Tag Archives: Barling’s Make Ye Olde Wood 216 EL Saddle stem Billiard

New Life for a Barling’s Make Ye Olde Wood 216 EL Billiard

Blog by Steve Laug

The next pipe on the work table came to us from an online auction in Nampa, Idaho, USA.  The pipe is smooth, nicely grained Billiard shaped pipe with a saddle stem. The pipe is stamped on left side of the shank and reads Barling’s [arched over] Make [over] Ye Olde Wood [over]the shape number 216. On the right side of the shank it is stamped Made In England followed by EL. There was a lot of grime and dust ground into the smooth finish. There was also a large U shaped crack that went up each side and met on the underside of the shank (you will see photos of the crack below). The pipe had been repaired by gluing the chunk of briar in place and banding the shank with a Sterling Silver band. The bowl was heavily caked and there was a lava coat flowing onto the rim top and the inner edge of the rim. The inside and outside edges looked to be in good condition but we would know more once Jeff had cleaned it. The stem was oxidized, calcified and had tooth chatter and marks on the top and underside near the button. The stem was stamped on the topside with the Barling Cross and on the underside and read REGD 98046. The stamping was readable. The pipe showed a lot of promise but it was very dirty. Jeff took some photos of the pipe before he started his cleanup work.   He took photos of the rim top, bowl and stem to give a clear picture of the condition of the pipe. The thickness of the cake and tobacco debris as well as the lava on the rim top and inner edge is visible. The photos of the stem show the oxidation, calcification and the chatter and tooth marks on the top and underside. Jeff took photos of the sides and heel of the bowl to give a picture of the grain around the bowl.  The stamping on the right and left side of the shank are clear and readable and read as noted above. You can also see the Barling Cross stamp on the top of the saddle stem. There is no picture of the Regd number on the underside.The above photos also show the crack in the shank. I am including them again so you can see the downward turn on the crack on each side and the way that it crosses the underside of the shank forming a U-shaped crack that certainly came free from the shank. It had obviously been glued back in place and then the Sterling Silver band had been glued in place on the shank end to bind it all together. I have inserted yellow arrows in the photos below to identify the path of the crack.I turned to Pipephil’s site (http://www.pipephil.eu/logos/en/logo-barling.html) to see if I could find a listing that had the same or similar stamping on the pipe. The stamping is the same other than the shape number. The pipe that I am working on has a shape number on the shank in the same location as the photo below. Barling’s [arched over] Make [over] Ye Olde Wood [over] shape number 216. On the right side Made in England was followed by EL stamp in a pattern like that shown in the screen capture below.Pipedia gives a great history of the brand (https://pipedia.org/wiki/Barling) that is well worth reading. I looked specifically for the Patent Reg’d Stamp and found that the stamping on the stem of the one I was working on was a US Patent number for the stem.

REG’D 98 046 – US patent number – 1936 – 1949

I also worked through the different eras of the Barling pipes. I found a section on redefining the eras and quote from that section as followed:

Family Era 1912 – 1962: Pipes made by the Barling family while it either owned or managed B. Barling & Sons.

Corporate Era 1962 – the Present: Pipes made after the family left off managing the company, beginning with the revised product grades and revised nomenclature that were introduced in the 1962 Dealers’ Catalog.

The Family Era pipes are highly sought after by collectors and have excellent smoking and aesthetic qualities. These pipes are famous for the “old wood” from which they were made. I’m including the 1962 “Barling’s Make” pipes in this category because, initially, they were made while the Family still ran the business. Montague Barling was still President, and Williamson-Barling was still General Manager.

These 1962 pipes were made by the same craftsman from the same materials, as the earlier product. Some of them are stamped with both the old and new model numbers.

…The “BARLING’S MAKE” has the word “BARLING’S” arched over the word “MAKE” in capital block letters. Barling used this block letter logo until late 1962.

Ye Olde Wood Stamp: Sometime around 1913, the “Ye Olde Wood” stamp made its appearance on selected pipes. An example exists stamped on a 1913 date hallmarked pipe.

This logo will continue to be used in the decades to come. Initially it was used to designate a higher grade than the average, much as the “Special” grade would after the Second World War. Price lists show the “Ye Olde Wood” pipes as a separate grade from the basic BARLING’S MAKE pipe. Eventually, “Ye Olde Wood” came to represent the company to the world. The use of “YE OLD WOOD” as a stamp prior to 1940 was haphazard, at best, although the company used the slogan in advertising materials from the early teens onward. (Gage)

Crossed Barling Stem Logo: It is not known when the crossed Barling stem logo first appeared, but an example exists on a pipe with a 1923 date hallmark. And several of the mid 1920’s pipes added in this update also feature the crossed Barling stem logo.

Size Stampings:  Up to 1926 and possibly beyond, Barling used specific, completely unrelated, model numbers to designate the various sizes of a specific shape. They produced pipes in three sizes, small, medium, and large.

Barling’s published price lists show that they continued to offer pipes in only three sizes, small, medium, and large until 1941. That’s it, small, medium, and large. So when someone claims that they have a 1930’s EL, EXEL, or other size, they are mistaken.

In 1941 the published range of sizes expanded. Going from the smallest to the largest, they are SS, S, S-M, L, EL, EXEL, and EXEXEL. There is no “G” for giant. Giant pipes, or magnums, which are oversized standard billiards, were not stamped “G” but are commonly identified by collectors as such because they are obviously large relative to even EXEXEL pipes, and carried no size stampings (Gage).

Now I knew a bit about the pipe I was working on. Because of the Patent stamping on the stem I knew that it was made between 1936-1949. The use of the EL stamp also fits this time period. Now it was time to work on the pipe.

Jeff had cleaned up the pipe with his usual penchant for thoroughness. He reamed the pipe with a PipNet pipe reamer and removed the rest of it with a Savinelli Fitsall Pipe Knife.  He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. I took photos of the pipe once I received it.   The rim top cleaned up really well. The rim top and outer edge of the bowl appear to be in ok condition. There is some darkening on the back side of the inner edge and top and some burn damage on the front inner edge that will need to be addressed. The stem surface looked good with some remaining oxidation and some tooth marks and chatter on both sides near the button.    The stamping on sides of the shank is clear and readable and reads as noted above. I removed the stem and took a photo of the pipe to give a sense of the whole. It would clean up and be a gorgeous pipe.Now it was time to do my work on the pipe.  I took photos of the crack in shank to show how it looks after cleanup. The excess glue that was on the shank is gone and the crack looks clean. There is a slight ridge on the crack on the underside of the shank. I sanded out the high spots on the ridge on the underside of the shank with a folded piece of 220 grit sandpaper to smooth out the surface. I did the same on the sides of the shank without damaging the stamping on the shank sides.Now it was time to address the damage on the inside of the front edge of the rim and the darkening on the top of the bowl. I gave the edge a slight bevel to obscure the damage. I sanded the rim top with a worn piece of 220 grit sandpaper to remove the darkening.I polished the briar of the bowl and rim top with micromesh sanding pads – dry sanding with 1500-12000 grit pads. I wiped the briar down after each pad with a damp cotton pad.  I polished the silver band with a jeweler’s cloth after the first three pads. I rubbed the bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the bowl sides and shank with my fingertips to clean, enliven and protect the briar. I let the balm sit for a little while and then buffed with a cotton cloth to raise the shine.   I set the bowl aside to work on the stem. I put the stem in the Pipe Stem Oxidation Remover from Briarville USA. I am still experimenting with the product to remove the oxidation that remained on the stem. I let it soak for 1 hour and took it out of the bath and wiped it down with a paper towel. The photos show the stem at this point.  I used some Rub’n Buff Antique gold to touch up the stamps because they were so faint that the white filler that I usually used would not even show on the stem. The stem was in good condition and the tooth marks were light so I figured they would polish out fairly easily. I polished the vulcanite stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem.       This Barling’s Make Ye Olde Wood 216 EL Billiard is a great looking pipe now that it has been restored. The rich, brown stained finish around the bowl is quite beautiful and highlights the gorgeous mix of cross and birdseye grain. The finish works well with the polished vulcanite patented saddle stem. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Barling’s Make Ye Olde Wood Saddle Billiard sits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. I will be putting it on the rebornpipes store shortly. If you are interested in adding this pipe to your collection send me a message or an email. Thanks for reading this blog and my reflections on the pipe while I worked on it. There are many more to come!