Daily Archives: August 28, 2021

A 3 Pipe Reclamation Project – The next is a D.P. Ehrlich & Co. Meerschaum Bulldog

Blog by Steve Laug

With the completion of a beautiful Octagonal, horn stemmed billiard as another  break from the routine of these meerschaums (https://rebornpipes.com/2021/08/28/reviving-an-unsmoked-nos-octagonal-billiard-with-a-horn-stem/) it was time to go back to the D.P. Ehrlich Meerschaum reclamation work. I will quote the next paragraphs to give context to the pipes that I am working on in this project.

Not long ago I received a Facebook Message from a friend asking if I would consider restoring three Ehrlich meerschaums that he had. He spoke about first, then sent photos as he knew I was not presently taking on any new work due to my heavy schedule. He described the first cased set – which contained a Bulldog and a Billiard with great patina and cloudy acrylic stems. It sounded amazing. He described the second cased single – a Poker with the same kind of stem. At least one of the stems had a bite through on it. All were heavily smoked and dirty. From his reckoning the pipes came from at least two different time periods in D. P. Ehrlich of Boston’s long life. I thanked him for thinking of me and gently said I would not be able to do the work.

He understood but wanted me to have a look at them anyway. He sent these photos of the pipes in their cases on Messenger. They were indeed beautiful pipes. They were also very tempting. I really like these cased older style, smooth, classic shaped meerschaums. I did not reply to him for a bit and thought it over. I looked over my schedule and calendar for the next two months and it was very heavy. But… I was hooked. I finally answered him and basically said if he was not in a hurry I would be willing to take them on. He replied that he was in no hurry. You have to understand when I have pipes to work on here I squeeze them in somehow but I wanted freedom.Once I gave my answer he sent a few more photos of each of the pipes so that I could have a look at what was coming my way. He sent the tracking number of the pipes as well. They arrived safely and I went over them and called him to talk about what I saw. I restored the Poker first and then the Billiard. I have written about the restoration of both on rebornpipes. Here is the link to those blogs (https://rebornpipes.com/2021/08/26/reclamation-project-an-older-d-p-ehrlich-co-cased-meerschaum-poker/ and https://rebornpipes.com/2021/08/27/a-3-pipe-reclamation-project-next-a-d-p-ehrlich-co-meerschaum-billiard/).

Now to have a look at the Bulldog (the second pipe in the cased 2 pipe set). He took some photos of the bowl, rim top and stem so I could assess the condition they were in. I have included them below. The lava on the rim top and cake in the bowl are very thick and I am hoping they have protected the inner edge and top from damage. The 14K gold ring on the shank looked very good. The stem had tooth marks and chatter on both the top and underside near the button. It is by far the best looking stem of the threesome. The fit at the shank is very good. The cloudy gold stem material looks good. This stem material can be problematic in that the yellow colour often is on the top surface and once there are repairs done or sanding they are visible and significantly different in colour from the rest of the stem. Once I had it in hand and checked it out I would know more.While I have worked on a significant number of Ehrlich briar pipes over the years I have not tackled a meerschaum let alone three older ones. I have worked on a lot of meers but not Ehrlich meers (with this one I have worked on three). I actually knew very little about them. They looked like European made meers that come out of Austria but I was unclear of where Ehrlich got these pipes. I was time to due some work on this. I checked first on Pipephil and found only information on the briar pipes. Then I turned to Pipedia and was more successful (https://pipedia.org/wiki/Ehrlich%27s). I quote a portion of that article below that gives a bit of history and more importantly cleared up where the pipes came from for me.

The David P. Ehrlich story – Pipemakers and Tobacconists for a Hundred Years, 1868-1968.

The David P. Ehrlich Company has remained solely in the hands of one family during its century of business, yet it has had several firm names and locations. David P. Ehrlich went to work in 1881 at the age of twenty for Ferdinand Abraham, who dealt in cigars and tobacco and who had begun business in 1868 at 1188 Washington Street in the South End, but in 1880 moved to the center of the city, where the firm has been ever since. David Ehrlich married the boss’s daughter. In 1916 the name became the David P. Ehrlich Company and Mr. Ehrlich devoted the rest of his life to this business. Since David’s death in 1912 it has been owned by – his nieces and nephews including Richard A. and William Ehrlich.

Ehrlich shop has since 1880 had a predilection for historic sites. 25 Court Street was close to the spot where from 1721-1726 James Franklin had, with the assistance of his brother Benjamin, published The New-England Courant. In 1908 the firm moved a few doors up Court Street to number 37, on the opposite corner of the alley that is grandiloquently named Franklin Avenue. This new location was on the site of the one-time printing office of Edes and Gill, publishers of the Boston Gazette, in whose back room some of the “Indians” of the Boston Tea Party assumed their disguises. Soon after the end of World War II at which time the store was located at 33 Court Street a move around the corner to 207 Washington Street brought the shop diagonally across from the Old State House and onto the site occupied from 1610-1808 by the First Church of Boston. The demolition of 207 Washington Street in 1967 caused still another move to 32 Tremont Street, adjoining King’s Chapel burying Ground, which is the oldest cemetery in Boston.

The David P. Ehrlich Co. has not just occupied sites intimately associated with Boston history and institutions; it has in the past century become a Boston institution in its own right. It has specialized in fine cigars, pipes, and pipe tobacco. In addition to the retail business, the firm has long specialized in the manufacture of pipes, both from Algerian briar root and from meerschaum, a beautiful white fossilized substance, mined from the earth in Turkish Asia Minor. Meerschaum lends itself to carving, and in the nineteenth century there developed in Austria a fashion for carving pipes from it with formidably intricate decoration.

The Ehrlichs have long had meerschaum carvers, who ply their craft in the shop window to the delight of passersby. For years the bearded Gustave Fischer was a familiar figure in the window at 33 Court Street. A succession of craftsmen have continued the tradition. and still make and repair pipes in the window of the new Tremont Street shop. They still turn their meerschaum pipes by hand on a foot operated wooden lathe made in Austria about 1871. Although briars are today turned on power lathes, meerschaum can only be turned on a foot-operated lathe.

I did a search on Google to see if I could find further documentation on the Ehrlich Meerschaum pipes. I came across a PDF of a 1960s Ehrlich Catalogue that had some helpful sections on the pipes(https://docs.google.com/file/d/0B0xEzQgGtOv8LXNhLUNJQUJrU1U/edit?resourcekey=0-I8eh7aQxyrEcmVW7-SKjFw). I did a screen capture of two of those sections. The first is a great descriptive paragraph on the pipe regarding both the meerschaum and what they call a handmade cloudy yellow stem. The prices are astonishingly low even for those days. The second screen capture is about how the pipes were made on a wooden lathe made in Austria and operated by Ehrlich craftsmen in the window of the Boston shop. It is also a great read.I took the pipe out of the case and took some photos of it to chronicle the condition it was in when I received it. It is another large pipe. I would say it is another large pipe – at least a Dunhill Group 4 or larger. I spent some time going over it carefully. The bowl indeed had a thick cake and the lava coat on the edge and rim was thick as well. It was in worse condition than either the Poker or Billiard had been. There were light surface scratches in the meerschaum all around the bowl and shank sides. The meerschaum was dirty with smudges and dust but underneath it had a nicely developing patina on the shank and heel of the bowl and was beginning to get some colour on the bowl. The stem was the best of the lot. It had tooth marks on the top and underside ahead of the button. I removed the stem from the shank and had a look at the parts. The threaded metal tenon was inset permanently in the shank of the pipe. It was dirty and the pipe had a musty/old tobacco smell. There was a 14K gold wedding ring style band on the shank for decoration. The shank was filthy as was the airway in the stem. The good news for me was that the stem material was solid yellow all the way through so repairing the tooth marks and chatter would be easier. The slot in the stem was filled in partially with debris. Overall it was a great looking pipe that would clean up well. Here is what I saw. I took a close up photo of the bowl and rim top to capture the condition of both. You can see the thick cake in the bowl and the lava on the inner edge and thick on the top and inner edge of the rim. It is by far the most caked and lava covered of all of them. I took photos of the shank and stem as well. You can also see the tooth damage on both sides ahead of the button. I removed the stem from the shank and took a photo of the proportions of the pipe. You can see that it is a large bowl but well proportioned with the stem. I like the looks of it.I started my clean up work on the pipe by reaming the bowl. I wanted to remove the cake completely from the walls of the bowl and clean it thoroughly. I began the reaming with a PipNet pipe reaming set. The bowl is quite large so I used the second and third cutting head. I took it back to the walls. I cleaned it up further with a Savinelli Fitsall Pipe knife. I finished by sanding the interior of the bowl with 220 grit sandpaper wrapped around a dowel. I used the Fitsall knife to carefully scrape off some of the lava on the rim top. It is very thick. I used micromesh sanding pads to remove the remaining lava coat on the rim top and to polish the light scratching around the bowl. I polished the meerschaum with 1500-12000 grit pads wiping it down after each pad with a damp cloth to remove the debris and dust. The bowl and shank began to really take on a shine as I worked on it. (As I mentioned in the previous blogs, my friend and I spoke on the phone and the decision was made to leave the light scratching as part of the story of the pipe.) With the exterior clean I worked on the inside of the shank and stem. The airway on the bottom of the bowl was plugged so I needed to get the airflow open again. I used a curved dental pick to open the airway in bowl bottom. I used isopropyl alcohol, pipe cleaners and cotton swabs to open the airway in the shank and into the bowl and to remove the debris and oils. I cleaned out the end of the stem where the tenon screwed in with cotton swabs and alcohol. Once finished the pipe smelled clean. I filled in the tooth marks on the top and underside of the stem near the button with clear CA glue. Was aiming for smoothing out the tooth marks and making them invisible.Once the repair cured I smoothed out the repair and worked to blend it into the stem with micromesh sanding pads. I smoothed it out with a 1500 grit pad first the polished it with the remaining pads 1800-12000 grit. I wiped it down with a bit of Obsidian Oil to remove the debris after each pad. I was quite pleased with the look of the repaired stem. With the stem finished and the bowl completed to this point it was time recoat the bowl with beeswax. I melted a chunk of beeswax in the microwave and brushed the melted wax onto the bowl and shank. I took photos of the thick wax coat around the bowl sides and top. I look forward to seeing what happens when I melt it off! I used my heat gun on the low setting to melt the excess wax and heat the meerschaum to absorb the wax. I put a thick layer of paper towels below the heat gun to catch the dripping of the wax. I used a cork in the bowl as a handle to turn the pipe over the heat. As the heat and wax did the work the bowl began darken. I took some photos of the bowl when I had finished. It is a beauty. This D.P. Ehrlich Co, Boston Made Meerschaum Straight Bulldog turned out really well and it is a great looking pipe with a great shape to it. The deepening patina around the bowl and shank has been highlighted by the wax and will only deepen with use. The smoky yellow coloured acrylic stem looks good with the darkening bowl and shank. I put the stem back on the bowl and carefully buffed the pipe with a clean buffing pad to raise the shine. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Ehrlich Meerschaum Bulldog is comfortable to hold and is quite distinguished looking. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: 1 inch. The weight of the pipe is 50 grams/1.76 ounces. This is the third D.P. Ehrlich Co. Meerschaum I have finished. Now that the last one is finished I will be packing them carefully and sadly saying farewell to some beautiful pieces. I think the pipeman who is carrying on the trust of these beauties will thoroughly enjoy them. Thanks for reading this blog and my reflections on the pipe while I worked on it.

Comoy’s 284 Tradition Restoration & Addition

By Al Jones

This Comoy’s, a Tradition finish shape 284 is one of my favorite of the British Rhodesians. It was sold in a group of pipes on Ebay and the listing didn’t detail the shape number. I forgot to take “before” pictures, so below are the cropped photos from the Ebay listing.

The briar was in great shape, but the nomeclature was a bit worn, so I’d have to be careful in that area. The stem was worn, but had no issues. The multi-piece, drilled C stem logo and COM stamp date this one have been made from 1946 to the merger in 1981. I’ve had a number of 284’s in the past, but this one has a thicker shank than the others, almost like a mini shape 499.

I reamed the slight cake and soaked the bowl with sea salt and alcohol. Following the bowl soak, the shank was cleaned with a brush dipped in alcohol, until it came out clean.

The stem was mounted to remove the minor oxidation. I used some 800 grit wet paper, wrapped around a flat needle file to add a bit more shape to the button. The stem was then sanded with 800, 1000, 1500 and 2000 grade wet paper, followed by 12,000 grade micromesh. The stem was then buffed with White Diamond and Meguiars Plastic Polish.

The bowl was lightly buffed with White Diamond and several coats of Carnuba wax. My intent was to resell the pipe, but unless I get a strong offer, this one is staying in my collection.

Below is the finished pipe.

Reviving an Unsmoked NOS Octagonal Billiard with a Horn Stem

Blog by Steve Laug

I took a short break from the D.P. Ehrlich Co. Meerschaum pipes after completing the second one – an older Billiard with a replacement stem (https://rebornpipes.com/2021/08/27/a-3-pipe-reclamation-project-next-a-d-p-ehrlich-co-meerschaum-billiard/). I turned to work on some interesting older pipes that I have had around here for a long time. The first of them is an unsmoked, new old stock (NOS) Octagonal Billiard that is stamped on the right side of the shank with the following numbers: 112D/707C/75. There is no other stamping on the shank of the pipe. There is an Electroplated silver band that has the EP stamp in a diamond over a series of faux hallmarks. This leads me to believe that the pipe is American Made – but that is just a guess. The finish is faded and tired from sitting in storage for many years but it is quite stunning. I has an eight sided paneled bowl with some interesting rusticated patches around the top of the bowl and down into four of the panels. The rim top is inwardly beveled and quite delicate looking. The stem is horn and the tenon is threaded bone. It is anchored in the shank and the stem screws onto it. There is a red sticker on the underside of the stem but anything that was written on it is faded and gone with time. It is a beauty that I want to refresh and add to my own collection. Here are a few photos of the pipe before I did anything to it. I took photos of the bowl and stem. You can see the inwardly beveled rim top and the octagonal outer edge. The drilling is bang on and centered in the bottom of the bowl right at the bottom of the bowl. It is a good sized bowl. The interior walls of the pipe are smooth and do not have customary drilling marks or checks or chips. It has been sanded. The horn stem is in excellent condition and has a slotted button. There is an orange tag on the underside of the stem.I took photos of the sides of the shank. I took a photo of the left side of the shank and the carving on the bowl sides. There is no stamping on the left side. You can see the faux hallmarks on the band. The stamping on the right side of the shank are clear and readable.I removed the stem from the shank. You can see the brand new threaded bone tenon in the photo below. The proportions of this pipe are well done. The grain around the bowl is very nice. The carving is quite unique. There are many things about the pipe that remind of older C.P.F. pipes. While the stem was removed I rubbed the briar down with Before & After Restoration Balm. I worked it into the finish with my fingertips. The product works to clean, enliven and protect briar finished. I let it dry for 10 minutes then buffed it off with a cotton cloth. The grain on the bowl really came alive with the buffing. It is really a beautiful pipe. I did a quick polish on the horn stem with micromesh sanding pads – 1500-12000 grit pads. I wiped the stem down after each pad with Obsidian Oil to protect and enliven the horn. It came out looking very good. This interesting octagonal horn stem billiard that is stamped 112D/707C/75 turned out really well and it is a great looking pipe with a great shape to it. The fact that it is New Old Stock (NOS) is an additional bonus. The grain on the briar and the sheen on the horn stem really popped when the pipe was buffed with blue diamond on the buffing wheel. I gave the bowl and stem multiple coats of carnauba wax and buffed it with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Octagonal Billiard and horn stem is comfortable to hold and is quite distinguished looking. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 6 inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 31 grams/1.09 ounces. This is a beautiful pipe that will fit nicely into my older American pipe collection. Thanks for reading this blog and my reflections on the pipe while I worked on it. Keep an eye out on the blog as I have several other older horn stemmed pipes that will be coming up soon. When I put the stem back on the tenon. the tenon turned in the shank and I was able to turn it to the right and remove the stem from the shank with the tenon in place. I took photos of the stem with the tenon in place.