Another CBP Hudson Bay Canadian from the Bertrams Lot

Blog by Steve Laug

Give the previous blogs a read to have an idea about the Bertram Collection that I am working on these days. I can’t adequately describe how overwhelmed I am when I look at the 200+ pipes that need to be restored but there is only one way to move ahead – 1 pipe at a time. Jeff is doing the major cleanup on the lot as that would be more than I could handle by myself in moving through this many pipes. From his cleaned pipes the next one I chose was a long shank C.B.P. Hudson Bay Canadian. There were two C.B.P. brand pipes in the lot and both were long shank Canadians. Like the first one this one also had a smooth finish that was dirty but the grain shone through showing me that this was a beautiful pipe. It had a long shank and short stem. There was very little cake in the bowl and the rim top looked almost pristine. The stem was oxidized and had some pitting on both sides. Jeff took photos of the pipe to give an idea of its condition before he did his cleanup. Jeff took a close up photo of the bowl and rim to capture the condition of the pipe before he started his cleanup work. The rim top looked really good with a light lava and grime coat. There were some small nicks on the rim top and outer edge but other than that it was very clean. The bowl had a very thin cake and was quite clean.He also took photos of the sides of the bowl and heel to show the interesting grain on the pipe. The finish is very dirty and it looks like there are a few fills in the briar but this is another interesting pipe. Jeff took photos to capture the stamping on the top and underside of the shank. The first photo shows stamping on the top side which read C.B.P. over Hudson Bay. The stamping on the underside read Algerian Briar. All the stamping on the pipe is clear and readable.The next two photos show the stem surface. They show the pitting and oxidation on the surface of both sides of the stem. There are also some nicks on the edge of the button.I had already cleaned another CBP Hudson Bay Canadian and written a blog about it so I turned once again to have a look at the information on the brand that I included on that blog. Here is the link to the previous blog – I quote from the information found there and also include the pictures that I had tracked down about the brand.

Now it was time to try to unravel the mystery of the stamping on the shank of this pipe. The stamping Algerian Briar was clear but did not tell me who the maker of the pipe was. The clue that I had to work with was the stamping on the top of the shank – C.B.P. Hudson Bay. With that I had two options to check out – would there be a listing anywhere for the C.B.P. brand or would there be anything under Hudson Bay. I turned first to look for anything about the C.B.P. brand. I looked on WMTP (Who Made That Pipe) and there was nothing. I looked on Pipedia and there was nothing. I looked on the PipePhil site and there was nothing. I looked at the same sites for the Hudson Bay stamp. The results were the same. I stopped and paused for a moment and thought about the initials. What brand did I know that fit the C.B.P. logo? There was only one that I could remember – short memory or short list? Your call. That brand was C.B. Perkins. I turned again to PipePhil and Pipedia and I found some help.

First on the PipePhil site ( I found a connection. I have included a screen capture below to show what I saw. Not counting the CBP in an oval logo on the stem what caught my eye was the C.B.P. Heritage stamp on the shank. Now I had the connection I was looking for – C.B.P. was linked to C.B. Perkins. Now I needed to have a look at Pipedia and see what I could find out about the brand.

I checked first in the Pipemaker list by country that is on the site and could not find the brand. I then did a quick search on Pipedian and found this link: I quote from that site in full.

The first C.B. Perkins store opened in Boston in the early 1900’s. Perkins quickly became the leading retail tobacconist in New England, a position it held for over 75 years. In 1986 Perkins management sold their Pennsylvania and New Jersey stores to DES Tobacco Corporation.

DES is a wholly owned subsidiary of the S. Frieder and Sons Company. S. Frieder and Sons had been a cigar manufacturer since 1920. In 1978 S. Frieder sold its manufacturing business to United States Tobacco so it could focus all its assets and energy on the retail tobacco business under the name of DES Tobacco. Thus, the merger of C.B. Perkins and DES represented four generations of tobacco experience.

There were also some photos of the shop and business card courtesy of Doug Valitchka. I am including those here as well. Now I knew that I was dealing with a Tobacco Pipe Shop pipe from C.B. Perkins. However they did not make pipes but tended to have pipes made for them by English pipe maker such as Comoys, GBD and others. So that is where the hunt ends. There are no COM stamps on the pipe and no shape numbers to help nail down a maker. The shape reminds me a lot of both of those makers. But at least I know what the C.B.P. stamp means. Now it is time to work on this pipe.

Before I began my part of the restoration I summarize Jeff’s work on the pipe and include photos of what the pipe looked like when I received it in Vancouver. Jeff reamed the bowl with a PipNet pipe reamer and followed up with a Savinelli Fitsall pipe knife to remove the cake. He scrubbed out the mortise and the airway in the shank and the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the bowl, rim, shank and stem with a tooth brush and Murphy’s Oil Soap to remove the grime on the finish of the bowl. He rinsed it under running water. He dried it off with a soft cloth. He soaked the stem in Before & After Deoxidizer to remove the oxidation. I took a close up photo of the rim top to show the general condition of the rim top. Other than minor scratches and nicks it was in great condition. Both the inner edge and the outer edge of the rim look really good. The stem photos show the pitted surface of the vulcanite and some nicks in the button edge on both sides. There were light tooth marks and chatter on this stem.I polished the rim top and the rest of the briar with micromesh sanding pads – wetsanding it with 1500-2400 grit pads and dry sanding it with 3200-12000 grit pads. I wiped the bowl down with a damp cloth after each pad to remove the sanding debris. After the final sanding pad I hand buffed it with a cotton cloth to raise a shine. I worked some Before & After Restoration Balm into finish of the briar with my fingertips to clean, enliven and protect it. I let the balm sit for a little while and then buffed with a cotton cloth to raise the shine. Once again I am surprised by how the Balm really makes the grain stand out. The pipe really looks good at this point and the grain stands out beautifully. I am very happy with the results. I set the bowl aside and turned my attention to the stem. I used a folded piece of 220 grit sandpaper to smooth out the pitting on the surface of the stem. I started polishing the stem with a folded piece of 400 grit sandpaper. I wiped the stem down with Obsidian Oil and took the following photos.I polished the stem with micromesh sanding pads – wetsanding it with 1500-2400 grit pads and dry sanding it with 3200-12000 grit pads. I wiped the stem down with Obsidian Oil after each pad. I polished it with Before & After Pipe Polish – both Fine and Extra Fine and gave it a final coat of Obsidian Oil and set it aside to dry. When I get to this point in the refurbishing or restoration process I get excited to see what the finished pipe will look like. It is time to buff and wax it. I put the stem and bowl back together and buffed the pipe with Blue Diamond on the buffing wheel. I polished the briar and the vulcanite stem until there was a rich shine. The polished briar came alive with buffing and the straight, swirled and flame grain just popped with polishing. The black vulcanite stem developed a rich glow. The finished pipe is a long shank Canadian shaped pipe that really is a comfortable handful of briar. Have a look at it with the photos below. The dimensions are Length: 7 1/2 inches, Height: 1 7/8 inches, Outside diameter of the bowl: 1 3/8 inches, Chamber diameter: ¾ of an inch. I will be putting this one on the rebornpipes store soon. If you are looking for a long shank Canadian from a historic Pipe Shop – C.B. Perkins this might just be what you are looking for. Let me know if you are interested. Thanks for walking through the restoration of this with me it was a pleasure to work on.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.