by Steve Laug

The next pipe on the table came to us from a seller in Caldwell, Idaho, USA on 07/12/2025. It is a Dunhill Shell Briar Billiard with a gold ferrule and gold capped spigot stem that looked very good. It is in good condition as can be seen in the photos below. It is stamped on a smooth panel on the underside of the shank. On the heel of the bowl it is stamped with the shape number 60 F/T followed by Dunhill [over] Shell Briar [followed by] Made in England¹². The stamping is clear and readable. The pipe has a mix of black, cordovan and brown stains on a Shell sandblast finish and some amazing grain that the shape follows well. The finish was dusty and lightly dirty with grime in the nooks and crannies of the sandblast. The bowl had a moderate cake and there was lava in the sandblasted rim top and edges. The gold ferrule and stem cap are tarnished but otherwise looks good. The ferrule is stamped 14K with makers mark. The original stem is on the pipe and it is dirty and has spots of grime stuck on the surface of the vulcanite. I took photos of the pipe to show what it looked like before I started working on it. I took photos of the bowl and rim top to show the thickness of the cake and the lava coat on the rim top. There was some tobacco debris in the bottom of the bowl. The gold ferrule on the shank is shown and is slightly tarnished. The stem photos show the condition of the spigot cap and the top and underside of the stem ahead of the button. The photos of the sides and heel of the bowl show the deep sandblast grain on the pipe along with the contrasting gold ferrule and stem cap. There was a lot of grime ground into the bowl sides. But it still did not obscure the beauty of the pipe. The stamping on the heel of the bowl and shank was clear and readable as noted above. The gold ferrule on the shank and cap on the stem looks good. I took a photo of the pipe with the stem removed to give a sense of the proportions of the pipe. It is a real beauty.One of the first things I like to do is to unpack the stamping and understand each element in it. I turned to Pipephill helpful site (http://pipephil.eu/logos/en/dunhill/shell-briar1.html). The stamping is interpreted as follows: The 60 is the shape for a taper stem Billiard. The F/T is the stamp for a fishtail type stem. The Dunhill Shell Briar is the finish. Following the Made In England¹² gives the year that the pipe was made.

The dating chart helped me understand the date stamp ^12.. I have included the chart below for you to follow (http://www.pipephil.eu/logos/en/dunhill/cledat-en1a.html). The second column is where the 12 year suffix fits. To arrive at the date the suffix is added to 1960 making the pipe a 1972 Shell Briar Spigot.I googled Dunhill Gold Spigot pipes and the search came up with this AI description of the brand and design.

Dunhill Gold Spigot pipes are high-end, collectible briar pipes featuring an 18k or 14k gold tube (spigot) inserted into the mouthpiece, signifying luxury, superior craftsmanship, and excellent smoking quality, often appearing as vintage estate pipes or special editions with distinct markings and rare, ornate designs, like those from the ’70s and ’80s. They represent the pinnacle of Dunhill’s luxury offerings, blending traditional pipe-making with precious metals for a distinctive, refined smoking experience.

I turned to work on the pipe itself. I reamed the bowl with a PipNet pipe reamer using the cutting heads 2 and 3. I finished the reaming with a Savinelli Fitsall Pipe Knife. I sanded the walls of the bowl with 220 grit sandpaper wrapped around a piece of dowel. I used a brass bristle wire brush to clean off the debris in the sandblast on the rim top. The sandblast was clean and dry with no debris in the valleys of the sandblast.I cleaned out the inside of the shank and the stem with alcohol, cotton swabs and both bristle and regular pipe cleaners.I scrubbed the bowl with undiluted Murphy’s Oil Soap and a tooth brush. I worked over the finish with the brush and then rinsed it off with warm water. I dried it off with a soft cloth. I polished the gold ferrule and the stem cap with a jeweller’s cloth to remove the oxidation and to protect the gold from further oxidation. The shine looks very good at this point. I rubbed the briar down with Before & After Restoration Balm. I worked it into the briar with my fingertips and a horsehair shoe brush to work it into the nooks and crannies of the sandblast finish. The product works to clean, enliven and preserve the briar. I let it sit for 10 minutes then I buffed it with a cotton cloth to deepen the shine. The briar really comes alive with the balm. I set the bowl aside and turned to address the stem. I sanded the stem surface with 320-3500 grit 2×2 inch pads. I wiped the stem down with an Obsidian Oil cloth after each sanding pad.I polished the vulcanite with micromesh sanding pads – 1500-12000 grit pads. I wiped it down with Obsidian Oil after each sanding pad. I used Before & After Pipe Polish – both Fine and Extra Fine to further polish the stem. This 1972 Dunhill Shell Briar 60F/T Gold Spigot Billiard has a beautiful, unique Dunhill Sandblast finish made in 1972. The rich Shell Briar finish that is identified with some great grain around the bowl and shank. It has some great rugged sandblast that Dunhill specialized in making. The polished 14K gold ferrule and stem cap look very good. The polished black vulcanite spigot stem adds to the mix. I put the stem back on the bowl and buffed the pipe with Blue Diamond on the buffing wheel being careful to not buff the stamping. I gave the bowl and the stem multiple coats of carnauba wax on the buffing wheel and followed that by buffing it with a clean buffing pad. I hand buffed the pipe with a microfiber cloth to deepen the shine. The finished Dunhill Shell Briar 60F/T Gold Spigot Billiard is quite nice and feels great in the hand. Give the finished pipe a look in the photos below. The dimensions of the pipe are Length: 5 ¾ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 33 grams/1.16 ounces. This one will be going into my own personal collection. Thanks for walking through the restoration with me as I worked over another beautiful pipe Thanks for your time.