A Crack Pinning Tutorial


Charles put together this tutorial on the pinning and repair of the pipe we worked on together. Since it would be new territory for a lot of folks, he broke it out into its own post. It’s not nearly as daunting as it sounds. The worst you could do is over-drill a hole and give yourself another fill to fix. 😉

Charles and I will be following up on the stability of the repair after I have had a chance to fire up the pipe a few times.

DadsPipes

Pipe forums and other discussion groups are full of posts asking about crack repairs, especially to pipe bowls. Bowl cracks are generally the result of either accident, abuse or neglect – accidental drops or impacts can crack the wood, as can outright abuse like whacking the pipe against a hard surface to knock dottle out of the bowl. Cracks caused by neglect are usually due to a failure to maintain the level of cake (carbon buildup) inside the tobacco chamber.

Cake forms on the walls of the chamber when the pipe is smoked. Tars, ash Cake Pressureand carbon combine to form a dense, heat resistant layer that is actually beneficial to the briar pipe up to a point. The ideal cake thickness is about the thickness of a dime, at which point it adds a layer of insulation to the tobacco chamber that helps protect the briar walls from burnouts. Too much cake…

View original post 1,298 more words

Advertisements

2 thoughts on “A Crack Pinning Tutorial

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s