29 | October | 2023 | rebornpipes

By Al Jones

This Dunhill Shell billiard belongs to a member of the PipesMagazine.com forum, and was found at small antique store in Tennessee. He collects antique tools and pipes and spied this sitting on a shelf while searching for tools.

The small, two digit date stamp is a bit worn, but I identified it as a 25. The pipe is a Shape 6103 Shell, and that two digit stamp tells me it was made in 1985. The handy Pipepedia Dunhill dating guide confirmed the date. The nomeclature told me to add 25 to the 1960 start date.

The four digit 6103 shape number breaks down to:

Group 6 size

Tapered stem

03 Billiard shape

The pipe had some heavy build-up on the bowl top and a very heavy cake. The stem was oxidized and it had some teeth indentions on both sides of the button. The pipe is just under two ounces, and clenched, teeth indentions would have been inevitable. Below is the pipe as it was received.

I used a piece of Scotch-Brite with water to remove the build-up on the bowl top. That lightened the stain, so I used some Fieblings Medium brown to match the rest of the bowl. The cake was removed with the largest bit in my Pipenet reamer set, and the bowl was in excellent condition. I soaked the bowl with alcohol and sea salt. Following the soak, the shank was scrubbed with a bristle brush dipped in alcohol.

I used a heat gun to lift some of the teeth indentions. The remaining indentions, on the bottom, were shallow enough to let well enough alone. The stem was mounted and the oxidation was removed with 600, 800, 1500 and 2000 grade wet paper. The stem was then buffed with White Diamond and Meguiars Plastic Polish. I used Halcon wax on the sandblast finish for the final buff.

Below is the finished pipe.

By Al Jones

I’m not adding many pipes to my personal collection these days, but British made, small bent billiards always catch my attention. I love Taylor era Ashtons, particularly in the XX size (43 grams!) The Sovereign grade/finish is also a favorite. This one also had a somewhat rare tapered stem that I prefer. The has the date code stamp of 12 shows the pipe was made in 1992 (1980 + 12). Also as a bonus, the pipe is drilled perfectly and easily passes a cleaner (not always a given for Taylor era Ashtons).

The finish was faded, but nomenclature sharp. The top had some very heavy build-up, that I hoped was not scorching. The stem was lightly oxidized, with no teeth indentions. Unpacking the pipe, the restoration appeared promising. Below is the pipe as it was received.

I removed the build-up on the bowl top with a piece of Scotch-Brite and water. Gratefully, once removed,there was no damage other than a faded stain. I used White Diamond to freshen the finish followed by several coats of Carnuba wax.

I removed the very slight cake with my PIpenet reamer set,and soaked the bowl with sea salt and alcohol. Following the soak, the stem was mounted and oxidation removed with White Diamond and Meguiars Plastic Polish.

Below is the finished pipe that I am very pleased to add to my collection. I also include a picture of my small Bent Billiards that are in my collection.