By Al Jones
The second Comoy’s on my bench this weekend was a little bit of a mystery. This one also didn’t require a lot of work, but the nomenclature was all but invisible. With a magnifying loupe, I think it is a three digit shape, starting with a 4. I found a shape 434, at SmokingPipes, which is a round shape Liverpool. So, I believe this pipe is also a shape 434, but the finish is undetermined (probably a tradition). The pipe has the three-piece C stem logo, so it was made before 1981. Below we see the shape example from SmokingPipes (this one a Blue Riband!)
Below is the pipe as received. There was a heavy layer of oxidation on the stem, with a few teeth indentions. A heavy layer of build-up was on the bowl-top and it had a very thick cake in the bowl. Tobacco buildup in the shank prevented the stem from being inserted flush.
I used a lighter to lift the teeth indentions on both sides of the stem. A worn scotchbrite was used to remove the build-up on the bowl top. The bowl was reamed, then soaked with alcohol and sea salt. While the bowl was soaking, the stem was soaked in a mild oxy-clean solution. I put a dab of grease on the C stem logo.
Following the soak, the shank was cleaned and stem inserted. Now that the shank was clean, the stem was able to be inserted flush and it had a nice, snug fit. I removed the oxidation with 400, 800, 1,000, 1,500 and 2,000 grade wet paper, followed by 8,000 micromesh. The stem was then polished with White Diamond and Meguiars plastic polish.
The bowl was buffed with White Diamond and several coats of Carnuba wax. Below is the finished pipe.