Tag Archives: Rusticated Gourd Porcelain Bowl pipe

Cleaning up another Carved Bowl Gourd Calabash with Porcelain Cup


Blog by Steve Laug

With all of the work I have been doing the last couple of days on gourd calabash pipes I decided to look through some my pipes awaiting restoration and found three more calabashes. Last night I tried to remove the stem from the top pipe with the yellow stem and the tenon broke off in my hand. That left me with the bottom pipe in the photo below. It had a carved finish on the gourd surface and a unique Porcelain cup instead of meerschaum. It was a tall narrow pipe. Jeff had done the clean up work on the interior of the gourd and the porcelain cup. There was still some darkening on the rim top but nothing serious. He had soaked the stem in Before & After Deoxidizer and then scrubbed it with Soft Scrub. I have had it in boxes here for at least a year if not longer The vulcanite stem is lightly oxidized and the porcelain is dull and needing to be polished but otherwise they are in excellent condition.The calabash on the bottom of the above photo is a tall, narrow, drawn out gourd. The gourd has a carved finish that does not come through well in the above photo. It is well done and very tactile. Its measurements are Length: 9 inches, Height: 4 ½ inches, Diameter of the porcelain cup: 2 ½ inches, Diameter of the chamber: 1 inch, Depth of the chamber: 1 inch. I took photos of that pipe before my polishing work. I took photos of the cup to show the cleanness of the bowl. It is a little scratched which I will polish out. The stem is lightly oxidized and has light tooth chatter and marks. It should clean up easily.      I took the pipe apart and took a series of photos to show its condition and the overall appearance of the pipe. The cork gasket it dry and lifeless and needs to be rejuvenated. The porcelain bowl is quite different from the normal meerschaum bowl that is generally used on these calabash pipes.     I used some Vaseline Petroleum Jelly to rejuvenate the cork gasket in the bowl. I worked it into the cork with my finger tips to soften the gasket. Once it had absorbed a bit it would be soft and hold the porcelain bowl in the gourd easily.I polished the porcelain cup/bowl with micromesh sanding pads – polishing with 1500-12000 grit pads and wiping them down with a damp cloth after each pad.  Because the gourd had been carved and the surface opened up the calabash was quite dry. I worked some Before & After Restoration Balm into the finish with my finger tips and a horsehair shoe brush. The product cleans, protects and enlivens the surface of the material that it is rubbed into and in this case it really enhanced the rustication on the gourd.   I put the porcelain cup in the gourd calabash bowl and took photos of the restoration of this pipe to this point in the process.      I sanded out the tooth marks in the vulcanite with 220 grit sandpaper and blended them into the surface of the surrounding stem. I started the polishing with 400 grit wet dry sandpaper. I wiped it down with Obsidian Oil after the sanding.    I set aside the bowl and turned my attention to the stem. I polished the stem with micromesh sanding pads –sanding it with 1500-12000 grit pads. I wiped it down after each pad with Obsidian Oil. I polished it further with Before & After Pipe Stem Polish – both fine and extra fine. I gave it a final coat of Obsidian Oil.     I really enjoyed refurbishing this pipe because I love the final touches that make it sing. I put the Gourd Calabash back together and lightly buffed the bowl with Blue Diamond on the buffing wheel. I gave the gourd and stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. It is fun to see what the polished porcelain bowl looks like with the smooth finished gourd and the black vulcanite stem. This richly finished Gourd Calabash is light weight and ready for you to load up a tobacco of preference and enjoy smoking it. The porcelain bowl is clean and ready load up with your favourite tobacco. Have a look at it in the photos below. As noted above, Its measurements are Length: 8 inches, Height: 3 ½ inches, Diameter of the meerschaum cup: 2 ¼ inches, Diameter of the chamber: ¾ of an inch, Depth of the chamber: 1 ¼ inches. The weight of the pipe is 71grams/2.50oz. This is one will be going on the rebornpipes store in  CERAMIC & MEERSCHAUM PIPES – CALABASHES, SMOOTH & FIGURALS section. Thanks to each of you who are reading this blog. Remember we are not pipe owners; we are pipemen and women who hold our pipes in trust until they pass on into the trust of the next generation.