Tag Archives: Oxidation

De Profundis: Rescuing a Peterson 301

Leave a reply

Blog by Kenneth Lieblich

If this pipe could talk, surely it would say, “Out of the depths I have cried unto Thee, O Lord…”. This great pipe has truly come from the depths of … who knows where. It’s a handsome, rugged Peterson 301 System rusticated bent pot with a P-lip. As is often the case, this pipe (and the others in the photo below) came from an old gentleman, now deceased, who lived on Vancouver Island. The first two pipes below are both 301s and the third is perhaps/maybe a 317 (not sure yet). I have no idea what he did with these pipes (dropped them down the mines perhaps), but boy-oh-boy, these are pretty rough. No problem – it’s my job to sort things out.The only markings to be found on this pipe are the 301 found on the underside of the stummel, the K&P [over] Peterson on the nickel ferrule, and the double-stamped, stylized P on the stem. That’s annoying! Mark Irwin of Peterson Pipe Notes has written a few good articles about the 301s on his blog and I recommend reading one here and another one here. Of course, Steve has also written restoration blogs about the 301, including this one and it contained an important tidbit of information that I quote here:

I learned previously that the shape 301 was not introduced until 1975. Considering the Republic stamp, this one would likely date between 1975 and 2000.

This was significant because, due to the markings being almost entirely worn on this pipe, there was nothing on the wood other than the number 301 – and I couldn’t tell an age from that. Charles Lemon from Dad’s Pipes also has a post about a 301, which he describes as coming from the “1970’s era”. Now, what’s interesting about Steve and Charles’ pipes is that the patch of briar which shows the marks is quite different from mine. Below are Steve’s, Charles’, and my pipes, respectively. The first two are sort of freeform oval-ish shapes. Third (mine) is a rectangle and I wonder if that indicates a different era. I don’t know, but any of you reading this do, please let me know!  This pipe is filthy beyond description – but must have been smoked frequently and with great affection. The stem has dirt everywhere, severe toothmarks aplenty, and calcification as I have seldom seen. Meanwhile, the stummel looks as though oily dirt has been rubbed into the surfaces of the rustication. The rim is coated in lava, the front edge of the rim is bashed, and the bowl is clogged with cake. Some spots on the rustication are really worn – the old fellow must have really loved his pipes. I began by cleaning some of the calcification on the outside of the stem. I took a blade (an old butter knife, actually) and began gently scraping at all that build-up. Obviously, I took it easy, as I did not want to damage the stem’s vulcanite any further. The butter knife worked quite well and I got a good amount loose. I followed that up with some Murphy’s on some cotton rounds to try and scrub the rest away. I broke out the isopropyl alcohol and pipe cleaners, and got to work on the inside of the stem. Predictably, it was unbelievably dirty and I went through a good number of pipe cleaners in order to clean it up.As I mentioned, there were quite a few dents in the stem. Some were obviously tooth marks, but other dents looked like blunt force trauma! Time to break out the BIC lighter to see if it could raise some of them. Quite frankly, it did not do much – this repair was going to require some considerable sanding etc. Before that, however, the stem went for an overnight soak in the deoxidizer. The following day, the oxidation had migrated to the surface and would be fairly straightforward to remove. I scrubbed vigorously with SoftScrub to remove the leftover oxidation. At this point, I painted the accidentally-duplicated P on the stem, as it was pretty rough – just like everything about this pipe.

Once clean, I set about repairing the dents. Before I moved on to the Micromesh pads, I built up the dent damage on the stem with black cyanoacrylate adhesive and let it fully cure. It turned out that this was not as straightforward as I had hoped. It took more than one application of adhesive to sort this problem out. I sanded the lumps down with my needle files and my grey pads, to make the stem look sort of normal. I then used all nine Micromesh pads (1,500 through 12,000 grit) to bring out the lovely black lustre on the stem. I also used Obsidian Pipe Stem Oil in between each of the last five pads. On to the stummel – this is where the lion’s share of the work was. The insides (both bowl and shank) were overwhelmed with cake and tar and anything else you’d care to mention. The bowl really needed to be reamed, so I used the KleenReem to scrape off as much built-up cake as possible. Generally, I prefer to sand the chamber down to bare briar. When restoring, it is important to ensure that there is no damage to the briar under the cake. There are a few situations when I might leave some cake in the bowl, but not today. There were definitely some craze lines in the briar on this pipe. I’ll come back to that later. Just like the bowl, the shank was absolutely disgusting. It had never been cleaned – or, not for many decades. I started cleaning the inside with isopropyl alcohol, Q-tips, and pipe cleaners. This took a while. The inside was very dirty and required and extraordinary number of Q-tips and pipe cleaners. Eventually some cleanliness came to it.I threw the stummel in my alcohol bath in the hope that it would loosen some of the ground-in filth on the outside of the bowl. After 24 hours, this worked a bit, but not enough. I added some scrubbing with Murphy’s and a toothbrush. This made things much better, but it’s a case of two steps forward and one step back: sure, it’s clean, but lots of the stain in now gone too. I decided to de-ghost the pipe despite what I had just done with the alcohol bath. I thrust cotton balls into the bowl and the shank and saturated them with 99% isopropyl alcohol. I let the stummel sit overnight. This caused even more oils, tars and smells to leach out into the cotton. The bowl was nice and clean after this.On to the ferrule – which was bashed and discoloured from years of mistreatment. Somewhat to my surprise, the ferrule came off very easily and required no special effort. I began by cleaning the metal with some SoftScrub on cotton rounds. This was quite good at removing the unsightly bits. I used some of my MicroMesh pads (only 3,600-12,000) to eliminate some of the minor scratches on the metal. It also gave a nice shine which clearly hadn’t been seen for decades. I used a jewelry cloth to give the final polish to the nickel. This ferrule would always retain some small dents etc. from its hard life, but it looks much improved. And this is where I stopped for a looooong time. It occurred to me that the amount of work involved in this pipe was tremendous. I was torn about how invasive I wanted to be in my pipe surgery. What about the damage to the rim? What about rematching the stain? What about the heavily worn sections of the rustication? Perhaps my temperament didn’t suit this pipe too well. I freely admit that I set aside the pipe for nearly six months before coming back to it. That sounds absurd, I know, but it was either that or chucking it in the fireplace.

Back in the present day, I began by working the rim back into shape. I sanded it down on my topping board so that it was level (it wasn’t before). I used some tools, including my Dremel and some modified screwdrivers, and re-rusticated the rim. It looked great, but too sharp. So, I sanded the sharp bits to add some softness to the rim. At this point, six months on, I couldn’t remember what cleaning I had and had not done to the pipe. I dragged out some soap and some tube brushes and scrubbed the insides. I’m glad I did – it still needed it.I wanted to have another look at the underside of the stummel for any sign of markings. I used a piece of chalk and pretended this was an old gravestone rubbing. The 301 came out more clearly, but, sadly, nothing else was revealed. It was worth a shot.I knew I had to stain the stummel, but I wanted to address the heat crazes inside the bowl first. I prepared some heat-resistant epoxy and filled the cracks and gouges, ensuring that the epoxy was evenly spread throughout the bowl. Of course, I did plug the draught hole with a folded pipe cleaner (coated in petroleum jelly) to make sure none of the epoxy made its way up there. Once done, a good 24 hours was needed to ensure that the epoxy was properly set.Having completed that, it was time for staining. This would require more than one colour and some finessing to get right. I applied black leather dye with a cotton dauber to colour the recesses (or valleys, if you like) of the rustication. I flamed it with my BIC lighter and let it set. This dye is alcohol-based, so I used isopropyl alcohol to wipe down the pipe and remove excess stain. This wasn’t sufficient, so I also used some 0000-grit steel wool. I coated it again with cordovan leather dye, flamed it again, and let that set too. As before, I wiped it down with alcohol to provide depth, nuance, and variation to the colour. I was pleased – and would be more pleased soon. At long last, I was off to my bench buffer to put the final touches on this pipe. I first gave it a thorough going-over with Red Tripoli. This may seem strange, but I needed to lighten the colour of the high points of the stummel. Then I used the White Diamond compound. Following that, several coats of conservator’s wax created a beautiful, glossy seal on the pipe and moved closer to closure for this long and involved repair.At this point, I glued the ferrule back in place. Then I gently sanded the inside of the bowl to provide a rough surface for what was to come next. I thinly coated the entire inside of the bowl with a mixture of activated charcoal and my wife’s homemade yogurt. Once hardened, this provided a good, slightly rough surface for a new cake to build.This rugged and handsome Peterson 301 System rusticated bent pot has come out of the depths and is back to life. I am pleased to announce that this pipe is for sale! If you are interested in acquiring it for your collection, please have a look in the “Ireland” pipe section of the store here on Steve’s website. You can also email me directly at kenneth@knightsofthepipe.com. The approximate dimensions of the pipe are as follows: length 5¾ in. (145 mm); height ¾ in. (45 mm); bowl diameter 1½ in. (38 mm); chamber diameter ¾ in. (20 mm). The weight of the pipe is 2 oz. (60 g). I hope you enjoyed reading the story of this restoration as much as I enjoyed restoring it. If you are interested in more of my work, please follow me here on Steve’s website or send me an email. Thank you very much for reading and, as always, I welcome and encourage your comments.

Restoring a beautiful Bari Select Mandarin Made in Denmark 7824

Leave a reply

Blog by Steve Laug

The next pipe on the work table is a beautifully grained Bari Oval Shank Acorn. It is stamped on the topside it reads Bari [over] Select [over] Mandarin. On the underside it reads Made in Denmark [over] the shape number 7824. It came from a lot we purchased from a seller on eBay on 01/22/2024 from a seller in Jordan, Minnesota, USA. It is very nicely shaped Danish style acorn shaped bowl with a vulcanite saddle stem. The bowl has a thick cake and some lava overflow on the crowned rim top and bevelled inner edge. It was hard to know for certain if there was any damage on the top or rim edges because of the debris covering them both. Only cleaning would make that very clear. The vulcanite saddle stem had a worn Bari logo stamp on the topside of the saddle. It is dirty and has tooth chatter and tooth marks on both sides ahead of the button. Jeff took photos of the pipe before he started his cleanup. Jeff took photos of the bowl and rim top to show the cake in the bowl and the condition of both. It was heavily caked with a lava overflow on the rim top. The inner and outer edges look very good. He took photos of the top and underside of the stem showing the oxidation and tooth marks on the stem surface and button. Jeff took photos of the heel and the side of the bowl and shank to show the grain on the pipe. It is a beauty. Jeff took photos to capture the stamping on the sides of the shank. It is clear and readable as noted above. He also took a photo of the faint Bari stamp on the topside of the stem. I turned to Pipephil’s site (http://www.pipephil.eu/logos/en/logo-b1.html) to see if I could find a listing for the Bari Select Mandarin with this four digit number. There was nothing specifically listed for this line of Bari pipes. There was also good info on the brand as a whole and that it was founded by Viggo Nielsen in 1950 and he ran it until 1978 when Age Bogelund managed the production for them. In 1993 it was sold to Helmer Thomsen. I have included a screen capture of the section below.Pipedia gives a great history of the brand (https://pipedia.org/wiki/Bari) that is well worth reading. There were also photos of the Bari stamping on the Select Mandarin line of pipes.

Jeff reamed it with a PipNet pipe reamer and cleaned up the reaming with a Savinelli Fitsall Pipe Knife. He scrubbed out the internals of the shank and stem with alcohol, pipe cleaners and cotton swabs until the pipe was clean. He scrubbed the exterior of the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and grit on the briar and the lava on the rim top. The finish on the bowl looked really good when I got it. The rim top and edges looked very good. He soaked the stem in Briarville’s Pipe Stem Deoxidizer bath to remove the oxidation. The stem looked better and the deep tooth marks and chatter on the surface were also visible. When the pipe arrived here in Vancouver for the second stop of its restoration tour it looked much better than when he found it. I took photos of the pipe before I started my work on it. I took photos of the condition of the rim top and stem before I started working. The rim top looks very good and the bowl is spotless. The stem still shows some light oxidation remaining and some tooth chatter and marks on both sides near the button. I took photos of the stamping on the top and underside of the shank. The stamping was faint in spots but still readable. It reads as noted above. I took the bowl and stem apart and took a photo of the pipe to show the look of the pipe. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the bowl down after each pad with a damp cloth to remove the sanding dust. I worked some Before & After Restoration Balm into the finish of the bowl, rim top and shank with my fingertips to clean, enliven and protect it. I find that the balm really makes the briar come alive again. The contrasts in the layers of stain really made the grain stand out. I let the balm sit for 15 minutes and then buffed with a cotton cloth to raise the shine. The bowl really looks good at this point. I set aside the bowl and turned my attention to the stem. I “painted” the tooth marks on the surface of the stem and was able to lift all of them other than the one deep one on the underside. I filled in the mark with clear super glue. Once the repairs cured I flattened them out with 220 sandpaper to blend them into the surface. I sanded the stem with 320-3500 grit sanding pads and wiped the stem down after each pad with an Obsidian Oil saturated cloth to remove the grime and protect the stem.I touched up the Bari white logo on the stem with acrylic white fingernail polish. Once it dried I buffed off the excess with a cotton pad. The BA are too faintly stamped to take in the acrylic so the stamp is incomplete. I wiped the stem down with Obsidian Oil once more.I polished the stem with micromesh sanding pads – wet sanding it with 1500-12000 grit pads. I polished it further with Before & After Pipe Stem Polish – both fine and extra fine. Once again, I am the part of the restoration that I always look forward to – the moment when all the pieces are put back together. I put the pipe back together and buffed the bowl and the stem with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. It is fun to see what the polished bowl looks like with the smooth finish and the black vulcanite stem. This richly stained Bari Select Madarin 7824 Acorn is light weight and ready for you to load up a tobacco of preference and enjoy breaking it in. Have a look at it in the photos below. The dimensions are Length: 5 inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 50 grams/1.76 ounces. This is one that will go on the Danish Pipemakers Section of the rebornpipes online store shortly. Let me know if you are interested in adding it to your rack. Thanks to each of you who are reading this blog. Remember we are not pipe owners; we are pipemen and women who hold our pipes in trust until they pass on into the trust of the next generation.

A Pipe Hunt Find in Bellingham – A WDC Royal Demuth Imported Briar Root 25 Apple

Leave a reply

Blog by Steve Laug

On our recent Victoria Day Weekend (5/18/24) my family met Jeff and his wife in Bellingham for breakfast, a visit and a bit of pipe hunting. We visited three of my favourite antique malls and worked out way through the aisles of wares for sale. Jeff and I tend to divide and conquer, each walking through the aisles of the shop looking for pipes. The rest of the family moves through looking for their own treasures. We left the second shop and using Google maps worked our way to a new shop that I had not visited before. We walked into a nicely laid out shop and I asked the clerk if there were any pipes available. He walked us back to a display case and took out a circular pipe rack. There in the rack were two pipes remaining in it. The first was a square shank Irwin’s (GBD made) London Made London England 9487 shape and the second was an older WDC Royal Demuth Imported Briar Root 25. Both were great and were added to the hunt bag. Here is the link to the blog on the hunt and a photo of the pipes we added (https://rebornpipes.com/tag/bellingham-pipe-hunt/). I decided to take a break from the pipes in my queue of pipes to work on and deal with the Royal Demuth 25 Apple. It is the bottom pipe in the two photos above. It was an interesting shape that has some great grain under the grime on the bowl and shank. It is stamped on the left side of the shank and reads WDC in a triangle [followed by] Royal [over] Demuth. On the right side it is stamped Imported Briar [over] Briar Root [followed by] the shape number 25. On the underside of the shank it is stamped FILTER PAT’D [over] 1934. The stem has the WDC white triangle on the left side of the taper. The stem was an older style vulcanite with a narrow taper from shank to button. It was lightly oxidized and has some tooth marks on the top and underside of the stem near the button. The bowl had a thick cake in it and some bits and bobs of tobacco stuck to the walls. There was a thick lava coat on the rim top and edges. The finish had been varnished sometime in its life and it was peeling and there was a lot tars ground into the surface of the bowl. I took some photos of the pipe before I started working on it. I took photos of the rim top and stem to show the general condition of the pipe. The bowl is heavily caked and the rim top and edges have a heavy coat of lava overflowing on to them. It is hard to know with certainty the condition of the bowl at this point but clean up will reveal all. The stem is lightly oxidized and has light tooth chatter and marks on both sides ahead of the button end. I took photos of the stamping on the sides of the shank. You can see that it is faint in spots but it is still very readable. It reads as noted above. I removed the stem from the shank and took a photo of the parts to show how the pipe looks. I looked on Pipephil’s site and though there were many WDC pipes there was nothing stamped Royal Demuth and nothing with any of the other stamping on the shank sides of this pipe. I turned then to Pipedia (https://pipedia.org/wiki/William_Demuth_Company). As always there is a great history of this American brand. If you are interested be sure to turn there and take time to read about it.

Royal Demuth example with box and filters, courtesy of Doug Valitchka

There was an interesting example of the Royal Demuth provided by Doug Valitchka that has identical stamping to the one that I am working on. It is a different shape but it identical in terms of the stamping. It also looks like it takes a filter that is similar to the Medico filter but I will doulbe check that once it is thoroughly cleaned.There was also an advertisement for the WDC Changeable Filter Pipes that included the Royal Demuth. I have included that below.There is also a great article by Ben Rappaport on the Demuth – Dunhill Connection that is an enjoyable read (https://pipedia.org/wiki/A_Demuth%E2%80%94Dunhill_Connection%3F).

I now knew that the pipe was part of a line of Filter Pipes that WDC put out and that the filter system was patented in 1934. The stamping that the Filter was Pat’d 1934 tells that it came out after the patent was granted. However, I could not fine tune the date more than that. I also knew that the pipe I was working on was an older one because of the style of the stem – straight taper and smaller profile at the button ends.

I started my work on the pipe cleaning up the bowl and the shank. I reamed the bowl with a PipNet pipe reamer to take the cake back to bare briar. I cleaned up the remnants of the cake with a Savinelli Fitsall Pipe Knife. I sanded the bowl walls with sandpaper wrapped around a piece of briar to smooth them out. The inside walls were clean and there was no sign of burning or checking on them. Note the spotty varnish coat peeling on the bowl sides that would need to be removed. I decided to clean the internals before scrubbing the externals. I scrubbed the shank and the airway in the shank and the stem with pipe cleaners, cotton swabs and isopropyl alcohol. Once it was clean it smelled much better. To get rid of the peeling and spotty varnish coat on the bowl I wiped it down with some acetone (fingernail polish remover) on cotton pads until the shine was gone and the finish was quite smooth and clean. I scrubbed the externals of the bowl and shank with undiluted Murphy’s Oil Soap and a tooth brush to remove the grime in the finish. I rinsed the bowl off with warm water. I scrubbed the internals with a shank brush and soap to remove the remaining tars and oils inside both the stem and the shank. I was able to remove a lot of the lava on the rim top as well. The bowl was beginning to look much better at this point. The pipe really smelled strongly of the aromatic tobacco (perhaps Half & Half) that had been smoked in it before so it needed some work. I deghosted the bowl with 99% isopropyl alcohol and cotton bolls. I stuffed it and twisted a plug for the shank. I used an ear syringe to load it with alcohol and set it in a pipe rest to let it do its job. I would let it sit for several hours while I was at work today. In the evening I removed it and it was dark with tars and oils. I recleaned the bowl and shank afterwards and the pipe is smelling better! I sanded the bowl (rim top and shank) with sanding pads – sanding with 320-3500 grit pads and wiped down with a damp cloth after each sanding pad. The bowl began to take on a real shine. It was going to be a beautiful pipe. I wiped down the sanding dust with a damp cloth and restained the pipe with some Fiebing’s Cordovan alcohol based stain. I applied the stain and flamed it with a lighter to set the stain deep in the grain. It was a rich colour that I knew would look better with a little more work and buffing. I wiped the bowl down with alcohol on cotton pads to make the stain more transparent. I wanted to be able to see the grain. I wiped it down further with some 100% acetone to get even more transparency. It is beginning to look very good at this point. I followed that by polishing the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads and wiping the bowl down after each sanding pad. The grain really began to shine through. It is a beautiful pipe. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the surface of the briar to clean, preserve and polish the wood. The product works to really give new life to the briar and in this case the briar looked much better. I sanded out the scratches and marks in the stem surface with 320-3500 grit sanding pads. I wiped the stem down with a damp cloth after each sanding pad. It looked much better and really started to take on a shine.I polished the stem with micromesh sanding pads – wet sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it with Before & After Pipe Stem Polish – both Fine and Extra Fine. With the pipe cleaned up and ready to go I fitted the filter stem with a Medico Paper Filter and it fit precisely like the original WDC paper filters. I am excited to put the final touches on this interesting piece of American Pipe History found in Bellingham, Washington. It is a beautiful WDC Royal Demuth Filter Pat’d 1934 Shape 25 Apple shaped pipe. I put the pipe back together and buffed it with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax. I hand buffed the pipe with a clean buffing pad to raise the shine. It is fun to see what the polished bowl looks like with beautiful grain on the bowl sides, top and bottom. The polished black vulcanite stem combined with the bowl to make a stunning pipe. This older WDC Royal Demuth Filter Pipe is great looking and the pipe feels great in my hand. It is light and well balanced. Have a look at it with the photos below. The dimensions are Length: 5 ¾ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 40 grams/1.41 ounces. I will be adding it to the American Pipemakers Section of the rebornpipes store shortly. If you want to add it to your collection let me know. Thanks for walking through the restoration with me as I worked over this pipe. Thanks to each of you who are reading this blog. Bowl – finishing, Bowl – refinishing, bowl topping, Bowls – refinishing, buffing, finishing, fitting a new stem, micromesh sanding pads, WDC Pipes, WDC Royal Demuth apple 25, Royal Demuth Filter Apple 25 Pipe, pipe refurbishing, polishing, polishing a stem, polishing stems, refinishing, refurbishing,  stem work, vulcanite, waxing, waxing a stem, removing tooth marks, repairing bite marks, sanding a stem, stem work, polish a vulcanite stem, waxing, waxing a stem

Look at this stunning Sandblast Bank 133 Billiard

Leave a reply

Blog by Steve Laug

The next pipe on the work table is an interesting and classic looking sandblast Billiard. It is stamped on a smooth flat panel on the underside of the shank and reads BANK [followed by] Made in England [over] the shape number 133. It came from a lot we purchased from a seller on eBay on 03/21/2024 from an estate in Oregon City, Oregon, USA. It is classic shaped Sandblast Billiard with a vulcanite taper stem. The bowl has a thick cake and some lava overflow in the finish on the rim top and inner edge. The finish looked quite good in terms of wear and tear but there was grime and hand oils in the finish. The stem had an upper case “B” stamped on the left side of the taper. It is dirty and has light tooth chatter and marks on both sides ahead of the button. Jeff took photos of the pipe before he started his cleanup. He took photos of the pipe’s bowl and rim top to show the cake in the bowl and the lava coat overflowing onto the top. It is another dirty pipe. He also took photos to capture the tooth marks on the top and underside of the stem near the button. He took photos of the sides and the heel of the bowl to give a sense of the depth of the rugged sandblast around the bowl and shank sides. It really is a stunning blast that reminds of many of the English made sandblast pipes! Jeff took photos of the stamping on the heel of the bowl and it is clear and readable as noted above. The stamped “B” logo on the left side of the stem is in good condition, though lacking colour.I did some digging in my usual sources for the brand “BANK” and it was not listed on either Pipe Phil’s site or Pipedia. I learned nothing more about the BANK pipe. The shape number rang some bells for me. The 133 shaped Billiard sent me on a search of Google for that shape number and to see if I could link it to a brand. I found a lot of entries on the web that linked the 133 Billiard shape to GBD. I have worked on several GBD Billiards and at least one 133 Billiard (https://rebornpipes.com/2022/03/16/restoring-a-newer-gbd-london-made-c133-billiard/). The link takes you to a blog I wrote on a GBD 133 Billiard.

I also found a link to Smokershaven (https://www.smokershaven.com/gbd-estate-pipe-virgin-133-smooth-billiard-1960s/). It had another GBD 133 Billiard.

There were many other links to the same shape number and to GBD made pipes. Now I knew that that pipe was made by GBD and that the shape number 133 was for the GBD Billiard and thus the pipe in my hands was a GBD Made pipe.

I turned to work on the pipe itself. Jeff had done an amazing cleanup of the pipe. He reamed the cake with a PipNet reamer and cleaned up that with a Savinelli Fitsall Pipe Knife. He scrubbed the internals of the bowl and stem with alcohol, cotton swabs, pipe cleaners and shank brushes. He scrubbed the externals with undiluted Murphy’s Oil Soap and rinsed the bowl off with running water. He soaked the stem in Briarville’s Pipe Stem Deoxidizer and once it had soaked for awhile he rinsed it off with warm water to remove the residual solution. He dried it off and rubbed it down to remove any oxidation that was still on the stem. The pipe looked better when I received it. I took a photo of the rim top to show the condition. It looks good with the tars and oils removed from the rim top. The condition of the bowl and rim top were very good. The stem came out looking quite good with some light tooth marks and chatter on both sides ahead of the button. I took a photo of the underside of the shank to show the stamping. The stamping is very clear and reads as noted above. I also took the pipe apart and took a photo to give a sense of the shape of the Billiard.I started my work on the pipe by cleaning up the rim top with a brass bristle brush. I worked on it to remove the debris in the sandblast. It looked much better once I had finished. It was clean but dried out a bit so I wet it and checked and it looked much better.I rubbed the sandblast bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the briar with my fingertips and a shoe brush to clean, enliven and protect it. I let the balm sit for a little while and then buffed with a cotton cloth to raise the shine. Mark Hoover’s Balm is a product that I have come to appreciate and one I use on every pipe I have been working on. I set the bowl aside and turned my attention to the stem. I touched up the B logo stamp on the left side of the taper stem with white acrylic fingernail polish. I worked it into the stamp with a tooth pick. When it had dried I sanded off the excess with a 320 grit sanding pad. It looked very good.I sanded out the light tooth marks and the remaining oxidation with 320-3500 grit sanding pads. I wiped the stem down with a damp cloth after each sanding pad.I polished the stem with micromesh sanding pads – wet sanding it with 1500-12000 grit pads. I polished it further with Before & After Pipe Stem Polish – both fine and extra fine. I finished by wiping it down with Obsidian Oil and buffing it to a shine. I always look forward to this part of the restoration when all the pieces are put back together. I put the BANK Made in London 133 Sandblast Billiard back together and carefully buffed the stem with Blue Diamond on the buffing wheel. I gave the bowl multiple coats of Conservators Wax and the stem multiple coats of carnauba wax. I hand buffed the pipe with a soft cloth to raise the shine. It is fun to see what the polished bowl looks like with the black vulcanite taper stem almost glowing. This BANK Made in London 133 Billiard is nice looking and feels great in my hand. It is one that could be clenched and smoked while doing other things as it is very light weight and well balanced. It must have been a fine smoking pipe judging from the condition it was when I received it. Have a look at it in the photos below. The dimensions are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 1.13 ounces/32 grams. I will be putting it in the English Pipemakers Section of the rebornpipes store soon. This will make a great addition to someone’s pipe collection. Thanks to each of you who are reading this blog. Remember we are not pipe owners; we are pipemen and women who hold our pipes in trust until they pass on into the trust of the next pipeman or woman.

New Life for a Rusticated African Meerschaum Opera Pipe

Leave a reply

Blog by Steve Laug

The next pipe on the work table is a pipe that Jeff and I bought from an antique store on Victoria Day, May 4, 2024 in Bellingham, Washington, USA. It was one that came from an antique shop that I have visited for over 20 years and come to know the owner. We generally have a great chat on our visits and that day spent some time chatting and catching up on life. By the time we finished chatting and dickering we came away with five additional pipes to the hunt bag. These included a Savinelli Sherwood Rock Briar 316KS, a Sir Winston Bellingham WA, a Kensington Made in London England Pot, Genuine Block Meerschaum Opera pipe, and last of all an Oval shank 1/4 Bent pot Sir Winston’s Own with great grain. Great additions to the hunt bag (https://rebornpipes.com/tag/bellingham-pipe-hunt/).I decided to take a break from the pipes in my queue of pipes to work on and deal with the Meerschaum Opera Pipe shown above next. The rim top and shank end are smooth and are stained to match the browns and blacks of the bowl sides. The sides of the bowl and shank are rusticated with a finish that approximates a sandblast finish. It came out with a very tactile feeling. It is stained with black and brown stains that highlight the rustication valleys and high spots. The stem is a tapered vulcanite stem with a lot of oxidation on the surface. The tenon is a threaded metal tube that screws into the mortise. The pipe is stamped on the left side of the shank in a smooth panel and reads 9 Genuine Block [over] Meerschaum. It is clear and readable. The bowl had a thick cake in it a lava coat on the rim top and edges. The finish was dirty. The stem was a taper that sat against the shank end. It was dirty, oxidized, calcified and had tooth marks and chatter on both sides ahead of the button. I took some photos of the pipe before I started working on it. I took photos of the bowl, rim top to show the thickness of the cake in the bowl and the light lava coat on the rim top. The inner edge had some darkening and some build up of tars and oils. I took photos of the top and underside of the stem showing the light tooth marks and chatter on both sides near the button. It is quite oxidized and I could not see any stamping on the sides or top. You can also see the gap between the shank end and the stem end.I took a photo of the stamping on the left side of the shank. It was clear and readable. It read as noted above. I unscrewed the stem from the shank and the tenon came out of the shank. On previous pipes like this I have seen the threaded tenon in the shank end and then the stem was pushed on to it as a friction fit. This could possible explain the gap between the shank and the stem. I took a photo of the parts and it is a pretty looking meerschaum Opera pipe.Now I was ready to start the work on the pipe. I reamed the oval bowl with a Savinelli Fitsall Pipe Knife. I sanded the bowl walls with sandpaper wrapped my finger to smooth them out. The inside walls were clean and looked very good.I removed the tenon from the stem. I was surprised to see that the portion that sat in the stem was slotted and was made to be turned with a screw driver. This confirms what I thought regarding the threaded tenon being screwed into the shank and then the stem friction fit onto the smooth tenon end. I cleaned the threads on the tenon with pipe cleaners, cotton swabs and isopropyl alcohol followed by a brass bristle wire brush to remove the debris on the threads. Once cleaned I rubbed the threads down with some Vaseline to protect the threads and to make screwing it into the shank much easier.I screwed the tenon into the shank and turned it in fully with a screw driver. The fit against the shank end is snug and when I slipped the stem onto the tenon the gap was gone. I removed the tenon from the shank and cleaned out the mortise and airway in the tenon with alcohol, cotton swabs and pipe cleaners. I cleaned it until the pipe cleaners and cotton swabs came out clean. Once they were cleaned I cleaned the airway in the tenon and put it back in the shank. The bowl smelled clean. I set the bowl aside and cleaned out the airway in the stem and the button with pipe cleaners, cotton swabs and alcohol. I wanted the end that fit on the tenon to be very clean so that it would be a smooth fit.I polished the rim top and the aluminum tenon with micromesh sanding pads. I dry sanded with 1500-12000 grit pads and wiped both down between the pads with a damp cotton pad. The rim begn to shine and matched the colour of the bowl and shank end. The aluminum tenon became smooth with the scratches and nicks smooth out. I worked some Claphams Beeswax/Carnauba Wax into the surface of the bowl and shank with my fingertips and a horsehair shoe brush to clean, enliven and protect the smooth surfaces of the meerschaum. I let the wax dry for about 10 minutes and then buffed with a cotton cloth to raise the shine. The photos show the bowl at this point in the restoration process. I set the bowl aside and turned my attention to the stem. I scrubbed it with Soft Scrub all-purpose cleaner to remove the oxidation and calcification on the stem surface. I was beginning to look better. I sanded the oxidation, calcification, tooth marks and chatter smooth with 320-3500 grit sanding pads. I wiped the stem down after each sanding pad with a cloth impregnated with Obsidian Oil.I polished the stem with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it with Before & After Pipe Stem Polish – both Fine and Extra Fine. I gave it a final coat of Obsidian Oil. It looks significantly better! With the bowl and the stem finished I put the unique rusticated #9 Genuine Block Meerschaum Rusticated Opera Pipe back together and buffed it lightly on the wheel using Blue Diamond to give it a shine. I gave the stem multiple coats of carnauba wax on the wheel. I buffed the bowl with a horsehair shoe brush to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The carved surface of the bowl and shank is a great looking. The dimensions of the pipe are – Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ½ inches x 1 inch, Chamber diameter: ½ of an inch x ¾ of an inch. The weight of this large pipe is 1.31 ounces /37 grams. This Rusticated Meerschaum Opera Pipe is another great find. It is much more beautiful in person than these photos can capture. I will be adding it to the Meerschaum Pipe section of the rebornpipes store soon. If you want to add it to your collection it will make a fine smoking addition. This is another pipe that has the possibility of transporting the pipe man or woman back to a slower paced time in history where you can enjoy a respite. Thanks for walking through the restoration with me.

Restoring a 1914 BBB Pencil-Shank Billiard

Leave a reply

Blog by Kenneth Lieblich

For those of us who hunt for lost pipes, there are always peculiar tales of acquisition – but this one might be my most peculiar location of acquisition. A couple of weeks ago, my wife was out shopping with one of my daughters and they decided to go into an old-time ice cream parlour. While there, my wife spotted a jar for sale on the counter that read ‘Jar with parts + pipes’. That seemed quite odd for an ice cream joint, so she texted me the photo below and asked if I wanted it. It was very inexpensive, so I said, ‘Sure’. What an unusual spot for a jar of pipe parts!Well, there were some interesting bits and bobs in the jar – including a couple of items that particularly caught my eye. This lithe and comely pipe is one of them – and it will enter my pipe collection. As the title says, it is a 1914 BBB pencil-shank billiard with a sterling silver band and vulcanite, tapered, orific stem. How do I know it is from 1914? Well, let us take a closer look at that sterling silver band.Amidst the heavy tarnish, we can see three distinct marks. From left to right, they are an anchor, a lion passant, and a letter ‘P’. What do these marks mean? The anchor is the city mark and indicates the English city of Birmingham. The lion passant is the silver standard mark and indicates sterling – that is to say, 92.5% pure silver. The letter ‘P’ is the date letter and, as shown in the chart below, indicates the year 1914.That information was definitive in establishing a time period for the pipe. The other marks are perhaps slightly less helpful. The left side of the shank, the left side of the stem, and the silver band each have the recognizable logo of BBB inside a diamond shape. There are no other markings – although the absence of a model name etc. tells its own story. Read on. Let’s learn a bit about BBB. The article on Pipedia is bizarre insofar as the vast majority of the text is an egregious translation (from the French) of a good history of BBB on the Fumeurs de Pipe website. I speak French and the Babelfish translation that Pipedia uses is not helpful to anyone. I intend to make my own translation of that history one day. In the meantime, here is the non-translated text at the start of that article:

The initials once stood for Blumfeld’s Best Briars after Louis Blumfeld, who took over the management of the Adolph Frankau Company in 1856. After his death, the BBB gradually became known as Britain’s Best Briars. Soon to be the oldest English trademark in current use and the first pipe ever to have a registered trade mark. “Britain’s Best Briars”, often called BBB, is one of the oldest brands still in production and has always been the most popular foreign brand in Denmark. Earlier pipes included a metal rondel with a diamond shape including BBB imbedded in the stem top, and later post-Cadogan went to a stamped on logo, similar to the GBD pipes.

One detail that is of note from this time period of BBB pipes is that they only had two grades/models of pipe. One was ‘BBB Own Make’ (which later became BBB Best Make) and the other being simply ‘BBB’. This pipe is clearly in the latter category. Below is a page from a 1910 Harrods catalogue, showing some BBB pipes for sale. I have circled the one that most closely resembles the pipe I have and showed a close-up of it. Let us move on to the restoration. This pipe is 110 years old and I suppose it has fared well in that time. Certainly, I have seen much newer pipes in much worse condition. As I mentioned earlier, this stem is tapered, made of vulcanite, and concludes with an orific button. For more information on the orific button, please take the time to read Steve’s interesting article on the subject. As you can see, the stem is coated with calcification and oxidation. It has a few tooth marks, but nothing too serious. Sadly, however, the stem’s tenon has broken off inside the stummel’s mortise. More about the tenon in a bit. The stummel is in rougher shape. The wood shows wear and tear, including the odd nick and a significant gouge at the rim edge. The bowl is pretty thoroughly coated with cake and lava has erupted on to the rim. There is also some evidence of burned wood under that lava. I will have to excavate to learn more. Fortunately, this stummel does not look over-smoked (which was a real possibility), despite it clearly being a favourite of the previous owner. The sterling silver band (as you have already seen) is in fairly good physical condition, although it clearly has been heavily tarnished.I began my restoration of this pipe by cleaning the stem. I wiped it down with some oil soap on some cotton rounds in order to remove some calcification. I then cleaned the insides with pipe cleaners and 99% isopropyl alcohol. Although it was a bit dirty, it was much cleaner than I had expected after all these years.In order to address the oxidation, I dropped the stem in an oxidation removing fluid and left it to sit overnight. This mixture tends to draw the stem’s oxidation to the surface, where it can be more easily removed. When the stem was done soaking, I scrubbed the stem with some surface cleanser squirted on cotton rounds. This worked very well at removing the unsightly oxidation.I took a closer look at the diamond-shaped logo – it had been heavily worn over the past century or so. I hemmed and hawed about adding gold paint back to the logo on the stem. In the end I did it and figured that I can always remove later if I so desire.In my desire to keep original components wherever possible, I perfunctorily decided to not replace the tenon at this time. I knew that I could superglue it back in place – but I also knew that that would not hold in the long term, due to its poor shear strength. This would only be a cosmetic solution. Ultimately, however, I will replace the tenon at a later date. For now, I just want to see this thing restored!

In order to smooth and shine the beautiful black surface of the stem, I used my nine Micromesh pads to sand everything down gradually and delicately. For the last five of these pads, I also use some oil, both as a lubricant and as a method of inhibiting the return of oxidation. It is a lovely stem and it complements the stummel perfectly. On to the stummel – and my first task was reaming the cake out of the bowl. This was surprisingly challenging work, as the cake had become very hard over the years. There was a lot of debris and the narrowness of the bowl made it all the more tricky. I was also conscious of not wanting to crack the briar as I was doing this. In the end, a lot of carbonized material came out and the bowl remained perfectly intact. Next, I wanted to address the thick layer of lava on the rim. I put some oil soap in a shallow, plastic lid and soaked the rim in it for about a dozen minutes. This softened things up and I attacked it with a toothbrush. This allowed me to clean the rim very well, also using a piece of machine metal as a gentle scraping device. There was still damage, but it was much improved. As with the stem, I cleaned the insides of the stummel with pipe cleaners and 99% isopropyl alcohol. It was among the dirtiest pipes I have ever dealt with. Wow. The filth seemed as though it would never end. Obviously, it did at some point and I put the pipe down for a while – I was sick of seeing it!Of course, I came back to it and used some cleaner and tube brushes to scrub the insides clean. My efforts had not been in vain however, as the pipe looked so much better when I was done. I removed some of the burn marks on the rim with an aqueous solution of oxalic acid. I took some cotton swabs and rubbed and rubbed. The burns did improve but never fully disappeared. I took solace from the fact that the burns were superficial and did not affect the structural integrity of the wood. Alas, I neglected to take photographs of this step.

I also opted to leave the large wounds in the briar without filling them. They are part of this pipe’s long life and I am happy for them to remain as they are. The sanding will soften the edges of these wounds and that is sufficient. With that in mind, I set about sanding the stummel with my Micromesh pads. With each pad, the wood got smoother and the pipe got prettier. One product that always makes things better is the restoration balm that I use on the wood. It provides protection and revivification to the wood grain. I applied the stuff lightly but thoroughly, and then let it sit for 15 or 20 minutes. I then buffed it with a microfibre cloth and set it aside. What a beauty! After the Micromesh pads, but before the restoration balm, I cleaned up the sterling silver band. I worked very hard and very gingerly to remove the tarnish without damaging the antique silver. I reglued it in place, back on the shank, and finally buffed with my jewellery cloth.

Last step: off to my bench polisher! Here, I gave both the stem and stummel a thorough going over with the White Diamond compound and followed that up with a coat (only one this time) of carnauba wax. The pipe is absolutely beautiful and is truly reminiscent of an earlier time.All finished! This is a wonderfully crafted pipe and has a very jaunty feel to it. It took some work, but I am proud of it. It retains some wounds from battle, but, as Steve would say, they are part of this pipe’s story. This is one pipe that I am keeping for myself and adding to the ‘Lieblich Collection’. I am sure that I will be enjoying this one for many years to come. The approximate dimensions of the pipe are as follows: length 6 in. (153 mm); height 1½ in. (37 mm); bowl diameter 1 in. (27 mm); chamber diameter ⅔ in. (17 mm). The weight of the pipe is ⅝ oz. (18 g). I hope you enjoyed reading the story of this pipe as much I as I did restoring it. If you are interested in more of my work, please follow me here on Steve’s website or email me directly at kenneth@knightsofthepipe.com. Thank you very much for reading and, as always, I welcome and encourage your comments.

Restoring a Ropp Deluxe Octagonal Cherrywood 804

Leave a reply

Blog by Steve Laug

The next pipe on the work table is an interesting and classic looking Cherrywood pipe with smooth and bark covered panels. It is stamped on the heel of the bowl and reads Ropp in an oval [over] De Luxe [over] France [over] 804 the shape number. It came from a lot we purchased from a seller on eBay on 03/21/2024 from an estate in Oregon City, Oregon, USA. It is very well shaped octagonal bent poker with a vulcanite taper stem. The bowl has a thick cake and some lava overflow on the rim top and bevelled inner edge. The finish looked quite good in terms of no tears or worn spots in the bark portions of the finish. It is dirty with grime and hand oils in the finish. The stem had a silver Ropp oval inset on the left side of the taper. It is dirty and has tooth chatter and tooth marks on both sides ahead of the button. Jeff took photos of the pipe before he started his cleanup. He took photos of the pipe’s bowl and rim top to show the cake in the bowl and the lava coat overflowing onto the top. It is another dirty pipe. He also took photos to capture the tooth marks on the top and underside of the stem near the button. He took photos of the sides and the heel of the bowl to give a sense of bark and smooth portions of the finish. There are some paint flecks on the finish but it still is a beauty! Jeff took photos of the stamping on the heel of the bowl and it is clear and readable as noted above. The metal inserted Ropp logo on the left side of the stem is in good condition. I wanted to refresh my memory on the brand so I turned for a short, quick summary to Pipephil (http://www.pipephil.eu/logos/en/logo-ropp.html). I have included the pertinent information from that site below:

Brand created by Eugène-Léon Ropp (1830 – 1907) and continued throughout 3 generations. “GBA Synergie” run by Bernard Amiel (†2008) bought back Ropp in 1988 and owned it until 1991. The company was taken over by Cuty-Fort Entreprises (Chacom, Vuillard, Jean Lacroix…) in 1994.

I also turned to Pipedia to see if there was any additional information that would be helpful (https://pipedia.org/wiki/Ropp). I quote the portion of the article on the Cherrywood pipes.

Eugène-Léon Ropp (1830 – 1907) had acquired a patent for a cherrywood pipe (wild cherry, lat.: Prunus avium) in 1869. In 1870 he established a workshop to manufacture such pipes in Büssingen (Bussang, Vosges mountains). Around 1893 the business moved into the former mill of Sicard (part of the community of Baume-les-Dames – Département Doubs, Upper Burgundy – from 1895 on)… Even though cherrywood pipes were the mainstay of Ropp until the company finally closed down in September 1991. The company was taken over by Cuty-Fort Entreprises (Chacom, Jeantet, Vuillard, Jean Lacroix…) in 1994.

The pipe thus was made in France sometime prior to the closure in 1991. It is made from wild cherry and was a specialty of Ropp. I have worked on quite a few over the years but I had forgotten all the dates and information. Now it was time to work on the pipe.

I turned to work on the pipe itself. Jeff had done an amazing cleanup of the pipe. He reamed the cake with a PipNet reamer and cleaned up that with a Savinelli Fitsall Pipe Knife. He scrubbed the internals of the bowl and stem with alcohol, cotton swabs, pipe cleaners and shank brushes. He scrubbed the externals with undiluted Murphy’s Oil Soap and rinsed the bowl off with running water. He soaked the stem in Briarville’s Pipe stem Deoxidizer and once it had soaked rinsed it off with warm water to remove the residual solution. He dried it off and rubbed it down to remove any oxidation that was still on the stem. The pipe looked better when I received it. I took a photo of the rim top to show the condition. It looks good with the tars and oils removed from the rim top. The condition of the bowl and rim top were very good. The stem came out looking quite good with some light tooth marks and chatter on both sides ahead of the button. I took a photo of the heel of the bowl to show the stamping. The stamping is very clear and reads as noted above. I also took a photo of the logo insert on the left side of the taper stem.I carefully took the pipe apart. The shank and stem unscrewed as a single unit from the bowl. I checked the fit of the stem in the shank and from my memory of other Ropp pipes I was pretty certain it was a push stem. I removed the stem from the shank and took a photo of the pipe parts to show what I was working with. Everything looked good both inside the mortise and on the tenon. It is a well shaped and was a nice looking pipe.With the bowl and shank cleaned it was time to put those parts back together. I have learned that the threaded tenons on the Cherrywood work better when lubricated with some Vaseline Petroleum Jelly. It makes it easy to turn them together without damaging or cracking the shank or bowl. I screwed it into the bowl and took photos of the pipe at this point. I wet sanded the rim top and the smooth portions on the bowl sides with micromesh sanding pads – 1500-12000 grit sanding pads. I wiped the bowl surface down with a damp cloth after each sanding pad to remove the sanding dust. Once I finished the bowl looked good. I rubbed the Cherrywood bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the Cherrywood with my fingertips to clean, enliven and protect it. I let the balm sit for a little while and then buffed with a cotton cloth to raise the shine. Mark Hoover’s Balm is a product that I have come to appreciate and one I use on every pipe I have been working on. I set the bowl aside and turned my attention to the stem. I sanded out the light tooth marks and the remaining oxidation with 320-3500 grit sanding pads. I wiped the stem down with a damp cloth after each sanding pad.I polished the stem with micromesh sanding pads – wet sanding it with 1500-12000 grit pads. I polished it further with Before & After Pipe Stem Polish – both fine and extra fine. I finished by wiping it down with Obsidian Oil and buffing it to a shine.  I always look forward to this part of the restoration when all the pieces are put back together. I put the Ropp De Luxe Cherrywood 804 back together and carefully buffed the stem with Blue Diamond on the buffing wheel. I gave the bowl multiple coats of Conservators Wax and the stem multiple coats of carnauba wax. I hand buffed the pipe with a soft cloth to raise the shine. It is fun to see what the polished bowl looks like with the smooth Cherrywood set off by the strips of bark contrasting well with the black vulcanite stem almost glowing. This Ropp De Luxe 804 Cherrywood is nice looking and feels great in my hand. It is one that could be clenched and smoked while doing other things as it is very light weight and well balanced. It must have been a fine smoking pipe judging from the condition it was when I received it. Have a look at it in the photos below. The dimensions are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 2 inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 2.57 ounces/73 grams. I will be putting it in the French Pipemakers Section of the rebornpipes store soon. This will make a great addition to someone’s pipe collection. Thanks to each of you who are reading this blog. Remember we are not pipe owners; we are pipemen and women who hold our pipes in trust until they pass on into the trust of the next pipeman or woman.

Rebirthing a worn and obviously favourite 1976 Dunhill Shell 341 Apple

Leave a reply

Blog by Steve Laug

The next pipe on the work table is a lovely Dunhill small sandbast apple shaped briar pipe. It is similar in terms of shape number and finish to another apple I recently worked on but it is definitely more worn (https://rebornpipes.com/2024/05/26/restoring-a-1976-dunhill-shell-341-apple-a-beautiful-sandblast-pipe/). It also came from our contact in Copenhagen, Denmark on 02/02/2024. It is a classic Dunhill Sandblast Apple shaped bowl. It has a sandblast, rich brown stained bowl that really highlights the grain in the briar. The worn sandblast bowl is dirty with grime in the finish. There are also some flecks of white paint in the grooves of the sandblast. The bowl had been recently reamed but there was still lava in the blast on the rim top and the inner edge of the bowl. The stamping on the pipe is faint but still readable on the underside of the shank. It reads 341 (the number is worn but I believe it is a 341) the shape number [followed by] Dunhill Shell [over] Made in England the date number 16 is stamped after the D in England. The stem had a white spot on the top side of the taper. It is oxidized, calcified and has tooth chatter and tooth marks on both sides ahead of the button. Jeff took photos of the pipe before he started his cleanup. He took photos of the pipe’s bowl and rim top to show the cake in the bowl and the dark spots and the lava coat overflowing onto the top. It is another dirty pipe. He also took photos to capture the tooth marks on the top and underside of the stem near the button. He took photos of the sides and the heel of the bowl to give a sense of the sandblast finish on this one. Even under the grime and wear on the finish the blast is quite beautiful. Jeff took photos of the stamping on the underside of the shank. It is faint but still readable. It helps to have worked on a Dunhill Shell Briar 341 Apple previously as it gives some clarity to otherwise faint stamping. The shape number on this one is worn but the tails on the numerals match those on the previous one I worked on. The date stamp is also worn but again the tails and curves on the numbers match the previous one exactly. I wanted to unpack the Dunhill stamping on the shank and work to understand each element of the stamp. I generally use the Pipephil site to gather as much initial information as possible (http://pipephil.eu/logos/en/dunhill/shell-briar1.html). The stamping is interpreted as follows: The number 341 is the shape number for a taper stem Apple. The Shell Briar stamp refers to the finish. The number 16 following the D of England would give the date the pipe. The photo below is of the stamping on a Don shape but the stamping is similar on this one.Pipephil also has some helpful dating keys on the site that are basically flow charts that you can walk through to date your pipe (http://pipephil.eu/logos/en/dunhill/cledat-en1.html). I turned to Part 1 of the Dating Key and followed the chart. This pipe has 16 following the D in England. There was no patent number so that took me to the section on the chart below (column one) which instructed me that the pipe could be dated as being made “posterior to 1954”. I followed the link under “Your pipe is posterior to 1954. Narrow down your dating”. That took me to Page 2 of the dating key (http://pipephil.eu/logos/en/dunhill/cledat-en1a.html). The second column (suffix 1…4) or (11…39) led me to the section with 16 after the D in England. There was a directive for dating the pipe spelled out as follows: 1960 + suffix 16 which gives the pipe a date of 1976.I then turned to Pipedia’s section on Dunhill Shell Briar to get a bit of background on the Dunhill finishes (https://pipedia.org/wiki/Dunhill#Root_Briar). I quote:

Shell

A deep craggy sandblast with a black stain finish (usually made using Algerian briar) – the color of the stain used has varied over the years. Although there is some doubt as to them being the first to sandblast pipes, Dunhill’s Shell pipes, and the sandblasting techniques developed to create them are considered one of Dunhill’s greatest and most lasting contributions to the art of pipe making.

The documented history of Dunhill’s inception of the Shell is largely limited to patent applications — there are no catalog pages or advertisements promoting blasted pipes at the time. The preliminary work on the English patent (No. 1484/17) was submitted on October 13, 1917. The patent submission was completed half a year later, on April 12, 1918, followed by the granting of the English patent on October 14, 1918. This was less than a month before the end of The Great War on November 11th.

In 1986 Dunhill released a line of premium Shell finish pipes – “RING GRAIN”. These are high-quality straight grain pipes which are sandblasted. Initially only Ring Grain, but now in two different finishes. In 1995 the “Shilling” was introduced with Cumberland finish – it is an extremely rare series. These pipes exhibit a deeper blast characteristic of that of the 1930’s – mid-1960’s (and the limited ‘deep blast’ pipes of the early 1980s) and show a fine graining pattern. These are considered the best new Dunhills by many enthusiasts today and are very rare. The finish is sometimes described as tasting like vanilla at first, with the taste becoming more normal or good as the pipe breaks in.

I turned to work on the pipe itself. Jeff had done an amazing cleanup of the pipe. He reamed the cake with a PipNet reamer and cleaned up that with a Savinelli Fitsall Pipe Knife. He scrubbed the internals of the bowl and stem with alcohol, cotton swabs, pipe cleaners and shank brushes. He scrubbed the externals with undiluted Murphy’s Oil Soap and rinsed the bowl off with running water. There was still some general darkening on the rim top that would need to be worked on. He soaked the stem in Briarville’s Pipe stem Deoxidizer and once it had soaked rinsed it off with warm water to remove the residual solution. He dried it off and rubbed it down to remove any oxidation that was still on the stem. The pipe looked very good when I received it. I took a photo of the rim top to show the condition. It looks good with the tars and oils removed from the rim top though there is still some darkening. The inner edge of the bowl was in excellent condition though there was some wear on the front inner and outer edge. The bowl itself was very clean. The stem came out looking quite good with light tooth marks and chatter on both sides ahead of the button. I took a photo of the underside of the shank to show the stamping. The photo shows the stamping and is actually more readable in person. I removed the stem from the shank and took a photo of the pipe parts to show what I was working with. The shape is a classic apple.I started my work on this pipe by addressing the darkening on the rim top. I began by working over the rim top with a brass bristle wire brush to remove the grime in the sandblast finish. It looked better but I still needed to do some work on the darkening of the rim top. I then scrubbed the rim top with some of Mark Hoover’s Before & After Briar Cleaner. I worked it into the rim top and edge of the bowl with my finger tips. I let it set for a few moments then scrubbed it off with cotton pads. Each step made it look better but still the top was too dark to my liking. I wiped it off again with some acetone on a cotton pad and finally I could see the briar with the brown tone of the stain. The rim top showed some burn damage to the top that was not completely removable. There was some damage on the front outer edge where the pipe had been knocked out. I rubbed the briar down with Before & After Restoration Balm. I worked it into the surface with my fingertips and a horsehair shoe brush to work it into the nooks and crannies of the sandblast finish. The product works to clean, enliven and preserve the briar. I let it sit for 10 minutes then I buffed it with a cotton cloth to deepen the shine. The pipe really comes alive with the balm. The rim top damage is visible in the photos below especially to the front outer edge of the bowl. I sanded the stem with 320-3500 grit sanding pads. I wiped it down after each sanding pad with a damp cloth. By the final 3500 grit sanding pad the stem had a had a shine.I polished the vulcanite with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This 1976 Dunhill Shell Briar 341 Apple with a vulcanite taper stem has a beautiful, unique Dunhill Sandblast finish that is very deep and craggy. The Shell Briar mixed brown finish highlights some great grain around the bowl and shank. It has a unique sandblast that Dunhill specialized in making. The polished vulcanite taper stem adds to the mix. I put the stem back on the bowl and buffed the pipe with Blue Diamond on the buffing wheel being careful to not buff the stamping. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing it with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Dunhill Shell Briar 341 Apple is quite nice and feels great in the hand. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¼ inch, Chamber diameter: ¾ of an inch. The weight of the pipe is .95 ounces/.27 grams. Thanks for walking through the restoration with me as I worked over another beautiful pipe. This one will be going on the rebornpipes store in the English Pipe Makers Section. Thanks for your time.

Breathing Life into a Challenging Dunhill Shell Briar 126 Billiard

Leave a reply

Blog by Steve Laug

The next pipe on the work table is a lovely Dunhill small sandblast Billiard shaped briar pipe. We purchased it from our contact in Copenhagen, Denmark on 01/22/2024. It is a classic Dunhill Sandblast Billiard shaped bowl. It has a sandblast, rich brown stained bowl that really highlights the grain in the briar. The bowl is dirty with grime in the finish. There also appears to be a shiny varnish coat over the grime in the sandblast. There appears to be a varnish coat on the stem as well. The bowl has a moderated cake and a light lava overflow on the sandblast rim top and edges. The stamping on the pipe is clear and readable and on the under side it reads 126 the shape number [followed by] Dunhill [over Shell Briar. That is followed by Made in England the superscript date number 0 is stamped after the D in England. There is a circle #S following the date stamp that identifies the pipe as a group 3 sized pipe in a Shell finish. The stem had a white spot on the top side of the taper. It is lightly oxidized and has tooth chatter and deep tooth marks on both sides ahead of the button. Jeff took photos of the pipe before he started his cleanup. He took photos of the pipe’s bowl and rim top to show the cake in the bowl and the lava coat overflowing onto the top. It is another dirty pipe. You can see the shiny coat on top of the finish and the grime in the photos. He also took photos of the stem to capture the tooth marks on the top and underside near the button. He took photos of the sides and the heel of the bowl to give a sense of the sandblast finish on this one. Even under the grime and shiny varnish coat in the grooves the blast is quite beautiful. Jeff took photos of the stamping on the underside of the shank. It is clear and readable though it is faint in some spots. I wanted to unpack the Dunhill stamping on the shank and work to understand each element of the stamp. I generally use the Pipephil site to gather as much initial information as possible (http://pipephil.eu/logos/en/dunhill/shell-briar1.html). The stamping is interpreted as follows: The number 126 is the shape number for a taper stem Billiard. The Shell Briar stamp refers to the finish. The underlined, superscript number 0 following the D of England would give the date the pipe. The circle 3S tells me that the pipe is a group 3 sized pipe and the S is for the Shell finish. The photo below is of the stamping on a Don shape but the stamping is similar on this one.Pipephil also has some helpful dating keys on the site that are basically flow charts that you can walk through to date your pipe (http://pipephil.eu/logos/en/dunhill/cledat-en1.html). I turned to Part 1 of the Dating Key and followed the chart. This pipe has 16 following the D in England. There was no patent number so that took me to the section on the chart below (column one) which instructed me that the pipe could be dated as being made “posterior to 1954”. I followed the link under “Your pipe is posterior to 1954. Narrow down your dating”. That took me to Page 2 of the dating key (http://pipephil.eu/logos/en/dunhill/cledat-en1a.html). The first column (0) led me to the next section with a question whether the suffix is smaller and raised. Since the 0 after the D in England the date of the pipe spelled is 1960. I then turned to Pipedia’s section on Dunhill Shell Briar to get a bit of background on the Dunhill finishes (https://pipedia.org/wiki/Dunhill#Root_Briar). I quote:

Shell

A deep craggy sandblast with a black stain finish (usually made using Algerian briar) – the color of the stain used has varied over the years. Although there is some doubt as to them being the first to sandblast pipes, Dunhill’s Shell pipes, and the sandblasting techniques developed to create them are considered one of Dunhill’s greatest and most lasting contributions to the art of pipe making.

The documented history of Dunhill’s inception of the Shell is largely limited to patent applications — there are no catalog pages or advertisements promoting blasted pipes at the time. The preliminary work on the English patent (No. 1484/17) was submitted on October 13, 1917. The patent submission was completed half a year later, on April 12, 1918, followed by the granting of the English patent on October 14, 1918. This was less than a month before the end of The Great War on November 11th.

In 1986 Dunhill released a line of premium Shell finish pipes – “RING GRAIN”. These are high-quality straight grain pipes which are sandblasted. Initially only Ring Grain, but now in two different finishes. In 1995 the “Shilling” was introduced with Cumberland finish – it is an extremely rare series. These pipes exhibit a deeper blast characteristic of that of the 1930’s – mid-1960’s (and the limited ‘deep blast’ pipes of the early 1980s) and show a fine graining pattern. These are considered the best new Dunhills by many enthusiasts today and are very rare. The finish is sometimes described as tasting like vanilla at first, with the taste becoming more normal or good as the pipe breaks in.

I turned to work on the pipe itself. Jeff had done an amazing cleanup of the pipe. He reamed the cake with a PipNet reamer and cleaned up that with a Savinelli Fitsall Pipe Knife. He scrubbed the internals of the bowl and stem with alcohol, cotton swabs, pipe cleaners and shank brushes. He scrubbed the externals with undiluted Murphy’s Oil Soap and rinsed the bowl off with running water. His scrubbing removed the majority of the varnish on the bowl with just a few spots remaining. He soaked the stem in Briarville’s Pipe stem Deoxidizer and once it had soaked rinsed it off with warm water to remove the residual solution. He dried it off and rubbed it down to remove any oxidation that was still on the stem. The soak did not penetrate the varnish on the stem at all but it certainly looked better. Other than the shiny spots in the finish where the varnish remained, the pipe looked very good when I received it. I took a photo of the rim top to show the condition. It looks good with the tars and oils removed from the rim top. You can see the shiny spots of varnish remaining on the right front side of the rim top in the first photo below. The inner edge of the bowl was in excellent condition. The bowl itself was very clean. The stem came out clean but the varnish coat discoloured the white spot and gave the whole stem an artificial shine that hid the tooth marks and chatter underneath.I took a photo of the underside of the shank to show the stamping. The photo shows the stamping and is actually more readable in person. I removed the stem from the shank and took a photo of the pipe parts to show what I was working with. I think once the varnish is removed the pipe will be a nicer looking piece.I decided to use some of Mark Hoover’s Before & After Briar Cleaner to see if it would break through the remaining shiny spots of varnish in the grooves of the sandblast on the rim top and around the bowl. I shook up the mixture to make sure all was blended then used a tooth brush to work it into the surface of the briar. I worked it until is foamed then rinsed it off with warm water and dried it with a soft cloth. It did the job and the shiny varnish had vanished! I set the bowl aside and let the briar dry out completely then I rubbed it down with Before & After Restoration Balm. I worked it into the surface with my fingertips and a horsehair shoe brush to work it into the nooks and crannies of the sandblast finish. The product works to clean, enliven and preserve the briar. I let it sit for 10 minutes then I buffed it with a cotton cloth to deepen the shine. The pipe really comes alive with the balm. I sanded the stem with 320-3500 grit sanding pads to remove the varnish coat that covered it. I wiped it down after each sanding pad with a damp cloth. By the final 3500 grit sanding pad the stem had a more normal shine and the varnish, tooth marks and chatter were gone.I polished the vulcanite with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This 1960 Dunhill Shell Briar 126 Billiard with a vulcanite taper stem has a beautiful, unique Dunhill Sandblast finish that is very deep and craggy. The Shell Briar mixed brown finish highlights some great grain around the bowl and shank. It has a unique sandblast that Dunhill specialized in making. The removal of the varnish left a depth to the briar and a clearness to the stem surface. The polished vulcanite taper stem adds to the mix. I put the stem back on the bowl and buffed the pipe with Blue Diamond on the buffing wheel being careful to not buff the stamping. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing it with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Dunhill Shell Briar 126 Billiard is quite nice and feels great in the hand. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 1.09 ounces/31 grams. Thanks for walking through the restoration with me as I worked over another beautiful pipe. This one will be going on the rebornpipes store in the English Pipe Makers Section. Thanks for your time.

A Pipe Hunt Find in Bellingham – An Israeli Made Pedestal Pipe

Leave a reply

Blog by Steve Laug

On our recent Victoria Day Weekend (5/18/24) my family met Jeff and his wife in Bellingham for breakfast, a visit and a bit of pipe hunting. We visited three of my favourite antique malls and worked out way through the aisles of wares for sale. Jeff and I tend to divide and conquer, each walking through the aisles looking for pipes. The rest of the family moves through looking for their own treasures. The second shop we visited is a treasure trove of items from the past and one that I could spend a lot of time working through. As we went through the aisles of treasures I found a case with carved animal pipes and a Ropp Cherrywood, really none of them captured my interest this time around. I looked them over and set them aside. Then I saw an interesting pipe standing in the back of the case. It was called The Pedestal Pipe and was made in Israel – presumably by the Shalom Pipe Manufacturing company. We left the shop with this addition to the hunting bag (https://rebornpipes.com/tag/bellingham-pipe-hunt/).I decided to take a break from the pipes in my queue of pipes to work on and deal with the Pedestal Pipe shown above next. It was an interesting shape stands on its own – like a pipe on a pedestal. It had some nice grain under the grime and varnish coat on the bowl and shank. The pipe is stamped on the left side of the shank and reads The Pedestal [arched over] Pipe. On the right side it is stamped and reads Mediterranean [over] Briar Israel. Here is what I saw. The bowl had a thick cake in it a thick lava coat on the rim top and edges. The finish was spotty with varnish or some shiny coat that was peeling around the bowl. The stem was fancy and there was a round saddle portion that sat against the shank end. The blade of the stem was flattened and had panel sides. It was dirty and had tooth marks and chatter on both sides ahead of the button. I took some photos of the pipe before I started working on it. I took photos of the rim top and stem to show the general condition of the pipe. The bowl is heavily caked and the rim top and edges have a heavy coat of lava overflowing on to them. There is some burn or reaming damage on the inner edge of the bowl. The stem is oxidized, calcified and has tooth marks and chatter on both sides ahead of the button.I took photos of the stamping on the sides of the shank. You can see it is readable and in person looks much better with a light and lens. I removed the stem from the shank and took a photo of the parts to show the look of the pipe. I decided to do some digging on the net about the brand. I turned first to Pipephil’s site to see what I could find. I could not find any link to the Pedestal line from Israel but I turned to the section on the site for Alpha pipe (also made by Shalom Pipe Factory). Here is the link to the Alpha section (http://www.pipephil.eu/logos/en/logo-a4.html). I did a screen capture of the section on the pipes. The third pipe in the photo below has an identical stem to the Pedestal Pipe that I am working on. This ties the brand to Alpha at some level and even more to Shalom Pipe Factory.With that information I turned to Pipedia and looked up the information on the Shalom Pipe Factory (https://pipedia.org/wiki/Shalom_Pipe_Factory). I quote the information from the site below. I have highlighted the Pedestal link in the article.

Not much is known about Israel’s sole pipe factory though it’s reported to have operated quite successfully on international markets.

Beside the brand “Shalom” the mainstay brand was Alpha – especially well known in the USA. Alpha was popular for a range of fresh and unusual shapes. Series (afaik): Caprice (s), Citation (s), Classic (b), Pedestal (s), Regent, Region (b), Rex (s). (1)

(1) (b) = blasted, (s) = smooth…

Alpha also produced at least one of its Citation forms for Carey’s “Magic Inch” series.

Mentioned in context with Shalom Pipe Factory was a Danish pipemaker named ‘Muki Liebermann’, who later lived and worked in the USA. Muki is known for his unique briar bending technique and his original shapes that gave inspiration to many of the most praised Danish pipemakers.

Shalom was taken over by Robert L. Marx of New York City, later Sparta, NC, then of Mastercraft. Mastercraft continued the Alpha pipes introducing new lines.

I did a Google search for the The Pedestal Pipe and came up with a few links that I followed up on. The best of them was a link to a thread on Pipesmagazine forum to a discussion on a pipe very much like this one (https://pipesmagazine.com/forums/threads/unique-original-sitter-pipe-designs.25944/). I quote the starting post in the thread below:

I liked this pipes unique design as a sitter and the briar doesn’t look too shabby. I’m guessing this came from the Shalom Pipe Factory and made by Muki Liebermann since he was known for his unique briar bending technique and original shapes.

The only stamping found is ‘THE PEDESTAL PIPE’ and ‘Mediterranean Briar Israel’. I’ve searched the internet and cannot find any information on this pipe other than what I have mentioned. Been smoking it for the past week and it’s an excellent smoker.
Feel free to post images of your sitters!! Love to see them.

Now I was ready to start the work on the pipe. I wiped the bowl down with acetone to remove the spotty shiny coat on the pipe. It took a few wipe downs to remove it but once finished it definitely was better. Interestingly there was some red dye under the shiny coat that came off as well. I moved on to work on the internals of the pipe. I reamed the bowl with a PipNet pipe reamer to take the cake back to bare briar. I took the cake back to bare briar and cleaned up the remnants of the cake with a Savinelli Fitsall Pipe Knife. I sanded the bowl walls with sandpaper wrapped around a piece of briar to smooth them out. The inside walls were clean and there was no sign of burning or checking on them. I scrubbed the inside of the shank and the airway in it and the stem with pipe cleaners, cotton swabs and isopropyl alcohol. Once it was clean it smelled much better was ready for the next steps in the process.I scrubbed the externals of the bowl and shank with undiluted Murphy’s Oil Soap and a tooth brush to remove the grime in the finish. I rinsed the bowl off with warm water. I scrubbed the internals with shank brushes and soap to remove the grime inside. I was able to remove a lot of the lava on the rim top as well. The bowl was beginning to look much better at this point. I sanded the bowl with sanding pads – sanding with 320-3500 grit pads and wiped down with a damp cloth after each sanding pad. The bowl began to take on a real shine. It was going to be a beautiful pipe. I polished the briar with micromesh sanding pads – dry sanding with 1500-12000 grit pads and wiping the bowl down after each sanding pad. The grain really began to shine through. It is a beautiful pipe. The polishing of the rim top and inner edge brought the rim top colour to match the rest of the bowl. I worked some Before & After Restoration Balm into the surface of the briar with my fingertips to clean, enliven and protect the briar. I let the balm sit for 15 minutes and then buffed with a cotton cloth to raise the shine. The photos show the bowl at this point in the restoration process. I set the bowl aside and turned to address the stem issues. I “painted” the surface of the stem with the flame of a Bic lighter. I was able to lift the marks on the stem top leaving light marks but the ones on the bottom side were much deeper and the flame lifted them slightly but they still remained. I filled in the marks that remained with clear CA glue. Once the repair cured I flattened the repair with small files. It looked much better. I cleaned up the repairs with a folded piece of 220 grit sandpaper. I was able to flatten them and blend them in very well with the surface of the vulcanite. Before continuing with the sanding process, I heated the stem with my lighter to soften the vulcanite and bent it to match the flow of the bowl. It looked much better with the proper bend.I sanded out the scratches and marks in the stem surface with 320-3500 grit sanding pads. I wiped the stem down with a damp cloth after each sanding pad. It looked much better and really started to take on a shine.I polished the stem with micromesh sanding pads – wet sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it with Before & After Pipe Stem Polish – both Fine and Extra Fine. I am excited to put the final touches on this interesting Israeli Made pipe by Muki Liebermann of the Shalom Pipe Factory. It is a beautiful and uniquely shaped pipe called The Pedestal Pipe. I put the pipe back together and buffed it with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax. I hand buffed the pipe with a clean buffing pad to raise the shine. It is fun to see what the polished bowl looks like with beautiful grain on the bowl sides, top and bottom. The polished black vulcanite, newly fitted stem combined with the bowl to make a stunning pipe. This smooth The Pedestal Pipe is great looking and the pipe feels great in my hand. It is light and well balanced. Have a look at it with the photos below. The dimensions are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: 7/8 of an inch. The weight of the pipe is 56 grams/1.98 ounces. I will be adding it to the Pipes By Various Makers Section of the rebornpipes store. If you are interested in adding it to your collection let me know. Thanks for walking through the restoration with me as I worked over this pipe. Thanks to each of you who are reading this blog.