the shank, shank extension and the stem using hard bristled and regular pipe cleaners, q-tips, shank brushes, all generously dipped in isopropyl alcohol. I had never used such drastic measures like initially cleaning the bone shank extension by carefully inserting a round needle file for creating an opening through which pipe cleaners could pass through for subsequent cleaning. The heap of pipe cleaners and q-tips that are seen in these pictures are just the proverbial tip of the iceberg. I must have gone through an entire packet of 50 of both types of pipe cleaners, in addition to the q-tips and brush cleaning!!!!! To further deep clean and refresh the internals, I used cotton and alcohol soaks. Using a cotton ball to create a wick, I inserted it through the mortise and into the airway. I then stuffed the bowl with tightly packed cotton balls and placed it in bowl filled with rice grains to provide stability. Similarly I made a tight cotton wick and inserted it through the bone shank extension to further remove all the oils, tars and smells. With a large eye dropper, I then filled the bowl and the bone shank extension with isopropyl 99% until it surfaced over the cotton. I refilled the alcohol in a few minutes after it was absorbed into the cotton balls. I put the stummel and the bone shank extension aside for several hours to soak. After some time, the cotton and the wick were soiled. I discarded the expended cotton and wiped the bowl and the bone shank extension with paper towel. To make sure all was clean, I used a cotton bud and pipe cleaner dipped in isopropyl 99% and they came out clean. I cleaned the stummel with undiluted Murphy’s oil soap and Scotch- Brite pad and rinsed the stummel under running tap water. This cleaning helps in bringing to the fore any other damage which could be hidden under all the dirt and grime. Fortunately, there were no major dents, dings or gouges to the stummel. There were a few minor ones which I think would be addressed when I would sand the stummel surface and subsequent micromesh polish. I dried the bowl with a paper towel and soft cotton cloth. Initially I had decided that I would not be topping the rim top and maintain its original profile. However, in order to ascertain if the crack had migrated through the stummel, I decided to top the rim surface. This would also help to address the numerous dents, dings and scratches on the rim’s top surface and also to remove traces of lava overflow. I topped the rim surface on a 220 grit sand paper. Though it is recommended to have a wooden board with the 220 grit sand paper firmly fixed over it, I just keep the sand paper on a flat table top, holding it firmly with my left hand and rotating the stummel rim top over it with my right hand. I have come to realize that this set up gives me lot more freedom of movement, better control and convenience of storage. Fortunately, it was revealed that the supposed crack was superficial and had not migrated through. Staying with the rim, the next issue that I addressed was the inner rim edge. With a folded piece of 180 grit sand paper pinched between my thumb and fore finger, I created a light bevel on the inner edge. This addressed the issue of uneven and out of round inner edge. The damage to the outer edge was addressed to a great extent when I had topped the rim top surface. Whatever little dents and nicks that remained on the outer edge were very minor, though visible, and I decided to let them be.I sand the stummel surface with a 220, 320, 600 and 1000 grit sand paper, in that order, to remove the minor scratches and marks on the rim and stummel surface. I frequently wiped the sanded surface with a moist cloth to remove the briar dust and also to check the progress of my work. Once I was satisfied with the match, I followed it up by micromesh polishing pads, wet sanding with 1500 to 2400 grit pads. Again, I wiped the bowl with a moist cotton cloth after each pad. I used the 3200 to 12000 grit pads to dry sand the stummel to a nice shine. I was disappointed when after all my efforts up to this stage; there were some very minute chips that were visible in pictures. But overall, at this stage of restoration, the entire bowl, rim top surface and shank is looking fresh and clean. Even though some of the dents and chips could not be completely addressed and are visible only on very close visual scrutiny, in my view, they lend this pipe a battle scarred warrior like a character. I rubbed a small quantity of “Before and After Restoration Balm” with my fingers deep in to the stummel surface. What this balm does is it revitalizes the briar wood and breathes a new life in to the briar. It’s amazing to see the transformation as the balm works its magic on the briar wood. I further buff it with a horse hair shoe brush. Turning my attention to the horn stem, I cleaned the stem surface, including the worm holes, with q-tips dipped in isopropyl alcohol to remove all the dirt and dust before the fill. I filled the worm hole on the bottom and top surface with clear CA superglue and set it aside to cure.  Once the superglue had cured, I sanded the fills with a flat head needle file. To further match the fills with the surface of the stem, I sanded it with 220, 320, 600 and 1000 grit sand paper. I wiped the stem with cotton pad dipped in alcohol to remove the resultant dust. I rubbed some extra virgin olive oil in to the stem and set it aside to be absorbed in to stem. A few minutes later, I polished the stem and also the bone shank extension with micromesh pads, wet sanding with 1500 to 2400 grit pads and dry sanding with 3200 to 12000. I rubbed a little extra virgin olive oil in to both after every three pads. The stem is now nice, smooth and shiny while the extension though smooth and shiny, still had the golden brownish hues of the tobacco oils and tars. I was wondering as to next course of action, Mr. David Goostree, an experienced member from The Tobacco Pipe Restorer group on FB, provided valuable information that the bone is similar to a Meer and absorbs oils from the tobacco and colours just like a meerschaum. Another issue taken care of!!! To finish the restoration, I mounted a cotton cloth buffing wheel to the Dremel (actually it is not the brand machine, but a local machine which is similar).  I set the speed at about 40% full power and applied White Diamond compound to the entire pipe.  Afterwards, I wiped/ buffed the pipe with a soft cotton cloth to clear it of any leftover compound dust. I then mounted another cotton cloth wheel to the polishing machine, maintaining 40% speed and applied several coats of carnauba wax.  I finished the restoration by giving the entire pipe a rigorous hand buffing using a microfiber cloth to raise the shine further. In my excitement mixed with apprehension in using the polishing and waxes for the first time, I completely missed out on taking any pictures. The completed pipe looks lovely, fresh and vibrant. Thank you for having the patience to reach this far while reading the write up. Your comments are of utmost importance to me for improving my skills in restoration process as well as writing about it. Cheers!!!!!

PS: – During this journey of restoring this beauty, I had, on occasions felt low and demoralized as issues kept cropping up like the supposed crack to the stummel, the shank extension not supposedly cleaning up as I had incorrectly anticipated and the 2/3 occasions when the my polishing machine slipped on the surface and caused very minor scratches on the stummel. However, my Guru and mentor, Mr. Steve was always around with his words of wisdom and encouragement to egg me on towards completing this project. Thank you once again, Mr. Steve. I would like to thank all the esteemed members of “The Tobacco Pipe Restorer” group on FB for their interest and valuable inputs, which made this project interesting.

Restoring a Brand I had never heard of before – A Peter Piper 525 Billiard

5 Replies

Blog by Steve Laug

Alex dropped by the other night to drop off a pipe off and to pick up one I was working on for him. He also brought this little billiard with him for me to work on. It is stamped Peter Piper over London Made on the left side of the shank and on the right it is stamped Made in England over the shape number 525. It is a brand I had not heard of and it was an interesting little pipe. It is a reddish coloured billiard. There are some scars and nicks on the surface that are part of the pipe’s story. The finish was worn and there were sticky marks on the shank and sides of the bowl that could have come from a sales label. The rim top had marks on it that looked like it had been tapped out on a hard surface and damaged the briar. The stem had a dental bit made for a pipe smoker with dentures. It had a tall lip on the topside of the stem that could be held behind the top denture. On the underside were two grooves cast in the surface that could be held with the bottom teeth. It gives the pipe a unique look. I took some photos of the pipe at this point to show its condition before I started the cleanup. I took some close up photos of the rim top and the stem to give a clearer picture of the condition of the pipe. The photo of the rim top show the nicks and damage clearly as well as damage to the inner and outer edge of the rim. The stem is very oxidized but there are no tooth marks or chatter on the surface.I wanted to try to figure out where the pipe had come from and who had made it. It was a stamping I was not familiar with. The London Made stamp on the left side and the Made in England stamp on the right side seemed to point to an English pipe making company. I have seen some anomalies in the past where pipes stamped this way were actually made in France. I was curious to see what was behind this pipe.

I turned first to Pipedia.org to see if there was any information on the site about the brand. I check under pipes Made in England and found nothing there. I entered the Peter Piper name in the search box on the site and it took me to the list of French Pipe Makers. Sure enough on the list there was the Peter Piper name. I clicked on that name to see what I could find and it gave me the following information.

The Peter Piper trademark was first applied to a pipe in 1925, and granted on June 1, 1926 to Cadogan France Limited, whose offices were in London. Despite this, the pipe was made at the Marechal Ruchon factory in St. Claude, France. And, despite this, as the pipe was often stamped with London nomenclature. An excellent example of how blurred international borders became where Oppenheimer and Cadogan were involved. For more information see GBD. https://pipedia.org/wiki/Peter_Piper

I followed the link to the “for more information see GBD” statement at the end. I quote that below in part.

Other brands of this time were marketed with even larger independence. The Dr. Plumb’s had been developed by the Parisian sales manager J.B. Rubinovich in 1925 when GBD France needed “a cheap line of pipes” especially for the Canadian market. In fact, the new brand was nicknamed for Mr. Rubinovich’s secretary Leslie W. Plumb, whose most important business was “to doctor figure” the ledgers. Dr. Plumb’s made their way not only in Canada. – The Peter Piper, as well as the Dr. Plumb’s produced in Saint-Claude, is another great example that stampings like “London made” or “London England” are not always totally trustworthy also on older pipes! Not only today numberless brands are made in Saint Claude and stamped with whatever the buyer wants to be stamped… https://pipedia.org/wiki/GBD

I turned to the Pipephil website to see if there was any further information on the brand and found the follow confirmatory information:

… the pipes were stamped “London England” in a straight line, even if they were sometimes crafted in France. http://www.pipephil.eu/logos/en/logo-gbd.html

Now I knew what I was dealing with. Interestingly it was a French Made pipe stamped London Made and Made in England. It was made by GBD France for the Canadian Market to be sold alongside of the Dr. Plumb brand. I love the bit of intrigue that is mentioned above – that the Dr. Plumb brand was named after a secretary, Leslie Plumb whose job was to doctor the ledgers. These pipes made their way to Canada as well as other countries. It is also great proof that the stamping may not always tell the full story.

Armed with this information I started the process of restoration. I topped the bowl with 220 grit sandpaper on a board. I worked the top in a circular motion on the sandpaper to remove the damaged surface and the edges of the bowl. I was so engaged in this restoration that I forgot to take a picture of the rim top after topping. I moved quickly into polishing the rim with the micromesh sanding pads. I wet sanded it with 1500-2400 grit pads and dry sanded it with 3200-4000 grit pads. I wiped it down after each sanding pad. Once I had polished it through the 4000 grit pad I stopped and stained the top with a Maple stain pen to match the rest of the finish. The rim top matched well but still needed to be buffed and polished to blend the stain into the finish of the bowl.I polished the exterior of the bowl and rim with micromesh sanding pads – wet sanding it with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. After the polishing I could see the dents and scratches in the bowl sides and bottom. It was time to apply a little steam and see what I could do to raise them. Unlike those who have steam irons that they abscond from their wives to steam their pipes I use a knife and wet cloth. I heat the knife over the flame of a burner on our gas stove until it is hot. I put the wet cloth over the dents and apply the hot knife to the cloth. I repeat the process until the dents have been raised. In this case it worked pretty well. I was able to get the majority of them out of the briar. The photos tell the story. With the externals cleaned I needed to clean the internals. I had forgotten to do the cleaning until now. The pipe looked pretty clean… in fact I kind of wondered if it had been smoked very much. I cleaned the mortise and shank with alcohol, pipe cleaners and cotton swabs. I cleaned the airway in the stem at the same time (you will notice that the stem is quite black at this point. I had already sanded it with 220 grit sandpaper as noted below).I worked Before & After Restoration Balm into the briar with my fingertips to clean, enliven and protect the wood. I let the balm sit for about 20 minutes and buffed it off with a soft cotton cloth. I took photos of the pipe at this point in the process to show what the bowl and rim looked like. I am happy with the stain match on the rim top. I sanded the stem surface with 220 grit sandpaper to remove the oxidation. I worked on the angles of the dental bit and the grooves on the underside of the stem until I had removed oxidation.I polished it with the micromesh sanding pads – wet sanding it with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. I rubbed it down with Obsidian Oil between each pad. I polished it further with Before & After Pipe Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil and set it aside. I polished the bowl and stem with Blue Diamond to polish out the scratches in the briar and rubber. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The original patina on the bowl came alive with the buffing and worked well with the polished black vulcanite stem. The pipe has a rich look. The finished pipe is shown in the photos below. The shape, finish and flow of the pipe and stem work together like other GBD pipes. The dimensions of the pipe are Length: 5 1/2 inches, Height: 1 3/4 inches, Outside diameter of the bowl: 1 1/8 inches, Chamber diameter: 5/8 of an inch. I have one other pipe to finish restoring for this fellow before it will go back to him. I look forward to seeing what he thinks of it.

Converting a Zettervig Freehand into a Churchwarden

Leave a reply

Blog by Steve Laug

Sometime pipes come back to you. I had restored and restemmed this pipe for a fellow here in Vancouver not too long ago and made a freehand stem for it. I had also worked on converting a broken shanked Brigham into a churchwarden. The other night he dropped by and we sat and chatted for a bit. He pulled four pipes out of his bag for me to look at. One was a new find from a junk store. The other three were pipes that I had already done for him. The first two were churchwardens and he decided that they just were not for him. He also took the freehand stem out of the Zettervig and put it in the Brigham and said that he had been smoking it that way and really liked it a lot. We talked about options – restemming all three, using the stem from the Zettervig on the Brigham, restemming the churchwardens with shorter stems or just selling the pipes. The one churchwarden would be just a cleanup. The other was a little more involved. It meant fitting the existing churchwarden stem on the Zettervig pipe and seeing if that would move it. We chose the last option selling the two pipes as churchwardens to someone who really wanted them.

Here are some pictures of the Zettervig as it was when I sent it home with him. I thought they would give us a base for the change. The pictures give a clear picture of the beauty of the pipe. The stamping on the pipe is on the underside of the shank and reads Zettervig over Copenhagen over Handmade. Under that it is stamped with the shape number 351 followed by Denmark. As a reminder I quote from the blog on the Zettervig to summarize the history of the brand for you all. Here is the link to the blog: https://rebornpipes.com/2018/07/28/restoring-and-restemming-a-zettervig-handmade-351-freehand/

In the 1960’s and into the early 1970’s Ole Zettervig had a shop in Copenhagen, Denmark where he was carving high quality pipes equal to Stanwell, Larsen, Anne Julie, Thurmann, Bang and others. These early pipes were marked “Copenhagen” and are very collectible. He sold his shop at some point in the 70’s and moved to Kolding and continued to produce pipes as a hobby, but the quality of briar and workmanship is said to not equal the early production. The later pipes he now marked as Kobenhaven rather than Copenhagen, and these were sold by Ole at flea markets throughout Europe.

http://www.pipephil.eu/logos/en/logo-z.html

I took the churchwarden stem from the Brigham and reworked it for the Zettervig. I needed to trim the tenon down slightly and reshape the shank end of the stem. I worked on it until the fit was perfect in the shank. I rounded the area above the tenon to fit into the angled plateau on the end of the shank. I used 220 grit sandpaper to shape the tenon and stem. Unfortunately I was on a roll and forgot to take pictures of that part of the process.

I lit a votive candle and used it to heat the stem. I inserted a long pipe cleaner in the stem and turned it over and over until the vulcanite was pliable. I checked the pliability repeatedly and when it was finally bendable I bent it over a round jar to give it an even bend that matched the flow of the bowl and shank. I held it in place until the bend was set. The stem was used by the Vancouver fellow so I needed to remove the light tooth chatter on the top and underside near the button and also clean it to remove the light tars. I cleaned the stem with alcohol and long pipe cleaners. Once the cleaners came out clean that part was finished.I polished the vulcanite with micromesh sanding pads – wet sanding with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. I wiped down the stem with Obsidian Oil after each pad to protect and polish it. I gave it a final polish with Before & After Pipe Stem Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil and set it aside to dry. The Zettervig bowl had been smoked more than the churchwarden stem from the Brigham. It was dirt in the shank and airway. It also had a light buildup of carbon in the bowl and it was dirty. The finish was also dull so that would need to be address. I cleaned out the shank and airway with pipe cleaners, cotton swabs and alcohol until they were clean. I cleaned out the carbon on the bowl walls with a Savinelli Fitsall Pipe Knife to smooth out the interior of the bowl. I rubbed down the smooth briar with Before & After Restoration Balm. I worked it into the smooth surface of the briar on the sides and the bottom of the bowl and shank with my fingertips. I worked it into the plateau on the rim top and shank end with my finger tips and worked it in with a horsehair shoe brush. I wanted to make sure that the balm got deep into the briar to do its work. The balm works to clean, enliven and protect the briar. I let it sit for a little while and then buffed with a cotton cloth to raise the shine. The following photos show the bowl at this point in the restoration process. The rim looks much better than when I started but still needs to be polished and buffed to raise a shine on it. I the buffed stem and the bowl with Blue Diamond on the buffing wheel to polish out the remaining small scratches and raise the shine. I carefully avoided the stamping on the underside of the shank. I gave both the bowl and the stem multiple coats of carnauba wax and buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. This turned out to be a beautiful pipe in terms of shape and finish. The combination of the Danish Zettervig bowl and the vulcanite churchwarden stem looks very good. The finished pipe is shown in the photos below. The dimensions are Length: 11 inches, Height: 2 inches, Outside diameter of the bowl: 1 3/8 inches, Chamber diameter: ¾ of an inch. Thanks for walking through the conversion of this bowl to a churchwarden with me.

Restoring a Dunhill Root Briar EK Square Shank Panel Billiard

2 Replies

Blog by Steve Laug

The next pipe on the work table is a Dunhill Panel Billiard. It is a smooth briar pipe that is very dirty. It has four panels around the bowl and the corners are rounded. The shank is square as well and ends with a square tapered stem. The briar is worn and tired with oils in the briar. The rim top had a build of tars and lave that flowed over it from a thick cake in the bowl. The shank is stamped on the left side EK followed by Dunhill over Root Briar. On the right side it is stamped Made in England with an underlined superscript 0 followed by a 4 circled followed by an R. The stem has the standard white spot on the top side. It was oxidized and had some calcification build up on the first inch of the stem that appeared to have come from a rubber pipe Softee bit. The stamping is easily interpreted. The left side EK is the shape stamp for a panel billiard. The ROOT BRIAR stamping is the line of Dunhill pipes. The right side stamp superscript O tells me that the pipe is dated to 1960. The circled 4 is the size of the pipe (group four) and the R is the stamping for a Root Briar. Jeff took photos of the pipe before he started his cleanup work. Jeff took photos of the top, sides and the bottom of the bowl to show the condition of the briar. The topside showed a thick lava build up flowing out of a thick cake in the bowl. It was hard to know if there was damage on the outer or inner edges of the rim. The sides of the bowl show dents and wear but also some stunning birdseye and cross grain. Jeff took photos of the stamping on the pipe shank. It is faint but readable. It is as I wrote about above.Jeff took a photo of the stem to show the fit against the shank and the white spot. He also took photos of the top and underside of the stem showing the tooth chatter and marks as well as the calcification on the surface of the stem.I wanted to certify the date for myself so I had a look at the PipePhil site and looked the dating and stamping information (http://www.pipephil.eu/logos/en/dunhill/cledat-en1a.html). Using the charts there I was able to confirm that pipe was made in 1960.

I also looked on the Pipedia site and read as much information as I could find regarding the Root Briar line (https://pipedia.org/wiki/Dunhill#Root_Briar). Here is what it said: The line was… Introduced in 1931 and highly prized because the grain is more pronounced in this finish. The Root Briar finish required a perfectly clean bowl with excellent graining. Therefore, it is the most expensive of the Dunhill pipes. Corsican briar was most often used for the Root finish, since it was generally more finely grained. This is a rare finish, due to the scarcity of briar suitable to achieve it. These pipes are normally only available at Company stores, or Principle Pipe Dealers…

Jeff reamed the bowl with a PipNet pipe reamer and followed up with a Savinelli Fitsall pipe knife to remove the cake. He scrubbed out the mortise and the airway in the shank and the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the bowl, rim, shank and stem with a tooth brush and Murphy’s Oil Soap to remove the oils, lava and tars on the rim and the grime on the finish of the bowl. He rinsed it under running water. He dried it off with a soft cloth. The rim was thoroughly cleaned and without the grime the finish had some rim darkening that hid the grain. The vulcanite stem would need to be worked on but I really like the profile it cast. I took photos of the pipe to show its condition before I started my work on it.  I took close up photos of the bowl and rim top as well as the stem. You can see the condition of the rim top and bowl in the first photo. Jeff was able to remove all of the tar and oils but you can now see the damage and darkening around the inner edge. The vulcanite stem had tooth chatter and some light tooth marks on the top and underside of the stem both on the surface of the button and just ahead it. There was one deeper tooth mark on the topside near the button.I started my refurbing work by addressing the darkening on the rim top and inner edge. I first sanded the inner edge with a folded piece of 220 grit sandpaper. I then lightly sanded the rim top with a worn piece of 220 grit sandpaper. I find that using a bit more tired piece of sandpaper works wonders on the dark edge without scratching the rim surface like a new piece. I followed that by wet sanding it with 1500-2400 grit micromesh. I sanded the rest of the pipe with the micromesh at the same time. I dry sanded it with 3200-12000 grit sanding pads. I wiped down the bowl after each pad with a damp cloth. The grain on the rim top began to shine through and the finish was in good condition under the darkened grain. I rubbed down the smooth briar with Before & After Restoration Balm. I worked it into the smooth surface of the briar on the rim, sides and the bottom of the bowl with my fingertips. I wanted to make sure that the balm got deep into the briar to do its work. The balm works to clean, enliven and protect the briar. I let it sit for a little while and then buffed with a cotton cloth to raise the shine. The following photos show the bowl at this point in the restoration process. The rim looks much better than when I started but still needs to be polished and buffed to raise a shine on it. I sanded out the tooth chatter and tooth marks on the stem surfaces. I sanded the rest of the stem with the sandpaper to remove the oxidation on the stem surface.I polished the vulcanite stem with micromesh sanding pads – wet sanding with 1500-2400 grit sanding pads and dry sanding it with 3200-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it further with Before & After Pipe Polish – both Fine and Extra Fine polishes and gave it a final coat of Obsidian Oil and set it aside to dry. I the polished stem and the bowl with Blue Diamond to polish out the remaining small scratches and raise the shine. I gave the bowl and the stem multiple coats of carnauba wax then buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. I left the some of the dents in place as I did not want to sand and ruin the patina. I think they are marks of the journey the pipe has taken. This turned out to be a beautiful pipe in terms of shape and finish. This is a nice looking Dunhill Panel Billiard pipe. The finished pipe is shown in the photos below. The dimensions are Length: 5 3/4 inches, Height: 1 3/4 inches, Outside diameter of the bowl: 1 1/4 inches, Chamber diameter: ¾ of an inch. Thanks for walking through the restoration with me as I worked this beautiful Dunhill Root Briar Panel. Thanks for looking.

Reclaiming a Yello-Bole “Imperial Carburator” Vest Pipe

2 Replies

Blog by Paresh Despande

Having worked on the four Free Hand pipes that I had purchased on eBay, it was time again to work on one of my grandfather’s pipe from my inheritance. I chose to work on the second “Imperial Yello-Bole Carburetor” from his collection. The first had a cracked shank and was restored by my Guru and mentor, Mr. Steve of rebornpipes, here is the link for the write up (https://rebornpipes.com/2018/04/15/pareshs-grandfathers-pipe-2-a-yello-bole-carburetor-4522-billiard/).

This particular pipe was in a battered condition with significant damage to the inner and outer edges of the rim, a large number of chips, dents and dings to the bowl and shank, two deep gouges to the bowl and a heavily oxidized stem. I was not very sure if at all I should attempt at its restoration as I knew that to mask the repairs/ fills to the gouges and chips on the bowl and the shank, I would need to stain it with a darker stain followed by a delicate polish to make the grains pop and here I was, with neither materials nor experience to carry out staining and subsequent polishing. However, Mr. Steve encouraged me to go ahead and restore it nevertheless and keep the natural finish of the pipe and the scars of the repairs as a testimony of the pipe’s journey till date!!!! Well, it always pays to follow the advice of your mentor and I embarked upon this journey to give a fresh lease of life to this old and battered war-horse!!!

The pipe is stamped on the left side of the shank as “Imperial” in fancy cursive hand over “YELLO-BOLE” in block letters while the right side of the shank bears the stamp of “MADE IN FRANCE” starting from the shank end towards the bowl and followed by the model(?) number “648” or is it “64 B”? I have this doubt since I could find a match to this shape and size during my research as per the latter stamp, but the stamp appears as former to my eyes!!!! The center bottom of the pipe has a single hole, lined by an aluminum cone, open at both ends, which protrudes into the chamber. This is followed by “carburetor” in fancy cursive small letters. The stem is devoid of any stampings or logo. Before commencing the restoration, I decided to refresh my memory about Yello-Bole pipe brand and in particular, the Carburetor model, by visiting the blog written by Mr. Steve while restoring my first Yello-Bole. The first thing that struck me as odd was the difference in stampings seen on the pipe which is on my work table!!! The pipe currently on my work table is sans the stamp of KBB in clover leaf, U.S. patent number details, Cured with real honey, stem logo of a yellow circular ring and has shape number in three digits as against four on the one restored by Mr. Steve. However, the biggest and most significant difference which has me flummoxed was the stamping “MADE IN FRANCE”!!!!!!! No amount of research and surfing the internet provided me any clue as regards the origin and dating of this piece of briar.

INITIAL VISUAL INSPECTION
The first and foremost significant visual damage is seen to the rim top, inner and outer edges. It appears that the rim has been repeatedly banged against a hard surface to remove residual dottle over a prolonged period of time!!!! The damage to the rim top is in the form of dings and scratches while significant chipping and cinching is seen on the outer edge. The inner edge of the rim is out of round, apparently caused by use of a knife to remove the carbon cake. The overflow of lava from the rim top appears to be removed by scrapping the surface with a knife and in the process causing all the scratches and dings to the surface. There is a thin layer of cake on the bottom half of the chamber and appears to be a victim of over reamed chamber. The carburetor hole at the bottom of the chamber is clogged and will require to be cleaned. The condition of the inner walls of the chamber will be ascertained only after the chamber has been stripped completely of the existing cake layer.The second most significantly damaged part of the pipe is the stummel. It is covered in oils, dirt and grime of all these years of smoking and subsequent uncared for storage. The stummel surface is sticky to the touch, giving the stummel a dull, lifeless and lackluster appearance. It is peppered with a large number of chips, dents and dings. There are two significant gouges on the stummel; one on the left hand side towards the bottom and the second one is one the right hand side about an inch below the rim top. Overall, the stummel has sustained massive damage over the years due to both, rough usage and careless storage. However through all this dirt, tar, oil, grime and damage, lovely densely packed straight grains can be seen on the sides and shank. It will be a challenge to address these issues and make the grains to reveal themselves in all glory. The shank too is peppered with numerous minor dents and chips on the bottom surface as well as on the right side of the shank. The mortise is clogged and the air flow is constricted and the draw is laborious. This will need to be addressed by thorough cleaning of the same. The saddle stem is heavily oxidized with bite marks on both upper and lower surface of the stem. The lip too shows bite marks and will need to be redefined. The aluminum stinger is firmly attached inside the tenon and could not be removed. It is covered in oils, tars and grime from all the years of smoking and it appears that it has hardened, fixing the stinger inside the tenon.THE PROCESS
I started the process of restoration by reaming the chamber with my fabricated knife as the protruding aluminum cone of the carburetor prevented use of the Kleen Reem pipe reamer. Once the cake was reamed back to the bare briar, I used a 150 grit sand paper followed by 220 grit sand paper to remove all the traces of remaining cake and also to smooth the inner walls of the chamber surface. It was a big relief to note that there was no issue of heat fissures or cracks seen on the surface.To address the numerous dents, dings and scratches on the rim’s top surface and also to remove traces of lava overflow, I topped the rim surface on a 220 grit sand paper. Since the damage to the rim top was significant, I had applied more pressure than usual. Though it is recommended to have a wooden board with the 220 grit sand paper firmly fixed over it, I just keep the sand paper on a flat table top, holding it firmly with my left hand and rotating the stummel rim top over it with my right hand. I have come to realize that this set up gives me lot more freedom of movement, better control and convenience of storage.Staying with the rim, the next issue that I addressed was the rim edges, both inner and outer. With a folded piece of 180 grit sand paper pinched between my thumb and fore finger, I created a bevel on the inner edge. This addressed the issue of uneven and out of round inner edge. For addressing the outer edge, I had two options; first was to top the rim surface till the entire damaged outer rim surface was sanded out, maintaining the straight rim edge profile of the stummel. The disadvantage of this would be a significant loss of briar estate!!! The second (and easier too!!!) option was to create a bevel on the outer edge, sacrificing the original profile of the stummel. However, I envisaged that the bevel to the outer edge would add a new depth and dimension to the profile of the pipe while saving loss of briar. That decided, I created a bevel on the outer edge. Both the inner and outer edges now look much better and add a new dimension to the otherwise plain-Jane billiard shape of the bowl. I cleaned the stummel with Murphy’s oil soap and hard bristled toothbrush and rinsed the stummel under running tap water. This cleaning helps in bringing to the fore any other damage which could be hidden under all the dirt and grime. I dried the bowl with a paper towel and soft cotton cloth. With a thin, sharp and pointed knife, I cleaned out all the fills and gouges. I scrubbed the stummel surface clean with isopropyl alcohol to have a clean surface for a fresh fill. I decided to move ahead with only CA superglue for filling the chips and gouges. I spot filled these chips and gouges with superglue and set it aside for curing. Turning my attention to the stem, I flamed the surface with a Bic lighter to raise the tooth chatter and deeper bite marks to the surface as much as is possible. I followed it up with sanding the stem surface with a 220 grit sand paper to match the raised bite marks with the stem surface and also remove the oxidation before the fill. The deeper bite marks were filled with CA superglue and set aside to cure. After the fills on the stummel had completely cured, I sanded these with a flat head needle file to match them with the stummel surface. This was followed by sanding the fills and the stummel surface to achieve a match as well as remove the minor scratches and cinches on the surface. I frequently wiped the sanded surface with a moist cloth to remove the briar dust and also to check the progress of my work. Once I was satisfied with the match, I followed it up by micromesh polishing pads, wet sanding with 1500 to 2400 grit pads. Again, I wiped the bowl with a moist cotton cloth after each pad. I used the 3200 to 12000 grit pads to dry sand the stummel to a nice shine. At this stage of restoration, the entire bowl, rim top surface and shank is now looking fresh and clean with beautiful densely packed straight grains popping out in all their glory!!!! Even though the fills are prominently visible, in my view, they lend a battle scarred warrior like character to the pipe. While I worked the stummel, the fillings in the stem had cured. I sanded the fills with a flat head needle file. To further match the fills with the surface of the stem, I sanded it with 220, 400 and 800 grit sand paper. I wiped the stem with cotton pad dipped in alcohol to remove the resultant dust. I rubbed some extra virgin olive oil in to the stem and set it aside to be absorbed in to stem. I polished the stem with micromesh pads, wet sanding with 1500 to 2400 grit pads and dry sanding with 3200 to 12000. I rub a little extra virgin olive oil in to the stem after every three pads. I finish the polishing of the stem by rubbing a small quantity of Paragon wax and giving it a final polish with a soft cotton cloth. The stem is now nice, smooth and shiny. Now with the external restoration and cleaning of both the stummel and the stem completed, I proceeded to cleaning the internals of the stem and the shank. As I had observed during my initial visual inspection, the stinger was very firmly attached inside the tenon. To clean the stem air way, I had to separate the stinger from the tenon. I was certain that the stinger was a push-fit type and much easy to deal with. I carefully heated the stinger with the flame of a Bic lighter and wrapping a cloth on the stinger, with careful anti-clock wise rotations, dislodged the stinger from the tenon. I cleaned the internals of the shank with cue-tips, regular and bristled pipe cleaners dipped in alcohol. The mortise was cleaned using a shank brush. With a fabricated dental spatula, I scrapped the walls of the mortise and further cleaned with pipe cleaners till they came out white. Similarly, I cleaned the air way in the stem with pipe cleaners and alcohol. I cleaned the stinger of all the accumulated oils and tars with paper towels after soaking the stinger in isopropyl alcohol and reattached it in the tenon. The internals are now clean and the draw is full, easy and open. I was really not surprised at how dirty were the internals of the shank and stem as can be seen from the condition of the pipe cleaners in these pictures. To finish the restoration, I rub a small quantity of “Before and After Restoration Balm” in to briar and let it rest for a few minutes. The balm almost immediately works its magic and the briar now has a nice vibrant appearance. I further buff it with a horse hair shoe brush. Using a cotton cloth and brute muscle power, I gave it a final polish. I re-attach the stem with the stummel. The completed pipe looks lovely, fresh and vibrant; the photographs speak for themselves. Thank you for having the patience to reach this far while reading the write up. Your comments are of utmost importance to me for improving my skills in restoration process as well as writing about it. Cheers!!!!!

Recommissioning a Comoy’s Moorgate 102 of Italy

1 Reply

Blog by Dal Stanton

I saw this attractive Comoy’s Moorgate on the eBay auction block last year and fortunately provided enough of a bid to bring it home to Bulgaria.  What attracted me to this Comoy’s was the interesting finish which is a darkened, orange hue with nice feathered grain.  This Comoy’s Moorgate also got Jim’s attention after he saw it posted on my website in the For ‘Pipe Dreamers’ Only! collection I list online for pipe men and women to commission.  I enjoyed communicating with Jim via email very much.  Jim not only commissioned the Comoy’s, but he also commissioned a very interesting, older Stanwell Henley Special which I acquired along with 2 brother Stanwell Henleys – 3 pipes I’ve been looking forward to restoring and learning more about.  Along with these 2 pipes that Jim commissioned, were his encouraging words of appreciation for the work we’re doing with the Daughters of Bulgaria – women and girls who have been trafficked and sexually exploited.  Jim was glad that the pipes he was commissioning benefited these efforts.  Thanks, Jim!  Here are a few pictures of the pipes – the Comoy’s and the Stanwell Henley Special – Jim’s is the Saddle Stem Billiard in the middle.  When Jim commissioned these pipes, I’m grateful that he also agreed to be patient as the pipes gradually made it to the top of the queue.  I take some additional pictures to take a closer look at the Comoy’s Moorgate on my worktable here in Sofia, Bulgaria, on the 10th floor of a formerly Communist block apartment building. The nomenclature identifies this Comoy’s as a post-Cadogan era pipe which dates it no older than the early 1980’s when the Cadogan merger took place.  On the left side of the shank is ‘COMOY’S’ [over] ‘MOORGATE’.  The right side of the shank is stamped with the shape number, ‘102’.   The upper side of the stem has the well-known ‘C’ Comoy’s stamp and the underside is stamped, ‘ITALY’. All the stampings point to a post-merger Comoy’s pipe.  The COM being Italy and not ‘Made in London England’ confirms this as Cadogan farmed out the manufacturing.  Interesting also is the shape number, ‘102’.  Pipedia provides a Comoy’s Shape Number Chart that identifies the 102 as being an army mounted, large, straight Pot which does not correspond to the Half Bent Billiard on my table.  The chart most likely pointing to earlier shape numbers.Pipephil.eu provides a Comoy’s Moorgate that matches up with what I’m seeing before me – nomenclature and stampings.  It references a Comoy’s second brand with the name ‘Moorgate’.  I look up the reference and it is a different line altogether – nomenclature and stem stamps and COM as ‘Made in England’.Looking at the condition of the Comoy’s Moorgate on my worktable, it is generally in good condition.  I take a few more pictures to look at some trouble areas.  The chamber has moderate cake build up and some significant lava flow caked on the rim.  The bowl surface has some dents which I’ll try to lift with the hot iron method to preserve the finish.  The stem has moderate oxidation and tooth chatter – no huge problems detected there. To begin, I run a pipe cleaner wetted with alcohol through the draft way and then put the stem in a bath of Before & After Deoxidizer along with several other pipes in the queue.  After several hours soaking, I fish out the Comoy’s stem and allow the Deoxidizer fluid to drain off.  I then take a cotton cloth wetted with alcohol and wipe off the raised oxidation. I continue wiping off oxidation and conditioning the stem by wetting the cotton pad with light paraffin oil.  The Deoxidizer seems to have done a good job. Next, I address the chamber cleaning by reaming it with the Pipnet Reaming Kit. To help with the cleanup, I put down some paper towel to catch the dislodged carbon.  Beginning with the smallest of four blade heads, I ream the chamber. I only use 2 of the 4 blades available.  I follow this by using the Savinelli Fitsall Pipe Tool to fine tune the reaming.  I also use the Fitsall Tool to scrape gently an internal rim bevel that emerges from underneath the carbon cake.  I also use my thumbnail to scratch the carbon off the rim.  Following this, I wrap a piece of 240 grit paper around a Sharpie Pen and sand the chamber.  Finally, to remove the carbon dust, I wipe the chamber with a cotton pad wetted with isopropyl 95%.  With the chamber cleaned, I inspect the chamber walls and I find no issues with heat fissures or cracking. Turning now to the external briar surface, I use undiluted Murphy’s Soap on a cotton pad and clean.  I take my time on the rim to remove the lava.  After cleaning the surface, I use cool tap water to rinse the bowl.Turning now to the internals of the bowl, I use cotton buds and pipe cleaners with alcohol to clean. I also use a dental spatula to scrape the mortise walls more quickly removing the built-up tars and oils.  In time the buds and pipe cleaners start coming out cleaner.  Good for now.  I move on!To achieve a deeper cleaning and refreshing of the internals, I use a kosher salt and alcohol soak.  Using a cotton ball to create a wick, I stretch and twist it and then insert it through the mortise and into the airway.  I then fill the bowl with kosher salt and place it in an egg carton to provide stability.  With a large eye dropper, I then fill the bowl with isopropyl 95% until it surfaces over the salt.  I top the alcohol in a few minutes after it’s absorbed into the salt.  I put the stummel aside for several hours to soak.  After some time, the salt and the wick were soiled.  I tossed the expended salt, wipe the bowl with paper towel, and blow through the mortise to remove salt crystals.  To make sure all was clean, I use a cotton bud and pipe cleaner dipped in isopropyl 95% and they are clean.Putting the cleaned bowl aside, I take the flat needle file and work on the button.  I file the button lips, upper and lower to redefine them.  To erase the scratches of the file, I follow by sanding the bit area, upper and lower with 240 grade sanding paper.  I also sand the entire stem to remove further residual oxidation.  I’m careful to avoid the stem stampings while sanding.  To remove the scratches left by the 240 grade paper, I wet sand using 600 grade paper followed by applying 0000 steel wool buffing to the entire stem.In order to further enrich the vulcanite, I use Before & After Fine and Extra Fine Polish in that order.  I put some Fine polish on my fingers and work the polish in.  After some minutes, I wipe it off.  I follow with the same process with the Extra Fine Polish, giving it some minutes and wiping it off and buffing up the stem.  The stem is cleaning up very nicely.Turning again to the stummel, there are 2 significant dents that I want to see if I can minimize using the heating method with an iron.  I take pictures of the two places I have in mind.  I heat the iron and dampen a cotton handkerchief with water.  I place the cloth over the dent and press the hot iron against the cloth over the dent in the briar.  The heat and moisture are supposed to expand the dent and in this case it does. Interestingly, taking a picture of the two dents afterwards, what emerged is a roughness caused by the heat. Hmmm, not sure why that happened.  The pictures show what I see before and after heating. To remove the roughness caused by the heating and to remove the normal wear nicks, I wet sand the stummel using micromesh pads 1500 to 2400.  I then dry sand with pads 3200 to 4000 and 6000 to 12000.  The grain on this Comoy’s Moorgate is unique as it emerges through the micromesh process.  It looks great! To enrich the natural grain of the bowl, I apply Before & After Restoration Balm.  I apply some Balm on my fingers and work it into the briar surface.  The Balm starts with a thinner oil-like viscosity then gradually thickens to a waxy consistency.  After I apply the Balm thoroughly, I let the bowl stand for several minutes while the Balm absorbs.  I then wipe off the Balm using a microfiber cloth and gradually, as the Balm is removed, I transition to buffing with the cloth. I take a picture while the Balm is doing its thing and after. I’m liking it a lot!Returning to the stem, I now continue with the micromesh sanding phase.  I begin by wet sanding using pads 1500 to 2400, then dry sanding using pads 3200 to 4000 and 6000 to 12000.  Between each set of 3 micromesh pads, I apply Obsidian Oil to continue revitalizing the vulcanite.  The rubber has that glossy pop!  I put the stem aside to dry. Next, I want to refresh the stem stamping, ‘ITALY’.  To do this I place a drop of white acrylic paint over the lettering.  I then use a cotton pad to blotter the excess paint, thinning it so that it dries rapidly. With the flat edge of a toothpick, I then gently scrape the excess paint off the stem.  The pictures show the progress. I now reunite the stem and the bowl and mount a cotton cloth buffing wheel to the Dremel.  I set the speed at about 40% full power and apply Blue Diamond compound to the entire pipe.  Afterwards, I wipe/buff the pipe with a felt cloth to clear it of leftover compound dust.  While I was buffing with the felt cloth, I note that the stem fitting is a little loose for my liking.  This sometimes happens after cleaning the pipe well and scraping the mortise.  To remedy this, I fit a drill bit just larger than the airway diameter and heat the tenon with a Bic lighter.  As the vulcanite tenon heats, it becomes supple allowing me to insert the bit into the airway and it expands the tenon slightly.  I test the fit and it works perfectly, and I am satisfied.  After rejoining stem and stummel, I then mount another cotton cloth wheel to the Dremel, maintaining 40% speed and apply several coats of carnauba wax.  I finish the restoration by giving the entire pipe a rigorous hand buffing using a microfiber cloth to raise the shine further.I’m pleased with the results of this Comoy’s Moorgate.  The briar is spectacular with its diversion of colors and swirls of grain.  Patches of orange settle in the grain knots and from there the colors are an eye catching kaleidoscopes. It is a unique piece of briar and the half-bent Billiard nicely rests in the palm.  Jim commissioned this Comoy’s from the For ‘Pipe Dreamers’ Only! collection and he will have the first opportunity to acquire it from The Pipe Steward Store.  This pipe benefits the Daughters of Bulgaria – women and girls who have been trafficked and sexually exploited.  Thanks for joining me!

A Tiny 2 Star BBB 8881 Apple/Globe Provided An Interesting Challenge

3 Replies

Blog by Steve Laug

When I spoke with a fellow here in Vancouver who had a pipe that he wanted me to fix it sounded like a simple repair. He said that it had a very loosely fitting stem. He asked if he could drop by to show it to me and see if I could fix it. From past experience I have learned to never jump to conclusions about what sounded like an easy repair. When he arrived he showed me his GBD Faux Spigot. It turned out to need far more work than just tightening a loose stem. I wrote about that restoration in a previous blog (https://rebornpipes.com/2018/11/03/redoing-a-poorly-restored-ebay-gbd-super-q-9436/). We talked about his GBD for a bit and he made the decision to have me do a restoration on it. Then he reached into his pocket and pulled out a small plastic bag with a little BBB 2 Star apple of globe shaped pipe. It was stamped BBB in a diamond on the left side of the shank with two ** – one on either side of the diamond. ON the right side it was stamped Made in England over the shape number 8881. He said that he had found it at his parents’ house and really no one there knew where it came from.

Here is what I saw. Starting with externals. The pipe was small – kind of a pocket pipe. The grain on the bowl was quite stunning – a mix of flame and birdseye all around the bowl and shank. The rim top was coated with a thick lava coat and it went into the bowl. The inner edge of the bowl was in rough shape having been hacked clean with a knife. There was a crack on the right side of the shank curving to the underside. It looked to me it was made by the poorly made stem being shoved into the shank. The stem was larger in diameter than the shank and had been rounded over with a file. There were deep bite marks on the surface ahead of the button on both sides. Moving to the internals. The end of the tenon was carved with a knife to make it fit the mortise in the small shank. The inside of the shank was dirty but less so than I expected. The inside of the bowl had a light cake but most of that was gone from the knife job that had left a wounded inner edge on the rim. Looking at the pipe I explained what I would have to do to bring it back to life and restore it to use. It would need, cleaning, reshaping on the rim, a band on the cracked shank that would leave the stamping readable, and a reworking of the stem to make it a fitting addition to the lovely briar of the bowl. The pipe was going to be a fun challenge. I took these photos to give you an idea of what I saw. The previous pipeman who had fit a new stem to an old favourite pipe had done a functional job but it looked rough. It was pretty clean on the inside so it was cared for. It must have been a great smoking pipe for him to fit a new stem and not give up on it when the previous one broke or was lost. It was smokable. I took a close up photo of the rim top to show the condition. It is hard to see but the rim top was not smooth. The lava build up was pretty thick and there were some deep nicks and chips in the flat top. The close up photos of the stem reveal the scratches in the vulcanite, the tooth marks and the worn and ill-defined button.  The oversized diameter – prettified to look nice is clear in the photos. I took photos from the side of the pipe to show the stamping on the shank and the prettified stem. In the second photo you can see the crack in the shank curving downward to the underside.I decided to address the cracked shank first. With the crack as large as it was and movable I did not want to further damage it when I worked on the stem and fit of the tenon. I knew that it needed to be banded but that would cover the stamping on the shank so adjustments would have to be made. I used a Dremel and sanding drum to reduce the size of the shank to fit the band I had chosen. I did not take of too much briar and I only damaged the M in Made In England as part of it would end up being covered by the band.I repaired the crack in the shank with super glue and pressure fit the band onto the shank to the point of the end of the sanded portion. I used a Dremel and sanding drum to cut back the band to the width that I wanted. Compare the photos above with the one below to see how much I took off of the band. I topped the band on a topping board with 220 grit sandpaper and smooth out the sharp edge with 1500 grit micromesh. I decided that since I was already working with the Dremel and sanding drum that I would take down the excess diameter on the stem as well. I reduced it to sit snugly against the band giving the pipe a classy look.I cleaned up around the inside edge of the band and edge on the shank with a folded piece of 2220 grit sandpaper to smooth things out and make the fit and transition smooth. I lightly sanded the blade portion of the stem and the area of the tooth marks next to the button with 220 grit sandpaper to remove the oxidation and clean it up. I fit the stem in the shank and took a photo of the pipe at this point in the process. It was beginning to look like a classic BBB to my eye. With the stem roughly fit to the shank it was time to address the bowl top. I topped it on a topping board with 220 grit sandpaper. At that point I called it a night. I had to catch a train down to the southern part of Washington from Vancouver in the morning so I thought I would bag up a couple of pipes I was working on and take them with me.I caught the train south from Vancouver, BC at 6:30am. Once we had our seats we were in for an 8 hour train ride. I figure it would be a good opportunity to work on these two pipes. You can see my work table in the photo below. I used the fold down table. It had a lip around it so I spread out a couple of napkins for the dust and went to work on the pipes.I started working on the BBB by addressing the damage to the inner edge of the rim. It was significant with cuts and burns. My topping worked had helped with the top damage and smoothed that out but I need to work on the rim edge. I used a folded piece of 220 grit sandpaper to smooth out the sharp edges and bring the bowl back to round. Once I had the rim as round as I could get it and smoothed out the damaged edge I polished it with micromesh sanding pads. I polished the bowl and the rim at the same time. I wet sanded with 1500-2400 grit micromesh sanding pads and dry sanded with 3200-12000 grit pads. I wiped the bowl down with a damp napkin after each pad. I touched up the stain around the front of the band and stained the rim top and inner edge with Maple and Cherry stain pens. Together the two stains matched the rest of the bowl.I rubbed down the briar with Before & After Restoration Balm. I worked it into the smooth surface of the briar with my fingertips to clean, enliven and protect it. I let the balm sit for a little wall and then buffed with a cotton cloth to raise the shine. The following photos show the bowl at this point in the restoration process. The rim matches well but still needs to be polished and buffed to raise a shine on it. I used a folded piece of 220 grit sandpaper to reshape the button and also to smooth out the marks left by the Dremel when reducing the diameter of the stem. I sanded the tooth marks near the button on each side of the stem to smooth them out.I polished the stem, tenon and metal work with micromesh sanding pads – wet sanding with 1500-2400 and dry sanding with 3200-12000 grit pads. I wiped the stem down with Obsidian Oil after each sanding pad. I was able to remove the damage on the tenon and polish out the dripping varnish on the metal adornment. The stem looked much better at this point in the process. I the polished stem and bowl with Blue Diamond to polish out the remaining small scratches and raise the shine. I gave the bowl and the stem several coats of carnauba wax and buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. This turned out to be a beautiful little pocket pipe in terms of shape and finish. The new nickel band adds a touch of class in my opinion and gives the pipe a new elegance. I look forward to hearing what the fellow who dropped it off for repair thinks of it once he has it in hand and is smoking it. The finished pipe is shown in the photos below. The dimensions are Length: 4 inches, Height: 1 3/8 inches, Outside diameter of the bowl: 1 inch, Chamber diameter: 3/4 of an inch. Thanks for walking through the restoration with me.

Refreshing a Jarl 1545 Made in Denmark Dublin

5 Replies

Blog by Dal Stanton

I acquired two Jarl of Denmark pipes in the Lot of 66 pipes I landed on the eBay auction block a couple of years ago.  When I first saw them, I liked the style of the blending of the blasting or is it rustification? – and the twin smooth panels on the sides of the bowl.  Both are marked on the underside of the smoothed shank portion.  The Billiard is marked ‘Jarl Chieftain’ 1511 with a ‘J’ stem mark and the Dublin is marked simply, ‘Jarl’ 1545.  Under each Jarl designation is the COM, Made in Denmark.  I will be adding nothing new to the scant information available on the internet for the Jarl name.  Pipedia’s only entry is brief:

In December of 2010 Ellen Jarl wrote that Jarl pipes were made by her grandfather, Niels Mogens Jørgensen in a little factory in the town of Bramdrupdam, just outside Kolding, Denmark. We have no reason to doubt that Niels Mogens Jørgensen is the maker of these pipes.

Cyrus, a friend who formerly was a Peace Corp worker here in Bulgaria, saw the Jarl Dublin in the For ‘Pipe Dreamers’ Only! section on ThePipeSteward website and commissioned him.  After doing research on these Jarls, I’m wondering if I might not regret pulling the Jarl Chieftain out of the Pipe Dreamers offerings to keep for myself!!  Here are the two Jarls in the Pipe Steward collection and more pictures showing the Jarl Dublin as Cyrus saw in Pipe Dreamers.I read through several blog threads containing anecdotal information about Jarl pipes and discovered a universal appreciation and love for this Danish line.  More than once, regret was expressed in not buying the Jarl one saw several years ago.  I enjoyed by far, a Jarl thread on Pipesmagazine.com by donjgiles, who had taken to collecting Jarls and had several pictures showing the collection.  The blending of rough/smooth briar seems to be a trademark of the Jarl motif.  If indeed, Niels Mogens Jorgensen made these pipes in a smaller operation, and he no longer does, the Jarl name will only become more difficult to find as it becomes more collectable.  Following are a few samples of the collection of Jarl pipes from Pipesmagazine.com: It is an interesting question.  Is the surface blasted or a result of rustification?  When talking to Steve Laug of rebornpipes, Steve described how it may be both.  ‘Blastification’ is a technique that may have been used that combined both blasting and rustification.  The Jarl surfaces shows both characteristics – but done so well that it looks natural.  Steve also mentioned that with Jarl pipes a special process was developed called ‘Oil Hardened’ that removed the sap and impurities from the briar that made the briar lighter and more resilient.  Some Jarl pipes are marked ‘Oil Hardened’ but Steve thought that all Jarl pipes were treated in this way.

Looking at the Jarl Dublin now on my table, I don’t see any major issues and I’m hoping this Jarl cleans up quickly.  The chamber has cake that needs clearing and the ‘blastified’ stummel needs a good cleaning.  The smooth panels on both sides of the stummel have minor nicks and the entire stummel seems dull and dark.  The stem shows some tooth chatter on the upper and lower bit.  I begin the clean up by running a pipe cleaner wetted with isopropyl 95% through the stem and the adding the stem to a soak of Before & After Deoxidizer with other pipes in the queue.  After several hours, I fish out the stem and let the Deoxidizer drain off the stem.  I run another pipe cleaner through the stem to clear the Deoxidizer.  I then wipe off the raised oxidation using a cotton pad wetted with alcohol.  I follow by additionally wiping with a cotton pad wetted with light paraffin oil.  The Deoxidizer did a good job.  The pictures show the progress. Putting the stem aside, I next address the carbon cake in the chamber by reaming with the Pipnet Reaming kit.  To save on cleanup, I put paper towel on the work table. I use two of the four blade heads available starting with the smaller and working my way to the next larger.  I follow the reaming blades by scraping the chamber wall with the Savinelli Fitsall Pipe tool.  Finally, I wrap 240 grade paper around a Sharpie Pen and sand the chamber and finish the chamber cleaning by wiping it with a cotton pad wetted with alcohol.  After an inspection of the chamber, the wall shows no problems with heat fissures or cracks.  The pictures show the progress. To clean the external briar surface, I use undiluted Murphy’s Soap and cotton pads and a bristled tooth brush.  I scrub the blasted rustification to clean all the nooks and crannies.  Using a brass wire brush, I work on the rim as well, which is a little darkened from oils.Turning to the internals, I use pipe cleaners and cotton buds wetted with isopropyl 95%.  I also use a long shank brush to work on the mortise and airway as well.  Using a dental spatula, I also excavate tars and oils by scraping the mortise.  The cleaning is looking good.  Later I’ll continue the internal cleaning process with a kosher salt and alcohol soak.The stem has light chatter on the upper- and lower-bit area and some small bite compressions.  First, to lessen the chatter and dents, I use heat to expand the vulcanite.  Using a Bic lighter, I paint the vulcanite surfaces and the heating causes expansion, encouraging the rubber to find its original state.  The pictures are upper, before and after heating and lower, before and after, to show the changes through this method.  I follow by sanding with 240 grade paper and refreshing the button using a flat needle file.  The pictures show the process.

Upper, before and after and 240 grade paper: Lower, before and after, and 240 grade: I continue working on the stem by wet sanding with 600 grade paper followed by using 0000 grade steel wool over the entire stem. I put the stem aside and look at the stummel.  It’s difficult for me to tell if the rustified/blasted part of the stummel is simply in need of conditioning and wax or if it needs a fresh finish.  To sneak a preview of what the finish might look like pretty much as is, I wipe some light paraffin oil over the stummel.  I take a before (first 2 pics) and after (second 2 pics) the oil picture for comparison.  The rim briar (not showing in the pictures) is on the thin side, but overall the ‘blastified’ briar looks good.  The smooth briar panels on both sides have scratches from normal usage.  After looking at the ‘sneak peek’ using the light paraffin oil, the plan is formulated.  I’ll touch up the rim with a dye stick to darken the thin, bald patches.  I’ll sand the smooth panels to clear the scratching and to create more of a comparative ‘pop’ between the smooth and rough briar. Using a Mahogany dye stick, I color the rim and edge.  I then feather wipe it with a cotton pad wetted slightly with alcohol to blend the dye giving it more texture. Now, using micromesh pads 1500 to 2400, I wet sand both side panels.  I then follow by dry sanding the side panel with the remainder of the micromesh pads 3200 to 12000.  I also lightly sand the underside nomenclature panel and the ring at the end of the shank – only with the latter pads.  I do not want to cause further deterioration of the nomenclature.  I love the smooth briar panel pop!  The first two pictures show the starting point and then following the micromesh application. At this point I put the brakes on a bit with the stummel.  I continue the internal cleaning using kosher salt and alcohol.  I first create a wick by stretching and twisting a cotton ball and inserting it in the mortise and airway.  The wick acts to draw the tars and oils out of the mortise as the alcohol soaks.  I then fill the bowl with kosher salt and place it in an egg carton to keep it stable during the soak.  I then fill the chamber with isopropyl 95% until it surfaces over the salt.  After a few minutes I top off the alcohol again.  I put the stummel aside and let it soak for several hours. With the stummel on the sidelines for the time, I turn again to the stem.  Using micromesh pads 1500 to 2400, I wet sand the stem.  Falling this, I dry sand using pads 3200 to 4000 and 6000 to 12000.  Between each set, I apply a coat of Obsidian Oil to enrich and revitalize the vulcanite stem.  It’s looking great. The kosher salt/alcohol soak is next to address.  The salt has darkened, and the wick is very soiled demonstrating that the cleaning process had happened.  I clear the expended salt in the waste and wipe the chamber with paper towel to remove the left-over salt.  I also use a bristled shank brush in the chamber and a narrower one through the mortise to remove old salt.  I blow through the mortise as well.  To make sure all is clean, I run a pipe cleaner through the airway and a cotton bud in the mortise – both dipped in isopropyl 95%.  Each came out clean.  I like this final internal cleaning process to fully freshen the internals for the new steward. With the stummel cleaned and a stem waiting in the wings, I continue working on the external surface of the stummel.  I thought about how to approach the stummel earlier and decided that the blastification of the Jarl was in good shape but needed some conditioning.  After sanding the smooth briar panels, I treat the entire surface by applying Before & After Restoration Balm. I’m have been looking forward to using it and seeing how it turns out.  I take a picture of the stummel before starting for comparison.  I place some of the Balm on my fingers and work the Balm into the briar surface.  I’m careful to work the Balm well into the rough landscape of the blasting/rustification.  After working it in well, I wait for a few minutes for the Balm to absorb and do its thing.  I take another picture at this stage.  Then, taking a microfiber cloth, I wipe off the excess Balm and eventually begin to buff up the surface with the cloth.  I like what I see!  The Balm provides a deep, rich rendition of the natural color already there.  The pictures show the progress. Next, I reunite the stem with the stummel and mount a cotton cloth buffing wheel to the Dremel and set the speed at 40% full power. I then apply Blue Diamond compound to the entire pipe.  I work the cotton cloth wheel well into the blasted/rustified surface as I rotate the wheel methodically over the surface. I make sure I’m applying the compound into all the nooks and crannies.  After finishing with the compound, I rigorously buff the surface with a felt cloth primarily to remove the compound dust from the stummel in preparation for the waxing phase. After mounting the Dremel with another cotton cloth wheel, increasing the speed slightly to about 45 to 50% of full power, I apply carnauba wax to both the stem and the stummel.  I apply a few coats of carnauba then I follow by going over the entire surface again with a clean cotton cloth wheel.  I do this to be sure that the wax is spreading uniformly through the rustification and not gunked up in the nooks and crannies.  Finally, I finish the restoration by giving the Jarl Dublin a rigorous hand buffing with a microfiber cloth.  This not only raises the shine beautifully but gives one more pass over the surface to make sure of an even wax coverage.

This pipe is beautiful and gives credence to the Jarl lovers I read in the threads.  The tapestry of briar texture and presentation draws the gaze to look more closely the grain of smooth briar contrasted with the brown, reddish blastification.  The classic Dublin shape simply adds attitude to the overall look.  I like this pipe a lot and I’m sure Cyrus will too.  Since he first commissioned the Danish Jarl 1545 Dublin from the For ‘Pipe Dreamers’ Only! collection, he will have the first opportunity to acquire the Jarl in The Pipe Steward Store.  The best part is that this pipe also benefits the Daughters of Bulgaria, our effort here in Bulgaria to help women and girls who have been trafficked and sexually exploited.  Thanks for joining me!

Redoing a Poorly Restored EBay GBD Super ‘Q’ 9436

4 Replies

Blog by Steve Laug

Probably one of the most irritating parts of the art of pipe restoration is when a pipe comes to me from an EBay seller who sold it as fully restored and ready to smoke and it was not. The story of this pipe started with that description. On the weekend I received a call from a fellow here in Vancouver who had a pipe that had a very loosely fitting stem. He asked if he could drop by to show it to me and see if I could fix it. From past experience I never jump to conclusions about what sounded like an easy repair. When he arrived he showed me this GBD Faux Spigot. It had a nickel ferrule and a nickel adornment just above the Delrin tenon. The tenon was drilled out for a 6mm filter. The stamping on the bowl reads on the left side GBD in an oval over Super ‘Q’. On the right side it had a Made in London over England COM stamp with the shape number 9436 next to that. On the underside of the shank it has an M stamped next to the ferrule. I asked him where he had picked up the pipe and he said that he had picked it up on EBay. Knowing that, I began to look more carefully at the pipe.

Here is what I saw. Starting with externals. The rim and exterior of the pipe had been coated with a shiny varnish coat with some significant grime on the rim top under the varnish. The nickel had also been coated with the varnish and had run on the stem adornment. The stem also had some deep bite marks on the surface ahead of a very worn and ill-defined button on both sides. Moving to the internals. The end of the tenon had a lot of tarry buildup in it from smoking the filter pipe without a filter. Not much effort seems to have been made to remove it. The inside of the shank was also covered with a tobacco juice lacquer that was also gumming up the airway. When I blew through it, the draught was constricted. The inside of the bowl was another story. The bowl had been lightly reamed leaving behind a fairly thick cake that was checked and cracked giving the bowl interior a very fractured look. The bottom half of the bowl had not seen the blade of the reamer and was dirty. There was debris in the airway as it entered the bowl. I have to say that the pipe was a mess and the work that had been done would make my job harder.

To say that it was restored and ready to smoke was an outright lie. If it had been cleaned and the only issue was the cake I would have been good with that. If the rim top had been cleaned before the shiny coat I would have been good with that. But to cover it up and make it shiny to hide a poor job is deceptive at worst and shoddy craftsmanship at best. I pointed out the issues with the pipe to the fellow who had stopped by and suggested that he have me clean it up for him the way I think that it should have been cleaned. He was game so the pipe stayed with me when he left. I took some photos of the pipe before I started my work to show the general condition. I took a close up photo of the rim top to show the condition. It is hard to see but the rim top is not smooth. There are chunks of grime/lava under the shiny top coat. The close up photos of the stem reveal the scratches in the vulcanite, the tooth marks and the worn and ill-defined button.  There is also some sagging shiny coat on the nickel stem adornment that is visible.I cleaned the internals of the shank and stem with pipe cleaners, cotton swabs and alcohol. The debris that came out was astonishing for a “restored” pipe. I scraped the walls of the mortise with a sharp pen knife to remove the lacquer build up there. When I finished the pipe smelled cleaner.I reamed the bowl back to bare briar with a PipNet pipe reamer. I cleaned up the debris with a Savinelli Fitsall Pipe Knife and sanded the walls with a piece of dowel wrapped in 220 grit sandpaper. I wanted to see behind all the cake what the walls looked like. Sadly they were as I expected – very checked with spidery cracks. I took a few photos of the damage to the inside of the bowl to give an idea of the extent of the checking and fissures on interior walls. This is typically caused by smoking too hot.To protect the bowl wall I mixed up a batch of charcoal powder and sour cream to make a paste. I pressed the mixture into the crevices and fissures on the walls of the bowl and painted a top coat of the mixture with a folded pipe cleaner. I set the bowl aside to cure and turned my attention to the damaged stem.I used a needle file to redefine the button on both sides of the stem and sanded the tooth marks out the surface of the stem with 220 grit sandpaper. I filled in the remaining deeper tooth mark with super glue and when it cured sanded it smooth to match the surface of the stem.I polished the stem, tenon and metal work with micromesh sanding pads – wet sanding with 1500-2400 and dry sanding with 3200-12000 grit pads. I wiped the stem down with Obsidian Oil after each sanding pad. I was able to remove the damage on the tenon and polish out the dripping varnish on the metal adornment. The stem looked much better at this point in the process. Once the bowl coating cured I worked on the rim top with micromesh sanding pads – 3200-12000 to remove the tarry deposits around the surface. I scrubbed the bowl down with Before & After Restoration Balm and after it sat for a short time I buffed it off with a cotton cloth. Here is what it looked like at that point. I the polished stem and bowl with Blue Diamond to polish out the remaining small scratches and raise the shine. I gave the bowl and the stem several coats of carnauba wax and buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. This turned out to be a beautiful pipe in terms of shape and finish. I am looking forward to hearing what the fellow who dropped it off for repair thinks of it once he has it in hand and is smoking it. The finished pipe is shown in the photos below. The dimensions are Length: 5 3/4 inches, Height: 2 inches, Outside diameter of the bowl: 1 1/2 inches, Chamber diameter: 7/8 of an inch. Thanks for walking through the restoration with me. Thanks for tolerating my rant at the beginning about redoing EBay “restored” pipes. Also if any of you have ever heard of the GDB Super ‘Q’ line let me know. Thanks for looking and thanks for any help you might give.

About a Super Grain Kaywoodie Medium Dublin #08 Almost as Old as My Dad

Leave a reply

Blog by Robert M. Boughton

Copyright © Reborn Pipes and the Author except as cited
https://www.roadrunnerpipes2k.com/
https://www.facebook.com/roadrunnerpipes/

FOR MY DAD
E. MICHEAL BOUGHTON
2/23/1933-10-16-2018

my father moved through dooms of love
through sames of am through haves of give,
singing each morning out of each night
my father moved through depths of height 
— e.e. cummings, “my father moved through dooms of love,” from 50 Poems, 1940

INTRODUCTION
I was going to start with the dedication and for once leave out the opening quote.  Then the last stanza of Dylan Thomas’ “Do not go gentle into that good night” came to me.  I even had it typed in a few seconds.  Upon reflection, however, the idea of Thomas’ great, impassioned cry to his father, there on the sad height, seemed a little too close to my own feelings and therefore by definition selfish.  Any notion of beginning with words from Thomas, albeit brilliant and stirring, was belayed by the sudden and vivid recollection of my dad and me having a rare pleasant conversation.  The Cold War was raging hotter than ever at the time, and that was more or less what our normal interactions resembled

Out of nowhere, it seemed, the pleasant remembrance filled my mind, from lifetimes ago when I was 16 or so and reading books almost every spare moment I had.  I used books back then the way I later turned to alcohol more than I already had, to escape reality, except the books were good for me.  I could see the two of us, my dad and me, standing in the entryway to the house, golden-orange beams of late afternoon sunlight filtering through the windows.  My knapsack was stuffed, as tight as an overfilled laundry machine, with schoolbooks and other implements of learning, while cradled in my arms were about five diverse and serious reads I had bought for my own pleasure.  As my tastes were then and remain now rather eclectic, but with several main themes at the time, there was probably one each classic, sci-fi, fantasy, quirky crime fiction like Elmore Leonard’s Mr. Majestyk or anything having to do with spies by The Master, John le Carré, and of course someone’s, anyone’s, biography.

My dad made a point of coming out of his room and stopping me to talk, the subject of which I’m sure now didn’t make any difference to him.  He saw the load of new books I was holding and asked what I was reading those days.  I just handed them to him so that he could see for himself.  He was impressed, but what he said really struck me in a good way, as I had been thinking more or less the same thing.  He asked if I read any poetry.

All that came to mind back then were two poems, starkly different in style, that now seem to me interesting examples of poetry to compare and contrast.  But worry not, I won’t try it here!  They were Thomas’ perhaps best-remembered work that, years later, I compared to my dad in an essay I wrote for the English Comp AP course I took at NMSU in Las Cruces, and Alfred, Lord Tennyson’s “Tears, Idle Tears.”  While the former was and remains a favorite example of the artform I consider the highest to which any writer can aspire, I used to make my friends laugh with my lachrymose recitations of the latter.  I didn’t even consider the obvious, that my memorization of both and occasional sensitive spoken interpretations of Thomas’ masterpiece yet crass and venomous performances of Tennyson’s work of equal value were reflections of the mirror I gazed into every time I spoke his beautiful, insightful words in immature lampoonery.

My dad is the person who turned me on to e.e. cummings, and to him I now owe the fact I remembered the lines from the opening quote.  In fact I owe so much more to the man, parts of it good and others not so.  But all things considered, I turned out okay.  Now I miss him more than ever and feel his irrecoverable absence like a horrible sting.

At any rate, this blog is about a Kaywoodie Super Grain Dublin #08 that is almost as old as my dad was.  The left shank nomenclature approximates its age to the 1930s with the placement of SUPER GRAIN above KAYWOODIE, and the right shank imprints of IMPORTED BRIAR and 08 narrow the timeline to 1935-1938.  Every part of this beautiful pipe is original, including the stem and patented Drinkless stinger with the word etched into it.  If this pipe was around in 1936, its price would have been $5.  But more than the absence of the usual four-digit shape number connected with Kaywoodie pipes from this period, I’m having trouble imagining my dad no bigger than a boy of five.

RESTORATION This Super Grain was in amazing condition for a pipe well into its 80s!  The only problems presenting were normal rim char, well-maintained cake buildup and the almost mandatory, for Kaywoodies, mis-clocked stem.  Something told me that might more or less fix itself before the project was complete.I dunked the stem in an OxiClean bath and planned on letting it stay there longer than usual, given that the old Vulcanite was almost solid yellow-green, whatever that color is called.  I also had errands to run.  When I returned home a couple of hours later, I removed the stem from the nasty, dark bathwater, ran a pipe cleaner through the airhole, rinsed and scrubbed it with my thumbs and fingers and dried it off.  A little piece of 320-grit paper made it solid black again.  [I restored this pipe not long ago, but as I noted in my last blog, I had not yet learned how effective going straight to 1000-grit paper can be.  That’s where I’ll start from now on.  This time I lucked out.]I continued work on the stem and started on the rim burn with a soft green Brillo pad that brought out a soft shine on the stem, which may very well be the first one I’ve come across with no scratches that needed removing, much less tooth chatter or even a chink in the lip, top or bottom.  For the rim, the Brillo was a beginning.Finishing the stem with 400-, 600- and 1000-grit papers followed by a full run of micro mesh from 1500-12000, I turned to a piece of super fine “0000” steel wool for the remainder of black on the rim.Again, not being aware of how great a job 1000-grit paper does, I continued work on the rim with 320-grit.  Everything worked out in the end, but really, I had no idea how much extra work I’ve been doing!  In fact, I understand now how bad was the habit into which I had fallen.Smoothing the rim with 400- to 1000-grit papers, and in the process returning the grain to normal since I didn’t use the least abrasive grade in the first place, I finished that stage in anticipation of a spot stain there after micro meshing.  In the meantime, I reamed the chamber and sanded with 150- and 220-grit papers.  That was supposed to be just the start, but the mature and venerable Dublin was so loved and respected by its previous (and, I think, only other) owner that the chamber wall was baby smooth to the touch.I had forgotten the wonderful quality of briar and other woods to reacquire their original hue after being sanded down to a lighter shade and then worked back up with finer and finer grades of paper.  Therefore I was surprised but happy to see the lovely, mottled, somewhat leopard-like spots and blotches on the rim, and the natural shiny dark brown color that matched the whole surface, with the following full micro mesh of the stummel.  The thought occurred to me that when the pipe was first crafted, no stain might have been applied.The only thing left to do was retort the pipe.  This step further revealed that whoever was the guardian of this magnificent specimen of pipehood was also good enough to enjoy it quite often.  Four test tubes full of alcohol had to be boiled through the inner passageways from the lip of the stem to the top of the chamber before it was almost clear.Don’t take this as bragging because I know I had nothing to do with the skill and care that went into the very vintage Kaywoodie’s genesis – all I did was make it show again – but the color and shine of the wood were perfect as-is at that point and, as far as I could see, needed no further help.  And so, I didn’t even buff it on the wheel for the first time in my experience with pipes.  But to return the stem to the same sheen, I buffed it on the electric wheel with White and Red Tripoli. Oh, and I just remembered the other two aspects of the pipe I noted earlier but almost forgot to address, because, as with some other aspects of the restoration, I forgot to snap a shot of one and deleted the other considering its apparent superfluousness.  The stinger that was misaligned at first indeed did correct itself, with a small nudge, or firm but careful twist, rather, from me. And then there was my mention of the almost incredible fact that the Drinkless stem, with its four-holed ball at the end to be inserted into the shank – which ball, by the way, resembles an antique naval mine with its detonator legs removed, or is it just me? – was etched with the word DRINKLESS.   The shot above, enhanced by photo editing software with which I am at last becoming more adept, illustrates both the screwed-up (pun intended) aspect of the stinger and the etching.  Worth mentioning, to me at least, are Pipephil’s details that include such tidbits as these: the original Drinkless patent (No. 213598) had a push-in design that was used from 1924-1931; the updated version with the same patent number became the longer screw-in and is stated as being used from 1929 until as recently as the 1960s, and in 1932 the SynchroStem patent was granted in favor of the Drinkless.  The newer Drinkless stingers also had the words “REG. NO. 213598 etched under the Drinkless designation, although I didn’t look closely enough or take a good enough photo to show it.But – and here is where all the confusion reaches its zenith – Kaywoodie decided to move toward a three-hole stinger at an “indeterminate date.”

Ah, the joys of dating a pipe!  The Super Grain in this blog, however, is a definite match for the period 1935-1938.  I’m beginning to think pipes, like some people, should only be enjoyed, never dated. 😊

CONCLUSION
My dad was an avid pipe smoker until my mother, sister and two step-sisters put an end to that.  I say they did it, but the sad truth I still regret to this day is that I let them drag me into the brouhaha: the incessant reminding him, every time he sat down to relax and light up, of what the ninth U.S. Surgeon General, a well-meaning and for the most part dead-on man by the name of Luther L. Terry, MD, had reported two years after I was born, to wit, that smoking tobacco tends to have “an adverse impact…[on] health worldwide,” and the steady buildup to more snide comments such as the amount of time every use of tobacco deprived people of life (not counting the comments about second-hand smoke).  By the end, the unwarranted and downright cruel attacks on my dad by all of us had escalated to all-out war.  In the end, my dad surrendered and vowed to stop smoking his impressive collection of the beautiful briar works of art and implements of deep contemplation.

In my defense, this was all going down around 1968, when I was a mere lad of six.  But I can still picture the vast assortment of mostly smooth, easy bent billiards he favored, though there were some that were sandblasted also, and even more interesting, longer, straight ones I now understand were Canadians or others of that family.  In my mind I can see them now with such clarity that, given the experience I have had in some of the intervening years, I am positive they were all created by the greatest English makers of those times and these.

In other words, my dad was not keen on American brands the likes of Kaywoodie.  But he was a man whose tastes changed, like most of us, and I suspect that had we left him alone to his peaceful enjoyment of his pipes, his collection would have evolved.  If only we had not badgered him into submission, if only he had stood his ground and just said no, if only we had not grown apart – I might very well have given him this pipe for his last birthday.  And I’m sure he would have lived just as long as the 85 years he lasted before dementia and other non-smoking-related problems took him.

In a letter, Dylan Thomas described his approach to writing this way: “I make one image—though ‘make’ is not the right word; I let, perhaps, an image be ‘made’ emotionally in me and then apply to it what intellectual & critical forces I possess—let it breed another, let that image contradict the first, make, of the third image bred out of the other two together, a fourth contradictory image, and let them all, within my imposed formal limits, conflict.”

That’s my dad, to a tee.  Still, I love him and miss him more now than I did the long years he decided not to communicate with me anymore.  So now, as still another great poet wrote, I sound my barbaric yawp.

He wasn’t big on crying, so I’m going to have to stop here.

SOURCES
https://www.poets.org/poetsorg/poem/my-father-moved-through-dooms-love-0
https://genius.com/Dylan-thomas-do-not-go-gentle-into-that-good-night-annotated
https://www.poetryfoundation.org/poems/45384/the-princess-tears-idle-tears
http://www.pipephil.eu/logos/en/logo-kaywoodie-2.html
https://pipedia.org/wiki/Kaywoodie_Shape_Numbers
https://pipedia.org/index.php?title=Collector%27s_Guide_to_Kaywoodie_Pipes&mobileaction=toggle_view_mobile#1936_Kaywoodie_Shape_Numbers_and_Descriptions
http://www.pipephil.eu/logos/en/infos/kaywoodie-drink.html
http://www.pipephil.eu/logos/en/infos/kaywoodie-synchro.html
http://www.pipephil.eu/logos/en/infos/kaywoodie-3stinger.html