Blog by Steve Laug

The next pipe on the table is a nice looking smooth Bent Bulldog with a vulcanite saddle stem. We picked it up on 11/10/2022 from a seller in Copenhagen, Denmark. The stamping on the left side of the shank is readable. It read BBB in a diamond [over] 100 Years. On the right side the stamping reads Made  In England [over] the shape number 560. The black vulcanite saddle stem stamped with a faint BBB in a diamond logo the left side. The pipe has a medium reddish brown stained finish that shows the grain on the bowl sides and shank. It is light weight and comfortable pipe to hold. Jeff sent me the following photos of the pipe to show the condition it was in before he worked on it. This is what I saw when I looked over the pipe.

1. The smooth finish had grime ground into briar and hand oils around the sides. The stain is dull and the grain patterns though visible under the grime are obscured around the bowl sides and shank.
2. The rim top was very dirty with a heavy lava coat on it. It is heavier on the back side. The inner edge of the bowl and top show potential damage, though it is hard to see the extent through the thick build up of cake that has overflown the rim top.
3. There was a thick cake in the bowl. The bowl itself was very dark and dirty. Once the bowl was cleaned up we could confirm the condition of the bowl walls.
4. The vulcanite saddle stem was filthy, oxidized, calcified and had tooth marks and chatter on both sides and on the button surface.
5. There is a BBB in a diamond logo on the left side of the stem. It is white and I am uncertain if it is a stamp or if it is a decal of some sort. The common BBB brass inset is not present on this pipe.

To summarize what I saw – this BBB 100 Year Bent Bulldog is a well-made pipe. The bowl and stem are very dirty which says to me that the pipe was once again someone’s favourite pipe. The look and feel of the pipe in the hand is great. It should clean up very well. Here are photos of the pipe taken before Jeff started the clean up.  Jeff took close up photos so that I could have a clearer picture of the condition of the bowl, rim edges and top. The rim top photos confirm my assessment above. The cake in the bowl is thick – covering the walls of the bowl. The rim top has thick lava coat overflowing and covering the inner edge. It is heavier toward the back of the bowl. It is hard to know the condition of the inner edge in this condition. There appeared to be some damage on the top and inner edge toward the back but I would not know for sure until it was reamed. This is what I look for when assessing a pipe. I look forward to viewing it in person after the clean up work.The vulcanite taper stem is dirty, oxidized and calcified. There are light tooth marks and chatter on both sides ahead of the button and on the button surface itself. Once again instead of telling you what I see in the next photos of the sides of the bowl and the heel I want to hear from you. Tell me what you see? What does the finish look like to you? Are there any visible problems or issues that stand out to you? Are there cracks or scratches in smooth finish of the bowl? Are there visible flaws or fissures in the briar? What does the finish look like? Is there a pattern to it? Any visible issues on the heel of the bowl? These questions should help you to see what I am looking for when I see these photos. He took photos of the stamping on the left and right side of the shank. It is stamped as noted above. The vulcanite stem shows a BBB diamond logo stamp on the top left side of the diamond shank. What stands out for you in the photos of the stamping? What do you look for in the stamping? It is dirty but what do you see underneath the grime on the surface of the briar? Before I started my work on the pipe I turned to a blog I posted on the history of the BBB brand (https://rebornpipes.wordpress.com/wp-admin/post.php?post=2204&action=edit). It is a translated piece on the history that I have found quite helpful. It gives a good survey or overview of the brand from its inception to the end as an independent brand.

I also remembered that a few years ago Briar Books Press reprinted a small booklet entitled 100 Years in the Service of Smokers. The subtitle on the bottom of the cover read Adolph Frankau of London Celebrate their Centenary. At the top is the classic BBB in a Diamond logo with a banner below it with the dates 1847 on the left of the Diamond and 1947 on the right of the Diamond. I took it out and gave it a read to get a sense of the 100 years of history. I did a screen capture of the cover and have included it below.
Quoting from page 5 of the book in a section entitled: Through Five Reigns to the Present Day

And so throughout the five reigns the house of Aldoph Frankau ministered faithfully and famously to the needs of smokers in every land and clime right up until the outbreak of World War II. Through the vicissitudes  of this period, and absence of staff on war service, the Company was ably steered by Mr. Fryd a Director and the Company’s Secretary, Mr. Howles, now also a director.

On the last page of the booklet there is a poster for the BBB 1847-1947 Centenary Pipe. The pipe in the poster has a similar stamping to the one I am working on and the logo on the side of the stem is the same white decal style logo – BBB in a Diamond.

Armed with that information it appears that the pipe I am working on is one that could have been issued in 1947 as a Centenary Pipe or perhaps it is a later copy of that period pipe. My guess is the former. It has the look of an older BBB rather than a Cadogan era pipe. Now it was time to work on it.

I am sure many of you will shake your head and ask maybe even out loud, “Why is he including this again?” However, please remember that the point of these blogs is not to wow you with the work or make you shake your heads but I want you to know the details of the work we do so you can do your own. Back in 2020 Jeff wrote a blog about his cleaning process. I am including a link to that now so you can see what I mean about his process. Do not skip it! Give it a read (https://rebornpipes.com/2020/01/20/got-a-filthy-estate-pipe-that-you-need-to-clean/). Here is the introduction to that blog and it is very true even to this day.

Several have asked about Jeff’s cleaning regimen as I generally summarize it in the blogs that I post rather than give a detailed procedure. I have had the question asked enough that I asked Jeff to put together this blog so that you can get a clear picture of the process he uses. Like everything else in our hobby, people have different methods they swear by. Some may question the method and that is fine. But it works very well for us and has for many years. Some of his steps may surprise you but I know that when I get the pipes from him for my part of the restoration they are impeccably clean and sanitized. I have come to appreciate the thoroughness of the process he has developed because I really like working on clean pipe!

For the benefit of some of you who may be unfamiliar with some of the products he uses I have included photos of three of the items that Jeff mentions in his list. This will make it easier for recognition. These three are definitely North American Products so you will need to find suitable replacements or order these directly on Amazon. The makeup pads are fairly universal as we were able to pick some up in India when we were with Paresh and his family.

In the blog itself he breaks his process down into two parts – cleaning the stem and cleaning the bowl. Each one has a large number of steps that he methodically does every time. I know because I have watched him do the work and I have seen the pipes after his work on them. He followed this process step by step and when the pipe got to me it was spotlessly clean and ready for my work. The inside of the stem, shank and bowl were clean and to me that is an amazing gift as it means that my work on this end is with a clean pipe! I cannot tell you how much difference that makes for my work.

1. The finish is clean and the oils and grime in the finish shows the beautiful grain around the sides. The medium brown stain highlights the grain.
2. The rim top was clean and amazingly there was no edge damage. There was only some darkening around the inner edge of the bowl.
3. The cake in the bowl has been removed and the bowl is very clean. The walls of the bowl are smooth and appear to be undamaged and show no checking or burn damage.
4. The vulcanite saddle stem looks better and there is only light tooth chatter on both sides visible.
5. The white painted/decal BBB logo on the top left side of the diamond stem is gone leaving only a faint ghost of the original decal that is readable in bright light.

Hopefully the steps above show you both what I look for when I go over the pipe when I bring it to the work table and also what I see when I look at the pipe in my hands. They also clearly spell out a restoration plan in short form. My work is clear and addressing it will be the next steps. I took photos of the whole pipe to give you a picture of what I see when I have it on the table. This is important to me in that it also shows that there was no damage done during the clean up work or the transit of the pipe from Idaho to here in Vancouver. I carefully went over the bowl and rim top to get a sense of what is happening there. In this case once the rim top and edges were cleaned the inner edge had some darkening all the way around. I also went over the stem carefully. The fit of the stem is snug and the transitions are smooth. There was light tooth chatter on the surface of the stem on both sides. The vulcanite stem surface was clean and looked better. I took photos of the rim top and stem sides to show as best as I can what I see when I look at them. As is my habit check to make sure that the clean up work did not damage the stamping on the shank sides in any way. They are in excellent condition and are very clear and readable. I love just looking at the lay of the pipe and the proportion of the hand made pipes. I took the pipe apart to get a sense of what was in the mind of the pipe maker when he crafted the pipe. The photo shows its beauty in flow and shape. You can see the faint ghost of the BBB Diamond logo on the left side of the saddle stem. I started working on this pipe by turning to the bowl. I chose to deal with the damage on the inner edge and top of the rim. I used a piece of 220 grit sandpaper to remove the darkening on the inner edge and the damage on the top. I gave the rim a slight bevel to minimize the damage. It took a little work but I was able to remove the damage. It looks much better after I worked it over.I polished the briar with micromesh sanding pads. I choose to dry sand the briar rather than wet sand it. Again it is a matter of personal preference. I prefer to use the pads dry and find they work very well on the briar. I sand with each pad (9 in total) and group them by threes for ease of reference. I wipe the bowl down after each pad with a damp cloth to remove the sanding debris and check the briar. I love seeing the developing shine on the briar as I move through the pads which is why I include so many photos of this step. I rubbed down the bowl and shank with Before & After Restoration Balm. It is a paste/balm that is rubbed into the surface of the briar. The product works to deep clean the finish, enliven and protect the briar. I worked it into the briar with my finger tips and into the twin rings with a shoe brush. I let it sit for 10 minutes then wiped it off with a soft cloth then buffed it with a cotton cloth. The briar really began to have a deep shine in the briar and the grain shines through. The photos I took of the bowl at this point mark the progress in the restoration. It is a gorgeous pipe.   I set the bowl aside and turned to the stem. It was in great condition and the majority of the tooth marks and chatter were shallow enough that most would disappear by polishing with micromesh and buffing. There was one deep mark against the button edge on the top of the stem. I filled it in with clear CA glue and set it aside to cure. Once cured I flattened the repair with 220 grit sandpaper and started the polishing with 600 grit wet dry sandpaper. It looked much better.I polished the stem with micromesh sanding pads – 1500-12000 grit sanding pads and water to wet sand the stem. I wiped it down after each sanding pad with Obsidian Oil on a cotton rag after each sanding pads. I know that many say Obsidian Oil does nothing for acrylic stems, but I find it does two things – first it gives some protection to the stem from buildup and second it gives the sanding pads bite in the polishing process. After finishing with the micromesh pads I rub the stem down with Before & After Fine and Extra Fine stem polish as it seems to really remove the fine scratches in the vulcanite. I rub the Fine Polish on the stem and wipe it off with a paper towel and then repeat the process with the Extra Fine polish. I finish the polishing of the stem down with a final coat of Obsidian Oil and set the stem aside to let the oil absorb. This process gives the stem a shine and also a bit of protection.  The final steps in my process involve using the buffer. I buffed the bowl and stem with Blue Diamond to polish out the light scratches in the briar and the vulcanite. I gave the bowl and the stem multiple coats of carnauba wax. I have found that I can get a deeper shine if I follow up the wax buff with a buff with a clean buffing pad. It works to raise the shine and then I hand buff with a microfiber cloth to deepen the shine. It is always fun for me to see what the polished bowl looks like with the polished stem. It really is a nice pipe. The smooth finish around the bowl sides and shank looks great. The oval vulcanite taper stem works well with the pipe. The BBB 100 Year Bent Bulldog 560 feels great in my hand. It is a well balanced pipe. Have a look at it with the photos below. The dimensions are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 1.34 ounces/38 grams. It is a beautiful pipe that I will soon be adding to the rebornpipes store in the British Pipemakers Section. If you would like to add it to your collection let me know. It should be a great smoking pipe.

As always I encourage your questions and comments as you read the blog. Thanks to each of you who are reading this blog. Remember we are not pipe owners; we are pipe men and women who hold our pipes in trust until they pass on into the trust of those who follow us.