Three Cleanups for a Friend


Guest Blog by Robert M. Boughton

Member, International Society of Codgers
Member, North American Society of Pipe Collectors
http://www.naspc.org
http://www.roadrunnerpipes21.biz  under construction
http://about.me/boughtonrobert
Photos © the Author except as noted

How shall not the ministration of the spirit be rather glorious?
— 2 Corinthians 3:8

INTRODUCTION

As Chuck Richards, my good friend and mentor, has now worked his last official day at the local tobacconist where we enjoyed our pipes together on so many occasions – each of us often absorbed by our own thoughts – his presence is missed by many.  Almost every time I visit the shop, I see customers come in, eager to pick Chuck’s mind on one thing or another concerning pipes, only to learn that he is no longer there.  Then a young emeritus member of our pipe club, who moved away a couple of years ago to study engineering at Purdue, called a mutual friend and said he had some pipes that needed cleaning.  When he asked for Chuck, our common friend referred him to me.

Soon after, I received an email from the young man, Joe Allen, who no doubt still looks too young to be smoking a pipe by the day’s legal standards.  I found out Joe was concerned with three pipes he described as having excess cake and some rim burn and other typical problems he wanted cleaned up by someone he knows and trusts.  I made him an offer he couldn’t refuse.  No, I didn’t have to kill my friend’s horse and put its head in his bed; I have trouble picturing Joe atop that amazing species of animal, although for all I in fact know about him he could be a country boy who grew up on a farm with horses and cows and all the rest, and be outraged at the suggestion that he is in any way equestrian challenged.

All I knew about Joe’s present whereabouts was that he changed his major from engineering (thank God) and moved to Missouri to go to med school and become a surgeon.  Now, that’s more the speed of the Joe Allen I remember.Joe1For Joe, I was tempted to tell him to send them to me with a return label so I could do the work for free.  But then my senses returned.  I just can’t keep cleaning and fixing my friends’ pipes without getting something in return other than the pleasure of working on their beautiful prizes!  So we settled on $10 each, which included return postage.  I didn’t even have a clue as to the kind of pipes Joe was sending me, except of course that they were designed for tobacco.

For that and other reasons, I was excited when the insured box arrived at my Post Office several days later, $30 in cash tucked with a note in an envelope stashed inside.  When I got to my car, I used my handy flip knife to open the well-wrapped package that was padded with the exceptional care for the precious cargo one would expect from a future surgeon.  I knew from the layers of bubble wrap that stuffed the small USPS Priority Mail box, and in particular upon finding the three pipes in question wrapped in smaller taped pieces of the same material, that they were cherished and adored by Joe.  I was honored that he entrusted his treasures to me and determined not to disappoint him.

Anyone who knows me, even if only from my blogs here, might have guessed that I had to get a look at the pipes right then and there.  With complete respect and care for the contents, I removed each of the neat little bubble-wrapped pipes one at a time.  I was surprised and pleased by the variety.

The first was a Hardcastle of London rustic bent billiard #45 of a beautiful, dark red color.  There are two stamps on the bit, an H on the left side and, in capital letters across the underside where it meets the shank, the word France.  I can find no mention of French made Hardcastles and suspect this may have been from a convenient bit supplier.  Steve confirms my guess.  But the fine briar smoker was in excellent, almost new condition that appeared to present no problems, although of course one popped up that I will describe later.

The second was a very nice Dr. Grabow smooth straight billiard with the name Bucko and a yellow spade on the left side of the bit.   My first impression of the Bucko, other than its wonderful vertical grain around both sides and the back and a nice birds-eye on the front, was that the bit seemed to be a replacement, as it was not flush with the shank opening.  I was happy, though, to see the bit rather than the shank was too big in places, just right on both sides and only extended too far on the top and bottom.  I knew I could fix that.

Then came the last pipe, and I even guessed the brand from feeling the shape through the bubble wrap: a classic K&P Peterson of Dublin System Standard smooth bent billiard.  Admiring it, I was startled when the bit popped out in one of my hands holding it with reverence.  Giving it an easy slight twist back into the nickel banded shank, it did it again.  And again.  Well, I ventured to guess, this little beauty was going to be an interesting challenge.Joe2I could not wait to get to work on them, having estimated a two-day turn-around.  First, of course, I had to stop by the tobacconist for a little relaxation and contemplation while I puffed one of my own pipes and studied Joe’s excellent set awaiting my gentle ministrations.  All of them, which were nowhere near as dirty or caked-up as Joe indicated, presented interesting challenges nevertheless.

RESTORATIONS – DR. GRABOW BUCKOJoe3 Joe4 Joe5 Joe6For all the nasty talk about the brand, I have to admire the appealing visual twists on classic shapes that Dr. Grabow will throw into some of its designs, in particular the older ones.  Take this billiard, for example, with the unusual oblong aspect of the tapering shank.  At a glance, the problems that presented with the stout little Bucko were all minor.  There was slight rim darkening, far less than average chamber char, and a small amount of the original stain on the top of the shank that appeared to have been applied with some haste resulting in a shiny patch where heat drew out the liquid, which then re-dried.  Then again, perhaps the Bucko’s stummel had faded everywhere else, and that little area was all that remained of the factory finish.  Another possibility is that whoever chose the replacement bit prepped the wood for a refinish that for whatever reason was never applied.Joe7Closer inspection reaffirmed the theory of a replacement bit that was added without quite enough attention to detail, although the sides were perfect.  Again, only the top and bottom were misaligned. Joe8I began with the rim, which came clean after firmer than usual rubbing with superfine “0000” steel wool, and went for my usual approach on the chamber:  I used my Senior Reamer before sanding, first with 150-grit paper, then 180, 220 and 320.Joe9 Joe10I decided I might as well get the only real challenge with the Bucko out of the way and regarded the bit.Joe11I started with 220-grit paper to take off the excess Vulcanite on the top and bottom, but that got me nowhere.  I reached for the 180, and about a half-hour later was done with the fitting task.  I tossed the scratched bit in a preliminary OxiClean wash.  The scratches came off with wet micro meshing from 1500-12000. Joe13 Joe14 Joe15I took a close look at the scratches on the stummel.Joe16 Joe17With only the steel wool and the full range of micro mesh, wiping the wood with a soft cotton cloth between each grade, I was able to give the briar a nice, even smoothness.Joe18 Joe19Joe20 Joe21I retorted the pipe with Everclear.

Joe22After using the electric buffers to apply red and white Tripoli, White Diamond and carnauba to the bit and all of the same except for the red Tripoli to the stummel, here is the finished Bucko.Joe23 Joe24 Joe25 Joe26 Joe27 Joe28PETERSON SYSTEM STANDARDJoe29 Joe30 Joe31 Joe32 Joe33 Joe34I started by reaming and sanding the chamber and dispensing with the light rim char.  After giving my Senior Reamer a few turns in the chamber, I used 150-, 180-, 220- and 320-grit papers to make it ultra-smooth, but the steel wool was not enough to do the trick with the rim so I used a light touch of 320-git paper for the rest of the burns there.  As the second photo below shows, it turned out quite well. Joe35 Joe36There were some scratches and light pocks on the stummel that I eliminated by lightening the color of the stummel somewhat with steel wool.Joe37 Joe38Then I applied Fiebing’s Brown boot treatment to the stummel, let it cool and removed the thin layer of residue with 12000 micromesh.Joe39 Joe40The bit that appeared at first to be loose worked itself out somehow, maybe with the retort I did next.  And that was it, other than buffing the wood with white Tripoli, White Diamond and carnauba.  This was the only time I didn’t need to do anything to the bit.Joe41 Joe42 Joe43 Joe44 Joe45 Joe46HARDCASTLE OF LONDONJoe47 Joe48 Joe49 Joe50 Joe51 Joe52 Joe53 Joe54 Joe55Just to shake things up a bit, as I never start with the bit, that’s what I’m going to do.  Besides, this one is so easy, I might as well get the hardest part out of the way.

When I removed the bit the first time, I noticed it was so tight it wouldn’t budge.  Afraid of breaking either the tenon or part of the shank, I followed one of Chuck’s first lessons to me. Grasping the bit firmly in one hand – prepared to stop if I felt one more hint that a foreign substance was making the two parts stick – I turned the stummel with my other hand.  The sound was awful, but the parts came loose with a slowness I didn’t rush.  All that was needed to loosen the bit so it was easy to turn into the shank was a couple of tight turns of steel wool around the tenon.

The discoloration is shown just as it in fact appeared with my own eyes for once, rather than the camera’s POV.  In my opinion, just as a camera will add a few unwanted and unfair pounds to humans, so will it give a more flattering gloss to Vulcanite than the material often deserves. I gave it an OxiClean bath for about a half-hour.Joe56 Joe57And here it is after the bath and a brisk rub down with a soft cotton cloth.Joe58After wet micro meshing from 1500-12000, buffing on the wheel with red and white Tripoli, White Diamond and carnauba, and re-filling the empty H with a white china marker, this is the final result.Joe59I reamed and sanded the chamber and rid the rim of dark marks.  I used the same approach as the first two pipes on the chamber, and again, only steel wool was needed for the rim.Joe60 Joe61All that was left before the final buff was to retort the pipe, and as always, I was glad I did.Joe62Coating the already beautiful, rusticated red briar with Halcyon II wax, I set it aside to dry before wiping it down with a soft cotton cloth.Joe63 Joe64I was almost sad to be finished.Joe65 Joe66 Joe67 Joe68 Joe69 Joe70 Joe71CONCLUSION

Now I have to return these three fine pipes to their owner.

SOURCES

http://www.pipephil.eu/logos/en/logo-hardcastle.html

https://pipedia.org/wiki/Hardcastle

 

 

 

 

 

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s