Blog by Steve Laug
This afternoon I decided to work on the first of a few Peterson’s Pipes that I have still to work on from a variety of places. This rather large rusticated pipe was purchased from an antique store on 10/20/2022 in Vancouver, Washington, USA. It is a large pipe that is stamped on a smooth panel on the underside of the shank. It read Peterson’s [arched over] Dublin. Underneath that it is stamped Made in the Republic of Ireland (three lines). The pipe was quite dirty when Jeff found it with dust and debris in the rustication. The mixture of brown stains give depth and texture to the rustication. The bowl was moderately caked and there was dust and lava in the rustication on the rim top. The edges were quite clean and undamaged. The vulcanite stem was oxidized and dirty with tooth marks and chatter on both sides ahead of the button. The “P” stamped on the left side of the taper P-lip stem and appeared to have remnants of gold stamped in the letter. Jeff took photos of the pipe before he started his clean up work on it. He took photos of the bowl and rim top to show their condition and of the stem to show the condition of both sides. The photos of the sides and heel of the bowl show the rugged rustication on the bowl and shank. The mixture of brown stains adds depth finish on the pipe. Even under the grime it is a real beauty. The stamping on the underside of the shank are shown in the photos below. The are clear and readable as noted above. Jeff captured the detail in the photo below. I am including the information from Pipedia’s article on Peterson pipes. It is a great read in terms of the history of the brand (https://pipedia.org/wiki/Peterson). I have included a bit of the pertinent history here.
1950 – 1989 The Republic Era – From 1950 to the present time, the stamp for this era is “Made in the Republic of Ireland” in a block format generally in three lines but two lines have been used with or without Republic being abbreviated.
During the 1950’s and 60’s the Kapp & Peterson company was still in the ownership of the Kapp family. However 1964 saw the retiral of the company Managing Director Frederick Henry(Harry) Kapp.
With that information in hand I knew what I was dealing with in terms of the stamping and the age of this pipe. I knew from the information that the pipe was made during the Republic Era between 1950 and the present day. Personally I think this is probably a 60s-70s pipe. Now it was time to work on the pipe.
Jeff had thoroughly cleaned up the pipe. He reamed the pipe with a PipNet Pipe Reamer and cleaned up the remnants with a Savinelli Fitsall Pipe Knife. He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the sump in the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He scrubbed the exterior of the stem with Soft Scrub to remove as much of the oxidation and calcification as possible. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. I took close up photos of the bowl, rim and the stem. You can see how clean the bowl and rim top and edges are. It is almost like new in the overall appearance. The stem is in good condition with just a few tooth marks and some chatter.I took a photo of the stamping on the underside of the shank. All are clear and readable as noted above. I also took a photo of the P stamp on the left side of the stem.I removed the stem from the shank and took a photo to give a sense of the proportions of the pipe. It is really quite nice looking.The finish was in such great condition that I only needed to polish it. I rubbed the bowl down with Before & After Restoration Balm. I worked it into the briar with my finger tips and a horse hair shoe brush. I let it sit for 10 minutes and the Balm did its magic. It enlivens, cleans and preserves the briar. It certainly brought this bowl back to life. I buffed it off with a clean cloth and took the following photos. I touched up the “P” stamp on the left side of the stem with some Rub’n Buff Antique Gold. I rubbed it into the stamp with a tooth pick. I buffed it off with a cotton pad and it looked very good.I polished the vulcanite stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This Republic Era Ireland Peterson’s Dublin Large Rusticated Billiard and a vulcanite P-lip stem is a great looking pipe now that it has been restored. The beautiful rustication really highlights briar and the polished finish is stunning. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Peterson’s Rusticated Billiard fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 7 inches, Height: 2 ¼ inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: 1 inch. The weight of the pipe is 80 grams/2.82 ounces. I will be adding the pipe to the Irish Pipe Makers Section of the rebornpipes store. If you are interested in purchasing this pipe send me a message or an email. Thanks for reading this blog and my reflections on the pipe while I worked on it.