Restoring an English Made Hadley Park 213 Lovat


Blog by Steve Laug

The next pipe on the work table came to us from one of Jeff’s pipe hunts a few years ago and to be honest we don’t remember where we got it. This morning as I was going through my box of what I have to work on this one caught my eye. It is a nicely grained small Lovat with an acrylic stem that is almost butterscotch coloured. The stem reminds me of butterscotch candies that I used to have as a kid. The pipe is stamped on the left side of the shank and reads Hadley Park. On the right side it is stamped Made in London England and to the left of that, near the stem is the shape number 213. The finish had a lot of grime ground into the smooth finish on the bowl and some darkening around the sides of the bowl. The bowl was heavily caked and there was a lava coat and darkening on the rim top and inner edge. The edges looked okay but we would know more after the cleanup. There were a few fills that had shrunken around the sides of the bowl. The stem was dirty and had tooth chatter and marks on the top and underside near the button. There were not markings or a logo on the saddle stem. The pipe showed promise but it was very dirty. Jeff took photos of the pipe before he started his cleanup work. He took a photo of the rim top and bowl to give a clear picture of the thickness of the cake and the condition of the rim top and edges. He also took photos of the top and underside of the stem to show the chatter and tooth marks.    Jeff took a photo of the side and heel of the bowl to give a picture of what the briar around the pipe looked like. There is some great grain under the grime.     He took photos of the stamping on the shank. It reads as noted above and is clear and readable.   I could not find any information on the brand. I thought the shape number might point the way but it did not give the clues I was hoping. The Made in London England stamp is similar to those used by a variety of English pipemakers so that is not definitive either. So I am left not knowing who made the pipe. Now it was time to work on this pipe.

Jeff had cleaned up the pipe with his usual penchant for thoroughness. He reamed the pipe with a PipNet Pipe Reamer and cleaned up the remnants with a Savinelli Fitsall Pipe Knife.  He scrubbed the bowl with undiluted Murphy’s Oil Soap with a tooth brush. He rinsed it under running warm water to remove the soap and grime. He cleaned out the inside of the shank and the airway in the stem with alcohol, cotton swabs and pipe cleaners. He soaked the stem in Before & After Deoxidizer and rinsed it off with warm water. I took photos of the pipe once I received it. The rim top and inner edge of the rim showed some damage. The inner edge of the bowl was roughened and showed some darkening. The rim top also showed some damage. The stem surface looked good with some remaining oxidation and tooth marks and chatter on both sides near the button.    I took a photo of the stamping on the shank. It is clear and readable as noted above. I removed the stem and took a photo of the pipe to give a sense of the whole. The stem is a short acrylic saddle.   I decided to start my work on the pipe by cleaning up the damaged inner edge of the bowl. I reworked the edge with a folded piece of 220 grit sand paper. Once I finished the rim and edge looked much better.    I moved next to repairing the damaged fills on the front left of the bowl. I filled them in with clear super glue and briar dust. Once it cured I sanded them smooth and blended them into the surrounding briar.   With the repaired fills being lighter than the surrounding briar I decided to restain the bowl with a light brown aniline stain. I applied the stain and flamed it with a lighter to set it in the grain. I repeated the process until I was happy with the coverage on the bowl. Once the stain had cured I removed it from the cork and took photos of the new look before I buffed or polished it at all.  I buffed the bowl with red Tripoli and then wiped it down with a cotton pad and isopropyl alcohol to make the stain a bit more transparent and show the grain around the bowl sides. I polished it with micromesh sanding pads – wet sanding with 1500-12000 grit pads and wiping it down after each pad with a damp cloth.      I rubbed the bowl and shank down with Before & After Restoration Balm. I worked it into the surface of the bowl sides and shank with my fingertips to clean, enliven and protect the briar. I let the balm sit for 15 minutes and then buffed with a cotton cloth to raise the shine.  I set the bowl aside and turned to work on the stem. I sanded out the tooth chatter and marks with 220 grit sandpaper and started polishing the stem with 400 grit wet dry sandpaper.I polished the acrylic stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with a damp cloth after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem.    This Hadley Park 213 Lovat with an orange/butterscotch acrylic stem is a great looking pipe now that it has been restored. There is some great grain around the bowl and shank. I put the stem back on the bowl and carefully buffed the pipe with Blue Diamond on the buffing wheel using a light touch on the briar. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing the entire pipe with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Hadley Park Lovat is petite but fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 34gr/1.23oz. If you are interested in adding this pipe to your collection send me a message or an email. Thanks for reading this blog and my reflections on the pipe while I worked on it. There are many more to come!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.