The Easiest Restoration in the Recent Estate Lot – A Savinelli Oscar 701 Lovat


Blog by Steve Laug

This little Savinelli Lovat is by far the easiest pipe I have cleaned up from the recent estate lot pipes that my brother purchased. It is a beautifully rusticated Lovat with an almost sandblast finish over the rustication. It is a oxblood stained pipe with a vulcanite stem. I wonder if it was not the last pipe that the pipeman purchased before his demise. The bowl had a light cake in it and the rim already had some overflow of lava on the top but the bowl had not been smoked to the bottom. The bottom of the bowl was raw briar. It had very few tooth marks and chatter. The stem was lightly oxidized and the finish was in great shape. It is stamped on the smooth portion on the underside of the shank with the words Oscar over Aged Briar on the heel of the bowl. Next to that it was stamped with the Savinelli S in a shield next to the shape number 701 over Italy. My brother took the following photos of the pipe when he brought it home from the sale.

I looked the shape up on the Savinelli Shape Chart and found it there in the right hand column. It is the second pipe circled in red below.

Jeff also took a photo of the rim top and the cake in the bowl. There is a light cake in the bowl and a lava overflow on the top of the rim and the bevel. It was not too thick so it would easily come off the surface. He took two photos of the underside of the shank. The first shows the 701 shape number and the second shows the remainder of the stamping. The contrast stain on the rustication pattern looks very good.The next two photos show the side and bottom of the bowl. The random pattern of the rustication almost looks like a sandblast pattern.On the left side of the saddle portion of the stem there is the characteristic Savinelli Oscar shooting star stamp. It is in excellent condition.The next two photos show the condition of the stem. The tooth marks and chatter on both sides of the stem near the button are not too deep in the surface of the vulcanite. They should be relatively easy to remove.

Jeff thoroughly cleaned out the internals of the pipe, reaming it with a PipNet reamer and removing all of the cake. He scrubbed the externals with Murphy’s Oil Soap and was able to remove all of the lava on the top of the rim. He rinsed the bowl in water to remove the debris of the cleaning. The stem soaked in Oxyclean to lift the light oxidation that was present. It came to the surface and would be easily remedied. The next four photos show the pipe when it arrived in Vancouver. It really was a delicate looking Lovat that showed real promise.

I had to have a picture of the cleaned up rim top. It was amazing how he had been able to get all of the lava off on the top and the bevel as well.The next two photos show the oxidation that I would have to deal with to get the stem back to its polished black glory.I sanded the stem with 220 grit sandpaper to break up the oxidation and remove the tooth chatter and marks.I ran a pipe cleaner with alcohol through the mortise and the airway in the shank and stem. It was very clean so nothing more needed to be done. The mortise was very clean.I hand buffed the bowl with a shoe brush to raise a shine. The next photos show the buffed bowl. It is really a nice looking pipe. I polished the stem with micromesh sanding pads – wet sanding with 1500-2400 grit pads and then rubbing it down with Obsidian Oil. I dry sanded with 3200-4000 grit pads, gave it another coat of oil then buffed it with red Tripoli. I brought it back to the work table and finished polishing with 6000-12000 grit micromesh pads. I gave it a final coat of Obsidian Oil and set it aside to dry. I buffed the bowl lightly with Blue Diamond to raise a shine. When buffing a rusticated bowl with Blue Diamond a soft touch is imperative or you will fill in the divots of the rustication with the polishing compound. I buffed the stem with the Blue Diamond as well, being careful around the shooting star logo so as not to damage it. I gave the stem multiple coats of carnauba wax and hand waxed the bowl with Conservator’s Wax. I buffed the pipe with a clean buffing pad to raise the shine and by hand with a microfibre cloth to deepen the shine. The dimensions of the pipe are Length: 5 ½ inches, Height: 1 ¾ inches, Outer diameter: 1 ¼ inches, Chamber diameter: ¾ inches. The finished pipe is shown in the photos below. It will soon be available on the rebornpipes store. If you wish to add it to your collection you can email me at slaug@uniserve.com or send me a private message on Facebook. Thanks for looking.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s