Tag Archives: Preben HolmBen Wade pipes

Next in line – A Ben Wade Golden Walnut Hand Made


Blog by Steve Laug

As I have mentioned in the last few blogs, Jeff picked up some amazing freehand pipes lately. When I was in Idaho for my mom’s funeral I packed them and brought them to Canada with me. There was a Soren Hand Carved, a Granhill Signature, a Ben Wade Golden Walnut, a Veeja 900 C6 and a Viggo Nielsen Hand Finished. All were hand crafted and had interesting shapes and finishes. Some had full plateau rim tops, some partial plateau rim. Tonight I started working on them. The next pipe I chose was a Ben Wade Golden Walnut Freehand. My brother had done the entire cleanup – reaming, scrubbing the exterior and cleaning the mortise and the airway in the shank and stem. That left me the finishing work on it. The bowl has a smooth finish with some plateau on the rim top and shank end. The pipe is a sitter. The shank flares toward the stem that is not the original but similar. The finish on the pipe was in excellent condition. The vulcanite stem had tooth chatter on the top and bottom at the button. Jeff had cleaned the rim top and removed the debris in the plateau. He had scrubbed the exterior with Murphy’s Oil soap and removed the dust and grime that had accumulated there. He reamed the bowl with a PipNet reamer and touched it up with a Savinelli Fitsall Pipe Knife. He cleaned the interior of the mortise and the airway in the shank and the stem with alcohol, cotton swabs and pipe cleaners. It came to me clean and ready to touch up and polish. The stem was cleaned but had tooth chatter on the top and underside near the button and on the surface of the button. I took close up photos of the rim top and the shank end to show the condition of the plateau. I also took photos of the stem to give a clear picture of what I had when I started. I took a photo of the underside of the shank to show the stamping there. It read Ben Wade over Golden Walnut. Under that was stamped Hand Made in Denmark. I refreshed my memory of the history of Ben Wade pipes. I remembered some, but had forgotten much. I looked on Pipedia to refresh myself. Here is the link, https://pipedia.org/wiki/Ben_Wade. I summarize in part below.

Young Copenhagen master pipemaker Preben Holm had made a meteoric career heading a pipe manufacture employing 45 people at the age of 22! But around the turn of 1970/71 he was in major financial difficulties. His US distributor, Snug Harbour Ltd. in New York City, left him in the lurch. Holm had three unpaid invoices on his desk and another large shipment was ready for the USA, when Snug Harbour’s manager told him on the phone that there was no money at all on the account to pay him.

So the Dane went to New York for an almost desperate search for a new distribution partner. He made contacts with Lane Ltd. and met Herman G. Lane in February 1971. Lane Ltd. had no interest in Holm’s serial pipes produced at that time but so much the more in the hand-carved freehands because the hype for Danish freehands and fancies in the States was still on it’s way to the climax then. The meeting resulted in an agreement to start a cooperation. Lane insisted to improve the quality considerably and in return he assured to be able to sell essentially larger quantities.

Holm went back home to work on new samples with all-new designs and altered finishes for Lane. Both, Lane and Holm, agreed that it would be unwise to sell the pipes under Preben Holm’s name as long as Snug Harbour had a considerable stock of Preben Holm pipes and might sell them pipes at very low prices just to bring in some money. So on Mr. Lane’s proposal it was determined to use the name Ben Wade belonging to Lane Ltd. Lane spend considerable amounts of money for advertising the new brand in the big magazines– the centerpiece being whole-page ads showing a very exclusive Seven Day’s Set.

The cooperation with Lane Ltd. proved to be an eminent business success for both partners. Within a very short time Ben Wade Handmade Denmark sold in much larger quantities and at higher prices than they had ever dreamed of. And the hype these freehands and fancy pipes caused went on unbroken long after Herman G. Lane deceased. Preben Holm – obviously much more brilliant in pipe making than in pipe business – was in major troubles again in 1986 and had to sack most of his staff. The Ben Wade production was significantly lowered but continued until his untimely death in June of 1989.

From that I knew that the pipe in my hands came from the period between 1971 and Preben Holm’s death in 1989. It bears the Ben Wade stamp which also says that it was made for the American pipe market under the direction of Herman Lane of Lane Ltd. Armed with that information I turned my attention to restoring the pipe. I started with the clean bowl, I rubbed the bowl down with Before & After Restoration Balm to deep clean the briar bowl and shank. The product works to clean, enliven and protect the briar. I hand rubbed it with my fingers, working it into the exterior of the pipe. I wiped it off and buffed it with a soft cloth to polish it. The pipe really began to have a rich shine. I took some photos of the bowl at this point to mark the progress in the restoration. I set the bowl aside and turned my attention to the stem. I sanded out the tooth chatter out of both sides of the stem with 220 grit sandpaper. I worked over the surface with sandpaper to remove the tooth chatter and the oxidation.I polished the vulcanite stem with micromesh sanding pads – wet sanding with 1500-2400 grit pads and dry sanding with 3200-12000 grit pads. I wiped the stem down after each pad with Obsidian Oil to protect and polish the stem. When I finished with the last pad I gave it a final coat of oil and set aside to dry. I polished stem and bowl with Blue Diamond to polish out the remaining small scratches. I gave the bowl and the stem multiple coats of carnauba wax and buffed the pipe with a clean buffing pad to raise the shine. I hand buffed it with a microfiber cloth to deepen the shine. The pipe polished up pretty nicely. The plateau on the rim top and shank end and the smooth black and brown contrast finish work very well with the black vulcante stem. The finished pipe is shown in the photos below. I have worked on quite a few Ben Wade pipes over the years and several of them have been Golden Walnut pipes. Preben Holm was an amazing innovator in terms of shapes, flow and finishes on his pipes. The dimensions are Length: 6 1/2 inches, Height: 2 1/2 inches, Outside diameter of the bowl: 2 inches wide and 2 1/4 inches long, Chamber diameter: 7/8 inches. This one is already sold to a fellow in Kentucky who collects Ben Wade pipes. I am looking forward to hearing from him once he receives it. It is a beauty! Thanks for walking through the restoration with me as I worked over this Ben Wade Golden Danish Freehand. I have other Freehands that I will be working on in a variety of shapes and sizes in upcoming blogs.  

Advertisements