Tag Archives: Peterson’s Pipes Made in the Republic of Ireland

Restoring a Republic Era Peterson’s De Luxe XL9S Bent Billiard

Blog by Steve Laug

The next pipe I have chosen is a Peterson’s De Luxe XL9S sandblast bent Billiard. It came to us from an antique store in Pocatello, Idaho, USA back in 10/20/17. The finish is deeply sandblasted and dirty but there is some great grain around the bowl sides and shank. The finish is otherwise in great shape. It was stamped on the underside of the shank and read Peterson’s [over] De Luxe [over] the shape number XL9S. That is followed by a three line stamp MADE IN THE [over] REPUBLIC [over] OF IRELAND. It was filthy when Jeff brought it to the table. There was a thick cake in the bowl and a thick overflow of lava on the rim top and the inner edge of the bowl. It was hard to know what the condition of the rim top and bowl were under that thick lava coat. The Sterling Silver band is heavily tarnished. It is stamped as well and reads Peterson’s [over] Dublin on the top left. Further down the left side of the band it is stamped Sterling Silver. On the underside and starting up the right side it has three hallmarks – Hibernia, a Harp and the lower case letter “n”. The stem had a “P” stamped on the left side of the saddle and was oxidized and had tooth marks and chatter on the top and underside on and near the button. Jeff took photos of the pipe before his cleanup work. Jeff took photos of the rim top and stem to show the general condition of the pipe. The bowl is heavily caked and the rim top and edges have a thick lava overflow. The stem is lightly oxidized and has tooth marks on the top and underside near the button. Jeff took photos of the bowl sides and heel to show the grain that was around this bowl. It is a nice looking pipe. The blast is quite deep and attractive. He took photos of the underside of the shank to show the stamping. The stamping is readable in the photos below and is as noted above. He also captured the stamping on the silver band. I am including the link to the Pipedia’s article on Peterson pipes. It is a great read in terms of the history of the brand (https://pipedia.org/wiki/Peterson).

I turned to “The Peterson Pipe” by Mark Irwin and Gary Malmberg to get some background on the Peterson’s Deluxe Line. On page 297 it had the following information.

De Luxe (1915-) Introduced in newspaper advertising in 1916, production of this high-grade smooth finish model may have been stalled by the Great War and domestic disturbance. It will not appear in Peterson catalogs until ’37. Specimens documented from 1915 to the thirties are extremely rare and confined to extra-large house pipes and occasionally medium sized pipe with unconventional shapes. Specimens from 1930-1950 appear in a wide selection of Classic Range shapes, often as Canadians. Catalogs from 1937-50 list it as the ‘the finest possible quality obtainable.’ After ’50 the Supreme would supplant the De Luxe as the top of the line model, and to this day the De Luxe is a high quality pipe but not the highest. Early models often have no COM. Models from the twenties until the sixties will be stamped IRISH over FREE STATE, EIRE, LONDON MADE over ENGLAND, MADE IN over IRELAND (forming a circle) or MADE IN THE over REPUBLIC over OF IRELAND. The last three COM stamps, used from ‘38 through ’68 when no hallmarks were stamped on Peterson mountings, can never be precisely dated. If a De Luxe was made in ’69 or later it will be hallmarked with a date designator and always have a Republic COM. See also Special De Luxe.

Judging from the description above, the pipe I am working on is stamped with the stamp noted in red above. It reads MADE IN THE REPUBLIC OF IRELAND in three lines which narrows the date to between approximately 1938 and the present. It also has a silver Hallmark that make it a pipe made after 1969. Now it was time to narrow down the date further.

I turned to a blog I wrote on rebornpipes that had a Peterson’s catalogue and a hallmarking chart (https://rebornpipes.com/tag/peterson-hallmark-chart/). I have included it below. On the chart I looked for a lower case “n” in a hexagonal cartouche. I also included a enlargement of the chart and drawn a box around the “n” in red. It dates the pipe to 1979. Jeff had done a great job cleaning up this 1979 Peterson’s De Luxe pipe. He reamed the pipe with a PipNet reamer and cut back the cake back to the bare briar. He cleaned up the walls with a Savinelli Fitsall Pipe Knife. He scrubbed the interior of the bowl and shank with pipe cleaners, cotton swabs and alcohol to remove the tars and oils. He scrubbed the exterior of the pipe with Murphy’s Oil Soap and a tooth brush to remove the grime from the finish. He worked on the rim top lava and darkening with the soap and tooth brush. He scrubbed the inside of the stem with alcohol and pipe cleaners. He scrubbed the exterior with Soft Scrub and then soaked it in Before & After’s Pipe Stem Deoxidizer. He washed it off with warm water to remove the Deoxidizer. I took photos of the pipe when I brought it to the work table. I took some close up photos of the rim top and also of the stem surface. I wanted to show how well it had cleaned up. The rim top and inner edges around the bowl looked very good. I also took close up photos of the stem to show the tooth marks on the surface near the button. I took a photo of the stamping on the underside of the shank. It reads as noted above. I also took a photo of the band and the stamp on the left side of the saddle stem. I removed the stem and took a photo of the pipe to have a look at the parts and overall look.I decided to address the tarnish on the silver band of the pipe first. I scrubbed it with some tarnish remover and finished with a jeweler’s cloth. The silver looked very good. I worked some Before & After Restoration Balm into the surface of the briar with my fingertips and a horsehair shoe brush to clean, enliven and protect the briar. I let the balm sit for 15 minutes and then buffed with a cotton cloth to raise the shine. The photos show the bowl at this point in the restoration process. I scrubbed the surface of the stem with Soft Scrub Cleanser to remove the oxidation on the surface of the vulcanite. I “painted” the tooth marks on the vulcanite with the flame of a lighter and was able to lift all of them on the topside. There was one against the edge of the button on the underside that did not lift all the way. I filled it in with a drop of clear CA glue and set it aside to cure. I used a folded piece of 220 grit sandpaper to smooth out the repair and then started polishing it with 400 grit wet dry sandpaper.I painted the “P” stamp on the left side of the saddle stem with white acrylic fingernail polish. I worked it into the stamp with a tooth pick. I scratched off the excess acrylic with the tooth pick and a fingernail. It looked better though the curve of the right side of the “P” was faint. I polished the stem with micromesh sanding pads – wet sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it with Before & After Pipe Stem Polish – both Fine and Extra Fine. I am excited to finish this Republic Era Peterson’s Deluxe XL9S Bent Billiard. I put the pipe back together and buffed it with Blue Diamond on the buffing wheel. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. It is fun to see what the polished bowl looks like with deep sandblast all around it. Added to that the polished black vulcanite stem was beautiful. This sandblast De Luxe XL9S is great looking and the pipe feels great in my hand. It is light and well balanced. Have a look at it with the photos below. The dimensions are Length: 6 ½ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 61grams/2.15oz. It is a beautiful pipe and one that will soon be on the rebornpipes store in the Irish Pipe Makers Section of the store. If you want to add it to your collection let me know. Thanks for walking through the restoration with me as I worked over this pipe. Thanks to each of you who are reading this blog.

I do not understand why Peterson coats some of their pipes with a thick varnish coat

2 Replies

Blog by Steve Laug

Yesterday afternoon Dallas (a long time pipe friend) stopped by to pick up a pipe I had repaired for him and to sit on the front porch and enjoy a bowl and some fellowship with each other. Due to COVID-19 we have only had virtual visits for over a year now so it was really good to see him and posit our solutions to the world’s problems. We covered a lot of topics that come naturally to men of a certain age! In the course of our discussion he brought out a very shiny Peterson’s Kinsale XL25 Made in the Republic of Ireland. The pipe was very glossy and it was one that he had in his collection for a long time. It should have been showing wear on the finish but this “plastic” coated looking finish was impervious to time and use it appeared. There was a slight bit of peeling on the rim top but other than that it looked like new. He handed it to me and told me his woes with this pipe. He said that the pipe became extremely hot when he smoked it. He had tried everything to change that but nothing mattered. Dallas has been smoking a pipe for almost 60 years now so it is not a technique issue. I am certain it is the fault of the thick “plastic” looking finish on the pipe. I have stripped other Peterson’s that had the same issue for him and the work always improves the dispersal of the heat. He wanted me to do the same with this pipe. I took a close up photo of the rim top to show the thickness of the cake and the peeling varnish on the rim top. The edges look very good and other than the bubbles in the varnish coat the top looks good. The stem is also shown to show the light oxidation of time on the vulcanite and the tooth marks and chatter that come from use.I took photos of the stamping on the shank to show the brand and the age of the pipe. It reads Peterson’s Kinsale on the top of the shank and Made in the Republic of Ireland on the underside. On the right side of the shank was the shape number XL25. The varnish had filled in the numbers showing that it had been varnished after stamping.I removed the stem from the shank and took a photo of the left side of the bowl to try to capture the shape and the grain. It really is a beauty.I like working on clean pipes so I reamed the bowl with a PipNet pipe reamer to take the cake back to bare briar. I cleaned up the reaming with a Savinelli Fitsall Pipe Knife. I sanded the bowl with 220 grit sandpaper wrapped around a piece of dowel. Once finished the bowl was clean and smooth. Now it was time to tackle the obnoxious varnish coat. I tried to remove it with straight acetone and came up with nothing. The seal on the finish was solid and seemingly impervious to my work at this point. I lightly sanded the finish on the bowl with a folded piece of 220 sandpaper to break through the surface. Once I had done that the acetone worked well to remove the finish from the briar. I repeated the process until the shiny coat was gone and I could feel the briar in my hand and see the grain without the top coat over it. I polished the briar with micromesh sanding pads – wet sanding with 1500-12000 grit pads. I wiped the briar down after each pad. The grain began to really come alive through the polishing. I worked some Before & After Restoration Balm into the surface of the briar with my finger tips. The product is incredible and the way it brings the grain to the fore is unique. It works to clean, protect and invigorate the wood. There is a rich shine in the briar but it is not that previous plastic-like shine. I cleaned the shank, mortise and airway in the stem with pipe cleaners, cotton swabs and isopropyl alcohol to remove the tars. Dallas had mentioned the stem was very tight but once I cleaned it the fit was just the way it should have been.I started polishing the stem with 1500-2400 micromesh sanding pads. I wiped it down after each pad with Obsidian Oil. I paused my polishing to touch up the P stamp on the top of the saddle with some Rub’n Buff Antique Gold. I worked it into the stamp with a tooth pick and buffed it off with a soft towel. I went back to the micromesh and polished the stem with 3200-12000 grit pads, again wiping it down after each pad with Obsidian Oil. I finished the polishing with Before & After Pipe Stem Polish, both Fine and Extra Fine. I gave it a final coat of Obsidian Oil before putting it back on the shank. Once the varnish was stripped off this is a nice looking Peterson’s Kinsale XL25 Pipe with an oval shank and a vulcanite saddle stem is a great looking pipe now that it has been restored. The briar is clean and the grain really came alive. The rich brown and black stains gave the grain a sense of depth with the polishing and waxing. The grain really popped. I put the vulcanite stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Peterson’s Kinsale XL25 really is a beauty and feels great in the hand and looks very good. I think that Dallas will be very happy with it once he picks it up. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 2 ¼ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 65 grams/2.29 oz. The pipe looks very good and I look forward to what Dallas thinks of it. Thanks for reading this blog and my reflections on the pipe while I worked on it. It was a fun one to work on!