Falcon Restored


Blog by Al Jones (aka “upshallfan”)

We had some glorious weather in the Maryland/Virgina area in September and one beautiful Sunday, the wife and I drove down to Winchester, VA in the MGB. We toured Patsy Cline’s home (that has been on our list). Winchester is also home to JB Hayes Tobacconist, a fine pipe shop. I didn’t find anything there, but we also made several antique/junk shop stops as I was on the hunt for an old cabinet to re-purpose for my pipe collection. I didn’t have any luck with a cabinet, but did spy this old Falcon in a case. For a few bucks, it was mine ($3 from memory).

The bowl top was pretty beat up and scorched, but the rest of the pipe and stem looked in decent shape. I had never seen a metal pipe in person to this point and was curious as to how it was assembled or if it held any restoration challenges. Here are some pictures of the pipe as I found it.

Falcon_Before

Falcon_Before (1)

Falcon_Before (2)

Falcon_Before (3)

The pipe broke down without drama and the bowl top screwed off nicely, but the threads were just about perfect. I reamed the bowl, which has a fairly thick cake. The bowl was quite tall and I thought it would look best topped and refinished. I sanded the bowl top smooth with some 320 grit paper flat on my workbench, followed by 800 grit wet paper, using water. I immersed the bowl in a shot glass full of isopropyl alcohol, you can’t do that with a briar pipe!

Falcon_Progress (2)

While the pipe bowl was soaking, I turned my attention to the metal bowl and stem. The stem had some teeth abrasions but no real dents. To me, the stem was somewhat “plasticky” but the fellow who ended up purchasing this one said they are quite durable and clenching doesn’t seem to harm them. The bottom of the metal bowl had some mild build-up, which I removed with some fine steel wool. I buffed the metal parts with white diamond and then red rouge. The metal shined up nicely, but I suspect will dull quickly over time.

Falcon_Progress

Falcon_Finished (6)

Falcon_Progress (1)

I used 1500 and then 2000 grit wet sandpaper on the stem and was able to remove most of the abrasions. I then polished it with 8000 and 12000 grit micromesh cloth. It was also buffed with white diamond.

Falcon_Finished (1)

Once the bowl was soaked, the stain sanded off nicely with 800 grit paper. This revealed a number of fills. I decided a two-stage stain would cover up those fills nicely. I warmed the bowl with a hair dryer, then applied a full coat of black stain. I lit the stain with flame to “set” it into the grain. After it dried, I sanded the stain off with alcohol and 800 grit paper. I then removed more of the black stain with tripoli on the buffer. A very light, almost transparent coat of brown stain was applied over the black.

Falcon_Progress (3)

Falcon_Progress (5)

Once dry, the bowl was buffed with white diamond and then several coats of carnuba wax. I’m very pleased with the finish and the two stage stain hid the fills nicely.

Falcon_Bowl_Pix (2)

Falcon_Bowl_Pix (1)

Falcon_Bowl_Pix

Falcon_Finished (2)

And finally the finished pipe.

Falcon_Finished

11 thoughts on “Falcon Restored

  1. Dave

    Nice job. It has rekindled an intrest in smoking metal….maybe a good outdoor pipe? Your two part stain came out fantastic. I’ll be trying that in the future. Thanks for sharing your project.

    Reply
  2. Larry

    Nice job, Al. I was actually amazed at how nice the bowl came out w/your two-step staining. I think this is one of the nicest-looking bowls I’ve seen on a metal pipe!!

    Reply
    1. upshallfan Post author

      Yep, that’s why I sold it (well, also to pay for recent purchases…). It was only 35 grams. The guy I sold it to smokes them while fishing & hunting and keeps his pricier briar pipes at home. I can see it working well in that environment, particularly if you acquire several bowls for a weekend hunt trip, etc.

      Reply
  3. upshallfan Post author

    Interesting on the tear down Steve. This one twisted right out. Have you ever replaced the plastic stem on a Falcon or metal pipe?

    Reply
      1. upshallfan Post author

        I had to stop chosing “stars” with phone, I kept only hitting 3….
        Thanks, I thought you had done that before. I have a buddy in PA who wants a lucite bit on his Falcon – if you are interested in doing this for him, let me know.

        Reply
  4. Chiz Szymanski (@redchiz)

    That’s a fabulous piece of work and has inspired me to have a go on a rather tatty Falcon I own myself. One question though if I may: did you have any issues removing and then reseating the mouthpiece and inner tube? I was always led to believe that these should not be disassembled in this way.

    Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.