Tag Archives: Kaywoodie History Links

Restoring a Badly Burned Kaywoodie Super Grain 86B


Blog by Alex Heidenreich

Earlier this week I received and email with an attachment from Alex about a Kaywoodie pipe he had restored for a friend. He wanted my opinion on the restoration and on the piece he had written about it. I took time this weekend to read over the piece and study the photos and I have to say I was quite impressed with his work. I wrote him back with some questions and asked if I could post his piece on the blog. He said he was thrilled and honoured to be asked so without further ado I introduce you to Alex Heidenreich’s Kaywoodie Super Grain 86B restoration.

Introduction:

Kaywoodies are some of my favorite pipes. I love the history of the company and the amazing quality briar used in the older pipes. So, when I saw this poor Kaywoodie on eBay, I was quick to bid on it. When it arrived in the mail, I took a closer look at it. It was in even worse shape than the pictures had led me to believe. It was dented and dinged on the outside of the bowl. The rim was badly chewed up and then caked over with a thick coating of lava that had spilled all the way down onto the shank. The stem was badly oxidized, and I couldn’t get a pipe cleaner through the stem or the shank. This pipe looked like a lot of work. So, I ended up setting it aside for a while. Later, a friend of mine from our pipe group on PipeTobaccoDiscord said he was looking to add a Kaywoodie to his collection. I sent him some pictures of the ones in my restoration pile and despite the damage, he fell in love with this one, and thus the work began.

Acquisition Pictures: History:

As Steve has talked about many times, finding the exact date of a pipe can be difficult. Kaywoodie has a rich history, and a good amount of it is documented over on https://pipedia.org/wiki/Collector%27s_Guide_to_Kaywoodie_Pipes. The first thing I did was head over to their documentation on the shape numbers: https://pipedia.org/wiki/Kaywoodie_Shape_Numbers. This told me that the 86B shape number was a Large Apple with a flat top bowl and was produced from 1947-1971. For many shapes of Kaywoodies, the logo was printed on top of the stem until the late 1940s or early 1950s. Since this logo was on the side of the stem, I surmised it was probably a post-1955 model. Just after this time (somewhere in the mid-50s or 60s), Kaywoodie also moved from a 4-hole stinger to a 3-hole stinger. Since this pipe has the logo on the side, but still had a 4-hole stinger, it was likely made in that interim period from 1959-1965.

Picture from a 1955 Catalog showing the 86B (notice the logo is on the top of the stem)Picture from: https://pipedia.org/wiki/Collector%27s_Guide_to_Kaywoodie_Pipes courtesy ChrisKeene.com

Restoration:

I took the pipe apart to see how bad it was. It was extremely dirty, and the finish was badly damaged. There were burn marks and lava all over the rim and shank.

I started by reaming the pipe. The bowl is large. So, it took a lot of reaming to get clean. The outside was extremely dirty. So, I cleaned the pipe 4 or 5 times with Murphy’s Oil Soap. I really soaked the rim well to try to soften the lava. It took a ton of scrubbing and a little work with a knife, but I was able to get most of it off and remove a lot of the burn marks on the shank. Unfortunately, this revealed a great deal of damage to the rim. There were also multiple fills, and I even had to remove a protruding grain of sand from the briar. To repair the damage to the rim, I carefully sanded back the damaged areas on a topping board, careful not to change the shape of the rim. I put a dab of Vaseline on the logo to protect it, then soaked the stem in an oxyclean bath. This would help loosen up all the gunk inside and make it easier to clean the oxidation off the outside. I also filled the bowl with cotton balls, stuck pipe cleaners in the shank, and then used a syringe to fill the bowl with alcohol to help remove any ghosting in the pipe, as well as loosen up any remaining cake inside the bowl to make it easier to clean.   After I got the stem out of the oxy bath, it revealed a lot of oxidation that would need to be cleaned up. The internals of the stem were also gooped up, but I was able to now force a pipe cleaner through it. I cleaned much of the surface oxidation with a Magic Eraser, then moved on to the internals.I sanded the stem with 600, 800, 1000, then moved into micro mesh pads from 1200 – 12000. Once finished, I oiled the stem with Obsidian Stem Oil and let it soak in. I turned my attention back to the bowl and did my best to clean out the inside of the shank and bowl with Q Tips and Pipe Cleaners soaked in alcohol. Then I set it aside for day 1.

Cleaning the shank and the stem took A LOT of pipe cleaners and Q Tips… After letting the pipe dry over night, I was able to see more clearly the inside and outside of the pipe. No surprise with how burned the outside of the pipe was that there were also heat fissures inside the bowl. I inspected them carefully and gauged their depth with dental picks. They, luckily, were not too deep. I was also now able to see some of the fills, scratches, and sand pits better on the outside of the bowl. I used a wet rag and a hot iron to try to raise them a bit. Then I carefully cleaned them out with my dental picks. At this point, I got a little ahead of myself as I focused on cleaning out the pits. I moved on to filling the pits and scratches with CA glue before fully stripping the finish. After the glue cured, I sanded down the glue spots. Then I wiped the entire stummel down with high-proof alcohol followed by acetone to really remove the finish. Since I did my steps slightly out of order, the CA glue had softened in a couple of the fills. So, I picked it out and refilled it. I let the glue cure and then sanded the entire stummel. I had to be very careful over the stamping to preserve it. With the finish removed and the stummel sanded, I placed a wine cork in the bowl and coated it with dye.It’s hard to tell in the pictures, but the dye came out a little too dark, more similar to a Flame Grain. To keep it authentic with a Super Grain, I needed to lighten it back up a bit. I lightly sanded it with my sequence of micromesh pads which also brought the shine back. After the stummel was sanded, the color was nearly perfect. I then buffed it using Tripoli, followed by White Diamond, and finally Carnauba. Now that the outside was finished, I moved on to the inside. After really inspecting the fissures, some of them were deeper than I would like. If it was my pipe, I would have done a bowl coating and just kept an eye on them to address later, but since this pipe was for someone else, I wanted to address it now. This way they won’t have to deal with it down the road. I mixed up some JB Weld, which dries inert and can handle the heat. I carefully stuck it only into the fissures, using as little as possible so as not to coat the briar, since JB Weld won’t breathe like briar.After it cured, I sanded down the JB Weld to make the bowl smooth and flush, as well as to remove any that was not inside the fissures.Then I coated the bowl with activated charcoal in a great method I learned from Dad’s Pipes. (https://dadspipes.com/2015/08/12/a-simple-effective-bowl-coating/)After cleaning the charcoal off the rim, I noticed it had dulled a little bit. So, I threw the buffing wheel back on and gave it another coat of Carnauba. The pipe was now complete! I hope it will bring its new owner joy for many years!

Final Pictures: