Tag Archives: bowl topping

My Future Daughter-in-Law Commissions a Sculpted Bent Billiard as a Gift for Her Father

Blog by Dal Stanton

When your son brings home (to Bulgaria!) a young woman for you to meet, you know it’s serious. That’s what happened this past Christmas! Our son, Josiah, who lives in St. Louis, Missouri, brought Katie, who lives in Chattanooga, Tennessee, to Sofia to meet Mom and Dad – no pressure on her! They met in college and after graduation, they stayed in touch as friends, Josiah ending up in St. Louis where he finished his master’s degree and is now a counselor. Katie stayed in Chattanooga and works on staff with youth in a church. Our daughter and husband also made the trip to Sofia from Nashville for a quintessential Bulgarian Christmas. The family was together at the Sofia Airport when Josiah (center) and Katie (flowers 😊) arrived from the US. Johanna and Niko had arrived a few days earlier – ready to celebrate Christmas!

As you would expect, we had limited time with our kids, and we packed it as full as we could! What Christmas celebration would be complete without including snow, riding gondolas and skiing in Bulgaria’s beautiful Pirin Mountains and spending time together as a family AND getting to know the young women who would become our future daughter-in-law in August. The time with our kids went too quickly, but before they left, Katie’s future father-in-law was an interesting character with the moniker, The Pipe Steward, and she was interested in finding a special pipe she could commission from The Pipe Steward to give to her father as a gift for his birthday. Unlike most people who go through the virtual ‘Help me!’ baskets in the online collection I call, For “Pipe Dreamers” Only!, Katie was able to go through the physical boxes of my inventory to find the perfect pipe that called her name for her father. What added to the experience was that Katie knew that the pipe she chose would benefit the Daughters of Bulgaria! The pipe that got Katie’s attention after listening to many, many pipes, was a very hopeful Sculpted 3/4 Bent Billiard with only the marking, ‘IMPORTED Briar’ on the left shank flank which I had acquired from the Lot of 66 – a huge Lot of pipes that came from a non-profit in Georgetown, Texas, called the Caring Place. Here are some of the original pictures I took when the Lot of 66 arrived. Christmas is now, long gone, our world has changed by the covid-19 pandemic, the kids are in the US navigating life, and Katie’s pipe for her father is now on my worktable. I take a closer look at the Sculpted Bent Billiard with some pictures. There is genuinely nice briar grain lurking beneath the darkened, tired finish – many bird’s eye formations draw my attention. The upper bowl surface is darkened in comparison to the other briar landscape indicating potential overheating problems which may be revealed when the chamber is cleared of the cake.The rim is in rough shape with thick lava flow and nicks and skinned edges – it’s been a well-used pipe!The picture doesn’t show the thick carbon cake buildup that I can see with the eye. The chamber closes and narrows as you move toward the chamber floor.The mortise is too loose so that the tenon has no grab. This needs to be addressed and tightened.The stem has deep oxidation and calcium buildup on the bit area. The button needs refreshing.The nomenclature is thin with only ‘Imported Briar’ on the shank. The spelling of briar probably indicates this to be a US manufactured pipe. To begin the restoration of Katie’s pipe, the stem’s airway is cleaned with a pipe cleaner wetted in isopropyl 95%.With the oxidation being so deep and with the calcium buildup, I get a head start on removing the oxidation using 000 grade steel wool along with a ‘Soft Scrub-like’ product I can get here in Bulgaria. This helps with the cleaning before putting the stem into the soak.The next step is to give the stem a soak in Before & After Deoxidizer that does an adequate job of removing oxidation that isn’t too deep. The stem joins other stems and pipes in the queue. I let it soak for several hours.After removing the stem from the Deoxidizer, I let the liquid drain and I squeegee the stem with my fingers. I then use cotton pads wetted with isopropyl 95% to wipe the stem removing raised oxidation. I clear the fluid from the airway with a few pipe cleaners also wetted with isopropyl 95%.To help condition the vulcanite stem, paraffin oil is applied with a cotton pad. Paraffin Oil is a mineral oil. I then put the stem aside to give time for the oil to be absorbed.Next, turning to the bowl, I use the Pipnet Reaming Kit to start clearing the hard, thick carbon cake from the chamber. I use 3 of the 4 blade heads available in the kit to ream the bowl. I follow the reaming tool by scraping the chamber wall with the Savinelli Fitsall Tool. I finish by sanding the chamber with 240 paper wrapped around a Sharpie Pen. After wiping the chamber with a cotton pad wetted with alcohol, I discover what appears to be some heating damage on the upper backside of the chamber – behind the sculpting. There is a hole with a crevasse cutting to the left from the deep pit. This will need attention after the cleaning of the stummel is completed.Next, I continue with the cleaning of the external surface using undiluted Murphy’s Oil Soap on a cotton pad. I also utilize a brass bristled brush to work on the lava covered rim. Brass does not damage the briar and adds some cleaning power. I transport the pipe to the kitchen sink and continue the cleaning using shank brushes and anti-oil dish soap. With the brushes the mortise is scrubbed. After a thorough rinsing, the bowl is back on the worktable.The rim cleaned up revealing the internal edge burn damage from lighting practices on the right side of the bowl. This will be addressed later.The bigger surprise comes after inspection of the sculpted area. The center of the sculpting is a filler. The question is, was the sculpting used to hide an imperfection in the briar itself or to blend a repair possibly caused by a burn-through? I don’t believe it’s a burn through, but the fill corresponds to the hole in the chamber.Using a dental probe, it doesn’t take much to clean the hole and to complete the tunnel passageway to the chamber. Daylight is now visible looking from the inside. Ugh. There appears to be a lateral crack that the sculpting has incorporated. This pipe falls into the ‘Dreamer’ category but is not beyond hope! The briar surface is nice, and this challenge I hope does not create too much of an obstacle. Continuing with the cleaning regimen, I return to cleaning the internals using cotton buds and pipe cleaners wetted with isopropyl 95%. I discover that a couple pipe cleaners and one cotton bud are all that is needed. The internals are clean.My approach to repairing the hole in the stummel is to first start with applying briar dust putty to the external briar side. I don’t push the putty through into the chamber but leave a gap that will be filled with JB Weld on the internal fire side. Using burrs with the Dremel, I’ll ‘re-sculpt’ the external surface to blend the patch. Working on a plastic disk as a mixing palette, scotch tape helps with an easy cleanup. After cleaning the area with alcohol, I begin by mixing briar dust with BSI Extra Thick Maxi-Cure CA glue using a toothpick. I draw briar dust into the puddle of glue until the thickness is that of molasses. I then use the toothpick to trowel the putty to the hole. I press the putty into the hole partially to fill it. I use an accelerator to quicken the curing and to hold the patch in place. After the briar dust putty is fully cured, the next step is to apply JB Weld to the internal fracture and crevasse. JB Weld is heat resistant and works well has a chamber repair. I mix equal parts of the ‘Steel Resin’ and the ‘Hardener’ and then mix with a toothpick. The mixed epoxy begins to harden in about 4 minutes giving plenty of time to apply the Weld to the hole and to the crevasse running from it. After applied, I set the stummel aside for some hours for the patch to cure. Switching my focus now to the stem, to expand the tooth compressions on the upper and lower bit, I first use the heating method. Using a Bic lighter, I paint the bit with the flame thereby warming and expanding the rubber compound, vulcanite. I take before and after pictures to show the comparison on the upper and lower. The heating method may have helped some, but not enough to avoid using Black CA glue to spot drop patches on the upper and lower bit. After applying the CA glue, I put the stem aside for the patches to cure.With the stem on the side curing, I turn again to the stummel. The JB Weld patch has fully cured. To remove the excess epoxy and to smooth the chamber wall, I mount a sanding drum to the Dremel. It does a quick and good job. I then sand and smooth the chamber patch using 240 grade paper wrapped around a Sharpie Pen. The patch looks good conforming exactly to the hole and crevasse it filled. The rim has sustained a good bit of damage on the right inner edge. My first thought was to top the stummel at this point to remove the damage. After a second thought, this would remove a good bit of briar real estate from the rim. Instead, I decide to rebuild the inner edge using briar dust putty then after the patch cures to top and sand the rim. I first remove all the residual carbon from the surface from the lighting damage that caused the problems. I brush the area with the brass wired brush as well as sand it with 240 paper getting down to fresh briar.This picture shows the damage to the rim well and the area needing to be rebuilt.I mix briar dust with Extra Thick CA glue by gradually pulling briar dust into the puddle until it reaches the thickness of molasses. Then the briar putty is applied with the toothpick to the inside of the lip to build up toward the rim and in toward the chamber. I use an accelerator to quicken the curing process. Allowing the rim patch to thoroughly cure, I turn back to the stem filing and sanding the black CA glue patches on the upper and lower bit. I use the file to refresh and redefine the button. The sanding is expanded to the entire stem to remove vestiges of oxidation.Following the 240 sanding paper, the stem is wet sanded with 600 grade paper followed by applying 000 grade steel wool. The stem is shaping up nicely.The rim briar dust putty rebuild is fully cured and using the sanding drum mounted onto the Dremel, I begin removing the excess patch material on the internal chamber wall. The goal is to restore a rounded chamber. Next, the excess patch material is removed from the rim top.I also smooth out the external hole path in the sculpted area. With the excess patch material removed from the rim, I then take the stummel to the topping board. I removed the excess first so that the topping will be more balanced and not get pushed off or out of balance because of the different level of surface. I start first with 240 sanding paper on the chopping board. After some rotations on the board, the ‘roundness’ or lack of, of the chamber becomes more distinct. I return to the sanding drum on the Dremel to continue to round the chamber wall and rim edge. This goes slowly to make sure not to take too much off! I also use 240 sanding paper rolled to clean the outer and inner edges of the rim. It’s looking good.After changing the topping board to 600 grade paper, the stummel is rotated several more times. I like what I see. The rim rebuild patch looks good and the rim’s balance has been restored without great loss of briar off the top of the bowl.Before continuing with sanding the stummel, I attach a burr to the stummel to shape the sculpting. I try to match some swings and swirls but dipping in and out with the burr is pretty random. At the end, I think it looks good.I plan to apply a light brown dye to the stummel. To clean the surface and to help to lighten the dark spots caused by heating, especially near the rim, I apply sanding sponges. I usually use 3 sanding sponges – coarse, medium and light to finish. I add a coarser sponge to this regimen with a total of 4 sanding cycles. The grain has started to emerge. I continue by using the full regimen of micromesh pads. Starting with pads 1500 to 2400 I wet sand. Following this, dry sanding with pads 3200 to 4000 and 6000 to 12000 bring out the latent grain in the briar. I’m liking the appearance of several bird’s eye swirls. The grain is lively and expressive. The stummel still shows darkened areas from charring and heating. This is especially on the rim and near the top of the bowl. I decided early on with the repairs and the briar blemishes, that I would apply Fiebing’s Light Brown Leather Dye to the briar surface. I assemble the dying module on my work desk.I begin by heating the stummel with a hot air gun. The gun heats and expands the briar helping it to be more receptive to the dye. I then paint the stummel with the aniline dye using a folded pipe cleaner and with each section, I ‘flame it’ by lighting it with the lit candle with the result that the alcohol in the dye combusts leaving behind the dye pigment.I thoroughly apply the dye and fire it making sure the entire stummel has been covered. The stummel is then set aside for several hours to ‘rest’. This allows the new dye to be absorbed into the briar grain.With the stummel resting, I turn again to the stem. I apply the full regiment of micromesh pads by wet sanding with pads 1500 to 2400 and dry sanding with pads 3200 to 4000 and 6000 to 12000. Between each set of 3 pads, Obsidian Oil is applied to help condition the stem and to protect from oxidation. The newly dyed stummel has been resting for several hours and it’s time to ‘unwrap’ the fire crusted shell. I use a felt buffing wheel mounted on the Dremel at the lowest speed. Using the felt wheel Tripoli compound is applied to the stummel surface.Next, I wipe the stummel with a cotton pad wetted with alcohol not so much to lighten but to remove excess dye ‘clumped up’ that was missed through the buffing process.Next, I reunite stem and stummel and apply (stem attachment not shown!) and apply Blue Diamond compound. With a cotton buffing wheel attached to the Dremel, the speed is set at approximately 40% full power and the compound is applied to pipe. After applying the compound, a felt cloth is used to wipe/buff the pipe to remove any compound dust in preparation for adding wax.I had observed earlier that the stem was loose. There is too much play with the mortise fitting. To remedy this, I use the smooth end of a drill bit, one-step larger than the airway diameter. I then heat the mortise carefully with a Bic lighter to warm the vulcanite making it more supple. As the mortise heats, I gently insert the larger drill bit into the airway expanding the diameter of the tenon as I go. The procedure works well. The mortise-tenon fit is snugger as it should be.Next, just to help guard against dye leeching when the pipe is first put into service, I reheat the stummel and wipe it well with a cotton cloth. This emulates the heating when the pipe is first put into service. Sometimes, newly dyed stummels will leech the dye when they are first used coloring the new steward’s fingers – in this case, Katie’s father! I don’t want this to happen!With the repair having been done to the upper chamber with the filling of the hole with JB Weld, a protective coating of natural Bulgarian yogurt and activated charcoal will help initiate a layer for a carbon cake to develop. The normal healthy cake width for a chamber is the width of a US dime. Not much, but this helps to guard the briar in the fire chamber. I add the charcoal to a small amount of natural yogurt. Sour cream can also be used.I add charcoal until the mud mixture will not drip off the pipe nail but remains firm.After putting a pipe cleaner in the airway to guard the draft hole from being obstructed, I then trowel the mud into the chamber and cover the chamber wall thoroughly. The hour is late, so I put the stummel aside for the mud to dry through the night. The next day, after rejoining stem and stummel, carnauba wax is applied to the entire pipe. Another cotton cloth buffing wheel is mounted on the Dremel for this purpose and the speed is maintained at 40% full power. After the application of a few coats of wax, the pipe is given a rigorous hand buffing with a microfiber cloth to remove any excess wax and to raise the shine.Wow! This Sculpted 3/4 Bent Billiard had some issues to work through. The hole repair and the rim were the largest challenges and I’m pleased with how these repairs turned out. The briar grain is fun and expressive and really made an appearance through the dying and buffing process. I’m pleased and I trust that my future daughter-in-law, Katie, will be pleased as well as she gives this pipe to her father as a gift for his birthday. What makes this gift even more valuable is that this pipe benefits the Daughters of Bulgaria – women and girls who have been trafficked and sexually exploited. Thanks for joining me!

Refurbishing A Vintage Corn Cob Pipe With An Albatross Wing Bone

2 Replies

Blog by Paresh Deshpande

I had recently worked on one large, humongous sized pipe which definitely did not qualify as beautiful but surely can be termed as ruggedly handsome, from an estate lot of 40 pipes that I had acquired about six months ago. Here is the link to that write up which will provide a background to this lot and the condition of the pipes that I had received (https://rebornpipes.com/2020/03/08/refurbishing-a-real-cherry-foreign-pipe-from-estate-lot-of-40/).

The second pipe from this lot currently on my work table, is again a very long pipe that is both ruggedly beautiful and delicate at the same time. It’s a Corn Cob (ruggedly beautiful aspect) with a 15 inch long thin bone stem (the delicate aspect). This pipe is marked with a green arrow in the picture below and readers will also get a general idea about the size and delicate beauty of this pipe.Holding this pipe in hand really makes me wonder as to how anyone could let go off such an exquisite pipe. Well, someone’s loss is my gain!! I have never come across anything like this pipe till date. It’s a Corn Cob in Acorn shape with a long (15 inches) thin single piece bone stem. The cob is covered in a tightly crocheted jute bag which extends from the bottom and up to two third height of the stummel. The bone stem is attached to the stummel and cannot be removed. There is no stamping visible over the entire pipe. Here is how the pipe looks as it sits on my work table. I absolutely had no clue or thread to follow to know the vintage or maker of such pipes as the pipe is devoid of any stampings. To know more about the provenance of this pipe, I posted pictures of this pipe on one of the active pipe restorers group on Face Book. However, apart from a few likes, there was no information that was forthcoming from the viewers. I reached out to my friend, mentor and guru, Steve Laug. He suggested that this pipe is “most probably a homemade job what with the crocheted cap, the whole thing”. As regards the stem, he thought that it could be reed stem. When I confirmed it to be a bone stem and my appreciation that given the lightness, length and size, it could be an Albatross wing bone, he concurred that “odds definitely are very good for it to be an Albatross wing bone as they have that kind of wing span”.

He further suggested the pipe to be from the period 1920s to 1930s. According to him, with the crochet cap and the delicate nature of this pipe, it could well be a woman’s’ pipe and shared pictures of old grannies smoking such pipes.Well, I would go with the input provided with Steve and given the historical documented proof that Albatross feather hunting was banned in 1922, this homemade corn cob ladies pipe could be broadly dated to have been made in the 1920s.

Any clarification/confirmed input on this pipe are requested from all the learned readers of this write up!!

Initial Visual Inspection
The chamber has a decent and uneven layer of dry and hard cake. It seems that the chamber walls themselves are uneven, the condition of which can be ascertained only after the cake has been removed to expose the walls. The rim top surface is highly uneven with the indentations of the chaff being clearly visible and intermingled with chipped surface areas. However, there are no signs of charring to the rim edges. I shall decide if I would top the rim to try and make it perfectly even. The stummel is partially covered in thick brown paper under a crocheted cap made out of jute. This is covered in dust and grime. The brown paper has either torn away from the top half or possibly was meant to cover the bottom half of the stummel. The rustic and unrefined finish that presents itself makes commenting on it with any degree of certainty, well neigh a difficult task. The old cob has aged well and feels rugged in its patchy and scaly texture of the chaff and dark color. The stummel has no shank and the long, delicate and slender Albatross wing bone stem is permanently attached to the stummel itself. The Albatross wing bone is covered in dust and dirt from the outside while the insides show few dark areas signifying accumulated old oils and tars in the air way. However, the bone has colored well with age, I say. It will be a challenge to clean the stem internals as I do not have such long pipe cleaners and with the stem fixed in to the stummel, makes cleaning impossible from the other end. The stem end is uneven but I didn’t feel any jagged edges, so I think I shall let it be just to maintain that rustic homemade look and feel of this pipe.The Process
I began the process of refurbishing this pipe first by working on the stummel. The crocheted jute cap initially had some give to it and very carefully and delicately, I separated the cap from the stummel. The thick brown paper that covered the bottom half of the cob was intact. It’s my guess that the purpose of this paper was to provide some insulation for the hands from the heat of the burning tobacco. I washed the crocheted jute cap using a detergent and toothbrush to clean the surface of all the dirt, dust and grime of yesteryears. I set it out to dry naturally without wringing it as I feared that the weave may unravel. I reamed the chamber with a Castleford reamer tool, using the size four head of the tool. Using my fabricated knife; I further took the cake down to the bare wood. With a 150 grit sand paper, the walls of the chamber were rid of all the remnants of the cake, revealing solid chamber walls. I further wiped the chamber with a cotton swab wetted with isopropyl alcohol to completely remove the sanding dust. The uneven chamber wall appears to be natural and akin to the slots where the cob kernels are attached (chaff). The rim surface was too uneven. Again the rim top appears uneven due to the chaff slots and this brings me to the question whether I should attempt to top it and get the rim surface as even as possible or let it remain as is…natural look! I discussed it with Abha, my wife, and it was decided that the rim should be topped just sufficient to make it even but not too much that the natural chaff slots are all but lost. Truth be told, I did not understand what exactly was needed other than the fact that topping was essential. I topped it on a 180 grit sand paper, frequently showing it to Abha and continued till she liked the looks of the rim top. That I too liked it goes without saying!! Here is how the rim appears at this stage. Next, I cleaned up the stem air way with liquid detergent, pipe cleaners and cotton swabs. The stem internals cleaned up nicely with a smooth and full draw. I followed up the internal cleaning with cleaning the external surface of the albatross wing bone stem. I cleaned the wing bone surface with dish washing detergent and Scotch Brite and followed it up with a piece of 0000 grade steel wool. The Albatross wing bone stem is now nice and clean. With the cleaning of the wing bone stem complete, I polished the stem with micromesh pads, wet sanding with 1500 through 12000 grit pads. The off white residue that was seen during the polishing further confirmed the stem material to be bone. The length of the stem, diameter of the hole and lightness has left no doubts in my mind that this has to be an Albatross wing bone.I applied “Briar Cleaner”, a product that has been developed by my friend Mark Hoover, to the external surface of the bowl. It works similar to Murphy’s oil soap and needs to be applied to the stummel surface and set aside for 5-10 minutes. The product pulls out all the dirt and grime to the surface making further cleaning easy. I am quite happy with this product. I used a hard bristled tooth brush to scrub the stummel with the solution, wiped it clean with a moist cloth and dried it using paper towels and soft cotton cloth. I deliberately cleaned the rim and set the stummel aside to dry out naturally. Staying with the stummel restoration, I polished the rim top surface with micromesh pads, wet sanding with 1500 to 12000 pads. I wiped the surface with a soft cloth at the end of the micromesh cycle. The rim top surface looks nice with a deep shine. I rubbed a small quantity of “Before and After Restoration Balm” in to the cob stummel to enliven and protect it. I rubbed this balm deep in to the patchy/ scaly surfaces of the stummel and smooth rim top with my fingers and let it rest for a few minutes. The balm almost immediately works its magic and the cob now has a nice vibrant appearance. I further buff it with a horse hair shoe brush. At this stage in restoration, I reattached the crocheted jute cap with the stummel. To complete the refurbishing, I gave a vigorous hand buff to the cob stummel with a microfibre cloth to deepen the dark colouration and shine on the cob. Needless to say, I was careful with the jute cap least I unravel the stitches. This rustic finish, unrefined and most likely home made pipe has a charm that can only be felt while holding it and will definitely find a place of pride in my modest collection. Whether or not I shall smoke it, I cannot say at this point in time, but in case the pipe calls out to me and shares its life story, I shall love to smoke it while listening to it. Here are some pictures of the refurbished pipe. P.S. This is in no way a beautiful well crafted pipe, but a rustic and delicate looking one with such solid construction that it feels capable of lasting for ages!! The pictures of the old ladies sitting around with their grandchildren in many ways remind me of my grand old man!! Thanks for sharing these pictures, Steve!

I should also mention here that this pipe has, by far, been the most difficult pipe to capture on camera for its length, beauty and appeal. Appreciate your patience in reading thus far and looking forward to input on the write up and any information/additional snippets/ clarifications on this pipe. Cheers…

Praying for the safety and well being of all the readers and their loved ones in these troubled times…

Breathing Life into a 1957 (or is it a 1967) Dunhill Root Briar 251 EX606 Billiard

2 Replies

Blog by Steve Laug

The next pipe on the table came to us from one of Jeff’s pipe hunts on the Oregon Coast. It is a Dunhill Root Briar Billiard that is in decent condition. It is stamped EX606 over 251 which is the shape number followed by Dunhill over Root Briar on the left side of the shank. On the right side it is stamped with the 3R (which is the Group size and the R for Root Briar) and to the left is reads Made in England with what looks like a 7 superscript to me and 0 which gives the date the pipe was made. The stamping is clear and readable. The pipe has a medium brown finish and some amazing grain that the shape follows well. The finish was very dirty with grime ground into the grain around bowl sides. The bowl had a thick cake in the bowl and a heavy lava overflow on the top and the inner edge of the top. There was a burn mark on the left outer edge of the bowl. It was hard to know the overall condition of the rim top and edges because of the grime. The stem was dirty, oxidized and had some calcification around the button. There was light tooth chatter and marks on the stem near the button on both sides. The stem has the Dunhill White Spot logo on the top of the taper stem. Jeff took photos of the pipe to show what it looked like before he cleaned it up. Jeff took photos of the rim top to show the thick cake in the bowl and the lava overflow on the top and damage to the outer edge of the rim. The photos show the rim top and bowl from various angles.Jeff took some photos of the bowl sides and heel to show the nice grain that was on this bowl. It is a quite beautifully grained pipe. The stamping on each side of the shank is shown in the photos below. They look very good and readable. Here is where the question comes in on the date – is the 7 after the D in England on the third photo below a superscript or is it the same as the D. To me it is a superscript. You can also see the White Spot on the top of the taper stem in the last of the four photos below. The stem was a very good fit to the shank. It was oxidized, calcified and had debris stuck to the surface of the vulcanite. There was tooth chatter and marks on both sides of the stem and on the button surface. I turned to Pipedia’s section on Dunhill Root Briar to get a bit of background on this particular Duhill finish (https://pipedia.org/wiki/Dunhill#Root_Briar). I quote:

Introduced in 1931 and highly prized because the grain is more pronounced in this finish (usually made using Corsican briar). The Root Briar finish requires a perfectly clean bowl with excellent graining. Therefore, it is the most expensive of the Dunhill pipes. Corsican briar was most often used for the Root finish since it was generally more finely grained. This is a rare finish, due to the scarcity of briar suitable to achieve it. These pipes are normally only available at Company stores, or at Principle Pipe Dealers. Straight grained pipes were formerly graded A through H, but are now only “Dr’s” and graded with one to six stars, with the letters G and H still used for the very finest pieces.

The article also cited a section from John Loring confirming the above information and giving a bit more colour to the information.

“Dunhill introduced its third major finish, the Root finish, in 1931. Corsican mountain briar is characteristically beautifully grained and the Root was made exclusively from that briar into the 1960s. The pipe was finished with a light natural stain to allow the beauty of the graining to show through. Although always available with a traditional black vulcanite bit, the Root was introduced in either 1930 or more likely 1931 and fitted with a marble brown dark and light grained vulcanite bit that has since become known as the ‘bowling ball’ bit because of the similarity in appearance between the bit’s finish and that of some bowling balls of the time. With the war, however, the bowling ball bit was dropped from production. Through 1954 (and after) the Root pipe nomenclature (including shape numbers) was identical to that of the Bruyere except that instead of the “A” of the Bruyere, the Root was stamped with an “R”. In 1952 when the finish rather than LONDON was placed under DUNHILL, ROOT BRIAR rather than BRUYERE was used for the Root.” Loring, J. C., The Dunhill Briar Pipe, The Patent Years and After (self-published, Chicago, 1998).

I have also included a chart from the site from Dunhill spelling out the Standard Pipe Finishes and giving short information and a timeline.

I also wanted to understand the additional stamps on the shank. There were two I wanted to clarify. One the left side there was the EX606 over the shape number. On the right side there was the superscript Date code and a second number – an underlined 0. I continued to search the connected pages on Dunhill. There was a specific page or section on the Dunhill Additional Stamps that helped some (https://pipedia.org/wiki/Dunhill_Additional_Stamps).

“The reason for dating a pipe was due to a one-year-guarantee offered by Dunhill, that they would replace a pipe if it had any issues in its first year. Sometimes, a pipe would be made and stamped, yet wouldn’t leave the factory until the next year or even later, when it would then receive a current extra date-code. Due to this, there are several examples of pipes with double, triple, or even quadruple date-codes stamped onto them.” Steven Snyder.

These additional codes were added by the retail stores – that’s why they were not uniform. For example, situations that the pipes were not sold in the same year of production, it was a way to establish a new warranty period. In cases where the customer requested a F/T stem (for example) or some minor cosmetic issue was found, the pipe returned to the factory and, in some cases, received a new coverage date. In these situations the extra date-code is uniform.

“It might have been added by the point-of-sales (shop, when the pipe was actually sold, so the guarantee period was easier to identify.” Hener, K. S., Product Line Director – The White Spot Smoker’s Accessory Division and Walthamstow site.

There is a bit of question as to the date on this pipe. I have had people on the various groups on Facebook say it is a 1957 sold in 1960 pipe and others say it is a 1967 sold in 1970 pipe. All of the dating is dependent on how you see the 7 after the D in England. I turned to Pipephil (http://www.pipephil.eu/logos/en/dunhill/cledat-en1a.html) to see what I could find out. Here is the chart I used and I have drawn a red box around the portion I used.I also captured the stamping on two separate pipes to show my conclusion. The first one shows the stamp on a 1967 pipe with the 7 being essentially the same size as the D in England. The second one is a 1958 pipe with a smaller superscript that is in the same placement as the 7 on the pipe that I have in hand. So I am pretty confident that the double date stamp was the year the pipe was made and the year that it sold. In this case it was a 1957 pipe that sold in 1960.

I turned to Eric Boehm’s part of the article on the Pipedia section on the Dunhill shapes. I found the listing for the Billiard that I was working on but still no information on the EX 606 number above it (https://pipedia.org/wiki/Dunhill_Shapes_List). I quote:

251 Billiard, tapered bit (Relief bit) 3 5¾” 1950 3

That fits this pipe perfectly – a billiard with a tapered stem with a length of 5 ¾ inches. First used in 1950 in a Group 3 size.

I posted a question on the stamping on the Tobacco Pipe Restorers Group on Facebook and got this response from Alfredo Baquerizo:

This is a Root Briar from 1957 shape 251, group 3 and the R is for root. It’s an EX an exchange pipe by warranty Dunhill system. The 606 I think that is the exchange pipe number, I’m not sure.

I also posted on the Vintage Dunhill Pipes Group on Facebook and enjoyed the responses. One of the posters there, Jean-Paul Varon gave this information.

Ex606 = exchange of a pipe under guarantee.

That was the extent of the information that I could find at this point. It seems likely that the EX is the Dunhill Exchange Warranty system and the 606 could well be the Exchange pipe number. Is it possible that the EX606 could also include a date code in it? Possibly being the year 1960 and the sixth pipe of the year that was a replacement?

I turned to work on the pipe itself. Jeff had done a great job cleaning up the pipe as usual. He reamed the pipe with a PipNet reamer and cut back the cake back to the bare briar. He cleaned up the walls with a Savinelli Fitsall Pipe Knife. He scrubbed the interior of the bowl and shank with pipe cleaners, cotton swabs and alcohol to remove the tars and oils. He scrubbed the exterior of the pipe with Murphy’s Oil Soap and a tooth brush to remove the grime from the finish. He worked on the rim top lava and darkening with the soap and tooth brush. He scrubbed the inside of the stem with alcohol and pipe cleaners. He scrubbed the exterior with Soft Scrub and then soaked it in Before & After Deoxidizer. He washed it off with warm water to remove the deoxidizer. The pipe looked far better. I took photos of the pipe when I received it before I started working on it. I took photos of the bowl and rim top as well as the stem to show their condition. You can see the damage to the rim topo and inner edge. There a nicks and chip on the edge and top there is a burned area on the rear left outer edge. There is generally some heavy darkening on the top. The stem on the other hand looks very good in the photos. I took photos of the stamping on the sides of the shank. The stamping is clear and readable as noted above. I took a photo of the pipe with the stem removed to show the overall look of stem, tenon and profile of the pipe.I decided to start my work on the pipe by addressing the darkening and damage on the rim top and edges of the top. I lightly topped the bowl to remove the damage on the top and the inner edge of the rim. It also helped with the damage to the outer edge as well. I used a folded piece of 220 grit sandpaper to work on the inner edge a bit more. It took work but I was able to remove the majority of it. There was still one spot of burn damage on the left rear outer edge but it was smaller than when I had started. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads and wiping the bowl down with a damp cloth after each pad. I stained the polished rim top with the lightest coloured stain pen I have – Oak and was able to blend it into the overall colour of the bowl. The rim top looked amazingly better than when I started and has some great grain that is parallel to that on the heel of the bowl.I rubbed the briar down with Before & After Restoration Balm. I worked it into the briar with my fingertips. The product works to clean, enliven and preserve the briar. I let it sit for 10 minutes while I worked on the stem. After the time passed I buffed it with a cotton cloth to deepen the shine. The briar really comes alive with the balm. I set the bowl aside and turned my attention to the stem. Because it was in such good condition I polished the vulcanite with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I decided to pause and go sit in the yard in the shade and enjoy a bowl of MacBarens HH Old Dark Fired in my Downie Pipe before I polished the Dunhill. Need a bit of a break!This uniquely stamped Dunhill Root Briar 251 Billiard is a piece of Dunhill’s Warranty History – made in 1957 and sold or exchanged in 1960 at least that is my call though others have seen it as made in 1967 and sold in 1970. It is a great looking pipe in spite of the remaining burn mark on the rim. The Light Brown stain highlights some great grain around the bowl sides and the heel. It has some of the most stunning birdseye grain I have seen in a while on the right side of the bowl. The finish on the pipe is in excellent condition and the stain works well to highlight the grain. The polished black vulcanite taper stem adds to the mix. With the grime and debris gone from the finish and the bowl it was a beauty and is eye-catching. I put the stem back on the bowl and buffed the pipe with Blue Diamond on the buffing wheel being careful to not buff the stamping. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing it with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished 251 Billiard is quite nice and feels great in the hand. Give the finished pipe a look in the photos below. I can only tell you that like the other pipes I am working that it is much prettier in person than the photos capture. The dimensions of the pipe are Length: 5 ¾ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. Thanks for walking through the restoration with me as I worked over another beautiful pipe. This pipe will be added to the British Pipe Makers section of the rebornpipes store soon. If you want to add it to your collection send me an email or a message! Thanks for your time.

Restoring a bit of an oddity – a Dri-Cool Briar Carburetor Rhodesian

Leave a reply

Blog by Steve Laug

The next pipe on the table came to us from one of Jeff’s pipe hunts or auctions. It is a strange pipe in many ways. The end of the stem is wrapped tightly with thread forming a protective bit cover to protect the stem from bite marks – or was it? Maybe it was a home down repair job and when we removed the thread we would see what was wrong. The other thing about the pipe is that it has a clip on the underside of the pipe with a patent number 2,166,172. Under the spring clip there was a Kaywoodie style carburetor in the bottom of the bowl. It extends up into the bowl bottom about1/4 of an inch. The post is split in the centre like a slotted screw. The airway enters the bowl at the base of the post. The rest of the shank and stem are normal. The bowl was very dirty with a thick cake in the bowl and a lava overflow on the rim top. There was a large chip out of the outer edge of the bowl at the front of the rim top. The stem was dirty but lightly oxidized. There are not any tooth marks on the stem. Jeff took photos of the pipe before he cleaned it up. Jeff took photos of the rim top to show the damage, the tick cake in the bowl and the lava overflow on the rim top. The photos show the rim top and bowl from various angles. Jeff took some photos of the bowl sides and heel to show the nice grain that was on this bowl. It is a quite beautifully grained pipe. Jeff took several photos of the apparatus on the heel of the bowl. You can see the clip like piece of metal with a patent number on it over the carburetor/nozzle extending out of the bowl. The stamping and logo are interesting on the left side of the shank. They include the Dri-Cool Briar stamp and a pipe that illustrates the system. On the right side of the shank it reads Aged Imported Briar. The previous pipeman had wrapped the end of the stem in twine/thread to provide a homemade bite protector. We have seen this before and generally what is underneath is a mess. However Jeff took photos of the unwrapping this time and what was underneath was quite pristine. Whew a good surprise! Before I started to work on the pipe I decided to hunt down the patent number on the clip on the heel of the bowl. I did a patent search on the US Patent Site and found the following Patent Information. For some reason one of the pages was not available on the site but I have included what was there along with the patent drawings. It appears that the concept was patented on December 30, 1936 by A.B. Modine. While the pictures are slightly different from the pipe I am working on the parts appear to be the same. It is an interesting piece of the perpetual and ongoing search for a cool and dry smoke. I also found a picture online of a Dri-Cool Briar The Thermostatic Control Billiard and have included below.Armed with that information I turned to work on the pipe itself. Jeff had done a great job cleaning up the pipe as usual. He reamed the pipe with a PipNet reamer and cut back the cake back to the bare briar. He cleaned up the walls with a Savinelli Fitsall Pipe Knife. He scrubbed the interior of the bowl and shank with pipe cleaners, cotton swabs and alcohol to remove the tars and oils. He scrubbed the exterior of the pipe with Murphy’s Oil Soap to remove the grime from the finish. He scrubbed the inside of the stem with alcohol and pipe cleaners. He scrubbed the exterior with Soft Scrub and then soaked it in Before & After Deoxidizer. He washed it off with warm water to remove the deoxidizer. The pipe looked far better. I took photos of the pipe when I received it before I started working on it. I took photos of the bowl and rim top to show how clean it was. You can see the darkening on the rim top and the apparatus in the bottom of the bowl. The chip out of the outer edge of the rim is visible and deep.I took a photo of the clip on the underside of the shank to show the Patent Number. Jeff was able to clean up around the clip as well and it looked very good. I took photos of the stamping on both sides of the shank. It is clear and readable.I cleaned up the damage on the rim top and filled in the chip on the edge with briar dust and super glue. Once the chip repair cured I sanded it smooth and sanded the damaged rim top smooth with 220 grit sandpaper. I polished it with 400 grit wet dry sandpaper. I polished the briar with micromesh sanding pads – wet sanding with 1500-12000 pads and wiping the surface down with a damp cloth to remove the sanding debris. It began to really shine as I worked through the various grit pads. I used a blend of Cherry and Maple stain pens to restain the rim top and blend it into the rest of the briar. Once it polished the colour will blend together with the rest of the briar.Once the stain cured I rubbed the briar down with Before & After Restoration Balm. I worked it into the briar with my fingertips. The product works to clean, enliven and preserve the briar. I let it sit for 10 minutes while I worked on the stem. After the time passed I buffed it with a cotton cloth to deepen the shine. I set the bowl aside and turned my attention to the stem. I polished the vulcanite with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This was a fun pipe to work on. The “plumbing” on it made it quite fascinating to clean up and to restore. It seems to me that it functions a lot like a Kaywoodie Carburetor but externally is different. I wonder if the clip is not a way of regulating the airflow from the Carburetor in the bowl bottom. Anyway, I put the pipe back together again and buffed it with Blue Diamond on the buffing wheel. I gave the bowl and stem several coats of carnauba wax. I buffed the pipe on the wheel with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. I am really happy with how the pipe came out and the way in which the rim edge repair blended in with the rest of the bowl. The browns of the stain and the black of the polished vulcanite came out really well. This is a nice looking “contraption” pipe versus how often they are quite ugly! The dimensions of the pipe are Length: 5 ¾ inches, Height: 1 ¾ inches, Outer Diameter of the Bowl: 1 ¼ inches, Chamber Diameter: ¾ of an inch. The finished pipe is shown in the photos below. It is an interesting pipe and one that will reside in my “Search for a Cooler/Drier Smoking Pipe” Collection. Give the blog a read. Thanks for walking through the restoration with me.

A Fresh Start for the second Davidoff from this estate – a Straight 214 Billiard

Leave a reply

Blog by Steve Laug

One thing about having so many boxes of pipes to work on surrounding my work table is that I can always find one that grabs my attention to work on now! This is the second of the two Davidoff pipes in the box and I had passed over in the past weeks but this morning I decided that the second pipe would join the days queue. It is a nice looking Billiard shape pipe stamped Davidoff on the left side of the shank. The name is underlined and the D has a flourish both on the stamping and on the logo on the left side of the stem. On the right side it is stamped with the shape number 214. It was dirty and was another well-loved pipe when we received it. The bowl had a thick cake and the lava overflow on the top and the edge of the rim. It was hard to know the condition of the inner edge of the bowl. The pipe had a rich Mahogany stain on the bowl that highlighted some nice grain on the bowl sides under the grime and the finish appeared to be damaged on the left side of the shank and rim top. The shiny varnish coat was damaged on the rim, on the right side of the bowl and the left side of the shank. It was worn. A lot would be revealed once Jeff had worked his magic on it. The acrylic stem was in good condition with light tooth chatter and marks on both sides ahead of the button and on the button surface itself. Jeff took photos of the pipe before he started his cleanup work. Jeff tried to capture the condition of the bowl and rim top with the next series of photos. You can see the work that is ahead of us there. The grain around the bowl is quite stunning. Jeff took some great photos showing what is underneath the grime and debris of time and use. He captured the stamping on both sides of the shank and both sides of the half saddle acrylic stem. They are clear and readable. It read Davidoff in script underlined with a Script D on the left side of the stem and Hand Cut on the right side of the stem. The photos of the stem show the stem surface. It is dirty and has light tooth marks and chatter on both sides ahead of the button.This second Davidoff pipe is also the second one I have worked on from this pipe maker. I turned to Pipephil to get a quick overview on the brand so I knew a bit about the pipe I was working on (http://www.pipephil.eu/logos/en/logo-d3.html). I have included a screen capture of the pertinent section below. It seems that for awhile anyway the pipes were carved by the Cuty-Fort Group (Chacom, Jeantet, etc.).I turned to Pipedia to fill in more of the gaps and found that the article quotes Jose Manuel Lopes whose book I have on my shelf ( https://pipedia.org/wiki/Davidoff) I quote:

From Pipes, Artisans and Trademarks, by Jose Manuel Lopés’

Davidoff started in 1911 as a family run tobacconist located in Geneva. Henri Davidoff, a Russian emigrant, was the founder. The shop was located in Geneva. His son, Zino Davidoff (1906-1994), concentrated on the tobacco business, starting in 1924, and revolutionized the conservation of quality cheroots throughout Europe.

Davidoff became World famous, and the company was acquired in 1970 by the Oettinger group, and expanded into numerous accessories for men. For Zino, the pursuit of pleasure was a constant, two of his maxims being: “Take pleasure from everything in life, without excess” and “the pipe is a valuable companion, the essence of tranquility and must be smoked with respect”.

Davidoff’s first pipes date from 1974 and were commissioned by various companies, notably Butz-Choquin and the Cuty Fort Group. The brand offers 14 classic shapes, in three finishes and with acrylic stems.

It appears the pipes are now made in Italy, as the website states the following about their pipes:

Creation of the Davidoff Pipe entails a meticulous, detailed process performed by only the most skilled Italian pipemakers. This dedication is why the Davidoff Pipe upholds a standard of quality and design found in no other pipe in the world. Made of the finest and carefully selected briar, each Davidoff Pipe features a flawless, hand-finished bowl and perfectly fitted, hand-cut acrylic stem. The Davidoff Pipe is available in three beautiful designs and finishes — sandblasted black, red brilliant and natural light brown.

With that information in hand I knew what I was dealing with either a French made or an Italian made pipe. I have been working on a lot of each lately and the pipe in hand also had the feel of a French made Chacom pipe rather than an Italian. I would work with that assumption. I had no idea of the age of the pipe but it was time to work on the pipe itself.

Jeff cleaned the pipe with his usual penchant for thoroughness that I really appreciate. This one was a real mess and I did not know what to expect when I unwrapped it from his box. He reamed it with a PipNet pipe reamer and cleaned up the reaming with a Savinelli Fitsall Pipe Knife. He scrubbed out the internals with alcohol, pipe cleaners and cotton swabs until the pipe was clean. He scrubbed the exterior of the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and grit on the briar and the lava on the rim top. The finish looks very good with good looking grain around the bowl and shank. Jeff scrubbed the stem with Soft Scrub to remove the grime and build up on the surface. When the pipe arrived here in Vancouver for the second stop of its restoration tour it looked very good. I took photos before I started my part of the work. (I forgot to take a photo of the top view of the pipe.) Fortunately I took some photos of the rim top and stem. The photo of the bowl shows how clean the bowl is and also the damage and peeling of the varnish coat on the smooth rim. The inner edge of the bowl was also in rough condition with burn marks and damage around the front inner edge. The close up photos of the stem shows that is it very clean.I took photos of the stamping on the stem and shank of the pipe. It is clear and readable. You can also see the smudge in the varnish finish on the left side of the shank in the middle of the Davidoff stamp.I took the stem off the shank and took a picture of the pipe. It really is a nice looking pipe with great lines.With the damage on the finish on the side of the shank and the finish on the rim top I decided to remove the varnish or shellac coat on the briar. I wiped it down with acetone on a cotton pad to remove the shiny coat. I would need to sand the rest of the finish off with micromesh sanding pads but before I did I wanted to clean up the edge and top of the rim. I used a folded piece of 220 grit sandpaper to smooth out the damage and give the rim edge a light bevel. I topped the rim with 220 grit sandpaper to remove the damaged finish and clean it up. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad with a damp cloth. I wanted to finish removing the varnish coat and polish the rim top. Once the varnish was removed the grain really began to stand out and the finish took on a natural shine by the last sanding pad. The photos tell the story! (Once again I forgot to take a few photos — don’t know what is happening.) I stained the polished rim top with a Mahogany Stain Pen. The colour matched the rest of the bowl perfectly. There was still a small nick in the rim edge that remains – to remove that would have changed the look of the rim.I worked some Before & After Restoration Balm into the surface of the briar with my fingertips. The product works to clean, enliven and protect the briar. I let the balm sit for about ten minutes and then buffed with a cotton cloth to raise the shine. The photos show the bowl at this point in the restoration process. I laid the bowl aside and turned to deal with the stem. The tooth marks and chatter on the stem were not deep. I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with a cloth containing some Obsidian Oil. I finished polishing it with Before & After Pipe Stem Polish – both Fine and Extra Fine and buffed it off with a cotton cloth. The pipe came together quite well. The finish on the pipe is in excellent condition and the contrasting stains work well with the black acrylic stem. With the grime, debris and varnish coat gone, the bowl had a natural beauty and grain that pops. I put the stem back on the bowl and buffed the pipe with Blue Diamond on the buffing wheel. I carefully avoided the stamping on the shank and stem during the process. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing it with a clean buffing pad on the buffer. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Davidoff pipe is quite beautiful and is a lovely billiard shaped pipe. The finish on the bowl combines various mahogany and black stains to give it depth. It is very well done. Give the finished pipe a look in the photos below. I can only tell you that it is much prettier in person than the photos capture. The dimensions of the pipe are Length: 5 ½ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. I really like this billiard shaped pipe and it also reminds me of a Chacom pipe. This is a great looking pipe in great condition. Thanks for walking through the restoration with me as I worked over another beautiful pipe. I will be adding it to the rebornpipes store soon. If you want to add it to your collection send me an email or a message! Thanks for your time.

New Life for a Danish Hand Made Prince Amled 4 Peewit Shape

1 Reply

Blog by Steve Laug

This past January Jeff and his wife Sherry and Irene and I made a pipe hunting trip down the Oregon Coast. At least that is what Jeff and I called it. We stopped in a lot of the small towns up and down the northern part of the coast and picked up some nice pipes. This little pipe was obviously Danish and I think both Jeff and I thought it was a Kriswill. We were hooked so we picked it up and added it to the finds of the trip. This pipe is stamped on the left side of the shank and on the underside at the shank/stem union. On the left side it is stamped with Prince Amled over Danish Hand Made. On the underside it is stamped with the shape number 4. Next to the 4 there was a chip in the shank end. It was a very dirty pipe with a dull and lifeless finish but it was the shape that caught our eye. We were hoping for some nice grain around the bowl. There was a very thick cake in the bowl and a thick lava coat on the rim top and the inner edge. It was hard to see what the condition of either the inner or outer edges with the lava and grime. It did appear that there was a burned area on the right side of the outer edge. The pipe had a rich medium brown stain with a reddish tint that was meant to highlight the grain on the bowl sides. A lot would be revealed once Jeff had worked his magic on it. The pencil shank and pencil flared saddle stem was heavily oxidized and calcified. There was light tooth chatter and marks on both sides ahead of the button and on the button surface itself. Jeff took photos of the pipe before he started his cleanup work. Jeff has gotten very good at capturing the condition of the bowl and rim top with his photos. You can see the work that is ahead of us in terms of the lava and grime on the rim and the thick cake in the bowl. This pipe is a real mess.The next set of photos show the grain on the sides and heel of the bowl. It is an interesting combination of grain – cross grain, swirls and birdseye predominate. I look forward to seeing what this one looks like once it is clean and restored. He took photos of the faint stamping on the sides of the shank. The Prince Amled stamp on the left side is readable. On the underside is the shape stamp 4 which is very clear readable. The third photo below shows the crown logon on the left side of the saddle stem. The next photos show the stem surface. It was very dirty, oxidized and calcified. It had pitting, light tooth marks and chatter on both sides ahead of the button. Before I started to work on the pipe I wanted to learn about the brand. I turned first to Pipephils site to see if there was any information on the Danish Made Prince Amled brand (http://www.pipephil.eu/logos/en/logo-p5.html). I did a screen capture of what was on the site and I include that below. It was another of those pipes with little information included.I turned to Pipedia see if there was any further information to help me with hunt for this pipe manufacturer. The listing for that pipe company had some great photos but also an appeal for information on the brand. It looks like I had as much information as I could find online.

Now it was time to work on the pipe itself. Jeff had once again outdone himself on this pipe. It looked far better than what it was like when we found it. We were right in our assumption of nice grain under the grime. He reamed the bowl with a PipNet Pipe reamer and took the cake back to bare briar. He cleaned up the bowl walls with a Savinelli Fitsall Pipe Knife. He scrubbed out the internals with alcohol, pipe cleaners and cotton swabs until the pipe was clean. He scrubbed the exterior of the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and grit on the briar and the lava on the beveled rim top. The finish looks very good with good looking grain around the bowl and shank. Jeff scrubbed the stem with Soft Scrub and then soaked it in Before & After Deoxidizer to remove the oxidation on the vulcanite. When the pipe arrived here in Vancouver for the second stop of its restoration tour it looked very good. I took photos before I started my part of the work. I took some photos of the inwardly beveled rim top and stem. Once Jeff removed the lava on the top and inside of the rim top was rough. Both the inner and the outer edge of the bowl showed damage. There a lot of darkening on the inside edge and burn damage on the top right outer edge. The close up photos of the stem shows that is it very clean and there is some tooth chatter and marks on the button surface and just ahead of the button.I took the stem off the bowl and took a picture of the pipe. It really is a pretty little pipe with a classic Danish look to it.I decided to begin my work on the pipe by addressing the damage on the rim top and edges. The rim was beveled inward so topping it on a topping board was out of the question. I used a folded piece of 220 grit sandpaper to smooth out the inner and outer edges of the bowl. I also used it to smooth out the rim top to remove the damage.In the photos that Jeff took of the underside of the shank you can see a chip or large nick on the shank. It is almost like someone tried to pry off the stem. It needed to be cleaned up and repaired. I have included that photo as the first one below. One of the perks that I have found from Jeff’s cleanup methods as nicks like this will often swell and either disappear or be greatly reduced. The second photo shows the same area after his cleanup work. I used a folded piece of 220 grit sandpaper to smooth out the remaining damage on the shank (picture 3) and then took a photo of the clean shank end (picture 4). I was happy with the way the rim top and edges looked so I did not need to do anymore except to polish them. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad with a damp cloth. The grain really began to stand out and the finish took on a shine by the last sanding pad. The photos tell the story! I touched up the rim top to match the rest of the bowl with a blend of Oak and Maple stain pens. The blend works really well with this colour of bowl. I am happy with the work so it is time to move on.I worked some Before & After Restoration Balm into the surface of the briar with my fingertips. The product works to clean, enliven and protect the briar. I let the balm sit for about ten minutes and then buffed with a cotton cloth to raise the shine. The photos show the bowl at this point in the restoration process. I set the bowl aside at this point and turned my attention to the stem. The stem was in very good condition. I decided to apply some Antique Gold Rub’n Buff to the logo on the side of the saddle stem. I rubbed it on and buffed it off and it looks good.I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with a cloth containing some Obsidian Oil. I finished polishing it with Before & After Pipe Stem Polish – both Fine and Extra Fine and buffed it off with a cotton cloth. This delicate and petite Prince Amled Hand Made Danish pipe is a real beauty. I know it is hand made in Denmark but that is the extent of the information available on the brand. The shaping and carving follows the grain and highlights the mix of grains around the bowl. The finish on the pipe is in excellent condition and the contrasting stains work well to highlight the stunning grain on the pipe. The thin vulcanite pencil saddle stem adds to the mix. With the grime and debris gone from the finish and the bowl it was a beauty and the grain just pops at this point. The rim top looks really good now. I put the stem back on the bowl and buffed the pipe with Blue Diamond on the buffing wheel. I carefully avoided the stamping on the shank and stem during the process. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing it with a clean buffing pad on the buffer. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished “Peewit” shape (at least that is what I am calling it) is quite nice and feels great in the hand. Give the finished pipe a look in the photos below. I can only tell you that like the other pipes I am working that it is much prettier in person than the photos capture. The dimensions of the pipe are Length: 5 inches, Height: 2 ¼ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: 5/8 of an inch. Thanks for walking through the restoration with me as I worked over another interesting pipe. This pipe will be added to the Danish Pipe Makers section of the rebornpipes store soon. If you want to add it to your collection send me an email or a message! Thanks for your time.

Breathing Life into A Pipe Maker 16 Lovat with a Cumberland Stem

4 Replies

Blog by Steve Laug

This past January Jeff and his wife Sherry and Irene and I made a pipe hunting trip down the Oregon Coast. At least that is what Jeff and I called it. We stopped in a lot of the small towns up and down the northern part of the coast and picked up some nice pipes. When I saw this little Lovat with a Cumberland stem I was hooked and we picked it up and added it to the finds of the trip. This pipe is stamped on both sides of the shank and on the underside at the shank/stem union. On the left side it is stamped with the Pipe Maker. On the right side it is stamped Imported Briar. On the underside it is stamped with the shape number 16. It was a very dirty pipe with a dull and lifeless finish that hid the grain around the bowl. There was a very thick cake in the bowl and a thick lava coat on the rim top and the inner edge. It was hard to see what the condition of either the inner or outer edges with the lava and grime. The pipe had a rich medium brown stain with a reddish tint that highlighted nice grain on the bowl sides under the grime and the finish appeared to be in good condition. A lot would be revealed once Jeff had worked his magic on it. The Cumberland style saddle stem was in good condition with oxidation and light tooth chatter and marks on both sides ahead of the button and on the button surface itself. Jeff took photos of the pipe before he started his cleanup work. Jeff has gotten very good at capturing the condition of the bowl and rim top with his photos. You can see the work that is ahead of us in terms of the lava and grime on the rim and the cake in the bowl. This pipe is a real mess. The next set of photos show the grain on the sides and heel of the bowl. It is an interesting combination of grain – cross grain and birdseye predominate. I look forward to seeing what this one looks like once it is clean and restored. He took photos of the faint stamping on the sides of the shank. The Pipe Maker stamp on the left side is faint but readable. The Imported Briar stamp on the right side is also faint but readable. On the underside is the shape stamp 16 which is very clear readable. The fourth and fifth photos below show the logo on the left side of the saddle stem. The next photos show the stem surface. It was very dirty, oxidized and calcified. It had pitting, light tooth marks and chatter on both sides ahead of the button. Jeff removed the stem from the shank and the photo shows the interesting stinger apparatus and threaded tenon on the pipe. I was certain that the brand was American because of the Imported Briar stamp on the shank but I wanted to learn more about it. I turned first to Pipephils site to see if there was any information on the brand (http://www.pipephil.eu/logos/en/logo-p3.html). I did a screen capture of what was on the site and I include that below.I turned to Pipedia see if there was any further information to help me with hunt for this pipe manufacturer. There was no listing for that pipe company so I had as much information as I could find online.

Now it was time to work on the pipe itself. Jeff had cleaned the pipe with his usual penchant for thoroughness that I really appreciate. It looked far better than what it was like when we found it. He reamed the bowl with a PipNet Pipe reamer and took the cake back to bare briar. He cleaned up the bowl walls with a Savinelli Fitsall Pipe Knife. He scrubbed out the internals with alcohol, pipe cleaners and cotton swabs until the pipe was clean. He scrubbed the exterior of the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and grit on the briar and the lava on the beveled rim top. The finish looks very good with good looking grain around the bowl and shank. Jeff scrubbed the stem with Soft Scrub and then soaked it in Before & After Deoxidizer to remove the oxidation on the Cumberland style rubber. When the pipe arrived here in Vancouver for the second stop of its restoration tour it looked very good. I took photos before I started my part of the work. I took some photos of the rim top and stem. Once Jeff removed the lava on the top and inside of the rim top was a wreck. Both the inner and the outer edge of the bowl showed damage. There were deep nicks and gouges to the surface of the rim and a lot of darkening. The close up photos of the stem shows that is it very clean and there is some tooth chatter and marks on the button surface and just ahead of the button.I removed the stem from the bowl and worked on the rim surface. The rim was beveled so topping it on a topping board was out of the question. I used a folded piece of 220 grit sandpaper to smooth out the inner and outer edges of the bowl. I also used it to smooth out the rim top to remove the damage.I was happy with the way the rim top and edges looked so I did not need to do anymore except to polish them. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad with a damp cloth. The grain really began to stand out and the finish took on a shine by the last sanding pad. The photos tell the story! I touched up the rim top to match the rest of the bowl with a blend of Maple and Cherry stain pens. The blend works really well with this colour of bowl. I am happy with the work so it is time to move on.I worked some Before & After Restoration Balm into the surface of the briar with my fingertips. The product works to clean, enliven and protect the briar. I let the balm sit for about ten minutes and then buffed with a cotton cloth to raise the shine. The photos show the bowl at this point in the restoration process. I set the bowl aside at this point and turned my attention to the stem. I filled in the tooth marks on the button edge and along the edge on both sides with clear super glue. When the repairs had cured I used a needle file to recut and sharpen the edges of the button and the button surface. I paused in my work on the stem to realign the stem in the shank. I heated the tenon with a lighter to soften the glue that holds it in place. I screwed the stem back in the mortise and aligned it while the glue was soft. Once it had set I removed the stem and continued to work on it.I blended the repairs into the surface of the stem and reshaped the button with 220 grit sandpaper and started the polishing with 400 grit wet dry sandpaper.I continued the polishing using Denicare Mouthpiece polish. It is a red gritty paste that feels a lot like Tripoli to me. It works very well to polish out remnants of oxidation and smooth out fine scratches in the rubber stem.I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with a cloth containing some Obsidian Oil. I finished polishing it with Before & After Pipe Stem Polish – both Fine and Extra Fine and buffed it off with a cotton cloth. This small Pipe Maker American Made Lovat is a bit of a mystery. I know that Frankau made them in England and Pipe Maker made them in the US but that is the extent of the information available on the brand. The shaping and carving follows the grain and highlights the mix of grains around the bowl. The finish on the pipe is in excellent condition and the contrasting stains work well to highlight the stunning grain on the pipe. The Cumberland saddle stem adds its reds to the mix. With the grime and debris gone from the finish and the bowl it was a beauty and the grain just pops at this point. I put the stem back on the bowl and buffed the pipe with Blue Diamond on the buffing wheel. I carefully avoided the stamping on the shank and stem during the process. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing it with a clean buffing pad on the buffer. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Lovat is quite nice and feels great in the hand. Give the finished pipe a look in the photos below. I can only tell you that it is much prettier in person than the photos capture. The dimensions of the pipe are Length: 5 ¼ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. Thanks for walking through the restoration with me as I worked over another interesting pipe. This pipe will be added to the American Pipe Makers section of the rebornpipes store soon. If you want to add it to your collection send me an email or a message! Thanks for your time.

A New Lease On Life For A No-Name English Make Large Pot

Leave a reply

Blog by Paresh Deshpande

I had purchased this pipe lot of two unmarked beautiful looking pots on eBay with the intention of either selling or gifting. The price was very low and from the pictures, the pipes screamed quality and appeared solid. Here are a couple of pictures of this pair that were posted by the seller. Once the pipes were delivered home (my work place is away from where my family resides), Abha my wife, checked them out and informed me of the following;

(a) Both pipes are similar with only difference being in the size, one is large Pot while the other is a medium.

(b) The only stamping seen is on the right side of the shank and reads “MADE IN” over “LONDON, ENGLAND”. The stem is devoid of any stampings. The overall feel of the pipe is that of high quality.

(c) Both pipes have a darkened spot each, the larger one has it on the heel and the other on the bottom left side of the stummel.

The last piece of information was something that troubled me. I had seen a dark spot on the heel of one pipe, but it appeared to be a smear of grime and dirt. Here are the pictures of the spots that Abha had sent me. It definitely appeared to be the beginnings of a burn out!!Truth is, after the initial surprise of being misinformed by the seller on eBay had subsided, I did not find these damages very alarming and I felt that these two beauties still had many years of smoke left in them with some minor repairs. The matter rested till I received about 40 pipes that Abha had sent me duly cleaned for my part of refurbishing. Both these pipes were part of that parcel that I had received.

I decided to work on the larger pot first. The pipe has a beautiful mix of swirls and cross grains. In fact, the USP of the stummel lies in the solid hand feel and robustness of the build. The quality of briar is top notch and without any fills at all on this piece. It is stamped on the right side of the shank as “MADE IN” over “LONDON, ENGLAND”. The high quality vulcanite saddle stem is sans any stampings.There are not very many clues that can point me towards the provenance of this pipe. The only fact that can be established is that this is a London made pipe. The build quality, the shape and stem type reminds me a lot of Charatan’s pipe, most notably their Belvedere line. In fact, I do have a Charatan’s Make BELVEDERE pot shaped pipe that I had received as part of my Mumbai Bonanza and the similarities are striking. Also, while surfing the net, I came across a MOUNTBATTEN pot which again resembled the pipe on my work table. Here are pictures of both these pipes, the first two are of the Mountbatten and the next two are that of Belvedere pot. With Mountbatten being a Charatan’s second and observing the similarities between these three pipes, it may be surmised that there is a possibility that the pipe presently on my work table is made by Charatan’s for some pipe shop, which was not uncommon in the past. Any confirmed input to either support or refute my assumption is most welcome.

Initial Visual Inspection
The chamber has a thick even layer of cake with heavy lava overflow over the inward sloping rim top surface. The deposition of heavy lava overflow is predominantly seen on the backside of the rim surface in 6 ‘O’ clock direction. A number of dents and dings are seen on both outer and inner rim edges. I suspect charring to the inner rim edge in 1 ‘O’ clock and likely in the 6 ‘O’ clock direction. The extent of the charring and the condition of the walls of the chamber can be ascertained only once the cake has been taken down to the bare briar. The foot of the stummel did show the sign of beginnings of a burn out that was considerably darker towards the draught hole (encircled in green) and extending outwards away from the draught hole half way across the foot. The damage to the heel and the resulting severity of the burn out will be confirmed after reaming. There are some very strong ghost smells to the chamber which will need to be addressed. The stummel is covered in oils, dust and grime giving it a dull and lackluster appearance. The stummel feels solid and well carved and nice mixed grains can be observed all over the surface through all the grime. There is not a single fill anywhere on the bowl. Other than the charring observed at the foot of the stummel, the stummel has a robust and solid feel. The mortise is cleaned and clogged with the accumulation of old and dried oils, tars and gunk. This will need to be cleaned. The vulcanite saddle stem is heavily oxidized with signs of calcification on either surface of the stem about an inch from the button edges. There is no serious tooth chatter or indentation or button damage to the stem. The tenon end and horizontal slot shows signs of accumulation of old oils, tars and gunk. The high quality vulcanite stem should clean up nicely.Initial Cleaning By Abha…
The initial cleaning on this pipe was done by Abha, my wife (she has cleaned up around 40-50 pipes and these have now reached me for further restoration). She reamed out the complete cake and further smoothed out the chamber walls with a folded piece of 220 grit sand paper. She further cleaned out the internals of the shank with pipe cleaners and alcohol and cotton buds. She followed the internal cleaning of the shank with external cleaning of the stummel using Murphy’s Oil soap and hard bristled tooth brush and dried it with paper napkins and cotton cloth.

Next she cleaned out the internals of the stem air way and immersed it in “Before and After Deoxidizer” solution along with the stem of the other pot in line for restoration. Once the stem had soaked overnight, she cleaned the stem under running warm water and scrubbed the raised oxidation from the stem surface using Scotch Brite pad. She further removed the oxidation by scrubbing the stem with 0000 grade steel wool and applied a little olive oil to rehydrate the stem.Once The Pipe Is On My Work Table…
Now that the cleaned pipe is on my work table, I proceed to carry out my appreciation of the work that needs to be done on this pipe to restore it. The cleaned up pipe presented a clearer picture about the actual condition and the work required on this pipe. Here is how the pipe reached me. The stummel was clean and free of any accumulated grime. As observed earlier, there is not a single fill anywhere on the stummel. The only cause of concern is the darkened spot over the foot of the stummel. I felt the spot for softness with my nail and it appeared sufficiently solid, thus confirming that it’s not an all out burned heel. Rest of the stummel feels solid and robust to the touch. This piece of briar should polish up nicely. I was eager to understand the extent of burn out in the heel of the bowl. True enough, I could make out a dark patch just in front of the draught hole approximately at the center of the heel (marked in yellow). The chamber shows a few vertical minor heat lines all along the front of the walls emanating from the dark patch and further branching out horizontally to either side. The entire heel of the bowl appears dark and when seen in conjunction with the foot darkening, this issue needs to be investigated and addressed. The inward sloping rim top surface is in decent condition with the inner rim edge showing slight deformation and darkening in 6 o’clock and 1 o’clock direction (circled in red). The outer rim edge show few dents and dings. Thus, I would need to address issues of the darkened heel, inner rim edge and dents and dings to the outer rim edge. The mortise and shank is nice and clean. The ghost smells are history and reflects the thoroughness with which Abha cleans the internal and external of the pipe.The stem had cleaned up nicely and is in pristine condition. Whatever, little oxidation remains, will need to be removed by sanding with a folded piece of 220 grit sand paper and follow it up with polishing with micromesh pads. The Process
The first issue on the agenda that I decided to tackle was to address the dark patch to the heel observed just in front of the draught hole and correspondingly to the foot of the stummel. The black patch is bounded by the yellow arrows and the alignment of the web of these minor heat fissures is indicated by the green arrows. With a pointed dental tool, I scraped the black patch in the heel of the chamber and completely removed the dead charred briar from the surface till I reached solid intact briar. Thereafter, I removed the charred briar from the heat fissures till I had reached solid briar. Once the dead and charred briar was removed, there was a need to give a protective coat over the surface to avoid direct contact of the briar with the burning tobacco as the thickness from these damaged areas were slightly reduced. I would achieve this by coating the walls of the chamber with J B Weld mix. I preceded the stummel repairs first by coating the walls of the chamber with a slightly thick layer of J B Weld. J B Weld is a two-part epoxy Cold Weld in two tubes; hardener and steel which are mixed in two equal parts (ratio of 1:1) with hardening time of 5-6 minutes and complete curing time of 6-8 hours. I poured the contents of the two tubes and mixed it well. I inserted a petroleum jelly coated regular pipe cleaner through the draught hole to prevent it from getting blocked due to the J B Weld mix. I applied this mix, as evenly as possible, over the entire chamber wall surface. I worked fast to ensure an even coat over the chamber walls before the weld could harden. I set the stummel aside for the application to harden and cure overnight.While the J B Weld coat was curing, I worked the stem by first sanding it down with a folded piece of 220 grit sand paper. This step addresses the twin issues of removing residual stubborn oxidation and also smooth out the minor tooth chatter from the bite zone. I wiped the stem with Murphy’s Oil soap and cotton swab to remove the resulting sanding dust. I rubbed in a small quantity of EVO in to the stem and set it aside to rehydrate.Turning my attention back to the stummel, I sand the entire stummel surface with a folded piece of 220 grit sand paper to remove the minor dents and dings from the surface. This also helped to lighten the darkened spot from the foot of the stummel. Staying with the stummel repairs, the next issue I addressed was that of the damage to the rim top surface. The rim top surface is sloping inwards, making topping impossible without compromising the profile integrity. To address the issue of darkened rim surface, I sand it with a folded piece of 220 grit sand paper pinched between my thumb and fore finger, moving along in the direction of the surface profile. Simultaneously, I addressed the issue of charred inner rim edge and the dings and chips to the outer edge, by creating a slight bevel to both the rim edges. I am happy with the appearance of the stummel at this stage. I switch back to the stem and further sand it with 400, 600 and 800 grit sand paper. I wiped the stem with cotton pad dipped in alcohol to remove the resultant dust. I rubbed some extra virgin olive oil into the stem and set it aside to be absorbed. I polished the stem with micromesh pads, wet sanding with 1500 to 12000 grit pads. I rubbed a little extra virgin olive oil in to the stem at the end of all the micromesh pads. I finished the polishing of the stem by rubbing a small quantity of Paragon wax and giving it a final polish with a soft cotton cloth. The stem is now nice, smooth and shiny. With the stem polishing completed, I moved ahead with completing the stummel repairs. The J B Weld coat had hardened considerably by this time. I mount a sanding drum on to my hand held rotary tool and setting the speed to half of the full RPM, I sanded the excess coat from the chamber walls. To further fine tuned and keep the coat to a minimum thickness, I further sanded the coat with a 150 grit sand paper till I had a coat of a thickness that was just sufficient to protect the briar underneath. Here is how the chamber appeared at this stage. I polished the stummel with micromesh pads, wet sanding with 1500 to 12000 pads. I wiped the surface with a soft cloth at the end of the micromesh cycle. The stummel looks amazing with a deep shine and beautiful grains popping over the stummel surface. However, the dark rim surfaces in 1 o’clock direction and the dark spot at the foot of the stummel do not present a visually appealing picture. I had the option of either masking them under a darker stain or to let them be. I shall decide after I am done with polishing with Blue Diamond, hoping that this would further lighten these spots. I followed up the polishing by applying “Before and After Restoration” balm. This balm protects and enriches the briar surface and is highly recommended for use in any restoration of briar pipe. I rubbed it deep in to the stummel surface and set it aside to be absorbed for 20 minutes. I was pleased by the appearance of the stummel, less the dark spots on the rim edge and on the foot of the stummel. I mounted a cotton cloth buffing wheel on to my hand held rotary tool and applied a coat of Blue Diamond to the stummel, hoping to see a slight change in the appearance of the dark spots. However, these spots are still prominent and will need to be masked. Here are the pics of the pipe at this stage. I decided to stain the stummel with a Cordovan stain in the hope that it would help in a nice blending of the dark spots with the rest of the stummel. I heated the stummel surface with my heat gun to open up the pores on the stummel so that the stain is well set. I dipped a folded pipe cleaner in Fiebing’s Cordovan leather dye and liberally applied it over the heated surface, flaming it with the flame of a lighter as I went ahead to different self designated zones of the surface. This helps in even application and in the setting of the stain in the grain of the briar. I set the stummel aside for the stain to set into the briar. The next afternoon, I mounted a felt cloth buffing wheel on to my hand held rotary tool and using Red Tripoli proceeded, as my dear friend Dal Stanton likes to say “unwrap the coat of stain to reveal the grain” from the stummel surface. I set the tool at its slowest speed, again my recent experience while working on Steve’s pipe came in handy and the damage that can be caused due to heating while using the felt buffing wheel still fresh in my memory; I began to peel off the stain from the stummel surface first. The stain peeled out gradually. This was followed with wiping the stummel with a cotton swab and alcohol to lighten the stain a little as it was too dark for my liking. This also helped in cleaning the surface of all the residual stain and highlighting the grains. I set the stain by again heating the stummel surface with the heat gun. This is an essential step as, if missed, there is a possibility of the stain running down the hands of the smoker who decides to carry forward the trust in this pipe. To apply the finishing touches, I mounted a cotton cloth buffing wheel on to my hand held rotary tool and applied a coat of Blue Diamond to the stummel and the stem to polish out the minor scratches. Next, I mounted a cotton cloth buffing wheel and setting the speed to ¼ of the full power, I applied a thick coat of carnauba wax over the stummel and the stem. I worked the complete pipe till the time all the wax was absorbed by the briar. The pipe now boasted of a beautiful and lustrous shine. I vigorously rubbed the pipe with a microfiber cloth to deepen the shine and also to clean away any residual wax that had been left behind. I am very happy with the way this beauty has turned out. P.S. There was only one more issue that needed to be addressed and one that could not be ignored, being a functional issue. After I had protected the heel of the stummel and the walls of the chamber with a coat of J B Weld, it was necessary to prevent this coat from coming in to contact with the burning tobacco. I addressed this by mixing activated charcoal and plain yogurt to a thicker consistency, just enough that it would spread easily and applied it evenly all along the chamber walls after inserting a folded pipe cleaner through the draught hole to keep it open. Once dry and set, this will not only protect the walls but also aid in faster buildup of cake.I wish to thank all readers for sparing their valuable time to read through this write up.

Refitting the stem and restoring a Savinelli Made Rectangular Shank Billiard

Leave a reply

Blog by Steve Laug

The next pipe on the table is a different looking Savinelli made Billiard. It had a flat shank and stem that are rectangular. It was functionally a sitter. It was a different looking piece of briar in that it is a mix of grains hidden beneath the dirt. There was one fill on the shank bowl junction on the right side of the bowl. The briar was very dirty. The bowl had a thick cake overflowing like lava onto the bevel of the rim top. It is hard to know what the inner edge of the rim looks like because it is buried under the cake and lava coat. The fit of the stem in the shank appeared to be a bit off but cleaning would make that clear. The variegated brown and gold acrylic stem was dirty, scratched and had some light tooth marks and chatter at the button. Jeff took photos of the pipe before his cleanup work. The next photos capture the condition of the bowl and rim top. You can see the work that is ahead of us in terms of cake and lava buildup.The grain around the bowl is a mix of cross grain and birdseye. The pipe follows the grain well. Jeff took photos to show how the grain is laid out. The stamping on the underside of the shank read as noted above. You can also see that the stem is poorly fit to the shank in this photo.The photos of the stem show the stem surface. The first photo shows the fit of the stem against the shank. It was a poorly fit stem. The stem has light tooth marks and chatter on both sides ahead of the button. Now it was time to work on my part of the restoration of the pipe. Jeff had cleaned the pipe with his usual penchant for thoroughness that I really appreciate. This one was in decent condition with a bit of buildup on the rim top but virtually no cake in the bowl. He reamed the bowl with a Pipnet Reamer and then cleaned up the bowl walls with a Savinelli Fitsall Pipe Knife. He scrubbed out the internals with alcohol, pipe cleaners and cotton swabs until the pipe was clean. He scrubbed the exterior of the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and grit on the briar and the lava on the beveled rim top. The finish looks very good with good looking grain around the bowl and shank. There is one fill on the right side at the shank bowl junction. Jeff scrubbed the stem with Soft Scrub to remove the grime. When the pipe arrived here in Vancouver for the second stop of its restoration tour it looked very good. I took photos before I started my part of the work. I took some photos of the rim top and stem. Once Jeff removed the lava on the inside edge of the rim top it was in pretty rough condition. There were cuts, nicks and burned areas all around the inner edge and the bowl was out of round from the damage. The outer edge of the bowl looked very good. The close up photos of the stem shows that it was very clean and there was some tooth marks and chatter on the stem just ahead of the button. The acrylic was very scratched.The fit of the stem in the shank is off. It looked like the shank end had been rounded slightly and the stem was definitely larger than even the straight portion of the shank. It was poorly fit and that makes me think it is a replacement stem. The question I needed to answer was how far to go with the refitting of the stem. I knew that I wanted to bring it down as close as possible so that transition between the shank and stem was smooth. I decided to work on this as the first item of my part of the restoration. I took some photos to try and capture the variation between the stem and shank. Hopefully you can see what I mean even with my poor photos. I have used red arrows to identify trouble areas.I probably spend an hour or more hand sanding the stem to fit the shank. Often I do that with the stem off and flatten it, constantly checking for progress. I left the stem in place on this pipe for much of the sanding process as I was seeking to make a smooth transition on an already rounded shank end. The photos below tell the story. The next two photos show the stem after much sanding my way through movies on Netflix. It is far better than when I began. The transitions on the sides are perfect while the top and underside I tried to accommodate the rounded shank end as much as possible.With the shank/stem transition improved I was ready to move on to dealing with the issues of the inner edge and rim top. I removed the stem and set it aside and took the bowl in my hands. I used a folded piece of 220 grit sandpaper to smooth out the edge and clean up the slight bevel to mask the damaged areas. I lightly topped the bowl as well to remove the damage on the rim top and smooth out briar. Once the bowl is polished the bevel is hardly visible and the bowl looks better.With that done I decided to call it a night. The pipe still smelled strongly of old tobacco even after all the cleaning so I stuffed the bowl with cotton bolls and used a syringe to fill it with isopropyl alcohol. I set the bowl in an old ice tray and left it while the cotton and alcohol did its work. The second photo shows what I found this morning when I came to the work table. I removed the cotton bolls and pipe cleaner and cleaned out the shank with pipe cleaners and alcohol. It was very clean and it smelled far better!I was happy with the way the rim top and edges looked so I moved on to polish the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad with a damp cloth. The grain really began to stand out and the finish took on a shine by the last sanding pad. The photos tell the story! I worked some Before & After Restoration Balm into the surface of the briar with my fingertips. The product works to clean, enliven and protect the briar. I let the balm sit for about ten minutes and then buffed with a cotton cloth to raise the shine. The photos show the bowl at this point in the restoration process. I laid the bowl aside and turned to deal with the refit stem. I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I was able to remove the scratching and tooth marks with the micromesh. I wiped it down after each sanding pad with a cloth containing some Obsidian Oil. I finished polishing it with Before & After Pipe Stem Polish – both Fine and Extra Fine and buffed it off with a cotton cloth. This Savinelli Made Billiard Sitter was a bit of a pain to work on. The amount of sanding to fit the stem even the way I have it now was a lot. But I am happier with the pipe now that I have finished it. The pipe looks a lot better. The finish on the pipe is in excellent condition and the contrasting stains work well to highlight the different grain patterns on the pipe. The variegated brown and gold acrylic stem just adds to the mix. With the grime and debris gone from the finish and the bowl back in round it was a beauty and the grain just pops at this point.

I put the stem back on the bowl and buffed the pipe with Blue Diamond on the buffing wheel. I carefully avoided the stamping on the shank and stem during the process. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing it with a clean buffing pad on the buffer. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Savinelli Billiard with a flat rectangular stem is a nice take on a classic billiard. The finish on the bowl combines various stains to give it depth. It is very well done. Give the finished pipe a look in the photos below. I can only tell you that it is much prettier in person than the photos capture. The dimensions of the pipe are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: ¾ of an inch. It a great looking pipe in great condition. Thanks for walking through the restoration with me as I worked over another interesting pipe. This pipe will be added to the rebornpipes store soon. If you want to add it to your collection send me an email or a message! Thanks for your time.

Rusticating A Willard That Was A Gift For My Colleague…

Leave a reply

Blog by Paresh Deshpande

My job involves a lot of transfers and frequent shifting of our household to a completely new place. At times, it is we who move to our work place alone while our families stay back for children’s education or when accommodation is not available or when the new place is in a remote area and fraught with risks. I moved to my present place of work alone. Here, I had a very fine set of colleagues with whom I gelled well. As time went by, these colleagues got transferred and new colleagues joined. However, when the last of my old colleagues got his transfer orders, I wanted to gift him a pipe as he has started to enjoy pipes more than his cigars.

Abha, my wife, had sent me one lot of 40-45 pipes that she had cleaned up and all ready for my part of restoration process. From this lot of the pipes that I had earmarked as for sale/ gifting, he selected a pipe that had come to me as part of my Mumbai Bonanza.

For those readers who have missed out on how I came to purchase this lot, here is the background story….

I was fortunate enough to have heeded the advice of my dear friend and mentor, Steve, and struck a deal with a junk collector from Mumbai. He did not know what he was selling and I did not know what I was buying as we reside in different cities!! The argument that Mr. Steve presented was that if not anything, I shall at least have some spares and this was logical. I struck a deal and here are pictures of the pipes that I received in this lot. This lot contains some very nice collectible pipes, a few well known brands and some mediocre brands. Overall, with seven Dunhill pipes, a Preben Holm #1 FH, a couple of “Made in England” Pete System pipes, a couple of Charatan’s Belvederes, Custom-Bilt, Stanwell and other assorted pipes, I would say that I had struck a decent deal!! This is indeed my “Mumbai Bonanza”.

The pipe selected by my colleague and now on my work table from this find (sixteenth pipe being restored) is a bent billiard pipe with flame shaped worm rustications, a poor imitation of worm rustications as seen on Custombilts from the Wally Frank era! It is indicated in yellow arrow in the picture below. It is stamped on the left side of the shank as “WILLARD” in block letter over “IMPORTED BRIAR” again in block letter. The right side of the shank is devoid of any stamping. The stem bears a “Dot” logo in Yellow, embedded on the left side of the stem. Now coming to the research of this brand and line/model in specific, I referred to pipedia.org. Though there are no reams of information on this brand or model, the information provided gives a clear perspective of this brand and its aim. Here is the link (https://pipedia.org/wiki/Willard).

“The Willard pipes were made by Sparta Industries in Sparta, N.C from 1963 to 1975 (about 60,000 pipes per week). Some were distributed by the Post and Base Exchanges that serviced the military during the Vietnam War. Others were produced for R. J. Reynolds Tobacco. (preceding content from the “Pipes” website http://www.pipephil.eu/index.html)

Lord Abbott was either a sub-brand or a series produced by Willard —Dgillmor 22:42, 10 May 2012 (CDT)”

From the above information, it is evident that the pipe currently on my work table is from the period 1963-75. With this input on the vintage of this pipe, I move ahead with the restoration of this 42 plus years old pipe!

Initial Visual Inspection
The stummel is covered in dust and dirt giving it a dull appearance. The Custombilt like worm rustications are uneven, without any finesse and filled with dirt and grime. There are a couple of fills that are plainly visible. These will need to be refreshed, if needed. It’s a matter of personal choice; however, I could not help but wonder what it was that attracted my colleague to this pipe in the first place!! I got my answer the next day when he said that he liked the shape and lightness of this pipe. Thus, it was not the grains (which were zero!) or the worm rustication that he was interested in and could be done away with to make it more attractive. With this input from him, I decided to rusticate the stummel as I was not very happy with the appearance of this pipe at this stage. A thick layer of cake can be seen in the chamber. The smooth rim top surface is covered in dirt, dust and grime with a few dents and dings thrown in for good measures. The condition of the inner walls of the chamber will be known once the cake has been taken down to the bare briar. The inner rim condition appears to be in good condition with no burn/ charred surfaces. Even the outer rim edge appears to be in a decent condition. Only once the stummel has been thoroughly cleaned that I can be sure of my initial appreciation. In spite of the thick cake, the chamber odor is surprisingly not strong, yet I shall be subjecting it to a salt and alcohol treatment to freshen it up for him.The shank end has a metal band and this metal band extends inside the shank with threads, over which the threaded stinger is seated in to the mortise. Thankfully, the band and threads are all intact. The mortise is blocked with dried gunk, adversely affecting the airflow. The metal band is dull and dirty in appearance.The vulcanite stem is oxidized and has calcification deposits towards the button end. The lower and upper stem surface is peppered with tooth chatter. The button edges also need to be sharpened. The stinger opening and the horizontal slot is covered in accumulated oils and tars. The alignment of the stem and shank is skewed with the stem being overturned to the right. Initial Cleaning By Abha…
The initial cleaning on this pipe was done by Abha, my wife (she has cleaned up around 40-50 pipes and these have now reached me for further restoration). She reamed out the complete cake and further smoothed out the chamber walls with a folded piece of 220 grit sand paper. She further cleaned out the internals of the shank with pipe cleaners and alcohol and cotton buds. She followed the internal cleaning of the shank with external cleaning of the stummel using Murphy’s Oil soap and hard bristled tooth brush and dried it with paper napkins and cotton cloth.Next she cleaned out the internals of the stem air way and immersed it in “Before and After Deoxidizer” solution (pipe is marked in indigo blue arrow) along with the stem of other pipes in line for restoration. Once the stem had soaked overnight, she cleaned the stem under running warm water and scrubbed the raised oxidation from the stem surface using Scotch Brite pad. She further removed the oxidation by scrubbing the stem with 0000 grade steel wool and applied a little olive oil to rehydrate the stem.Once The Pipe Is On My Work Table…
The cleaned up pipe presents a very clear picture of what needs to be done to restore this pipe to a decent and smoke worthy condition. I really cannot thank Abha, my wife, enough for all the help and support that she extends in my pursuance of this hobby. I proceed to carry out my appreciation of the work that needs to be done on this pipe to restore it. The cleaned up pipe, as I received it, is shown below. The chamber walls are without any heat fissures or pits and that’s a big relief. The rim top surface is peppered with dents and dings. The inner rim edge shows slight darkening all round and should be easily addressed with a couple of turns of a piece of 220 grit sand paper along the edge. There are some minute chipped spots on the outer edge. The condition of the chamber is good and will not require much repair work. There are no ghost smells in the chamber. The stummel surface is nice and clean. The worm rustications, though clean, are still not visually pleasing. There are a large numbers of fill now plainly visible (only larger ones are enclosed in yellow circle). The mortise is clean and air flow is smooth. The metal spacer ring is also clean and intact. The vulcanite stem had cleaned up nicely. The upper stem surface has a couple of deep bite marks at the base of the button and also in the bite zone. The lower surface has some minor tooth chatter in the bite zone. The button edges on both the surfaces need to be sharpened. The aluminum stinger is clean.The seating of the stem stinger in to the metal threaded mortise is off center. The stem is overturned to the right and will have to be readjusted to perfectly align with the shank and the stummel.The Process
The first issue that I addressed in this project was that of the stem repairs. I painted both surfaces of the stem with the flame of a lighter to raise the tooth chatter and bite marks to the surface. This also helps in loosening minor oxidation from the stem surface. I sand the entire stem surface with a folded piece of a 220 grit sand paper to remove the loosened oxidation. I wiped the stem with a cotton swab and Murphy’s oil soap to further clean the surface. Even though most of the tooth indentations have been eliminated by heating the damaged stem portion, one deep indention is still seen on upper surface in the bite zone and a minor bite mark is seen on the button edge on the lower stem surface. I filled the tooth indentation in the button edge on lower and upper stem surface with a mix of activated charcoal and CA superglue and set it aside for the fill to cure.With the stem fills set aside for curing, I decided to work the stummel. The other day during a Face Time video call with Steve, we discussed the best way to transform this stummel. The long and short of the discussion was that it was decided to rusticate the stummel. This would help to mask the fills and provide a very tactile feel while smoking. It would also provide me an opportunity to practice rustication. With this decision finalized, I proceed with rusticating this stummel.

Now, this would not be my first attempt at rustication as I had rusticated one a few months back, here is the link to the write up (https://rebornpipes.com/2019/08/02/gifting-my-mentor-and-dear-friend-steve-an-alexander-zavvos-hygrosystem-pipe/).

I referred to the above write up and other subject write ups on rebornpipes to understand the mistakes committed and decide on the look/pattern of rustications over the stummel surface. I decided to maintain a smooth ring atop the rustication below the outer edge of the rim and also at the shank end. I used a transparent tape to demarcate the area that I wanted to keep smooth that is the rim top and about quarter of an inch below the rim outer edge and a thin band at the shank end. Similarly, I covered whatever little that remained of the stamping. From my experience, I knew that this is a very essential step as I realized during rusticating that it is very easy to lose track and transgress over the areas and stampings which you wish to preserve.To rusticate, I firmly held the stummel in my left hand and with my right hand and began gouging out the briar. The technique is to firmly press the pointed four prongs of the modified Philips screwdriver in to the surface, rotate and pull out the removed chunk of briar. I worked diligently till I was satisfied with the rustications and the appearance of the stummel. I cleaned the stummel surface with a brass wired brush to clear all the debris from the rustications. I decided to take a break from further rusticating the surface as the process is tiring and painful. This makes me want a better and efficient rusticating tool. While giving my right hand a rest from this task, I decided to work on the damage to the rim top and edges. I start by addressing the rim top surface damage. I top the rim on a piece of 220 grit sand paper, checking frequently till I am satisfied that the darkened surface is addressed to a great extent and the rim top surface is nice, smooth and even. The inner and outer edges are still uneven, though much better than before topping, and shall be addressed subsequently.With a folded piece of a 220 grit sand paper pinched between my thumb and forefinger, I create a slight bevel on the inner and outer edges of the rim top surface. This helps to mask and address the minor dents and dings that had remained on the rim edges after topping. I am careful so as not to alter the profile of the stummel by excessive topping or creation of the bevels. I am pretty pleased with the appearance of the rim top and edges at this stage. I cleaned the stummel with pure acetone and cotton swab to remove the old stain completely in preparation for the polishing and subsequently, a new stain. After the cleaning, I set the stummel aside to dry out naturally. I turn my attention back to the stem. The fill has cured nicely and with a flat head needle file, I sand the fill to achieve a rough match with the surrounding surface. To achieve a perfect match, I sand the stem with a 220 grit paper, progressively moving through to finish with a 1000 grit sand paper. As expected, a clean and neat looking stem stared back at me. I rub a little Extra Virgin Olive oil into the stem surface to hydrate it and set it aside to be absorbed in to the vulcanite.I polish the rim top and the smooth surfaces of the stummel using micromesh pads, wet sanding with 1500 to 12000 grit pads. I am happy with the appearance of the stummel at this point in the restoration. The stummel is now ready for a fresh coat of stain. I heat the stummel surface with my heat gun to open up the pores on the stummel so that the stain is well set. I mix black stain powder with isopropyl alcohol and liberally apply it over the heated surface, flaming it with the flame of a lighter as I went ahead to different self designated zones of the surface. This helps in the setting of the stain in the grain of the briar. Once the stain has set in well, I again warm the stummel with my heat gun. This helps the stain to be absorbed and set further into the briar. I mount a felt cloth buffing wheel on my rotary tool and gently buff the entire stummel surface to remove the stain crust. I wipe the stummel with a cotton swab and alcohol to remove any excess stain and follow it up sanding the raised rustication with a folded piece of 220 grit sand paper. This is followed up by careful dry sanding of the entire stummel, especially the raised rustications with 1500 to 12000 grit micromesh pads. This not only lightens and highlights the rustications, but will also provide a smooth surface for the next coat of stain. Here is how the stummel appears at this stage. I buff the stummel with a horse hair shoe brush to remove any sanding dust resulting from the micromesh sanding. I apply a small quantity of “Before and After” restoration balm to rehydrate and rejuvenate the briar and set it aside for some time. Thereafter, I buff and clean the stummel with a microfiber cloth. I apply a second coat of Medium Brown stain over the stummel and the shank extension, going through the same method as described above and set them aside for the stain to set. With the stummel set aside for the stain to set, I turned my attention to the stem polishing. Using the micromesh pads, I complete the polishing cycle by wet sanding the surface with 1500 to 12000 grit pads. The stem looks great with the fills nicely matched with the rest of the surface. I rub a little quantity of Extra Virgin Olive oil in to the stem surface and set it aside to be absorbed by the vulcanite.Coming back to the stummel, once the stain is set I wipe it down with a cotton swab and alcohol to remove any excess stain and lighten it from the raised rustications. Mounting a felt cloth buffing wheel on my rotary tool, I go about removing the crust formed by the stain over the raised rustication. The second coat of brown stain has added another layer of texture to the appearance of the stummel. Next, I rub a small quantity of “Before and After Restoration Balm” in to the briar with my finger tips, work it deep in to the sandblasts and let it rest for a few minutes. The balm almost immediately works its magic and the briar now has a nice vibrant appearance with the beautiful rusticated patterns on full display. I further buff it with a horse hair shoe brush. I rub a small quantity of Halcyon II wax into the surface and immediately wipe it with a microfiber cloth. The only issue that remains unaddressed at this stage is the issue of the overturned stem. With the flame of a lighter, I heat the aluminum stinger to a point where the stem is just about able to rotate on the stinger. I reattach the stem to the shank while the stinger was still warm, and turned it till the alignment was as perfect as I desired and set it aside to cool down.To complete the restoration, I mounted a cotton cloth buffing wheel on to my hand held rotary tool. I set the speed at about half of the full power and applied several coats of carnauba wax. I finished the restoration by giving the entire pipe a rigorous hand buffing using a microfiber cloth to raise the shine further. The finished pipe looks amazingly beautiful and quite a transformation it was. It is now ready for its long second innings with my colleague. I wish that he enjoys his pipe and remembers our association for a long time to come. I wish to thank our esteemed readers for sparing their valuable time to read through and any input or advice is always welcome.