• This Peterson’s “Donegal” Rocky 338 Bent Billiard with a vulcanite taper Fish-tail stem can be yours today. It was stamped on the underside of the bowl and shank and on the heel, it was stamped Peterson’s [over] “Donegal” Rocky [followed by] the shape number 338. There is a Sterling Silver band on the shank that is stamped K&P [over] Peterson’s. The rich dark brown/black stain really highlights the beautiful rustication around the bowl and shank. It looks great with the polished stem. It really has that classic Peterson’s Shape that catches the eye. The pipe is comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions of the pipe are Length: 5 inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 1/8 inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 37 grams/1.31 ounces. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $110USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Beautiful Republic Era Peterson’s System Standard 309 Bent Billiard with a P-lip stem can be yours today. This Peterson’s System Standard 309 is a great looking pipe. The stamping on the shank is clear and readable. It was stamped vertically on the left side and reads Peterson’s [over] System [over] Standard. On the right it is stamped Made in the Republic of Ireland (in three lines) followed by the shape number 309. The nickel ferrule on the shank end was oxidized and is stamped on the top and left side K&P [over] the three common hallmarks on System pipes with Nickel ferrules – a shamrock, a wolf hound, and a tower. That is followed by Peterson’s. The smooth brown finish really make the grain stand out on the polished pipe and the contrast with the nickel ferrule and the black vulcanite P-lip stem is beautiful. The pipe is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions of the pipe are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 2.01 ounces/57 grams. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $110USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Made in Ireland Killarney “A Peterson’s Product” 381 Billiard with a vulcanite taper P-lip stem can be yours today. It was stamped Killarney in script on the left side of the shank. On the right it is stamped “A Peterson’s [over] Product” [over] Made in Ireland (in two lines). The shape number 381 is near the bowl/shank junction. It has a smooth, natural finish with great grain around the bowl and shank. It looks great with the polished stem. It really has that classic Peterson’s Shape that catches the eye. The pipe is comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions of the pipe are Length:6 ½ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 1.38 ounces/39 grams. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $125USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Republic Era Peterson’s Donegal Rocky 15 Billiard with a vulcanite taper P-lip stem can be yours today. It was stamped on the underside of the bowl and shank and on the heel, it was stamped Peterson’s [over] “Donegal” Rocky [over] the shape number 15. Following that it read, Made in the Republic of Ireland (in three lines). There is a band on the shank that is stamped on the left side and reads K&P in shields [over] Sterling Silver. Under those stamps there are three hallmarks – Hibernia seated, Crowned Harp for country of manufacture and a date letter in this case that was not readable. The rich dark brown/black stain really highlights the beautiful sandblast around the bowl and shank. It looks great with the polished stem. It really has that classic Peterson’s Shape that catches the eye. The pipe is comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: 7/8 of an inch. The weight of the pipe is 29 grams/1.06 ounces. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $100USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Republic Era Peterson’s “Sterling Silver” 606S Sandblast Pot with a vulcanite saddle P-lip stem can be yours today. It was stamped on the underside of the shank and reads 606S the shape number on the heel of the bowl followed by the three line Made in the Republic of Ireland followed by Peterson’s [over] “Sterling Silver”. The heavily tarnished band is stamped with K&P in shields [over] Sterling [over] Silver. To the right that it has three hallmarks – Hibernia seated arm on a harp (signifies country of manufacture), a crowned harp designating Sterling quality and finally a Date Letter mark – in this case it is a lower case “s” (1983). The rich dark brown/black stain really highlights the beautiful sandblast around the bowl and shank. It looks great with the polished stem. It really has that classic Peterson’s Shape that catches the eye. The pipe is comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 ½ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 40grams/1.41 ounces. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $135USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Republic Era Peterson’s Rosslare XL13 Straight Bulldog with a acrylic 9mm taper, fishtail stem can be yours today. The pipe was stamped on the left side and read Peterson’s [over] Rosslare. On the right side it had the three-line Republic of Ireland stamp [over] the shape number XL13. On the left underside of the diamond shank it is stamped HUBER [over] MUNCHEN. The rich red stain really highlights the beautiful grain around the bowl and shank. It looks great with the polished taper fishtail acrylic stem. It really has that classic Peterson’s Shape that catches the eye. The pipe is comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 5 ½ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: 7/8 of an inch. The weight of the pipe is 44 grams/1.55 ounces. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $145USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Beautiful Republic Era Peterson’s Made Irish Second Bent Billiard can be yours today. This Republic Era Peterson’s Irish Second Bent Billiard is a great looking pipe. The pipe is stamped on the underside of the shank and reads IRISH SECONDS [over] Made in the Republic of Ireland.The rusticated black and brown stain really give the rustication depth and texture. The contrast with the thin brass shank band and the black vulcanite stem is beautiful. It really has that classic Peterson’s Shape that catches the eye. The pipe is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions of the pipe are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 2.36 ounces/67 grams.If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $65USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Beautiful Republic Era Peterson’s System Standard 307 Bent Billiard with a P-lip stem can be yours today. This Peterson’s System Standard 307 is a great looking pipe. The stamping on the shank is clear and readable. It was stamped vertically on the left side and reads Peterson’s [over] System [over] Standard. On the right it is stamped Made in the Republic of Ireland (in three lines) followed by the shape number 307. The nickel ferrule is stamped K&P Petersons. The smooth brown finish really make the grain stand out on the polished pipe and the contrast with the nickel ferrule and the black vulcanite P-lip stem is beautiful. The pipe is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions of the pipe are Length: 6 ½ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 2.43 ounces/69 grams. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $115USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This K&P Irish Made Army 101 Billiard with vulcanite army bit can be yours today. It is stamped on the left side of the shank and clearly reads K&P [over] Irish Made. On the right side it is stamped Made in the Republic of Ireland [three lines]. The shape number 101 is stamped to the right of that next to the bowl/shank junction. The nickel ferrule is stamped K&P [over] Petersons. The rich brown stain really highlights the beautiful grain on the bowl and shank. It looks great with the polished nickel ferrule vulcanite army stem. There are some deep scratches in the briar on the sides of the bowl. All remain but I have not repaired then. I left them as part of the pipe’s journey. It really has that classic Peterson’s Shape that catches the eye. The pipe is comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 5 ¾ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 39 grams/1.41 ounces. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $100USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Peterson’s Made in the Republic of Ireland “Dublin” 264 Canadian with vulcanite taper stem can be yours today. This Canadian was stamped on the topside of the shank and read Peterson’s [over] “Dublin”. It was stamped on the underside and read Made in the Republic of Ireland (three lines). On the right side of the shank near the bowl it is stamped with the shape number 264. The brown stain really highlights the beautiful grain around the bowl and shank. It looks great with the polished saddle vulcanite stem. The triple band – 2 brass sandwiching a nickel band is a great addition. It really has that classic Peterson’s Shape that catches the eye. The pipe is comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 6 inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 1/8 inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 31 grams/1.09 ounces. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $110USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Beautiful Republic Era Peterson’s System Standard 1307 Bent Billiard with a P-lip stem can be yours today. This Peterson’s System Standard 1307 is a great looking pipe(the shape number has the additional 1 that signifies that it was made for Canadian Import. Check the blog on it). The stamping on the shank is clear and readable. It was stamped on the left side and reads Peterson’s [over] System [over] Standard. On the right it is stamped Made in the Republic of Ireland (in three lines) followed by the shape number 1307. The nickel ferrule is stamped K&P Petersons [over] three faux hallmarks. The smooth brown finish really make the grain stand out on the polished pipe and the contrast with the nickel ferrule and the black vulcanite P-lip stem is beautiful. The pipe is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions of the pipe are Length: 6 ½ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe 2.54 ounces/71 grams. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $115USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

  This slideshow requires JavaScript.
• This Beautiful Republic Era Peterson’s Product “Shamrock” 338 Bent Billiard can be yours today. This Republic Era Peterson’s Shamrock 338 Bent Billiard is a great looking pipe. It is stamped on the left side of the shank and read SHAMROCK. It was also stamped on the right side and reads “A PETERSON’S [over] PRODUCT” over MADE IN THE REP. OF IRELAND (3 lines) with the shape number 338 next to the bowl. There was also the Shamrock logo “S” on the left side of the taper stem. The smooth brown finish really make the grain stand out on the polished pipe and the contrast with the black vulcanite stem is beautiful. It really has that classic Peterson’s Shape that catches the eye. The pipe is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 5 inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 41grams/1.45 ounces. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $65USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

This slideshow requires JavaScript.

• This Beautiful Republic Era Peterson’s Kapet 106 Straight Billiard with a P-lip stem can be yours today. This Peterson’s Kapet Billiard is a great looking pipe. The stamping on the shank is clear and readable. It was stamped Peterson’s [over] Kapet on the left side of the shank. On the right it is stamped Made in the Republic of Ireland (in three lines) followed by the shape number 106. The smooth brown finish really make the grain stand out on the polished pipe and the contrast with the black vulcanite fishtail stem is beautiful. The large Billiard shape really catches the eye. The pipe is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 6 inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 53 grams/1.87 of an ounce. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $90USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

This slideshow requires JavaScript.

• This Beautiful, Classic Republic Era Peterson’s “Kildare” XL90 Bent Billiard with a P-lip filter stem can be yours today. This Peterson’s “Kildare” is a great looking pipe. The stamping on the shank is clear and readable. The left side is stamped Peterson’s [over] “Kildare”. On the right side it was stamped Made in the Republic of Ireland (3 lines). On the right of shank near the bowl it is stamped with the shape number XL90.  The smooth brown finish really make the grain stand out on the polished pipe and the contrast with the black vulcanite stem is beautiful.  It really has that classic Peterson’s Bent Billiard Shape that catches the eye. The pipe is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 5 ½ inches, Height: 2 inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 66 grams/2.33 ounces. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $100USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

This slideshow requires JavaScript.

• This Peterson’s Made in Ireland Kapet Taper Stem Billiard can be yours today. It was stamped on the sides of the shank. On the left side and it read Peterson’s [over] KAPET. On the right side it read MADE IN [over] IRELAND. The brown stain really highlights the grain around the bowl and shank. It looks great with the polished vulcanite stem. It really has that classic Peterson’s Shape that catches the eye. The pipe is comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 1/8 inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 30 grams/1.06 of an ounce. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $70USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

This slideshow requires JavaScript.

• This Beautiful Peterson’s Republic Era “Kapruf” 24S Saddle Stem Sandblast Billiard can be yours today. It was stamped on the flat underside in the center of the shank and read Made in the Republic of Ireland (three lines). To the right of that it is stamped Peterson’s [over] Kapruf. To the left of the Republic stamp, on the heel was the shape number 24S. The sandblast is not deep but really reveals the grain around the bowl and shank. It looks great with the polished saddle vulcanite stem. It really has that classic Peterson’s Shape that catches the eye. The pipe is comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 5 ½ inches, Height: 1 ½ inches, Outside diameter of the bowl: 1 inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 29 grams/.99 of an ounce. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $70USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

This slideshow requires JavaScript.

• This Beautiful Republic Era Peterson’s Product “Shamrock” 15 Billiard can be yours today. This Republic Era Peterson’s Shamrock 15 Billiard is a great looking pipe. It was stamped on the left side of the shank and read SHAMROCK. It was stamped to the right of the shank and reads “A PETERSON’S PRODUCT” over MADE IN THE REP. [over] OF IRELAND (3 lines) with the shape number 15 next to the bowl. The smooth brown finish really make the grain stand out on the polished pipe and the contrast with the black vulcanite stem is beautiful. It really has that classic Peterson’s Shape that catches the eye. The pipe is a comfortable pipe to hold in the hand. The finished pipe is shown in the photos below. The dimensions are Length: 5 ¾ inches, Height: 1 ¾ inches, Outside diameter of the bowl: 1 ¼ inches, Chamber diameter: ¾ of an inch. The weight of the pipe is 34grams/1.20oz. If you are interested in carrying on the previous pipeman’s legacy with this pipe send me a message or an email. PRICE $65USD + $15USD Postage to be paid by buyer. If product is being shipped to locations other than the US contact me before completing the sale at slaug@uniserve.com

This slideshow requires JavaScript.