Abrasives Conversion Chart

Blog by Greg Wolford

Not long ago I was searching to find the equivalent of one sandpaper grit to another, trying to find what most closely matched 1500 micro mesh in sandpaper. I don’t remember finding what I wanted, not easily anyway. Today I ran across this conversion chart that was exactly what I wanted: It came with my last order of micro mesh and I didn’t realize of remember it. So I thought it might be a handy resource to share here for easy access for everyone.

Here is the more complete Chart that Al comments about below:

8 thoughts on “Abrasives Conversion Chart”

Dave November 5, 2013 at 9:30 am

Thanks to Greg, Steve, and all contributors. I find this information valuable.

LikeLike

Reply ↓
Larry October 19, 2013 at 12:33 pm

Thanks, guys!!!

LikeLike

Reply ↓
1. Greg Post authorOctober 19, 2013 at 12:35 pm
  
  You’re welcome (from all of is I’m sure)!
  
  LikeLike
  
  Reply ↓
rebornpipes October 19, 2013 at 12:31 pm

Greg I have added Al’s chart to your original post. It is good stuff you guys have found and I thought I would put a copy here.

LikeLike

Reply ↓
1. Greg Post authorOctober 19, 2013 at 12:35 pm
  
  Great idea, Steve. As soon as I “found” mine I immediately thought “That needs archived on the blog!”
  
  LikeLike
  
  Reply ↓
  1. rebornpipes October 19, 2013 at 12:36 pm
    
    Thanks to both of your guys for finding and bringing that to the blog. Great reference material.
    
    LikeLike
    
    Reply ↓
upshallfan October 19, 2013 at 10:59 am

Greg:
I have an even more complete chart in PDF. I put a copy in my Drop-Box and you can download a copy here if you like:

Click to access Micro%20Mesh%20Grit%20Size%20Conversion%20Chart.pdf

(anyone who reads this can grab a copy as well)

LikeLike

Reply ↓
1. Greg Post authorOctober 19, 2013 at 12:16 pm
  
  Thanks, Al! I’m going after it now.
  
  LikeLike
  
  Reply ↓