Tag Archives: Laxley Pipe Company Pipes

An interesting challenge – joining a broken shank and bowl on a Manx Meerschaum

Blog by Steve Laug

Yesterday afternoon a fellow stopped by for a visit and to show me his collection of Manx  Meerschaum pipes from the Isle of Man. It turned out that his great uncle had worked at the Laxey Pipe Factory which closed in 2002 so he had some of his pipes and some others that he had collected over time. He also wanted to show me sad victim or circumstance – a Manx Billiard that a friend had knocked out of his hand/mouth the night before. The shank had snapped off at the bowl. The break was very clean and there were no extraneous pieces to deal with. It was complete in the two parts. The stem and tenon were undamaged. Fortunately as he transported it to my porch wrapped in a scarf it did not chip or incur further damage. I took photos of it this morning when I brought it to my work table. I had a short piece of metal tubing. It is harder than the average aluminum inner tube and also a bit larger in diameter. It fit well in both sides of the broken airway. I was going to use super glue to anchor it in the bowl half first and let it harden very well. I did not want any slippage back and forth in the airway. I set the bowl aside to let the glue cure on the tube. I filed the tube to roughen it up and to make the fit in the shank part of the break work well. I slide it in place and took a photo of the fit of the shank to the bowl. It looks quite good. I will need to glue it to get a solid repair but it looks like it will work well with no gaps once it is glued.With the restoration going on in my basement shop area I could not put my hands on my epoxy so I went to the local tool shop near my house and chatted with one of the gents there about what I was working on. They had some JB Weld but he recommended a product called Weld Bond. It is good for repairing cracked pottery, stone and even wood. It dries rock hard in 24 hours and is clear once it dries (a bonus on this pipe). I spread the glue on both halves of the broken pipe and painted it on the surface of the tube as well with a tooth pick and worked it into the grooves of the break. I slid the shank piece on to the tube and lined the break up. I pressed the parts together and wiped off the excess glue with a cloth. I held it in place until it bonded the parts together. I pressed the parts together and bound it together with green tape. I wrapped the tape around the entire bowl and shank to hold it tightly in place while the glue cured. I set the bowl aside for 24 hours to let that happen. That is always the hardest part for me as I am impatient and want to move onto the next part. But the wait is on and I am gritting my teeth while I wait.  I set the bowl aside and turned my attention to work on the stem. It had a lot of tooth chatter and light marks on the surface on both sides. I had originally thought the stem was acrylic but it was a nice vulcanite. I “painted’ the surface of the stem with the flame of a Bic lighter to lift them as much as possible. The marks on the underside lifted well. The majority of the top side also lifted. I had a few deeper ones that need a spot of super glue to smooth them out. Once the repair cured I sanded the repairs on the stem with 220 grit sandpaper to blend them into the surface of the vulcanite. I started polishing it with 400 grit wet dry sandpaper. I polished the vulcanite stem with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. I removed the tape holding the repaired shank/stem repair together. It was solid. The crack was only visible on the lower right side and part of the underside. It is filled in but can be seen if you look for it. I filled in the remaining crack in the surface of the meer on the right lower/underside with the Weld Bond glue I used to bind it together. It dries clear so I am looking forward to seeing how it looks afterward.I reamed the pipe with a Savinelli Fitsall Pipe Knife. I cleaned the rim top with the tip of a knife and a brass bristle wire brush. I was able to get back some of the rustication on the top. I have had good success with Before & After Restoration Balm on Meerschaum so I worked it into the surface of the bowl and shank with my finger tips and a shoe brush to clean, enliven and protect the rusticated surface of the meerschaum. I let it sit for 15 minutes and then buffed it off with a soft cloth. It looked very good. This Manx Made Meerschaum Rusticated Billiard is a great looking pipe now that it has been restored. The style of rustication that is used around the bowl is classic Isle of Man rustication from the Laxley Pipe Company. It works well with both the shape and the polished vulcanite stem. I put the stem back on the bowl and carefully hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Manx Made Meerschaum Billiard is another pipe that fits nicely in the hand and feels great. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 61 grams/2.15 ounces. I will be giving the fellow a call who dropped it off. I think he will enjoy the repair of one of his favourite pipes. Thanks for reading this blog and my reflections on the pipe while I worked on it. There are many more to come!

Restoring a Millennium of Tynwald Black, Faceted Meerschaum Bent Billiard

Blog by Steve Laug

The next pipe I have chosen to work on is an interesting faceted Black coloured Meerschaum Bent Billiard. It is a pipe that we found somewhere along the journey but have no record of when or where we picked it up. It is a classic Manx style African Meerschaum pipe. It was stamped on the ferrule on the shank end had had the Manx running legs logo and read Millennium [arched over] Of Tynwald in a circle around the . It was in great condition when I brought it to the table. There was a heavy cake in the bowl and some lava on the rim top and edges of the bowl. The brass coloured ferrule was in good shape but had scratches that would need to be polished. The stem had the same running legs logo on the top of the saddle. There was some oxidation and calcification on the stem surfaces as well as light chatter and tooth marks near the button on both sides. I took photos of the pipe before I started my work. I took photos of the rim top and stem to show the general condition of the pipe. The bowl is heavily caked and the rim top and edges have a thick lava overflow. The stem is oxidized, calcified and has tooth marks on the top and underside near the button.  I took photos of the stamping on the left side of the brass ferrule. It reads as noted above. I also captured the stamping on the stem to show the running legs logo there as well. I removed the stem and took a photo of the pipe to have a look at the parts and overall look. I did a quick search on Google to see what I could learn about the Millennium Of Tynwald brand. The first link I found was for one that was on Worthpoint that had a fascinating description of the brand (https://www.worthpoint.com/worthopedia/meerschaum-pipe-manx-millennium-1979-464084331). I include a portion of that quote below.

Manx Tynwald Millennium Meerschaums Pipe. The pipe will probably date from 1979 the year of the Millennium. Made in the Isle of Man by J Laxey & Co. Meerschaum production ceased in 2002. From the 1960’s they produced bowls for Barlings and Petersons among others.

I am not sure how the year 1979 is linked to the Millennium but somehow the write above associates that and dates his pipe. I am not clear about the dates of the pipe. I know that it was made prior to 2002 when the Laxey Factory closed.

I turned then to Pipephil and did a quick search there for information linking the Millennium brand stamp with Manx (http://www.pipephil.eu/logos/en/nonbriar/meer.html). Sure enough the link was there. I have included a screen capture of a pipe with the same ferrule and stem stamp as the one that I am working on. I also included a note from the sidebar.Laxey Pipe Factory (closed in 2002). Other brands from the factory: “Manxpipe”, “Manxman”, “Manxland”. See also: Man Pipes

I turned to Pipedia to have a read about the history of the Laxey Pipe Company on the Isle of Man (https://pipedia.org/wiki/Laxey_Pipes_Ltd.). There was a short history of the brand that I included below.

Laxey Pipes Ltd. resided in a historical 19th century four-storey Man stone building at The Quay, Old Laxey, Isle of Man, which thankfully has been preserved.

The company specialised in the production of meerschaum pipes using the Meerschaum mined by the Tanganyika Meerschaum Corporation in the Amboseli basin in Tanganyika (since 1964 part of the United Republic of Tanzania).

Please note: you may often find names like “Manx Pipes Ltd.”, “Man Pipe Co.” and others more, but there is no indication of another Isle of Man pipe producer other than Laxey Pipe Ltd. at any time!

 Laxey Pipes Ltd. marketed own brands like “Manxpipe”, “Manxman”, “Manxland” e.c. Names like “John Bull”, “White Knight” (unwaxed), “Domino” (black, or lined) indicated some shapes / colours of Laxey’s own series. The stems either showed the astronomical sign for “male” or “man” (circle + arrow), or the crest of the Isle of Man, the 3-legged X in a circle. Manxpipes and Laxey’s other brands were available through pipe retailers in general, but also were sold (mainly) to tourists through their own shop in Laxey.

Furthermore Laxey Pipes Ltd. manufactured the meer bowls for Peterson, Barling, Nørding and others from the later 1960’s until 2001. Man Pipe e.g. was a brand distributed by Comoy’s. The bowls usually showed no nomenclature indicating the orderer. “Genuine Block Meerschaum” was engraved frequently. Often, just the stems were different, while bowls were the same.

Supply of meerschaum from East Africa ran out (Kenya / Tanzania exhausted, Somalia inaccessible), and thus the last Laxey meers were supplied to trade in May, 2001. Laxey Pipes Ltd. tried to survive continuing with briar pipes – mainly in the Danish style -, but to no success. It closed down business in July, 2002.

After publishing this blog I received a response on Facebook about the stamp on the ferrule and more information about the brand and logo. I quote from Adrian Sacco

The millennium referred to is the 1000th anniversary of Tynwald, the Isle of Man parliament. It’s the oldest/longest continuous government in the western world. The Isle of Man is a self-governing British crown dependency located between Great Britain and Ireland. It is not part of the UK…  Just to add, the famous “three legs” is the symbol of the Isle of Man. It’s called a triskelion. The Manx motto is “quocumque jeceris stabit “ which translates “whichever way you throw me I stand”. This reflects the resilience often found in small island nations.

Thanks Adrian for the added information on the pipe. Very helpful.

Armed with that information, I started my clean up of the pipe by reaming it with a PipNet reamer and cut back the cake back to the bowl walls. I further cleaned up the walls with a Savinelli Fitsall Pipe Knife. I finished the cleaning of the bowl with a piece of dowel wrapped in 220 grit sandpaper. I smoothed out the bowl walls and checked for cracks and flaws. All looked very good. I cleaned off the build up in the rim top with the edge of the Savinelli Fitsall knife and scrubbed it with cotton pads to remove the residual grime. I looked better but there was more work to do. I scrubbed the interior of the bowl, shank and stem with pipe cleaners, cotton swabs and alcohol to remove the tars and oils. It was full of tars and oils that with a bit of work came clean. I worked some Before & After Restoration Balm into the surface of the bowl with my fingertips to clean, enliven and protect the finish. I let the balm sit for 15 minutes and then buffed with a cotton cloth to raise the shine. The photos show the bowl at this point in the restoration process. You can see the interesting carved lines on each of the facets of the bowl. It adds an almost primitive touch to the bowl.      I polished the nickel ferrule with micromesh sanding pads with a jewelers cloth to remove the oxidation and give it a shine.   I set the bowl aside and turned my attention to the stem. I scrubbed it with Soft Scrub cleanser to remove the oxidation and light calcification. It took a lot of oxidation off the stem as can be seen in the photos.   I sanded the light tooth marks and chatter out of the surface and removed the remaining oxidation with 220 grit sandpaper. I started the polishing of the stem with 400 grit wet dry sandpaper.   I touched up the running legs logo with white acrylic fingernail polish. Once it cured I scraped it off and polished it with a worn 1500 grit micromesh pad. I polished the stem with micromesh sanding pads – wet sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil.  I am excited to finish this Laxey Pipes Millennium Of Tynwald Black Faceted Meerschaum. I put the pipe back together and buffed it lightly with Blue Diamond on the buffing wheel. I gave the bowl multiple coats of Conservator’s Wax and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad to deepen the shine. I hand buffed the pipe with a microfiber cloth to further raise the shine. It is fun to see what the polished bowl looks like with etched facets all around it. Added to that the brass coloured ferrule and the polished black vulcanite stem and you have a beautiful pipe. This Millenium Of Tynwald Meerschaum is great looking and the pipe feels great in my hand. It is light and well balanced. Have a look at it with the photos below. The dimensions are Length: 5 inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 51 grams/1.80 oz. It is a beautiful pipe and one that I will be adding the British Pipe Makers section of the rebornpipes store. I you are interested in adding it to your collection please let me know. Thanks for walking through the restoration with me as I worked over this pipe and for reading this blog.