Another Bob Kerr Estate – A Danish Sovereign 305 Bulldog Variant

Blog by Steve Laug

I am having some fun with Bob’s pipes now that Jeff has done the cleanup on them. When I was doing both the cleanup and restoration it was slow moving and tedious as he had smoked these pipes last in the 90s and the cake was rock hard and the pipes were dirty. The next pipe is a Stanwell second – Danish Sovereign that is a Danish take on an oval shank Bulldog. It is a shape 305 with a taper stem. This is another of Bob’s pipes that I am working on. I am cleaning them for the family and moving them out into the hands of pipemen and women who will carry on the trust that began with Bob and in some pipes was carried on by Bob. In the collection there were 19 Peterson’s pipes along with a bevy of Dunhills, some Comoy’s and Barlings as well as a lot of other pipes – a total of 125 pipes along with a box of parts. This is the largest estate that I have had the opportunity to work on. I put together a spread sheet of the pipes and stampings to create an invoice. I was taking on what would take me a fair amount of time to clean up. I could not pass up the opportunity to work on these pipes though. They were just too tempting. This quaint Danish Sovereign is an interesting and unique shape to work on.

I think this would have been a Stanwell regular line pipe if it did not have the many small and large flaws that had been puttied. Stanwell did a great job with the fills on the underside of the bowl as they are well blended in the finish. The layout of the shape to the grain is perfect with birdseye on the sides and cross grain on the front and back of the bowl. It is a beauty. To me the shape is a Danish take on a Bulldog – though with the rounded bottom and an oval shank it has come a long way. The pipe is stamped on the underside of the shank Danish Sovereign over Made in Denmark. Following the name stamp is the shape number 305. The top of the tapered stem has a XXX stamp on it. The bowl has a rich contrasting brown stain that makes the grain pop and hides the fills pretty well. There was a thick cake in the bowl with remnants of tobacco stuck on the walls. There was a fair lava overflow built up on the rim top. The edges of the rim and top are dirty but look pretty good under the grime but I would know for certain once it was clean. It was a beautiful pipe that was dirty and tired looking. The stem was oxidized and had some calcification on the first half of the stem. There was a lot of tooth chatter and marks on both sides near the button. Again, surprisingly it did not have the deep tooth marks that I have come to expect from Bob’s pipes. Jeff took photos of the pipe before he started his cleanup work on it. Jeff took photos of the bowl and rim top to show the cake in the bowl and the lava build up on the edges of the bowl. It was thick and hard but hopefully it had protected the rim and edges from damage. The edges look pretty good. Jeff took photos of the heel of the bowl to show the condition of the finish. You can see the beautiful cross grain running across the front of the bowl and the birdseye on the side of the bowl. Though the pipe is quite dirty the grain and layout are stunning. The third photo shows the large chipping fill on the left side of the bowl on the lower back. Jeff took photos of the stamping on the underside of the shank and the top of the tapered stem. The stamping was readable as you can see from the photos. It read as noted above. The photo of the stem top shows the XXX stamp on the vulcanite stem.Jeff took photos of the top and underside of the stem showing the tooth chatter, scratching and oxidation on the stem surface and wear on the edges of the button.    I turned to Pipephil’s site to confirm my memory about the pipe being a Stanwell product. I vaguely remembered it and also the shape just sang Stanwell make! Sure enough it was indeed a Stanwell second pipe ( made exclusively for the USA and Canada. I have included a screen capture of the section on Danish Sovereign pipes below.Pipedia ( confirms the connection listing the brand as a sub-brand or second. So now I knew what I was dealing with but still had no idea as to the time period of its manufacture.

With over 125 pipes to clean from Bob’s estate I took a batch of them to the states with me on a recent visit and left them with Jeff so he could help me out. This is another of the pipes that Jeff cleaned up and sent back to me. Jeff cleaned the pipe with his usual penchant for thoroughness that I really appreciate. This one was a real mess and I did not know what to expect when I unwrapped it from his box. He reamed it with a PipNet pipe reamer and cleaned up the reaming with a Savinelli Fitsall Pipe Knife. He scrubbed out the internals with alcohol, pipe cleaners and cotton swabs until the pipe was clean. He scrubbed the exterior of the bowl with Murphy’s Oil Soap and a tooth brush to remove the grime and grit on the briar and the lava on the rim top. The finish looks very good with good looking grain around the bowl and shank. Jeff soaked the stem in Before & After Deoxidizer to remove the oxidation on the rubber. When the pipe arrived here in Vancouver for the second stop of its restoration tour it looked very good. I took photos before I started my part of the work. (The first photo is out of focus slightly but you can still see the flaw on the bottom part of the bowl.) I took some close up photos of the rim top and also of the stem surface. Once again Jeff did a remarkable job in his cleanup of the rim top. The bowl and the rim top looks good. The grain really stands out and the outer edge looks good. There is some roughening on the front inner edge and some burn damage. I also took close up photos of the stem to show the lack of tooth marks on the stem surface. You can also see the light tooth marks and the slight wear to the button edge.Since this is another pipe Bob’s estate I am sure that some of you have read at least some of the other restoration work that has been done on the previous pipes. You have also read what I have included about Bob Kerr, the pipeman who held these pipes in trust before I came to work on them (see photo to the left). Also, if you have followed the blog for long you will already know that I like to include background information on the pipeman whose pipes I am restoring. For me, when I am working on an estate I really like to have a sense of the person who held the pipes in trust before I worked on them. It gives me another dimension of the restoration work. I asked Brian if he or his wife would like to write a brief biographical tribute to her father, Bob. His daughter worked on it and I received the following short write up on him and some pictures to go along with the words including one of Bob’s carvings. Once again I thank you Brian and tell your wife thank you as well.

I am delighted to pass on these beloved pipes of my father’s. I hope each user gets many hours of contemplative pleasure as he did. I remember the aroma of tobacco in the rec room, as he put up his feet on his lazy boy. He’d be first at the paper then, no one could touch it before him. Maybe there would be a movie on with an actor smoking a pipe. He would have very definite opinions on whether the performer was a ‘real’ smoker or not, a distinction which I could never see but it would be very clear to him. He worked by day as a sales manager of a paper products company, a job he hated. What he longed for was the life of an artist, so on the weekends and sometimes mid-week evenings he would journey to his workshop and come out with wood sculptures, all of which he declared as crap but every one of them treasured by my sister and myself. Enjoy the pipes, and maybe a little of his creative spirit will enter you!

Now on to the rest of the restoration on this Stanwell made Danish Sovereign 305 Bulldog. Since Jeff had done such an amazing clean up job on the bowl it was very easy for me. I decided to address the damage to the fills on the left side and the bottom of the bowl. The fill on the left can be seen in the first photo below. In the second photo of the bowl underside below you can see what appears to be a crack to the naked eye. It is not a crack but rather a series of 5-7 fills in a cluster. They form almost an “H” shaped figure on the bowl bottom. The fills all showed pits and flaws in the original putty repairs.I wiped the areas down with alcohol and filled in the damaged spots on the fill with clear super glue. The next three photos show the extent of the repairs to the briar. When the repair had cured I sanded them with 220 grit sandpaper until the surface as smooth.I started the polishing process on the repaired areas with 400 grit wet dry sandpaper. The repairs are solid on both the side and the bottom of the shank.While I was at it with the sandpaper I worked on the damaged rim edge with the 220 grit sandpaper and the 400 grit wet dry sandpaper. When I was finished the rim looked better.I decided to polish the bowl as a whole with micromesh sanding pads – wet sanding with 1500-12000 grit pads and wipe the bowl down after each pad with a damp cloth to remove the sanding dust. The outcome of the polishing is a rich deep shine that is only enhanced by the wax at the end of the process. I decided to clean the briar with Mark Hoover’s Before & After Briar Cleaner to clean up the sanded surface of the briar and blend the repairs into the briar. I rubbed it into the surface of the briar and let it sit for 10 minutes. I rinsed the bowl off with warm running water to remove the product and the grime. I used an Oak stain pen to touch up the sanded areas on the bottom and side of the bowl. I stained the rim top at the same time. I rubbed the bowl down with Before & After Restoration Balm at this point in the process. I worked it into the surface of the briar with my fingertips to clean, enliven and protect it. I let the balm sit for a little while and then buffed with a cotton cloth and shoe brush to raise the shine. I use this product on every pipe that I work on as it really works. Have a look at the stained portions of the bowl. The product really worked to blend it into surrounding bowl colour. I set the bowl aside and turned my attention to the stem. I “painted” the tooth indentations on the top and underside with a “Bic” style lighter. Since vulcanite has memory the dents lifted nicely and I would be able to lightly sand the stem to remove the remaining marks.  I sanded the stem with 220 grit sandpaper to break up the oxidation. I started the polishing with 400 grit wet dry sandpaper to remove the scratching. It is starting to look good. I rubbed the stem down with Denicare Mouthpiece Polish. I have a few tins of this laying around so I am trying to use them up. It does a pretty good job polishing the stem.  I polished the stem with micromesh sanding pads – wet sanding with 1500-12000 grit pads. I wiped the stem down after each sanding pad with Obsidian Oil. I polished it with Before & After Pipe Stem Polish – both Fine and Extra Fine. Once I had finished the polishing I gave it final coat of oil and set it aside to dry.    With Bob’s pipes I am always excited to be on the homestretch and seeing the final look when it is put back together, polished and waxed. I put the bowl and stem back together. I polished the bowl and stem with Blue Diamond to polish out the scratches in the briar and the vulcanite. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The birdseye grain on the sides of the bowl and the cross grain on the front and back looked good with the polished black vulcanite. This Stanwell made Danish Sovereign Danish Style Bulldog was another fun pipe to work on thanks to Jeff’s cleanup work. The combination of various brown stains really makes the pipe look attractive. It is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions of the pipe are Length: 5 ¼ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. This one will go on the rebornpipes store shortly if you would like to carry on Bob’s legacy with it. No worries though, I have a lot more to work on of various brands. Perhaps one of those will catch your attention. Thanks for reading this blog and my reflections on the pipe while I worked on it. This is an interesting estate to bring back to life.

5 thoughts on “Another Bob Kerr Estate – A Danish Sovereign 305 Bulldog Variant

  1. Pingback: A Unique Stanwell 33 Bulldog from Bob Kerr’s Estate | rebornpipes

  2. Pingback: Restoring a Stanwell Made in Denmark Black Diamond 29 Billiard | rebornpipes

  3. Pingback: Restoring a Svendborg Danish Handmade Bark 19 Brandy | rebornpipes

  4. Pingback: Restoring a Handmade Denmark Stanwell Selected Briar Canadian 56 Regd. No. 969-48 | rebornpipes

  5. Pingback: Restoring a Peterson’s Dunmore 70 Bent Apple Sitter from Bob Kerr’s Estate | rebornpipes

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.