Tag Archives: Replacing a brass Jobey Logo on the stem top

A Sad and Tired Looking Jobey Stromboli 440 Square Shank Billiard


Blog by Steve Laug

The next pipe on the work table is one that came to us from a fellow we have bought pipes from in Brazil, Indiana, USA early in 2020 and I am finally getting to it. It is a nice looking Jobey rusticated, square shank billiard with a fancy acrylic stem. It is stamped on the underside of the shank Jobey [over] Stromboli. To the right of that is the stamped shape number 440. The yellow acrylic saddle stem was missing the brass inlaid Jobey oval. The pipe has a heavily rusticated finish with deeper random craters carved in the rusticated surface. The finish was absolutely filthy on this one with grime and dust deep in the crevices. There was a heavy cake in the bowl and a heavy overflow of lava onto the rim top. There were some nicks or at least worn spots on the outer edge of the rim but the rustic carved rim top makes it hard to know if they deep or just worn. The stem had a blackened airway from the tobacco juices and it had some shallow tooth marks and chatter on both sides near the button. The stem was screwed onto the shank with the Jobey Link system which was in excellent condition. Jeff took some photos of the pipe before he did any clean up.    He took photos of the rim top and the stem. The photo of the rim top shows the incredibly thick cake in the bowl and the heavy coat of lava on the filling in the crevices and valleys of the heavily rusticated rim top. The stem photos show the oils and tars in the airway of the bright yellow stem and some tooth chatter and tooth marks. Jeff took photos of the sides and heel of the bowl to give a sense of the rustication on the pipe and the sheer filthy condition of the finish. There is still something attractive about the rusticated finish on the bowl. I took photos of the stamping on the right and left side of the shank. The stamping is clear and reads as noted above. You can also see the top of the stem where the brass Jobey logo is missing. I removed the stem from the shank and took a photo of the Jobey Link system tenon. The threads screw into the threaded shank and the smooth portion is supposed to fit snugly in the stem.I reread several of the blogs I have written on the brand in the past restorations of Jobey pipes and decided to include the material on the brand before I write about the cleanup of the pipe. Here is the link to the blog (https://rebornpipes.com/2020/04/03/restoring-jennifers-dads-jobey-asti-245-pot/). I quote:

I turned to Pipephil’s site for a quick review of the brand (http://www.pipephil.eu/logos/en/logo-j3.html). I quote a section of the post on the Jobey brand: These pipes are made in St Claude (France) by Butz-Choquin (Berrod-Regad group) since 1987. Before this date some were manufactured in England and Denmark (Jobey Dansk).

I turned then to Pipedia to gather further information regarding the brand and quote the first part of the article (https://pipedia.org/wiki/Jobey).

English – American – Danish – French… Sadly, solid information about Jobey is scant…

Probably established in England around 1920(?) the brand hiked into the USA later. In the course of time owner, distributor and manufacturer changed repeatedly. As far as is known the following companies have been involved with the brand:

George Yale Pipes & Tobacco, New York (1942)

Norwalk Pipe Co., New York (1949)

Arlington Briar Pipes Corp., Brooklyn (when?)

Hollco International, New York (1969).

Weber Pipe Co., Jersey City, NJ (1970’s)

The Tinder Box, (1970’s – 80’s).

Throughout decades Jobey pipes were mainly sold in the USA, Canada and England but remained almost unknown in continental Europe. The bulk of Jobeys was predominantly made according to classical patterns and mainly in the lower to middle price range. The predominant judgment of the pipe smokers reads: “A well-made pipe for the price.” So there is hardly anything very special or exciting about Jobey pipes although a flyer from ca. 1970 assures: “The briar root Jobey insists upon for its peer of pipes is left untouched to grow, harden and sweeten for 100 years. […] Jobey uses only the heart of this century old briar and only one out of 500 bowls turned measures up to the rigid Jobey specifications.” 99.80% of cull… that makes the layman marveling!

Now it was time to work on the pipe. I decided to start with the stem. I sorted through some of the pipes remaining for me to work on and I had this broken Jobey stem. I used a small pen knife to lift the brass logo out of the damaged stem to use on the yellow one. I put some white all purpose glue in the indentation on the stem top and used a small dental probe to press the brass logo into the spot it was missing. I wiped off the excess glue and pressed the edges down with the probe and I was happy with the look and fit of the “new” brass logo. The Jobey link was stuck fast in the stem and I had a hard time removing it. I used a small screw driver as a wedge and lifted it out of the stem. Once I had it out I would need to sanded the smooth side to loosen the fit while yet leaving it snug.With the tenon removed from the stem I was able to clean out a lot more of the tars and oils in the airway in the stem with pipe cleaners, cotton swabs and alcohol. I also used a small round needle file to file the inside of the airway and remove more of the staining. Once I finished it looked much better. I used a wood rasp to smooth out the surface of the tenon end that fit in the stem. I sanded it with 220 grit sandpaper to smooth out the scratches in the Delrin. I wanted the fit to be snug but not tight. I worked well.I sanded the stem surface with 220 grit sandpaper to remove the tooth marks and chatter and blend them into the surface of the acrylic. I started polishing the stem with 400 grit wet dry sandpaper. I polished the stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I turned back to the bowl. I rubbed the it down with Before & After Restoration Balm. I worked it into the surface of the rustication on the bowl and with a horsehair shoe brush to get into the nooks and crannies of the finish. The product works to clean, enliven and protect the briar. I let the balm sit for 15 minutes and then buffed with a cotton cloth to raise the shine.   Once again I am the part of the restoration that I always look forward to – the moment when all the pieces are put back together. I put the Jobey Stromboli 440 Square Shank Billiard back together and buffed the bowl and stem with Blue Diamond on the buffing wheel. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. It is fun to see what the polished bowl looks like with the dark rusticated finish. The swirled fancy yellow acrylic stem stands in contrast to the dark colours of the bowl. It is a light weight pipe that could be clenched and smoked while doing other things. Have a look at it with the photos below. The dimensions of the pipe are Length: 5 ½ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 37 grams/1.31 oz. This one will soon be on the American Pipemakers page on the rebornpipes online store. Thanks to each of you who are reading this blog. Remember we are not pipe owners; we are pipemen and women who hold our pipes in trust until they pass on into the trust of the next generation.