Daily Archives: October 28, 2014

Some Interesting Notes on Jobey Pipes – Chris Chopin


Blog by Chris Chopin

jobeylogoChris emailed me this piece while I was traveling and thought I would be interested in it. He was correct. Chris seems to dig up some interesting information when he goes on the information hunt. Thanks Chris.

Very interesting pipe! I’ve never seen a Jobey without the link. Apologies in advance for the wall of text to follow, I’m a Jobey fan.

Immediate thought is that it must be made before 1969, which I believe is when Wally Frank got the patent on the Link. Before that, the Jobey Company is a bit of a fun mystery. They made pipes, as Pipedia will tell you here: http://pipedia.org/wiki/Jobey for a lot of different companies but the origins seem to be shrouded in mystery, and most people claim that the origins were in England, followed by American production, and then a later move to St. Claude. I think that’s wrong. Jobey’s Brooklyn Briar is present at least as of ’69. That’s where they patented the Link, that’s where the roots are.

There’s not a lot of chatter about it, but if you can lay your hands on a copy of “The Tobacco World”, Volume 61, from 1941, there is a brief mention that reads “Norwalk Pipe Expands” and in the body states that Norwalk Pipe Corporation, “manufacturers of Jobey and Shellmoor pipes”, is moving to larger offices at 218 East Twenty-Sixth Street, NYC, as announced by Louis Jobey, president of that company. Norwalk is listed as one of the alternate distributors for Jobey on Pipedia, but without mention of Louis actually working there at the time.

Before that, the first mention of Jobey seems to be back in 1915, when two guys named Ulysses and Louis Jobey of Brooklyn, New York had a neat patent for an odd sort of cavalierish pipe in 1915, here’s the link: http://www.google.com/patents/USD46998

But less than four years later, in 1918, there’s a notice in the Brooklyn Daily Eagle on November 6th to the effect that Louis Jobey declared bankruptcy in the District Court, with final hearing scheduled for December 1918. And in an even sadder turn, that same month sees a funeral notice for Lorraine Jobey, the daughter of Mr. and Mrs. Louis Jobey, formerly of Brooklyn but now living in Moline Illinois at the home of Mr. and Mrs. George E. Hutchinson. The little girl evidently died in a fall.

I never found anything else on Ulysses Jobey except that he evidently had a “junior” after his name or a son by the same name. Because Ulysses Jobey, Jr. was listed as the vice president in New Jersey of Lakewood Pipe Company Inc., a maker of smoker’s articles, in the 1922 New York Co-partnership and Corporation Directory for Brooklyn. Given the timing I’m guessing Ulysses, Jr. was the brother.

Now this is just too much Brooklyn to be coincidence, so here’s my take on the real Jobey history. I think the company was started by two brothers in Brooklyn in the teens with a new idea for a pipe, and failed amidst terrible tragedy. I think one brother went to one company and another to the other, but it was Louis who continued making Jobey pipes through the 40s under that name, despite (I am guessing) no longer owning the company. And I think it was the Norwalk Company that was bought out by Wally Frank in the pre-link days. To my mind it’s always been American.

Now again, there’s a lot of speculation here. But I think it’s leaving too much to coincidence to read the history of Jobey without mention of those two brothers, I think they’re the actual Jobeys. Sorry for the wall of text, hope this was interesting and not excessive, lol.

A Spitfire by Lorenzo Mille Billiard – My First Dabble with Black Super Glue – Robert M. Boughton


Guest Blog by Robert M. Boughton
Member, North American Society of Pipe Collectors
http://www.roadrunnerpipes.com
http://about.me/boughtonrobert
Photos © the Author

“There is nothing insignificant in the world. It all depends on the point of view.”
—Johann Wolfgang von Goethe (1749-1832), German author, playwright and poet
Robert head INTRODUCTION
Perspective is the key to everything, from the incredible diversity of the daily activities to the personal, often unique worldviews of everyone on the planet. Take, by way of an extraterrestrial example, the Sombrero Galaxy shown above, an edge-on spiral 50,000 light years from one side to the other (half the size of our own) and 28 million light years from Earth. Discovered hidden within the constellation Virgo in 1781 and named by French astronomer Charles Messier because of his point of view at the time, the Sombrero seen head-on would have a much different appearance. In other words, looks can be deceiving.

And so I present the initial side view (somehow I neglected to photograph the left side) of the Spitfire by Lorenzo Mille – which, compared to Starbuck’s Venti, meaning 20, translates in the same Italian to 1000 – that lives up to its name in terms of its huge size, and lasts far longer than any of the aforementioned coffee chain’s drinks.Robert1 The massive, gorgeous billiard (measuring 5-3/4″ x 2″ in length and height with an outer rim diameter of 1-3/8″ and chamber dimensions of 7/8″ x 1-7/8″), as seen in this photo side angle as I received it in a pipe lot I bought online, is nothing less than gigantic all around. Even the relatively flat shank leading into the stem is an inch across. But, as will be shown in the next part of this blog, from other angles the pipe, which at least on my screen is the actual size, had its share of problems.

RESTORATION
Here it was from those other views.Robert2 Robert3 Robert4 Robert5 The blackened rim and badly caked chamber were easy enough to fix. I started on the chamber with my reamer and took out the majority of the carbon buildup, then switched to 150-grit paper followed by 400 before finishing with 800. The rim came clean with super fine steel wool before 1500 micromesh, then 2400, 3600 and at last 8000. So far, that is the finest grade of micromesh I have used, and it worked well.

Most of the stem cleaned up with 1500 micromesh and some 400-grit paper on the lip followed by 1500 again, and then 2400 to smooth it out.Robert6 Still, the tooth marks remained, and since my recent order of Black Hyper Bond, a.k.a. Super Glue, had arrived, I was presented with my first opportunity to try it on a stem. The hard part proved to be not squirting out too much.Robert7 A couple of hours later, long after I had prepared the nice hunk of briar for buffing, I returned to the stem and tried 2400 micromesh to remove the dried glue bump. After that, I finished it with 3600. Robert8 As I noted, this was my first time filling in a hole, so the result is not perfect, but I think it looked much better than before.

Every inch of the wood, to my continuing amazement, was as pristine and unblemished as the first side angle shows. This is the only pipe I have ever restored that had not even a single scratch on it, except for the rim, which ended up fine as I described. This was also one of the few times (all of the others on meerschaum restorations) where I only needed to buff the rim to make it shine again with its natural color, not needing to re-stain it.

This brings me, with rather unusual speed, to the final buffing, which I accomplished using my standard methods: red and white Tripoli followed by White Diamond on the stem, and white Tripoli, White Diamond and carnauba on the fine, already lustrous wood just for the sake of it.Robert9 Robert10 Robert11 Robert12 Robert13 Robert14 CONCLUSION
I was a little giddy trying out the Black Hyper Bond to repair the bite mark in the stem, and as I wrote before, the result is not as well done as I hope to achieve in the future and returning to some of my previous restores that some of you with excellent memories may recall needed similar work. But from my perspective, it’s a good start – better than government work at least, as the saying goes.

Grazzie Mille for your time and patience!

Pipe Mentoring and the New Pipe Smoker – BillyPM


Blog by Billy PM

When I read Billy’s original post on Pipe Smoker Unlimited I immediately wrote him and asked if I could post his piece here. It is a well written article that gives some basic startup advice to the beginning pipe smoker in a clear and manageable manner. I think that many of us have similar beginner pipe smoking stories like Billy’s. I asked Billy to write a bit of an introduction of himself to the rebornpipes readers. Thank you for letting me put this on the blog. I appreciate your willingness to let this be posted here. Without further adieu here is his article:

Introduction

I’ve been a pipe smoker twice in my life. The first time was in college and I certainly gave it the old college try. I saved up for what I thought were reasonably good pipes, but that was the only thing I did right. I made it up as I went along, smoking fast and furiously. Years of tongue bite later I simply gave up. Nothing this painful, no matter how cool, could be worth continuing. Broke my heart.

Years later, around 2000, I came out of the cigar craze and decided to try pipes again. But THIS time I had the internet, which included a sweet little newsgroup called ASP. What a difference! There were dozens of experienced pipers more than happy to help me get my act together and tell me what I had been doing wrong. Which was just about everything. 14 years and many online forums later I’m a happy smoker, with a small collection of great performing pipes and a small cellar of my favorite tobaccos.

When I recently helped a good friend get started with a pipe and some tobacco, I thought I’d just set down some basic truths that I wish somebody had told me way back when. There’s always more to learn in our gentle art, but there’s no need to reinvent the wheel, either.

Pipe Mentoring
downloadI recently hooked up a good friend of mine, who expressed interest in our gentle art, with a sweet-smoking old Czech billiard, some Carter Hall, BBF, Pembroke, pipe cleaners, and a pipe tool, and the following start-up advice. There’s no need for any veterans to slog through this, but I thought I’d post it here in case it was of any use to anybody.

I emailed him this:

Pipe smoking is the only kind of smoking you have to actually learn. It’s an art and will reward you many times over once you get the hang of it. Trial and error is the way to go and plenty of both. It’s amazingly subjective, meaning that what works for me may or may not work for you. But here’s some good starting points.

— Packing a pipe properly is pretty crucial. Too tight a pack and the draw will be difficult and the burn a problem. Too loose a pack will burn way too hot and will taste nasty. Pack your pipe in thirds or so, smallish pinches that you push down with your pipe tamper (that metal tool) or your finger. Then draw air through the pipe. Too loose will feel like no resistance and too tight will feel like too much trouble. It should draw like sucking on a straw- a bit of resistance, but not a lot. Trial and error.

— Light the entire top surface of the tobacco with your trusty bic. Three or four good draws to get the top all charred. Then tamp down the surface gently, just to even it up (some tobacco may have risen up from the flame). Then light again. Don’t honk on it, just slow gentle draws.

— Here’s the fun part. You’re now smoking the son of a gun. The slower you smoke the better. Remember, you’re sucking on a fire through a 4 inch tube. Don’t burn your tongue if you can help it. If you do, wait til it heals up to try again. Slow smoking is the best flavor by far, and it means the smoke should be entering your mouth VERY slowly and gently. Just a mere trickle really. Novice pipers want to see a lot of smoke, but veterans want to see as little as possible. Keep the pipe barely lit. When it goes out, and it will, relight it. Do NOT try to keep it from going out by drawing rapidly. This leads to tongue bite.

–Use your tamper to very lightly press down the ashes on top of the embers. Maybe once every 5 or 7 minutes is enough. Don’t compress the tobacco much, just keep the embers in contact with the rest of the tobacco. And if and when the pipe starts to gurgle a little just run a pipe cleaner through the stem and rock on. No need to smoke all the way to the bottom at this stage unless you want to. Just use the spoon part of the pipe tool and dig the remaining baccy (called the dottle) out of the pipe. Don’t knock it out on your heel unless you want to break the pipe. Run one last cleaner through to dry it a bit and Bob’s your uncle.

— A briar pipe needs to be broken in when it’s new, and it’ll taste pretty heinous til it gets some cake built up on the walls of the chamber. The one I gave you is already broken in and is a pretty good, though cheap, pipe. Once smoked it’s a good idea to rest your briar and let it dry out — maybe a day or two minimum. So if you want to smoke a pipe more often than every couple three days, guess what? More pipes!!! If you get to that stage holler at me and we’ll go through that stuff. It won’t ruin your pipe if you smoke it a lot right now, but long term it’s not a good idea.

— There are like a bazillion pipe tobacco blends in the known universe, and finding your faves is part of the fun. I gave you three different blend from some of the basic categories. Sweet aromatics are OK, but not really the best tasting to most confirmed pipers, so I didn’t include any– don’t think I HAVE any. If you wanna try some I can recommend a few. But Virginia tobaccos are my fave, although they can be the hardest to smoke, being hotter burning and sometimes bitier than most. So don’t try the Best Brown Flake for a while. Carter Hall, a time-honored old burley blend should be your first pipeful. And your second, third, and fourth. It burns easily, tastes nice and won’t fry your mouth. The Esoterica blend I included is what’s called an “English” blend– meaning it’s got Orientals and Latakia along with some Virginias. Those first two are smoky, incense-like and delicious to those of us who like that sort of thing, but will send most women and small animals screaming from the room. Smoke at your own peril. I could go on and ON about various tobaccos. Be patient.

— Any tobacco you may buy should probably be dried out a bit before smoking. It’s generally sold too moist and needs to be air dried until it feels pliable but dry to the touch. Trying to smoke wet tobacco is frustrating. It won’t get lit, stay lit, and will fry your tongue. Steam is not what you want, both for best flavor and comfort. Oh, and don’t inhale unless you really want to. The smoke is alkaline and harsh to the lungs (which ain’t got no taste buds anyhow).

OK that’s enough for now. You should visit http://www.tobaccoreviews.com — a GREAT site with thousands of blends reviewed by hundreds of smokers. Also, try to find Pipe Smokers Unlimited forum (Google it). It’s a fabulous bunch of guys (and one girl) from all over the world yakking about this stuff. And I have been one of the regulars there for a while.

I hope he enjoys his new pipe. I’ll keep you posted if he checks in.