A Reborn Kaywoodie Relief Grain Billiard

I went to work on this old timer Sunday afternoon. I had picked it up on a recent trip to the US for a visit. It has an amazing blast that is deep and craggy. The pictures give a bit of an idea how beautiful the grain is but in hand it is an amazing tactile experience. It is very rugged yet the ridges are smooth to the touch. The bowl still had tobacco inside and a hard cake inside that was uneven. The rim of the bowl was coated with tars and oils that filled all the grooves of the blast to the point that they were smooth. They were also running down the front of the bowl along the outer lip of the rim. The stem was badly oxidized and over-turned so that it would not line up when tightened. The stem was amazingly bite free and only had a minimum of tooth chatter so it would be easy to work on. The finish was in good shape but was dirty. This one would take more work on the stem than the bowl. ImageImageImageImage

I cleaned out the old tobacco with a dental pick and then reamed the bowl until it was bare wood. The cake was too uneven to leave much behind. I then used pipe cleaners and cotton swabs dipped in isopropyl alcohol to clean out the shank and the inside of the bowl. To scrub down the bowl I coated it with undiluted Murphy’s Oil Soap and used a tooth brush to scrub it down. I scrubbed the rim with a brass wire tire brush. I wiped the bowl down to remove the soap and then reapplied it to the rim and continued scrubbing until the grooves of the blast were clean and visible. I also used a micromesh pad 2400 grit to polish the metal band on the shank and the face of the metal tenon. Once that was finished I set the bowl aside and turned my attention to the stem.

I put the stem on the pipe and buffed it with Tripoli to remove the oxidation that would easily come off. Then I heated the 4 hole KW stinger with my heat gun and realigned the overturned stem. Once it cooled I took it back to the worktable to sand on the stem. I used 240 grit sandpaper to break up the oxidation and bring the surface back to a matter black. I was careful around the inserted KW emblem as they are fairly thin. I then used 400 and 600 grit wet dry sandpaper to finish the initial cleaning. Once the stem is fairly smooth, no tooth chatter, no more oxidation then I use the regimen of micromesh pads to sand it to a polished look. This time I added three new grits of pad to the process. I normally have used 1500-6000. This time I added 7000, 8000 and 12000 to the mix and the shine is remarkable. I finished by buffing it quickly and lightly with White Diamond and then gave the stem several coats of carnauba and the bowl several coats of Halcyon II Wax. ImageImageImageImage

1 thought on “A Reborn Kaywoodie Relief Grain Billiard

  1. upshallfan

    I have found finishing with the 12,000 grit micromesh does take the shine to another level. Micromesh says that grade leaves scratches that are not visible to the naked eye.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.