by Steve Laug

The next pipe I chose to work on was one that we purchased on 12/28/2024 from as part of an estate that belonged to a pipeman and carver, Byron Harwood from Missoula, Montana, USA. This unique, capped all briar pipe was one of Byron’s own handmade pipes. As with the previous pipe of Byron’s this one does not bear any stamping. It is a lovely piece of briar that was shaped with an apple bowl and sandblasted to highlight the grain. The airway in the mortise and shank are well executed and the draught is very good. The bowl had a moderated cake and there was some darkening and lava around the inner edge of the bowl and top. The cap on the bowl was pressure fit and attach to a shank band. It sealed the bowl so it would be a good pipe to load and carry in a pocket or bag for later use. It is not a wind cap. The chain and band are tarnished and are made of Sterling Silver. Smoking the pipe had removed the stain and finish on the inside of the cap. The stem is briar in a half saddle shape. It is smooth and nicely grained. It has been stained with a tan stain and has a great fit to the shank. The tenon is a black Delrin that is set in the stem. The button is well finished and the exit of the airway is orific or round rather than slotted. The pipe fit well in the hand and was short and stubby like a nose warmer. There was a charm to it! Here is what it looked like when Jeff received it. He took some photos of the rim top and bowl from various angles to give me a clear picture of the condition of the rim top and bowl. You can see the light cake in the bowl and the darkening and light lava coat on the inner edge and rim top. He also took photos of the all briar stem. It is dirty and has light tooth chatter on both sides ahead of the button. Jeff took some photos of the sides of the bowl to show the condition of the finish on the pipe. The photos showed rich sandblast, highlighting grain around the bowl sides. Under the dust it was a nice looking bowl and cap. It is a nose warmer sized pipe sandblasted briar cap. It is on pipes like this that I really appreciate Jeff’s thorough cleaning process. It gives me real freedom in dealing with pipes when they arrive here. He reamed it with a PipNet pipe reamer and got rid of the cake. He cleaned up the reaming with a Savinelli Fitsall Pipe Knife so that we could see the walls of the bowl and assess for damage. He cleaned the internals of the shank and stem with alcohol, pipe cleaners and alcohol. He scrubbed the exterior with undiluted Murphy’s Oil Soap and a tooth brush. He rinsed the pipe under warm water. He dried it off with a cloth and then let it air dry. The stem was scrubbed with Murphy’s Oil Soap and a tooth brush at the same time as the bowl. Once it was rinsed off, it came out looking very good. The finish on the bowl and the rim top and cap cleaned up nicely. I took pictures of the pipe to show how it looked when I unpacked it. The pictures show it with the cap in place on the top of the bowl and with it removed. I took a photo of the pipe with the briar stem removed to show the Delrin tenon and the look of the parts of the pipe to give a sense of size and perspective.I polished the bowl rim top and the inside of the bowl cap with micromesh sanding pads – dry sanding with 1500-12000 grit pads and wiping it down after each sanding pad with a damp cloth. I worked some Before & After Restoration Balm into the surface of the briar with my finger tips. I let it sit on the bowl for 10 minutes and then buffed it off with a paper towel and soft cloth. The product is a great addition to the restoration work. It enlivens, enriches and protects the wood while giving it a deep glow. It is a product I use on every pipe I restore. I set the bowl aside and turned to the all briar stem. I polished it with micromesh sanding pads – dry sanding with 1500-12000 grit sanding pads. I wiped it down after each sanding pad with Obsidian Oil. I polished it with Before & After Pipe Stem Polish – both Fine and Extra Fine. I buffed the stem with a soft cloth to raise the shine. I gave it a final wipe down with Obsidian Oil to protect it. I don’t know what it is about finishing a restoration but I have to tell you that it is my favourite part of the process. It is the moment when everything that I have worked on comes together. I can compare it to where I started and there is always satisfaction that it looks better than when we picked it up. As always, I put this Byron Harwood All Briar Nose Warmer back together and buffed it with Blue Diamond on the buffing wheel. I gave the bowl and the stem multiple coats of carnauba wax. I buffed the pipe with a clean buffing pad and hand buffed it to raise the shine. It is fun to see what the polished bowl looks like along with the polished All Briar stem. This Byron Harwood All Briar Capped Nose Warmer is a great looking pipe and I am sure that it will be comfortable in hand when smoking as it is light and well balanced for a pipe of this size. Have a look at it with the photos below. The dimensions are Length: 5 inches, Height: 1 ¾ inches without the cap and 2 ¼ inches with the cap, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 2.79 ounces/78 grams. It is another beautiful pipe and one that will be on the rebornpipes store soon. You can find it in the section of Pipes by American Pipe Makers. If you are interested in adding it to your collection let me know. Thanks for walking through the restoration with me as I worked over this pipe. Thanks to each of you who are reading this blog.

As always, I encourage your questions and comments as you read the blog. Thanks to each of you who are reading this blog. Remember we are not pipe owners; we are pipe men and women who hold our pipes in trust until they pass on into the trust of those who follow us.